The URL can be used to link to this page

Agenda 01/14/2020 Item #16A21 (ITB #19-7607 - Traffic Operations Signal Component & Hardware)01/14/2020 EXECUTIVE SUMMARY Recommendation to award Invitation to Bid (“ITB”) No. 19-7607, "Traffic Operations Signal Components and Hardware," to the following vendors: Control Technologies, Inc., Econolite Control Products, Inc., Express Supply, Inc., ITS Plus, Inc. dba ITS Plus 3 Inc., Peek Traffic Corporation, Rhythm Engineering, LLC, Temple Inc., and Transportation Control Systems, Inc. OBJECTIVE: To purchase signal components and hardware used in the maintenance, repair, and construction of traffic signals, flashing beacons, and count stations within Collier County. CONSIDERATIONS: Collier County currently maintains 205 traffic signals, 90 flashing beacons, and 26 count stations. The purpose of the solicitation is to purchase equipment required to maintain that infrastructure. On June 28, 2019, the Procurement Services Division released notices of ITB No. 19 -7607 to 6,592 vendors for Traffic Operations Signal Components & Hardware. Interested vendors downloaded seventy-four (74) bid packages, and the County received nine (9) bids by the July 30, 2019 deadline. Recommended awards were established on a lowest price per line item basis to a primary and secondary vendor (where available) as reflected in the attached bid tabulation. Several items listed in the bid are proprietary resulting in a price from a single vendor. To ensure Collier County received competitive prices, staff compared bid prices with the current Florida Department of Transportation APL Traffic Equipment Agency Term Contract bid, the previous Collier County Traffic Operations Signal Components and Hardware bid, and based on staff purchasing experience. Staff determined that Bid No. 19-7607 prices are competitive within the industry. Based on a primary/secondary vendor award per the attached bid tabulation, staff recommends awarding ITB No. 19-7607 to the following vendors: Control Technologies, Inc., Econolite Control Products, Inc., Express Supply, Inc., ITS Plus, Inc. dba ITS Plus 3 Inc., Peek Traffic Corporation, Rhythm Engineering, LLC, Temple Inc. and Transportation Control Systems, Inc. Staff found Wavetronix, LLC non- responsive for its failure to submit any of the required bid forms. If the Board approves this item, staff will utilize the Board approved standard County Purchase Order or a County purchasing card to procure these items. FISCAL IMPACT: The Primary source of funds for this equipment is Transportation Operating Fund (101) Traffic Operations Cost Center (163630). Additional Funds for this equipment shall come from each individual using department budgets as needed. The countywide annual spend is estimated at an amount of $600,000. GROWTH MANAGEMENT IMPACT: This recommendation is consistent with the County’s Growth Management objectives and produces no negative impact. LEGAL CONSIDERATIONS: This item is approved as to form and legality and requires majority vote for Board approval. -SRT RECOMMENDATION: To award ITB No. 19-7607, "Traffic Operations Signal Components and Hardware," on a primary/secondary basis (where available), as memorialized in the attached bid tabulation, to the following vendors: Control Technologies, Inc., Econolite Control Products, Inc., Express Supply, Inc., ITS Plus, Inc. dba ITS Plus 3 Inc., Peek Traffic Corporation, Rhythm Engineering, LLC, Temple Inc., and Transportation Control Systems, Inc. Prepared by: Randy Ensell, Project Manager, Transportation Engineering Division, Growth Management Department. 16.A.21 Packet Pg. 775 01/14/2020 ATTACHMENT(S) 1. 19-7607 Bid Tabulation (PDF) 2. 19-7607 Control Technologies Proposal (PDF) 3. 19-7607 Control_Insurance (PDF) 4. 19-7607 Econlite Proposal (PDF) 5. 19-7607 Econlite_Insurance (PDF) 6. 19-7607 Express Proposal (PDF) 7. 19-7607 Express_Insurance (PDF) 8. 19-7607 Express_WC Exemption (PDF) 9. 19-7607 ITS Proposal (PDF) 10. 19-7607 ITS_Insurance (PDF) 11. 19-7607 Notice of Recommended Award (PDF) 12. 19-7607 Peek Traffic Proposal (PDF) 13. 19-7607 Peek_Insurance (PDF) 14. 19-7607 Rhythm Proposal (PDF) 15. 19-7607 Rhythm_Insurance (PDF) 16. 19-7607 Solicitation (PDF) 17. 19-7607 Temple Proposal (PDF) 18. 19-7607 Temple_Insurance (PDF) 19. 19-7607 Transportation Control Proposal (PDF) 20. 19-7607 TransportationControl_Insurance (PDF) 16.A.21 Packet Pg. 776 01/14/2020 COLLIER COUNTY Board of County Commissioners Item Number: 16.A.21 Doc ID: 11066 Item Summary: Recommendation to award Invitation to Bid (“ITB”) No. 19-7607, "Traffic Operations Signal Components and Hardware," to the following vendors: Control Technologies, Inc., Econolite Control Products, Inc., Express Supply, Inc., ITS Plus, Inc. dba ITS Plus 3 Inc., Peek Traffic Corporation, Rhythm Engineering, LLC, Temple Inc., and Transportation Control Systems, Inc. Meeting Date: 01/14/2020 Prepared by: Title: Project Manager – Transportation Engineering Name: Randy Ensell 12/06/2019 9:12 AM Submitted by: Title: Division Director - Transportation Eng – Transportation Engineering Name: Jay Ahmad 12/06/2019 9:12 AM Approved By: Review: Growth Management Department Anthony Khawaja Additional Reviewer Completed 12/06/2019 9:27 AM Transportation Engineering Leandro Goicoechea Additional Reviewer Completed 12/06/2019 11:55 AM Growth Management Department Christine Arnold Level 1 Reviewer Completed 12/06/2019 1:00 PM Procurement Services Opal Vann Level 1 Purchasing Gatekeeper Completed 12/09/2019 8:05 AM Transportation Engineering Jay Ahmad Additional Reviewer Completed 12/09/2019 9:35 AM Procurement Services Viviana Giarimoustas Additional Reviewer Completed 12/09/2019 2:51 PM Growth Management Operations Support Heather Meyer Additional Reviewer Completed 12/10/2019 11:26 AM Growth Management Operations Support Christopher Johnson Additional Reviewer Completed 12/11/2019 8:07 AM Growth Management Department Gene Shue Additional Reviewer Completed 12/11/2019 1:37 PM Procurement Services Evelyn Colon Additional Reviewer Completed 12/11/2019 5:16 PM Procurement Services Sandra Herrera Additional Reviewer Completed 12/12/2019 9:23 AM Procurement Services Catherine Bigelow Additional Reviewer Completed 12/15/2019 11:05 AM Growth Management Department Thaddeus Cohen Department Head Review Completed 12/16/2019 4:33 PM Growth Management Department Judy Puig Deputy Department Head Review Skipped 12/18/2019 2:43 PM County Attorney's Office Scott Teach Level 2 Attorney Review Completed 12/20/2019 11:42 AM Office of Management and Budget Laura Wells Level 3 OMB Gatekeeper Review Completed 12/20/2019 12:16 PM 16.A.21 Packet Pg. 777 01/14/2020 Budget and Management Office Mark Isackson Additional Reviewer Completed 12/20/2019 2:41 PM County Attorney's Office Jeffrey A. Klatzkow Level 3 County Attorney's Office Review Completed 12/23/2019 11:00 AM County Manager's Office Nick Casalanguida Level 4 County Manager Review Completed 01/03/2020 12:13 PM Board of County Commissioners MaryJo Brock Meeting Pending 01/14/2020 9:00 AM 16.A.21 Packet Pg. 778 Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Econolite Express Supply Inc. ITS Plus Inc Peek Traffic Corporation Rhythm Engineering Temple Inc. Transportation Control Systems Inc. Wavetronix Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 1 CCTO 1502 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Three (3) Section Horizontal configuration per MUTCD Part 4, Figure 4D-6 (B – Typical Arrangements) Ordering Number Logic: CCTO 1502: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 309.71$ 2 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Three (3) Section Vertical configuration per MUTCD Part 4, Figure 4D-6 (B – Typical Arrangements) Ordering Number Logic: CCTO 0000: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 309.71$ 3 CCTO 1506 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Three (3) Section Horizontal configuration per MUTCD Part 4, Figure 4D-10 (B – Typical Arrangements) Ordering Number Logic: CCTO 1506: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 322.94$ 4 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Three (3) Section Vertical configuration per MUTCD Part 4, Figure 4D-10 (B – Typical Arrangements) Ordering Number Logic: CCTO 0000: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 322.94$ 5 CCTO 1509 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Four (4) Section Horizontal configuration per MUTCD Part 4, Figure 4D-12 (B – Typical Arrangements) Ordering Number Logic: CCTO 1509: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 432.55$ 6 CCTO 1510 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Five (5) Section Horizontal configuration per MUTCD Part 4, Figure 4D-11 (B – Typical Arrangements) Ordering Number Logic: CCTO 1510: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 526.57$ 7 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Four (4) Section Vertical configuration per MUTCD Part 4, Figure 4D-12 (B – Typical Arrangements) Ordering Number Logic: CCTO 0000: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 432.55$ 8 CCTO 1512 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head: Five (5) Section Vertical Cluster configuration per MUTCD Part 4, Figure 4D-11 (B – Typical Arrangements) Ordering Number Logic: CCTO 1512: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 1 Each Does not meet specifications 526.57$ 9 CCTO 1513-R Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red. Ordering Number Logic: CCTO 1513-R: 12” Dialight LED Red Signal or approved equivalent 1 Each 48.00$ 10 CCTO 1513-Y Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Yellow. Ordering Number Logic: CCTO 1513-Y: 12” Dialight LED Yellow Signal or approved equivalent 1 Each 52.00$ 11 CCTO 1513-G Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Green. Ordering Number Logic: CCTO 1513-G: 12” Dialight LED Green Signal or approved equivalent 1 Each 49.00$ 12 CCTO 1513a-RA Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red. Ordering Number Logic: CCTO 1513a-RA: 12” Dialight LED Arrow Red Signal or approved equivalent 1 Each 53.00$ 13 CCTO 1513a-YA Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Yellow. Ordering Number Logic: CCTO 1513a-YA 12” Dialight LED Arrow Yellow Signal or approved equivalent 1 Each 56.00$ 14 CCTO 1513a-GA Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Green. Ordering Number Logic: CCTO 1513a-GA 12” Dialight LED Arrow Green Signal or approved equivalent 1 Each 54.00$ 15 CCTO 1513b-RU Signal, Vehicle Traffic Control LED inserts per the following: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, U-Turn Red. Ordering Number Logic: CCTO 1513b-RU: 12” Dialight LED U-Turn Red Signal or approved equivalent 1 Each 44.00$ 16 CCTO 1513b-YU Signal, Vehicle Traffic Control LED inserts per the following: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, U-Turn Yellow. Ordering Number Logic: CCTO 1513b-YU: 12” Dialight LED U-Turn Yellow Signal or approved equivalent 1 Each 50.00$ 17 CCTO 1513b-GU Signal, Vehicle Traffic Control LED inserts per the following: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, U-Turn Green. Ordering Number Logic: CCTO 1513b-GU: 12” Dialight LED U-Turn Green Signal or approved equivalent 1 Each 98.00$ 18 CCTO 1513-RF Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red and Solid Yellow. Operating Voltage: 10-30V DC optical unit. Ordering Number Logic: CCTO 1513-RF: 12” Dialight 10-30 V DC LED Red Signal, Part Number: 433-1210-005XL or approved equivalent 1 Each 54.00$ 19 CCTO 1513-YF Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red and Solid Yellow. Operating Voltage: 10-30V DC optical unit. Ordering Number Logic: CCTO 1513-YF: 12” Dialight 10-30 V DC LED Yellow Signal, Part Number: 433-3230-905XL or approved equivalent 1 Each 44.00$ 20 CCTO 1518 Closure Assembly, Vehicle Traffic Control Signal per the following and per State of Florida Approved Products List: Signal head closure kit Ordering Number Logic: CCTO 1518: Pelco Products, Inc. SE-3054-P02 or approved equivalent 1 Each 7.96$ 8.20$ 21 CCTO 1530 Signal Louver, Vehicle Traffic Control per the following and per State of Florida Approved Products List: GPL Geometrically Programmed Louvers Ordering Number Logic: CCTO 1530: Pelco Products Inc. Part Number GL-1010-UC-P34 or approved equivalent 1 Each 179.90$ 197.00$ 22 CCTO 1532 Signal Visor, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Signal Head 12" Tunnel Visor Ordering Number Logic: CCTO 1532: Mobotrex housing Visor or approved equivalent 1 Each 13.50$ 17.13$ 23 CCTO 3002a Back plates, Horizontal 1-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Ordering Number Logic: CCTO 3002a: Transportation Control Systems Part No. BP-5001B-F or approved equivalent 1 Each 55.41$ 54.00$ 24 CCTO 3002b Back plates, Horizontal 1-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Ordering Number Logic: CCTO 3002b: Transportation Control Systems Part No. BP-5001B-C or approved equivalent 1 Each Does not meet specifications 49.00$ 25 CCTO 3002c Back plates, Horizontal 1-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Ordering Number Logic: CCTO 3002c: Transportation Control Systems Part No. BP-5001B-N or approved equivalent 1 Each 49.00$ 26 CCTO 3004a Back plates, Horizontal 2-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Ordering Number Logic: CCTO 3004a: Transportation Control Systems Part No. BP-5002B-F or approved equivalent 1 Each 62.66$ 64.00$ Primary Secondary Not Awarded 19-7607 Traffic Operations Signal Components & Hardware Provide all inclusive pricing, no additional costs will be accepted. Awards shall be made to a Primary and Secondary on a per line item basis. The quantities listed in the bid schedule are approximate and are for the purpose of bid evaluation. The County reserves the right to order such quantities as may be required during said period but does not guarantee any minimum or maximum to be ordered during the period specified. Control Technologies Inc. Additional equivalents can be placed on a separate sheet of paper.1 of 20 16.A.21.a Packet Pg. 779 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 27 CCTO 3004b Back plates, Horizontal 2-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Ordering Number Logic: CCTO 3004b: Transportation Control Systems Part No. BP-5002B-C or approved equivalent 1 Each Does not meet specifications 58.00$ 28 CCTO 3004c Back plates, Horizontal 2-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Ordering Number Logic: CCTO 3004c: Transportation Control Systems Part No. BP-5002B-N or approved equivalent 1 Each 58.00$ 29 CCTO 3008a Back plates, Horizontal 3-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Ordering Number Logic: CCTO 3008a: Transportation Control Systems Part No. BP-5003B-F or aproved equivalent 1 Each 70.66$ 72.00$ 30 CCTO 3008b Back plates, Horizontal 3-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Ordering Number Logic: CCTO 3008b Transportation Control Systems Part No. BP-5003B-C or approved equivalent 1 Each Does not meet specifications 64.00$ 31 CCTO 3008c Back plates, Horizontal 3-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Ordering Number Logic: CCTO 3008c Transportation Control Systems Part No. BP-5003B-N or approved equivalent 1 Each 64.00$ 32 CCTO 3010a Back plates, Horizontal 4-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Ordering Number Logic: CCTO 3010a: Transportation Control Systems Part No. BP-5004B-F or approved equivalent 1 Each 98.22$ 85.00$ 33 CCTO 3010b Back plates, Horizontal 4-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Ordering Number Logic: CCTO 3010b: Transportation Control Systems Part No. BP-5004B-C or approved equivalent 1 Each Does not meet specifications 78.00$ 34 CCTO 3010c Back plates, Horizontal 4-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Ordering Number Logic: CCTO 3010c: Transportation Control Systems Part No. BP-5004B-N or approved equivalent 1 Each 78.00$ 35 CCTO 3012a Back plates, Horizontal 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Ordering Number Logic: CCTO 3012a: Transportation Control Systems Part No. BP-5005B-F or approved equivalent 1 Each 109.06$ 102.00$ 36 CCTO 3012b Back plates, Horizontal 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Ordering Number Logic: CCTO 3012b: Transportation Control Systems Part No. BP-5005B-C or approved equivalent 1 Each Does not meet specifications 90.00$ 37 CCTO 3012c Back plates, Horizontal 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Ordering Number Logic: CCTO 3012c: Transportation Control Systems Part No. BP-5005B-N or approved equivalent 1 Each 90.00$ 38 CCTO 3014a Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Cluster Mast Arm Mount Ordering Number Logic: CCTO 3014a: Transportation Control Systems Part No. BP-5007B-F or approved equivalent 1 Each 150.65$ 144.00$ 39 CCTO 3014b Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Cluster Mast Arm Mount Ordering Number Logic: CCTO 3014b: Transportation Control Systems Part No. BP-5007B-C or approved equivalent 1 Each Does not meet specifications 140.00$ 40 CCTO 3014c Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Cluster Mast Arm Mount Ordering Number Logic: CCTO 3014c: Transportation Control Systems Part No. BP-5007B-N or approved equivalent 1 Each 140.00$ 41 CCTO 3016a Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Eagle Signal Cluster Span Wire Mount Ordering Number Logic: CCTO 3016a: Transportation Control Systems Part No. BP-5021B-F or approved equivalent 1 Each 158.91$ 144.00$ 42 CCTO 3016b Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: Peek Signal Cluster Span Wire Mount Ordering Number Logic: CCTO 3016b: Transportation Control Systems Part No. BP-5021B-C or approved equivalent 1 Each 140.00$ 43 CCTO 3016c Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: Louvered with 2” Reflective 3M Tape Fits Signal Head Brand: McCain Signal Cluster Span Wire Mount Ordering Number Logic: CCTO 3016c: Transportation Control Systems Part No. BP-5021B-N or approved equivalent 1 Each 140.00$ 44 CCTO 1540 Signal, Pedestrian Traffic Control per the following and per State of Florida Approved Products List: Housing: 16” X 18” Symbol: Full Hand & Full Person with egg crate type visor Ordering Number Logic: CCTO 1540: Mobotrex housing Model SG7SZ20C3FFF10-21 or approved equivalent & Dialight Corporation, Model 430-6479-805XF or approved equivalent 1 Each 235.99$ 235.00$ 45 CCTO 1542 Signal, Pedestrian Traffic Control Module per the following and per State of Florida Approved Products List: Optical Unit: LED Single module Symbol: Full Hand & Full Person. Ordering Number Logic: CCTO 1542: Dialight Corporation, Model 430-6479-805XF or approved equivalent 1 Each 118.00$ 139.00$ 46 CCTO 2902a Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 1 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2902a: Pelco Products, Inc., Model Number: EC-3075-1-80-PNC or approved equivalent 1 Each 126.78$ 140.00$ 47 CCTO 2902b Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 2 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2902b: Pelco Products, Inc., Model Number: EC-3075-2-80-PNC or approved equivalent 1 Each 132.33$ 147.00$ 48 CCTO 2902c Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 3 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2902c: Pelco Products, Inc., Model Number: EC-3075-3-80-PNC or approved equivalent 1 Each 139.18$ 153.00$ 49 CCTO 2902d Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 4 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2902d: Pelco Products, Inc., Model Number: EC-3075-4-80-PNC or approved equivalent 1 Each 146.45$ 159.00$ 50 CCTO 2902e Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 5 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2902e: Pelco Products, Inc., Model Number: EC-3075-5-80-PNC or approved equivalent 1 Each 153.72$ 166.00$ Additional equivalents can be placed on a separate sheet of paper.2 of 20 16.A.21.a Packet Pg. 780 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 51 CCTO 2904a Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 1 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2904a: Pelco Products, Inc. Model Number: EC-3075-1-120-PNC or approved equivalent 1 Each 135.29$ 151.00$ 52 CCTO 2904b Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 2 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2904b Pelco Products, Inc., Model Number: EC-3075-2-120-PNC or approved equivalent 1 Each 140.85$ 157.00$ 53 CCTO 2904c Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 3 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2904c: Pelco Products, Inc., Model Number: EC-3075-3-120-PNC or approved equivalent 1 Each 147.65$ 163.00$ 54 CCTO 2904d Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 4 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2904d: Pelco Products, Inc., Model Number: EC-3075-4-120-PNC or approved equivalent 1 Each 154.92$ 170.00$ 55 CCTO 2904e Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 5 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2904e: Pelco Products, Inc., Model Number: EC-3075-5-120-PNC or approved equivalent 1 Each 162.28$ 176.00$ 56 CCTO 2906a Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 0 Cable Length: 80 inches Paint No Color Ordering Number Logic: CCTO 2906a: Pelco Products, Inc., Model Number: EC-3075-0-80-PNC or approved equivalent 1 Each 79.27$ 85.00$ 57 CCTO 2906b Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 0 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2906b: Pelco Products, Inc., Model Number: EC-3075-0-120-PNC or approved equivalent 1 Each 85.81$ 151.00$ 58 CCTO 2922a Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 1 Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2922a: Pelco Products, Inc., Model Number: SP-1006-FL-1-96-PNC or approved equivalent 1 Each 151.71$ 150.00$ 59 CCTO 2922b Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 2 Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2922b: Pelco Products, Inc., Model Number: SP-1006-FL-2-96-PNC or approved equivalent 1 Each 150.59$ 151.00$ 60 CCTO 2922c Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 3 Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2922c: Pelco Products, Inc., Model Number: SP-1006-FL-3-96-PNC or approved equivalent 1 Each 154.84$ 164.00$ 61 CCTO 2922d Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 4 Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2922d: Pelco Products, Inc., Model Number: SP-1006-FL-4-96-PNC or approved equivalent 1 Each 167.39$ 174.00$ 62 CCTO 2922e Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 5 Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2922e: Pelco Products, Inc., Model Number: SP-1006-FL-5-96-PNC or approved equivalent 1 Each 175.53$ 181.00$ 63 CCTO 2922f Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 1 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2922f: Pelco Products, Inc., Model Number: SP-1006-FL-1-120-PNC or approved equivalent 1 Each 151.87$ 161.00$ 64 CCTO 2922g Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 2 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO #2922g Pelco Products, Inc., Model Number: SP-1006-FL-2-120-PNC or approved equivalent 1 Each 152.21$ 161.00$ 65 CCTO 2922h Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 3 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO #2922h Pelco Products, Inc., Model Number: SP-1006-FL-3-120-PNC or approved equivalent 1 Each 163.18$ 175.00$ 66 CCTO 2922i Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 4 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO #2922i: Pelco Products, Inc., Model Number: SP-1006-FL-4-120-PNC or approved equivalent 1 Each 173.31$ 181.00$ 67 CCTO 2922j Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 5 Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2922j: Pelco Products, Inc., Model Number: SP-1006-FL-5-120-PNC or approved equivalent 1 Each 183.97$ 191.00$ 68 CCTO 2922k Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 1 Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2922k: Pelco Products, Inc., Model Number: SP-1006-FL-1-144-PNC or approved equivalent 1 Each 153.94$ 164.00$ 69 CCTO 2922l Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 2 Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2922l: Pelco Products, Inc., Model Number: SP-1006-FL-2-144-PNC or approved equivalent 1 Each 155.06$ 165.00$ Additional equivalents can be placed on a separate sheet of paper.3 of 20 16.A.21.a Packet Pg. 781 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 70 CCTO 2922m Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 3 Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2922m: Pelco Products, Inc., Model Number: SP-1006-FL-3-144-PNC or approved equivalent 1 Each 170.25$ 182.00$ 71 CCTO 2922n Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 4 Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2922n: Pelco Products, Inc., Model Number: SP-1006-FL-4-144-PNC or approved equivalent 1 Each 183.09$ 192.00$ 72 CCTO 2922o Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Number of Signal Head Sections: 5 Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2922o: Pelco Products, Inc., Model Number: SP-1006-FL-5-144-PNC or approved equivalent 1 Each 187.88$ 194.00$ 73 CCTO 2921a Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Mount: Vertical Cluster for Mast Arm Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2921a: Pelco Products, Inc., Model Number: SP-1008-FL-96-PNC or approved equivalent 1 Each 296.76$ 311.00$ 74 CCTO 2921b Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Mount: Vertical Cluster for Mast Arm Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2921b: Pelco Products, Inc., Model Number: SP-1008-FL-120-PNC or approved equivalent 1 Each 303.58$ 322.00$ 75 CCTO 2921c Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Mount: Vertical Cluster for Mast Arm Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2921c: Pelco Products, Inc., Model Number: SP-1008-FL-144-PNC or approved equivalent 1 Each 309.00$ 328.00$ 76 CCTO 2908a Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2908a: Pelco Products, Inc. Model Number: SP-1079-FL-96-PNC or approved equivalent 1 Each 97.06$ 100.00$ 77 CCTO 2908b Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2908b: Pelco Products, Inc. Model Number: SP-1079-FL-120-PNC or approved equivalent 1 Each 106.29$ 111.00$ 78 CCTO 2908c Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: Mast Arm Signal Hanger Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2908c: Pelco Products, Inc. Model Number: SP-1079-FL-144-PNC or approved equivalent 1 Each 109.08$ 117.00$ 79 CCTO 2928a Mast arm Astro-Brac Steller Articulating clamp Mount Assembly per the following and per State of Florida Approved Products List: Bracket Articulated Mounting. Cable Length: 96 inches Paint No Color Ordering Number Logic: CCTO 2928a Pelco Products, Inc., Part No. SP-1118-FL-96-PNC or approved equivalent 1 Each 139.93$ 149.00$ 80 CCTO 2928b Mast arm Astro-Brac Steller Articulating clamp Mount Assembly per the following and per State of Florida Approved Products List: Bracket Articulated Mounting. Cable Length: 120 inches Paint No Color Ordering Number Logic: CCTO 2928b Pelco Products, Inc., Part No. SP-1118-FL-120-PNC or approved equivalent 1 Each 142.66$ 153.00$ 81 CCTO 2928c Mast arm Astro-Brac Steller Articulating clamp Mount Assembly per the following and per State of Florida Approved Products List: Bracket Articulated Mounting. Cable Length: 144 inches Paint No Color Ordering Number Logic: CCTO 2928c Pelco Products, Inc., Part No. SP-1118-FL-144-PNC or approved equivalent 1 Each 148.59$ 156.00$ 82 CCTO 2926 Hanger Assembly, Tri-Stud per the following and per State of Florida Approved Products List: Cast Aluminum Upper and Lower Hanger Paint No Color Ordering Number Logic: CCTO 2926: Pelco Products, Inc., Part No. SP-1050-FL-PNC or approved equivalent 1 Each 95.47$ 97.00$ 83 CCTO 2924 Hanger, Disconnect per the following and per State of Florida Approved Products List: Exclude Harness Assemblies Color: Flat Black Ordering Number Logic: CCTO 2924: Pelco Products Inc., Part No.: SP-1021-FL-2-P34 or approved equivalent 1 Each 159.31$ 169.00$ 84 CCTO 2925 Disconnect Hub Assembly per the following and per State of Florida Approved Products List: Color: Flat Black Ordering Number Logic: CCTO 2925: Pelco Products Inc., Part No.: SE-5033-P34 or approved equivalent 1 Each 18.45$ 18.00$ 85 CCTO 2940 Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List: Direction: 2-Way Color: Flat Black Ordering Number Logic: CCTO 2940: Pelco Products, Inc., Part No. SP-1026-FL-P34 or approved equivalent 1 Each 62.84$ 67.00$ 86 CCTO 2942 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. Direction: 2-Way Color: Flat Black Ordering Number Logic: CCTO 2942: Pelco Products, Inc. Part No. SP-1027-FL-P34 or approved equivalent 1 Each 29.60$ 31.00$ 87 CCTO 2944 Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List. Direction: 3-Way Color: Flat Black Ordering Number Logic: CCTO 2944: Pelco Products, Inc. Part No. SP-1015-FL-P34 or approved equivalent 1 Each 100.32$ 106.00$ 88 CCTO 2946 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. Direction: 3-Way Color: Flat Black Ordering Number Logic: CCTO 2946: Pelco Products, Inc. Part No. SP-1016-FL-P34 or approved equivalent 1 Each 49.26$ 52.00$ 89 CCTO 2948 Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List. Direction: 4-Way Color: Flat Black Ordering Number Logic: CCTO 2948: Pelco Products, Inc. Part No. SP-1017-FL-P34 or approved equivalent 1 Each 110.76$ 117.00$ 90 CCTO 2950 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. Direction: 4-Way Color: Flat Black Ordering Number Logic: CCTO 2950: Pelco Products, Inc. Part No. SP-1018-FL-P34 or approved equivalent 1 Each 54.45$ 56.00$ 91 CCTO 1602 Pedestrian Bracket Assemblies, Aluminum side of pole, Tri-Stud per the following and per State of Florida Approved Products List: Tri-Stud Upper Arm Assembly Color: Flat Black Ordering Number Logic: CCTO 1602: Pelco Products Inc. Part Number: SP-1011-FL-P34 or approved equivalent 1 Each 37.75$ 39.00$ 92 CCTO 1604 Pedestrian Bracket Assemblies, Aluminum side of pole, Tri-Stud per the following and per State of Florida Approved Products List: Tri-Stud Lower Arm Assembly Color: Flat Black Ordering Number Logic: CCTO 1604: Pelco Products Inc. Part Number: SP-1012-FL-P34 or approved equivalent 1 Each 40.44$ 41.00$ 93 CCTO 1606 Hub Plate, Flat Back for Pedestrian Signal Mount per the following and per State of Florida Approved Products List: Color: Flat Black Ordering Number Logic: CCTO 1606: Pelco Products Inc., Part Number: SE-0415-P34 or approved equivalent 1 Each 14.26$ 14.00$ Additional equivalents can be placed on a separate sheet of paper.4 of 20 16.A.21.a Packet Pg. 782 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 94 CCTO 1608 Hub Plate, Pedestrian Signal Mount for Large Pole per the following and per State of Florida Approved Products List: Color: Flat Black Ordering Number Logic: CCTO 1608: Pelco Products Inc., Part Number: SE-0357-P34 or approved equivalent 1 Each 13.03$ 13.00$ 95 CCTO 1610 Hub Plate, Pedestrian Signal Mount for 4” Pole per the following and per State of Florida Approved Products List: Color: Flat Black Threads: 1 ½” NPS Ordering Number Logic: CCTO 1610: Pelco Products Inc., Part Number: EC-2053-C-P34 or approved equivalent 1 Each 10.96$ 11.00$ 96 CCTO 2108 Cabinet Accessories per the following and per State of Florida Approved Products List: Mounting Kit to install flasher cabinet to 4” post (4 1/2 “ OD) Paint No Color Ordering Number Logic: CCTO 2108: Pelco Products Inc., Part Number: SE-1100-PNC or approved equivalent 1 Each 35.24$ 38.00$ 97 CCTO 2952a Post Top Adapter (Slip Fitter), Pedestrian Traffic Control Signal per the following and per State of Florida Approved Products List Aluminum Tri-Stud Adapter for use with 4-1/2 inch OD Aluminum Pole Paint No Color Ordering Number Logic: CCTO #2952a: Pelco Products, Inc. Part No., EC-3004-T-PNC or approved equivalent 1 Each 35.35$ 37.00$ 98 CCTO 2952b Post Top Adapter (Slip Fitter), Pedestrian Traffic Control Signal per the following and per State of Florida Approved Products List Aluminum Tri-Stud Adapter for use with 4-1/2 inch OD Aluminum Pole Paint No Color Ordering Number Logic: CCTO #2952b: Pelco Products, Inc. Part No., SP-1034-FL-PNC or approved equivalent 1 Each 53.88$ 54.00$ 99 CCTO 2954a Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 4’ Paint No Color Ordering Number Logic: CCTO 2954a: Pelco Products, Inc. Part No., PB-5100-4-PNC or approved equivalent 1 Each 90.18$ 95.00$ 100 CCTO 2954b Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 5’ Paint No Color Ordering Number Logic: CCTO 2954b: Pelco Products, Inc. Part No., PB-5100-5-PNC or approved equivalent 1 Each 102.41$ 106.00$ 101 CCTO 2954c Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 6’ Paint No Color Ordering Number Logic: CCTO 2954c: Pelco Products, Inc. Part No., PB-5100-6-PNC or approved equivalent 1 Each 122.71$ 127.00$ 102 CCTO 2954d Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 7’ Paint No Color Ordering Number Logic: CCTO 2954d: Pelco Products, Inc. Part No., PB-5100-7-PNC or approved equivalent 1 Each 142.65$ 148.00$ 103 CCTO 2954e Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 8’ Paint No Color Ordering Number Logic: CCTO 2954e: Pelco Products, Inc. Part No., PB-5100-8-PNC or approved equivalent 1 Each 162.53$ 168.00$ 104 CCTO 2954f Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 9’ Paint No Color Ordering Number Logic: CCTO 2954f: Pelco Products, Inc. Part No., PB-5100-9-PNC or approved equivalent 1 Each 181.53$ 188.00$ 105 CCTO 2954g Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 10’ Paint No Color Ordering Number Logic: CCTO 2954g: Pelco Products, Inc. Part No., PB-5100-10-PNC or approved equivalent 1 Each 202.59$ 210.00$ 106 CCTO 2954h Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 11’ Paint No Color Ordering Number Logic: CCTO 2954h: Pelco Products, Inc. Part No., PB-5100-11-PNC or approved equivalent 1 Each 222.88$ 231.00$ 107 CCTO 2954i Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 12’ Paint No Color Ordering Number Logic: CCTO 2954i: Pelco Products, Inc. Part No., PB-5100-12-PNC or approved equivalent 1 Each 263.71$ 259.00$ 108 CCTO 2954j Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 13’ Paint No Color Ordering Number Logic: CCTO 2954j: Pelco Products, Inc. Part No., PB-5100-13-PNC or approved equivalent 1 Each 285.63$ 325.00$ 109 CCTO 2954k Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 14’ Paint No Color Ordering Number Logic: CCTO 2954k: Pelco Products, Inc. Part No., PB-5100-14-PNC or approved equivalent 1 Each 299.39$ 326.00$ 110 CCTO 2955a Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 4’ Paint No Color Ordering Number Logic: CCTO 2955a: Pelco Products, Inc. Part No., PB-5102-4-PNC or approved equivalent 1 Each 138.29$ 149.00$ 111 CCTO 2955b Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 5’ Paint No Color Ordering Number Logic: CCTO 2955b: Pelco Products, Inc. Part No., PB-5102-5-PNC or approved equivalent 1 Each 173.53$ 187.00$ 112 CCTO 2955c Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 6’ Paint No Color Ordering Number Logic: CCTO 2955c: Pelco Products, Inc. Part No., PB-5102-6-PNC or approved equivalent 1 Each 225.06$ 244.00$ 113 CCTO 2955d Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 7’ Paint No Color Ordering Number Logic: CCTO 2955d: Pelco Products, Inc. Part No., PB-5102-7-PNC or approved equivalent 1 Each 256.71$ 278.00$ 114 CCTO 2955e Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 8’ Paint No Color Ordering Number Logic: CCTO 2955e: Pelco Products, Inc. Part No., PB-5102-8-PNC or approved equivalent 1 Each 291.06$ 317.00$ 115 CCTO 2955f Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 9’ Paint No Color Ordering Number Logic: CCTO 2955f: Pelco Products, Inc. Part No., PB-5102-9-PNC or approved equivalent 1 Each 328.18$ 355.00$ Additional equivalents can be placed on a separate sheet of paper.5 of 20 16.A.21.a Packet Pg. 783 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 116 CCTO 2955g Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 10’ Paint No Color Ordering Number Logic: CCTO 2955g: Pelco Products, Inc. Part No., PB-5102-10-PNC or approved equivalent 1 Each 340.06$ 364.00$ 117 CCTO 2955h Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 11’ Paint No Color Ordering Number Logic: CCTO 2955h: Pelco Products, Inc. Part No., PB-5102-11-PNC or approved equivalent 1 Each 347.47$ 421.00$ 118 CCTO 2955j Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 12’ Paint No Color Ordering Number Logic: CCTO 2955i: Pelco Products, Inc. Part No., PB-5102-12-PNC or approved equivalent 1 Each 358.36$ 422.00$ 119 CCTO 2955j Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 13’ Paint No Color Ordering Number Logic: CCTO 2955j: Pelco Products, Inc. Part No., PB-5102-13-PNC or approved equivalent 1 Each 365.81$ 420.00$ 120 CCTO 2955k Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: Size: 4.5 inch OD Length: 14’ Paint No Color Ordering Number Logic: CCTO 2955k: Pelco Products, Inc. Part No., PB-5102-14-PNC or approved equivalent 1 Each 376.84$ 425.00$ 121 CCTO 2959 Sign Mountings per the following and per State of Florida Approved Products List: Anchor Bolt Sets Exterior: Galvanized Includes 4 each: Bolts, Washers and Nuts Ordering Number Logic: CCTO 2959: Pelco Products Inc., Part Number: PB-5543-GLV 1 Each 69.00$ 71.00$ 122 CCTO 2960 Pedestal Base, Aluminum, per the following and per State of Florida Approved Products List: Size: 13-5/8 inches x 13-5/8 inches x 15 inches high: Paint No Color Ordering Number Logic: CCTO 2960: Pelco Products, Inc. Part No. SP-1116-FL-GL-PNC or approved equivalent 1 Each 159.18$ 176.00$ 123 CCTO 2962 Collar Assy., Square Base, Aluminum, per the following and per State of Florida Approved Products List: Paint No Color Ordering Number Logic: CCTO 2962: Pelco Products, Inc. Part No. PB-5325-PNC or approved equivalent 1 Each 63.88$ 68.00$ 124 CCTO 2984 Traffic Signal Hardware, Components, Pipe Fittings per the following and per State of Florida Approved Products List: 1½” Grommet, Neoprene w/ Diaphragm for disconnect cable openings Ordering Number Logic: CCTO 2984: Pelco Products Inc. Part No. SE-0449-PNC or approved equivalent 1 Each 4.64$ 6.00$ 125 CCTO 2986 Traffic Signal Hardware, Components, Pipe Fittings per the following and per State of Florida Approved Products List: Double Serrated Lock ring, Aluminum Ordering Number Logic: CCTO 2986: Pelco Products Inc. Part No. SE-0451-PNC or approved equivalent 1 Each 3.25$ 3.50$ 126 CCTO 2988 Traffic Signal Hardware, Components, Span Wire per the following and per State of Florida Approved Products List: Tri-bolt Adapter, 1 ½, NPS, Aluminum Ordering Number Logic: CCTO 2988: Pelco Products Inc. Part No. SE-0502-PNC or approved equivalent 1 Each 10.54$ 10.00$ 127 CCTO 2990 Traffic Signal Hardware, Span wire Hardware Kits per the following and per State of Florida Approved Products List: Signal to Signal Mounting Kit 5/16-18 Ordering Number Logic: CCTO 2990: Pelco Products Inc. Part No. SE-4112-SS or approved equivalent 1 Each 6.19$ 7.00$ 128 CCTO 2994 Traffic Signal Hardware, Extension (Extender) per the following and per State of Florida Approved Products List: Length: 72 inches Paint No Color Ordering Number Logic: CCTO 2994: Pelco Products Inc. Part No. SE-0507-72-PNC or approved equivalent 1 Each 28.99$ 32.00$ 129 CCTO 2995 Traffic Signal Hardware, 1-Way Tri-Stud for 12” Signals, 4-1/2” OD Pole) per the following: Paint color: Flat Black Ordering Number Logic: CCTO 2995: Pelco Products Inc. Part No. SE-0567-P34 or approved equivalent 1 Each 46.38$ 48.00$ 130 CCTO 2996 Tee, Aluminum with Tri-Stud Adapter on long end & 1 ½ inch threaded on other ends per the following and per State of Florida Approved Products List: Paint color: Flat Black Ordering Number Logic: CCTO 2996: Pelco Products, Inc. Part No. SE-0513-P34 or approved equivalent 1 Each 25.69$ 26.00$ 131 CCTO 2998 Ty-back, Cable restraining Clamp Assembly per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2998: Pelco Products, Inc. Part No. AB-0506-ZN2 or approved equivalent 1 Each 7.13$ 7.00$ 132 CCTO 3026 Signal Spacer for 12” Signal Head per the following and per State of Florida Approved Products List: Color: Flat Black Ordering Number Logic: CCTO 3026: Pelco Products, Inc., Part No. EC-3012 or approved equivalent 1 Each 29.27$ 38.00$ 133 CCTO 3030 Pole Cap per the following and per State of Florida Approved Products List: Acorn Type Paint No Color Ordering Number Logic: CCTO 3030: Pelco Products Inc., Part Number: PB-5401-PNC or approved equivalent 1 Each 15.31$ 16.00$ 134 CCTO 1806 Pushbutton, Pedestrian Detector (Momentary LED Model) per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1806: Polara Bulldog III BDL3-B or approved equivalent 1 Each 75.00$ 135 CCTO 1808 Pushbutton, Pedestrian Detector, Aluminum Push Button Cup, per the following and per State of Florida Approved Products List: Aluminum cup for mounting the BullDog Pedestrian Detector. Color: Black Ordering Number Logic: CCTO 1808: Polara Aluminum Push Button Cup APBC2-B or approved equivalent 1 Each 14.00$ 136 CCTO 1810 Pushbutton, Pedestrian Detector, Adapter, per the following and per State of Florida Approved Products List: Polara round button Adapter Color: Black Ordering Number Logic: CCTO 1810: Polara Adapter PA-1B or approved equivalent 1 Each 14.00$ 137 CCTO 1812 Pushbutton, Pedestrian Detector, Audible/Tactile Pedestrian Detector with Pedestrian Station Monitor, per the following and per State of Florida Approved Products List: Push Button: ADA Compliant, raised tactile arrow on button, solid state switch rated to 20 million actuations minimum. Color: Black Ordering Number Logic: CCTO 1812: Polara 2 Wire Navigator Push Button Station EN23TN1-B or approved equivalent 1 Each 392.00$ 138 CCTO 1814 Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: One CCU shall control a minimum of 16 Push Button Stations. Ordering Number Logic: CCTO 1814: Polara 2 Wire Navigator Central Control Unit Part No. CCU2EN or approved equivalent 1 Each 2,192.00$ 139 CCTO 1816 Pushbutton, Pedestrian Detector, Audible/Tactile Pedestrian Detector with Pedestrian Station Monitor, per the following and per State of Florida Approved Products List: Push Button: ADA Compliant, raised tactile arrow on button, solid state switch rated to 20 million actuations minimum. Ordering Number Logic: CCTO 1816: Polara 2 Wire Navigator Push Button Station iN29VN1-B or approved equivalent 1 Each 400.00$ 140 CCTO 1816aa Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1816aa: Polara, 2 Wire Navigator Central Control Unit Part No. iCCU-S or approved equivalent 1 Each 2,016.00$ 141 CCTO 1816ab Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1816ab: Polara, Interconnect Board Part No. iN2-ICB or approved equivalent 1 Each 75.00$ 142 CCTO 1816ac Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1816ac: Polara, 50 Pin Connector Cable Assembly Part No. 850-390 or approved equivalent 1 Each 170.00$ 143 CCTO 1816ad Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1816ad: Polara Standard SDLC Cable Part No. iN2-SDLC-CABLE or approved equivalent 1 Each 65.00$ Additional equivalents can be placed on a separate sheet of paper.6 of 20 16.A.21.a Packet Pg. 784 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 144 CCTO 1816ae Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1816ae: Polara, 2 conductor jacketed cable Part No. iN2-2WCABLE or approved equivalent 1 Each 12.00$ 145 CCTO 1705a Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1705a: CCTO 1705a Eberle Design Inc., EDI, Part No. 2E or approved equivalent 1 Each 147.50$ Does not meet specifications 146 CCTO 1705b Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: AccurateCount Capability Ordering Number Logic: CCTO 1705b: Ordering Number Logic: Eberle Design Inc., EDI, Part No. 2EC or approved equivalent 1 Each 195.00$ Does not meet specifications 147 CCTO 1704a Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: Audible detect signal (buzzer) to facilitates loop and / or detector troubleshooting. Ordering Number Logic: CCTO 1704a: Eberle Design Inc., Reno A&E, Part No. C-1200 or approved equivalent 1 Each 298.10$ 221.00$ 148 CCTO 1704b Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: TrueCount capability. Audible detect signal (buzzer) to facilitate loop and / or detector troubleshooting. Ordering Number Logic: CCTO 1704b: Eberle Design Inc., Reno A&E, Part No. C-1201 or approved equivalent 1 Each 517.00$ 323.00$ 149 CCTO 1720 Wide Dynamic Range Video Camera per the following and per State of Florida Approved Products List: Iteris RZ-4A WDR Video Camera Vehicle Detection Unit Ordering Number Logic: CCTO 1720: Iteris RZ-4A WDR (Advanced Wide Dynamic range) Color Video Detection Camera or approved equivalent 1 Each Does not meet specificatio ns 1,479.00$ 150 CCTO 1722 Combination Wide Dynamic Range Video Camera and Radar dilemma zone detection Camera per the following and per State of Florida Approved Products List: Iteris Vantage Vector Hybrid Video-Radar Camera Vehicle Detection Unit Ordering Number Logic: CCTO 1722: Iteris Vantage Vector Hybrid Color Video Detection Camera or approved equivalent 1 Each 4,298.00$ 151 CCTO 1723 Span Mounted Vantage SmartSpan Video Camera per the following and per State of Florida Approved Products List: Iteris Vantage SmartSpan Video Camera Vehicle Detection Unit Ordering Number Logic: CCTO 1723: Iteris Vantage SmartSpan Color Video Detection Camera or approved equivalent 1 Each 1,979.00$ 152 CCTO 1724 Video Vehicle Processor Unit per the following and per State of Florida Approved Products List: Iteris Vantage Edge 2 Video Processor: Ordering Number Logic: CCTO 1724: Iteris Vantage Edge 2, Dual Channel Video Processor or approved equivalent 1 Each Does not meet specificatio ns 3,385.00$ 153 CCTO 1726 Quad-view remote communications module per the following and per State of Florida Approved Products List: Iteris Vantage EdgeConnect Module: Ordering Number Logic: CCTO 1726: Iteris Vantage EdgeConnect Module or approved equivalent 1 Each 2,198.00$ 154 CCTO 1728 Integrated TS-2 Bus Interface Unit (BIU) module per the following and per State of Florida Approved Products List: Iteris Vantage EDGE2-SDLC-IM (TS2 Interface Module): Ordering Number Logic: CCTO 1728: Iteris Vantage EDGE2-SDLC-IM or approved equivalent 1 Each 1,000.00$ 155 CCTO 1732a Surge Suppression Panel per the following and per State of Florida Approved Products List: Iteris Din Rail Mounted Suppression Panel Ordering Number Logic: CCTO 1732a: Iteris Din Rail Mounted Suppression Panel for two video detection camera application or approved equivalent 1 Each Does not meet specificatio ns 279.00$ 156 CCTO 1732b Surge Suppression Panel per the following and per State of Florida Approved Products List: Iteris Din Rail Mounted Suppression Panel Ordering Number Logic: CCTO 1732b: Iteris Din Rail Mounted Suppression Panel for four video detection camera application or approved equivalent 1 Each Does not meet specificatio ns 279.00$ 157 CCTO 1732c Surge Suppression Panel per the following and per State of Florida Approved Products List: Iteris Din Rail Mounted Suppression Panel Six (6) Surge Panel for six video camera application Ordering Number Logic: CCTO 1732c: Iteris Din Rail Mounted Suppression Panel for six video detection camera application or approved equivalent 1 Each Does not meet specificatio ns 279.00$ 158 CCTO 1734 Video Camera Detection Cable per the following: Composite Coaxial RG-59/U / 16 AWG Power Cable Length: 1000 ft. spool Ordering Number Logic: CCTO 1734: Multicom Inc. Part Number: M-CC-59PETC-98/2-16/3-PE-A or approved equivalent 1 Each Does not meet specificatio ns 1,140.00$ 159 CCTO 1736 LCD CCTV Color Video Detection Monitor per the following: Diagonal Size: 7 inch Ordering Number Logic: CCTO 1736: Lilliput 7” LCD CCTV Video Monitor Part Number: 319GL-70NP or approved equivalent 1 Each 185.00$ 172.00$ 160 CCTO 1740 BNC Connector for Iteris Video Detection per the following: Ordering Number Logic: CCTO 1740: Amphenol 31-71032 or approved Equivalent 1 Each 3.00$ 9.44$ 161 CCTO 1730a Video Detection Mast Arm Mounting Bracket per the following and per State of Florida Approved Products List: Iteris Video Detection Camera Mount Camera Bracket: 1 Piece Tube Length: 74 inches Cable Length: 84 inches Paint No Color Ordering Number Logic: CCTO 1730a: Pelco Products Inc., Part Number: SP-1106-FL-1PC-74-84-PNC or approved equivalent 1 Each 180.06$ 185.00$ 162 CCTO 1730b Video Detection Mast Arm Mounting Bracket per the following and per State of Florida Approved Products List: Iteris Video Detection Camera Mount Camera Bracket: 2 Piece Tube Length: 74 inches Cable Length: 84 inches Paint No Color Ordering Number Logic: CCTO 1730b: Pelco Products Inc., Part Number: SP-1106-FL-2PC-74-84-PNC or approved equivalent 1 Each 185.53$ 191.00$ 163 CCTO 1731 Video Detection Mast Arm Mounting Bracket per the following and per State of Florida Approved Products List: Iteris Video Detection Camera Mount Cable Length: 84 inches Paint No Color Ordering Number Logic: CCTO 1731: Pelco Products Inc., Part Number: SP-1114-FL-84-PNC or approved equivalent 1 Each 447.29$ 352.00$ 164 CCTO 1750 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix SmartSensor Advance Extrended Range Dilemma Zone Protection System Number of Approaches: 1 Ordering Number Logic: CCTO 1750: One approach Wavetronix SmartSensor Advance Extended Range Dilemma Zone Protection or approved equivalent 1 Each 4,929.46$ 165 CCTO 1779 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix SmartSensor Matrix Presence Detector Number of Approaches: 1 Ordering Number Logic: CCTO 1779 One approach Wavetronix SmartSensor Matrix, Model Number: SS225 or approved equivalent 1 Each 4,621.46$ 166 CCTO 1783a Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix Click 650 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors. Ordering Number Logic: CCTO 1783a: Click 650 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors approved equivalent 1 Each 3,016.94$ 167 CCTO 1783b Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix Click 656 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors. Ordering Number Logic: CCTO 1783b: Click 656 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors approved equivalent 1 Each 4,402.94$ 168 CCTO 1752a Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752a: 100 feet, 6 conductor cable with connector or approved equivalent 1 Each 350.54$ 169 CCTO 1752b Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752b: 150 feet, 6 conductor cable with connector or approved equivalent 1 Each 542.11$ 170 CCTO 1752c Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752c: 200 feet, 6 conductor cable with connector or approved equivalent 1 Each 659.26$ Additional equivalents can be placed on a separate sheet of paper.7 of 20 16.A.21.a Packet Pg. 785 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 171 CCTO 1752d Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752d: 250 feet, 6 conductor cable with connector or approved equivalent 1 Each 776.41$ 172 CCTO 1752e Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752e: 300 feet, 6 conductor cable with connector or approved equivalent 1 Each 893.56$ 173 CCTO 1752f Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752f: 350 feet, 6 conductor cable with connector or approved equivalent 1 Each 1,010.71$ 174 CCTO 1752g Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752g: 400 feet, 6 conductor cable with connector or approved equivalent 1 Each 1,127.86$ 175 CCTO 1752h Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752h: 450 feet, 6 conductor cable with connector or approved equivalent 1 Each 1,245.01$ 176 CCTO 1752i Vehicle Detection Systems per the following and per State of Florida Approved Products List: Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1752i: 500 feet, 6 conductor cable with connector or approved equivalent 1 Each 1,362.16$ 177 CCTO 1756 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix Sensor Cable Junction Box Ordering Number Logic: CCTO 1756: Wavetronix Sensor Cable Junction Box, Part Number: SS-710 or approved equivalent 1 Each 171.60$ 178 CCTO 1780 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Microwave Vehicle Count Stations Wavetronix SmartSensor HD, 24 Ghz, Dual Radar, Model: 101-0415 Ordering Number Logic: CCTO 1780: Wavetronix LLC, SmartSensor HD Basic Assembly, 24 Ghz Dual Radar Model 101-0415 or approved equivalent. 1 Each 5,777.20$ 179 CCTO 1781 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Microwave Vehicle Count Stations Wavetronix SmartSensor HD Retrofit, 24 Ghz, Dual Radar Model: 101-0416 Ordering Number Logic: CCTO 1781: Wavetronix LLC, SmartSensor HD Basic Assembly, 24 Ghz Dual Radar Model 101-0416 or approved equivalent. 1 Each 6,007.46$ 180 CCTO 1784 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix Click! 301 Serial to Ethernet Converter: Ordering Number Logic: CCTO 1784: Wavetronix LLC, Model Click! 301 or approved equivalent. 1 Each 533.86$ 181 CCTO 1786 Vehicle Detection Systems per the following and per State of Florida Approved Products List: Wavetronix Click! 201 AC to DC Power Converter: Ordering Number Logic: CCTO 1786: Wavetronix LLC, Model Click! 201 or approved equivalent. 1 Each 154.00$ 182 CCTO 1754 Vehicle Detection Systems per the following and per State of Florida Approved Products List: 6 conductor cable for Wavetronix SmartSensor Advance Extended Range or SmartSensor Matrix Presence Detector. Ordering Number Logic: CCTO 1754: 1000 feet, 6 conductor cable, Part Number: SS-705-001 or approved equivalent 1 Each 1,801.06$ 183 CCTO 1758 Battery, Traffic Signal per the following and per State of Florida Approved Products List: Voltage: 12 Volt DC Ordering Number Logic: CCTO 1758: East Penn Manufacturing Co., Deka Dominator, Group 31, Part Number: 8G31 or approved equivalent 1 Each 184 CCTO 1770a Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770a: Sensys Networks, Inc., Mag 2 Flush Mounted Vehicle Sensor-System, Part Number: VSN-240-F, or approved equivalent 1 Each 460.00$ 185 CCTO 1770b Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770b: Sensys Networks, Inc., Serial Port Protocol (Digital Radio), Part Number: APCC-SPP or approved equivalent 1 Each 559.00$ 186 CCTO 1770c Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770c: Sensys Networks, Inc., Extension Card, Part Number: EX240 or approved equivalent 1 Each 350.00$ 187 CCTO 1770d Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770d: Sensys Networks, Inc., Part Number: Flex Long Life Repeater or approved equivalent 1 Each 1,209.00$ 188 CCTO 1770e Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770e: Sensys Networks, Inc., Battery Operated Repeater-Long Life, Part Number: RP240-BH-LL or approved equivalent 1 Each 1,209.00$ 189 CCTO 1770f Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770f: Sensys Networks, Inc., Mounting Kit for AP's and Repeaters, Part Number: KIT MTG or approved equivalent 1 Each 146.00$ 190 CCTO 1770g Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770g: Sensys Networks, Inc., Epoxy Tube, Part Number: Fabrick M-pp-450, MSM-750 VSN-240CS or approved equivalent 1 Each 61.00$ 191 CCTO 1770h Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770h: Sensys Networks, Inc., Part Number: VSN-240-CS or approved equivalent 1 Each 12.50$ 192 CCTO 1770i Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770i: Sensys Networks, Inc., Part Number: RAM 9" Extension bars-RaM-201-D or approved equivalent 1 Each 60.00$ 193 CCTO 1770j Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770j: Sensys Networks, Inc., Controller Card with Enhanced Ethernet, Part Number: APCC-M-E or approved equivalent 1 Each 2,821.00$ 194 CCTO 1770k Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770k: Sensys Networks, Inc., Accessory, Isolator, Part Number: APCC-ACC-1 or approved equivalent 1 Each 304.00$ 195 CCTO 1770l Vehicle Detection Systems per the following and per State of Florida Approved Products List: Sensys Networks, Inc. Wireless Detection system Ordering Number Logic: CCTO 1770l: Sensys Networks, Inc., standard external antenna, Part Number: FLEX-ANT-1 or approved equivalent 1 Each 177.00$ 196 CCTO 2010 Controller, Traffic NEMA TS2, Type 2 per the following and per State of Florida Approved Products List: Intelight X3 NEMA TS2, Type 2 Ordering Number Logic: CCTO 2010: Intelight X3 or approved equivalent 1 Each 1,905.00$ Does not meet specifications 197 CCTO 2011 Controller, Traffic NEMA TS2, Type 2 per the following and per State of Florida Approved Products List: Intelight X3 NEMA TS2, Type 2 with MaxAdapt. MaxAdapt local controller software. Ordering Number Logic: CCTO 2011: Intelight X3 with MaxAdapt or approved equivalent 1 Each 7,405.00$ 198 CCTO 2102 Cabinet, Traffic Signal Controller Assembly per the following and per State of Florida Approved Products List: NEMA Standard TS2 Type 1 Cabinet assembly shall be Type 6 Ordering Number Logic: CCTO 2102: Transportation Control Systems Inc., TS2-Type 1 Collier County or approved equivalent 1 Each 11,765.00$ 8,940.00$ 10,702.00$ 11,340.00$ 199 CCTO 2105 Cabinet, Traffic Signal Controller Assembly Power Connector Adapter Cable from TS2, Type 1 to TS2, Type 2 Traffic Controller. Ordering Number Logic: CCTO 2105: Temple, Inc Part Number: ABW12027P001 or approved Equivalent 1 Each 112.00$ 200 CCTO 2206 Cabinet Power Supply, TS-2 per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2206: Eberle Design Inc., Part No. EDI PS-250 or approved equivalent 1 Each 375.00$ 450.90$ Additional equivalents can be placed on a separate sheet of paper.8 of 20 16.A.21.a Packet Pg. 786 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 201 CCTO 2222 Malfunction Management Unit (MMU2) per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2222: Eberle Design Inc., MMU2-16LEip or approved equivalent 1 Each 665.50$ Does not meet specifications Does not meet specifications 202 CCTO 2223 SmartMonitor Program Card, Malfunction Management Unit (MMU2) per the following and per State of Florida Approved Products List: Compatible with MMU2-16LE(ip)s Ordering Number Logic: CCTO 2223: Eberle Design Inc., MMU2-16LE(ip) SmartMonitor Program Card or approved equivalent 1 Each 50.00$ 78.10$ 203 CCTO 2224 NEMA Load Switch per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2224: Power Distribution & Control, Inc., Part No. SSS-86-3 or approved equivalent 1 Each 25.00$ 32.00$ 33.00$ 21.56$ 24.00$ 204 CCTO 2225 NEMA Load Switch per the following and per State of Florida Approved Products List: Input and Output LED Indicators Ordering Number Logic: CCTO 2225: Power Distribution & Control, Inc., Part No. SSS-86I/O or approved equivalent 1 Each 28.00$ 37.00$ 28.33$ 24.00$ 205 CCTO 2226 NEMA Flasher per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2226: Power Distribution & Control, Inc., Part No. SSF-86-3 or approved equivalent 1 Each 25.00$ 27.00$ 21.56$ 24.00$ 206 CCTO 2228 Bus Interface Unit (BIU) per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2228: Eberle Design Inc., Model: BIU-700 or approved equivalent 1 Each 225.00$ 209.73$ 189.00$ 207 CCTO 2110 4 11/16 inch Square Axial Fan per the following: Fan Voltage: 115 VAC Ordering Number Logic: CCTO 2110: Dayton Part Number 2RTK6 or approved equivalent 1 Each 208 CCTO #2112 Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: Voltage Clamp: 30 volts Ordering Number Logic: CCTO #2112: Asco Power Technologies, Surge Protector, Model: 175D030S10KLPCN0 (Edco PC642C-030) or approved equivalent 1 Each 29.00$ 33.00$ 209 CCTO #2112a Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO #2112a: Asco Power Technologies, Base, Model: PCB1B (Edco PCB1B-WKEY) or approved equivalent 1 Each 11.75$ 13.00$ 210 CCTO #2113a 10 Circuit SDLC Hub per the following and per State of Florida Approved Products List: Number of SDLC communication ports: 10 Ordering Number Logic: CCTO #2113a: Transportation Control Systems Inc., TS2 Traffic Signal Cabinet, 10 circuit, SDLC Hub or approved equivalent 1 Each 196.00$ 271.00$ 211 CCTO 2302 Flash Transfer Relay per the following and per State of Florida Approved Products List: Pole Configuration: DPDT Coil Input Voltage: 110/120 VAC 50/60 Hz Contact Load Rating: 20 Amps at 120 VAC Ordering Number Logic: CCTO 2302: Deltrol Controls, Model: 295 or approved equivalent 1 Each 28.00$ 22.94$ 212 CCTO 2119a Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: Voltage Clamp: 15 volts Ordering Number Logic: CCTO 2119a: Asco Power Technologies, Surge Protector, Model: 175D015S10KLPCN0 (Edco PC642C-015) or approved equivalent 1 Each 37.22$ 33.00$ 213 CCTO 2119b Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2119b: Asco Power Technologies, Base, Model: PCB1B (Edco PCB1B-WKEY) or approved equivalent 1 Each 11.75$ 13.00$ 214 CCTO 2115 Transient Protection Device, Traffic Cabinet Coax Surge per the following and per State of Florida Approved Products List: Clamp Voltage ………………..…….….6 VDC Ordering Number Logic: CCTO 2115: Asco Power Technologies, Model: 160D006S20KXCXN0 (Edco CX06-M) or approved equivalent 1 Each 34.83$ 34.00$ 215 CCTO #2116 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO #2116: Asco Power Technologies, Model: 254 (Edco ACP-340) or approved equivalent 1 Each 71.41$ 72.00$ 216 CCTO 2117 Transient Protection Device, Traffic Cabinet Loop Surge per the following and per State of Florida Approved Products List: Configuration: 3 Spaded Terminal Block Terminal Spacing: 9/16” Ordering Number Logic: CCTO 2117: Asco Power Technologies, Model: 140D130S250ST9N0 (Edco SRA6LCA916) or approved equivalent 1 Each 9.90$ 9.00$ 217 CCTO 2120 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2120: Asco Power Technologies, Model: 251120NF010AN6N0 (Edco SHP300-10) or approved equivalent 1 Each 41.47$ 45.00$ 218 CCTO 2121 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2121: Asco Power Technologies, Model: 233120NS20KAN2N0 (Edco SPA-100T) or approved equivalent 1 Each 17.92$ 20.00$ 219 CCTO 2118 Filter, Traffic Cabinet AC Power Line per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2118: Asco Power Technologies, Model: 250120NF060AN3N0 (Edco INXT120NL000-1) or approved equivalent 1 Each 32.79$ 36.00$ 220 CCTO 2202 NEMA TS2 Type-1 Load Bay circuit L-board per the following and per State of Florida Approved Products List: Manufacturer: Eagle Ordering Number Logic: CCTO 2202: Mobotrex, Part Number: ACP11957P001 or approved equivalent 1 Each 140.00$ 221 CCTO 2208 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: Housing and Circuitry for one (1) BIU and 8 Two Channel Detector Cards Ordering Number Logic: CCTO 2208: Mobotrex, Part Number: CDR100 or approved equivalent 1 Each 340.00$ 222 CCTO 2210 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: Housing and Circuitry for one (1) BIU and 4 Two Channel Detector Cards. Ordering Number Logic: CCTO 2210: Mobotrex, Part Number: CDR101 or approved equivalent 1 Each 270.00$ 223 CCTO 2212 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: Housing and Circuitry for one (1) BIU, 8 Two Channel Detector Cards, and one (1) GTT Opticom Phase Selector Card. Ordering Number Logic: CCTO 2212: Mobotrex, Part Number: AAD12047P001 or approved equivalent 1 Each 269.00$ 224 CCTO 2111 Inductive Loop Panel, TS2, Cabinet Detector per the following and per State of Florida Approved Products List: PCB for 16 channels (1-16) of inductive loop detection. PCB for 4 channels of GTT Infrared Opticom Detection. Ordering Number Logic: CCTO 2111: Mobotrex, Part Number: ACP14829P002 or approved equivalent 1 Each 234.00$ 225 CCTO 2111a Inductive Loop Panel, TS2, Cabinet Detector per the following and per State of Florida Approved Products List: PCB for 16 channels (17-32) of inductive loop detection. Ordering Number Logic: CCTO 2111a: Mobotrex, Part Number: ACP14829P001 or approved equivalent 1 Each 187.00$ 226 CCTO 2201a NEMA TS2 Type-1 Load Bay circuit board per the following and per State of Florida Approved Products List: Manufacturer: Transportation Control Systems Inc. Printed Circuit Board (PCB) for Traffic Signal Cabinet Loadbay BIU 1. Ordering Number Logic: CCTO 2201a: Transportation Control Systems Inc., PCB for Loadbay BIU 1, or approved equivalent 1 Each 110.00$ 227 CCTO 2201b NEMA TS2 Type-1 Load Bay circuit board per the following and per State of Florida Approved Products List: Manufacturer: Transportation Control Systems Inc. Printed Circuit Board (PCB) for Traffic Signal Cabinet Loadbay BIU 2. Ordering Number Logic: CCTO 2201b: Transportation Control Systems Inc., PCB for Loadbay BIU 2, or approved equivalent 1 Each 110.00$ 228 CCTO 2200a Preemption Systems, Preemption/Priority System per the following and per State of Florida Approved Products List: Glance AI-500-085 Series Field Monitoring System. Includes 5 year cellular communications plan. Ordering Number Logic: CCTO 2200a: Temple Inc., Applied Information Inc., Glance Field Monitoring System with 5 year Cellular Plan, Part Number: AI-500-085 Series or approved equivalent 1 Each 5,339.00$ 229 CCTO 2200b Preemption Systems, Preemption/Priority System per the following and per State of Florida Approved Products List: Glance AI-500-085 Series Field Monitoring System. No 5 year cellular communications plan. Ordering Number Logic: CCTO 2200b: Temple Inc., Applied Information Inc., Glance Field Monitoring System with No 5 year Cellular Plan, Part Number: AI-500-085 Series or approved equivalent 1 Each 3,296.00$ Additional equivalents can be placed on a separate sheet of paper.9 of 20 16.A.21.a Packet Pg. 787 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 230 CCTO 2360 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync Fusion NEMA Processor Ordering Number Logic: CCTO 2360: Rhythm Engineering, InSync Fusion NEMA Style Processor, Model 800-00017 or approved equivalent 1 Each 4,630.00$ 231 CCTO 2362 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync Fusion Detection Camera Samsung SNZ-5200 digital IP camera with lens Moog Enclosure Ordering Number Logic: CCTO 2362: Rhythm Engineering, InSync Samsung SNZ-5200 with Moog Enclosure Detection Camera, Model 1520098645 00017 or approved equivalent 1 Each 2,220.00$ 232 CCTO 2364 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync Equipment Panel 8 Ethernet networking ports Ordering Number Logic: CCTO 2364: Rhythm Engineering, InSync Equipment Panel or approved equivalent 1 Each 920.00$ 233 CCTO 2366 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync SDLC Interface Module Compatible with the NEMA TS2-Type 1 traffic controller Ordering Number Logic: CCTO 2366: Rhythm Engineering, InSync SDLC Interface Module, Model 1116VL00144 or approved equivalent 1 Each 695.00$ 234 CCTO 2368 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync Intercept Module Provides for eight field inputs and eight field outputs Ordering Number Logic: CCTO 2368: Rhythm Engineering, InSync Intercept Module or approved equivalent 1 Each 670.00$ 235 CCTO 2370 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: InSync Digital Loggers, Inc. DIN Relay: Ordering Number Logic: CCTO 2370: Rhythm Engineering, InSync, Digital Loggers, Inc. DIN Relay III, Model LNX-800A-T or approved equivalent 1 Each 299.00$ 236 CCTO 2372 Adaptive Signal Control System, Adaptive Traffic Control System, per the following and per State of Florida Approved Products List: a. OVP RJ45 Surge Protector: b. Ordering Number Logic: CCTO 2372: OVP network power supply combined lightning protection device surveillance cameras power surge RJ45 E100/4-C, Model OVP-RJ45-E100/4-C or approved equivalent 1 Each 38.00$ 237 CCTO 2374 Camera Ethernet Extender components per the following and per State of Florida Approved Products List: Non-POE (power over ethernet) network extender for CAT 5e or Cat6 Ordering Number Logic: CCTO 2374: Veracity USA, Inc., Outreach Lite XT, Part Number: VOR-ORL-XT or approved equivalent 1 Each 325.00$ 238 CCTO 2376 Camera Ethernet Extender components per the following and per State of Florida Approved Products List: POE (Power over Ethernet) Network injector for CAT 5e or Cat6 Ordering Number Logic: CCTO 2376: Veracity USA, Inc., Outsource, Part Number: VOR-OSP or approved equivalent 1 Each 120.00$ Does not meet specifications 239 CCTO 1706 Preemption Systems, Multimode Phase Selector per the following and per State of Florida Approved Products List: Four dual-priority and probe frequency channels. Ordering Number Logic: CCTO 1706: Global Traffic Technologies Opticom Model 764 GPS& IR Phase Selector or approved equivalent 1 Each 2,805.00$ 240 CCTO 1708a Preemption Systems, Infrared Detector per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1708a: CCTO 1708a Global Traffic Technologies Opticom Model 711 Single Channel, Infrared Detector or approved equivalent 1 Each 456.00$ 241 CCTO 1708b Preemption Systems, Infrared Detector per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1708b: Global Traffic Technologies Opticom Model 721 Single Channel, Dual Detection, Infrared Detector or approved equivalent 1 Each 509.00$ 242 CCTO 1708c Preemption Systems, Infrared Detector per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 1708c: Global Traffic Technologies Opticom Model 722 Two Direction, Two Output Detection, Infrared Detector or approved equivalent 1 Each 705.00$ 243 CCTO 1710 Preemption Systems, Opticom Model 138 Detector Cable per the following and per State of Florida Approved Products List: Three color-coded conductors, a conductive shield and drain, and a black PVC jacket. Length: 1000 ft. Spool. Ordering Number Logic: CCTO 1710: Global Traffic Technologies Opticom Model 138 Detector Cable or approved equivalent 1 Each 525.00$ 244 CCTO 1711a Cast Device Box per the following: Material: Malleable Iron Ordering Number Logic: CCTO 1711a: Cast Device Box, Appleton (O-Z/Gedney) Catalog Number: FSX-1-75 or approved Equivalent 1 Each 245 CCTO 1711b Cast Device Box per the following: Material: Malleable Iron Ordering Number Logic: CCTO 1711b: Cast Box Cover with Gasket, Appleton (O-Z/Gedney) Catalog Number: FSK-1B or approved Equivalent 1 Each 246 CCTO 1712a Cast Device Box, Cover, and Gasket per the following: Material: Cast Aluminum Ordering Number Logic: CCTO 1712a: Ordering Number Logic: Cast Device Box, Hubbell Inc., Killark Electric, Catalog Number: FSX-2SU6 or approved Equivalent 1 Each 247 CCTO 1712b Cast Device Box, Cover, and Gasket per the following: Material: Cast Aluminum Ordering Number Logic: CCTO 1712b: Ordering Number Logic: Cast Box Cover with Gasket, Hubbell Inc., Killark Electric, Catalog Number: FSBC or approved Equivalent 1 Each 248 CCTO 1714 Hooded Lamp holder per the following: Material: One-piece lamp holder and hood of heavy-duty die-cast aluminum Bulb Type: PAR-38 Ordering Number Logic: CCTO 1714: Mulberry Metal Products Inc. Catalog Number: 30060 or approved Equivalent 1 Each 249 CCTO 1716 PAR 38 LED Flood lamp per the following: Type: Non-dimmable LED Incandescent Wattage Comparison: 90 Beam Angle: 40 degrees Ordering Number Logic: CCTO 1716: Satco, Part No. S9457 or approved equivalen 1 Each 250 CCTO 1718a Mini-Bracket, 3/4”-14 NPT Stainless Cable Mount, Aluminum per the following and per State of Florida Approved Products List: Cable Length: 45 inches Paint: No Color Ordering Number Logic: CCTO 1718a: Pelco Products Inc., Part Number: SP-1113-FL-45-PNC or approved equivalent 1 Each 48.35$ 45.00$ 251 CCTO 1718b Mini-Bracket, 3/4”-14 NPT Stainless Cable Mount, Aluminum per the following and per State of Florida Approved Products List: Cable Length: 62 inches Paint: No Color Ordering Number Logic: CCTO 1718b: Pelco Products Inc., Part Number: SP-1113-FL-62-PNC or approved equivalent 1 Each 50.82$ 48.00$ 252 CCTO 1718c Mini-Bracket, 3/4”-14 NPT Stainless Cable Mount, Aluminum per the following and per State of Florida Approved Products List: Cable Length: 84 inches Paint: No Color Ordering Number Logic: CCTO 1718c: Pelco Products Inc., Part Number: SP-1113-FL-84-PNC or approved equivalent 1 Each 53.47$ 51.00$ 253 CCTO 2923 Disconnect Hub Assembly per the following: Color: Flat Black Type: 1-1/2” NPS Ordering Number Logic: CCTO 2923: Pelco Products Inc., Part Number: SE-0378-P34 or approved equivalent 1 Each 11.15$ 10.00$ 254 CCTO 2927 Reducer Bushing, 1-1/2” NPT x 3/4” NPT, Galvanized Iron per the following: Material: Galvanized Iron. Ordering Number Logic: CCTO 2927: Pelco Products Inc., Part Number: SE-0471-GLV or approved equivalent 1 Each 4.81$ 5.00$ 255 CCTO 1709 Preemption Confirmation Light Relay Interface Panel per the Collier County Signalization Technical Special Provisions, TSP-30, the following: Number of Circuits: 4 Relay Type: Omron DPDT, Model Number: LY2-DC24 or approved equivalent. Relay Coil input Diode 1N4004 Ordering Number Logic: CCTO 1709: Transportation Control Systems, Preemption Confirmation Light Relay Interface Panel or approved equivalent 1 Each 172.00$ 256 CCTO 1514 School Zone Flasher, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Number of Beacons: Single Beacon Color: Yellow CCTO 1514: Carmanah Technologies Corp., Model: R829G with single beacon or approved equivalent 1 Each 3,187.00$ Additional equivalents can be placed on a separate sheet of paper.10 of 20 16.A.21.a Packet Pg. 788 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 257 CCTO 1516 School Zone Flasher, Solar Powered, Dual Beacon per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Number of Beacons: Dual Beacon Color: Yellow Ordering Number Logic: CCTO 1516: Carmanah Technologies Corp., Model: R829G with dual vertical beacons or approved equivalent 1 Each 3,815.00$ 258 CCTO 1514a School Zone Flasher, 120 VAC Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Number of Beacons: Single Beacon Color: Yellow Ordering Number Logic: CCTO 1514a: Carmanah Technologies Corp., Model: R829G with single beacon or approved equivalent 1 Each 2,535.00$ 259 CCTO 1516a School Zone Flasher, 120 VAC Powered, Dual Beacon per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Number of Beacons: Dual Beacon Color: Yellow Ordering Number Logic: CCTO 1516a: Carmanah Technologies Corp., Model: R829G with dual vertical beacons or approved equivalent 1 Each 3,164.00$ 260 CCTO 1519a Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Single 12 in (305 mm) diameter yellow LED beacon. Beacon Mounting: 4.0"- 4.5" Diameter Round Pole Mount Ordering Number Logic: CCTO 1519a: Carmanah Technologies Corp., Model: R247-E with Yellow beacon or approved equivalent 1 Each 2,124.00$ 261 CCTO 1519b Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Single 12 in (305 mm) diameter red LED beacon Beacon Mounting: 4.0"- 4.5" Diameter Round Pole Mount Ordering Number Logic: CCTO 1519b: Carmanah Technologies Corp., Model: R247-E with Red beacon or approved equivalent 1 Each 2,124.00$ 262 CCTO 1520a Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Single 12 in (305 mm) diameter yellow LED beacon. Beacon Mounting: 2.0"-2.5" Perforated Square Pole Mount Ordering Number Logic: CCTO 1520a: Carmanah Technologies Corp., Model: R247-E with Yellow beacon or approved equivalent 1 Each 2,114.00$ 263 CCTO 1520b Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Single 12 in (305 mm) diameter red LED beacon. Beacon Mounting: 2.0"-2.5" Perforated Square Pole Mount Ordering Number Logic: CCTO 1520b: Carmanah Technologies Corp., Model: R247-E with Red beacon or approved equivalent 1 Each 2,114.00$ 264 CCTO 1522a Flashing Beacon, Solar Powered, Dual Beacons per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Dialight, 12 VDC, 12 inch, Yellow LED beacons. Number of Beacons: Two Ordering Number Logic: CCTO 1522a: Carmanah Technologies Corp., Model: R247-G with dual Yellow beacons or approved equivalent 1 Each 3,723.00$ 265 CCTO 1522b Flashing Beacon, Solar Powered, Dual Beacons per the following and per State of Florida Approved Products List: Operation: 24-7 Flashing Power Source: Solar/Battery Type of Beacon: Dialight, 12 VDC, 12 inch, red LED beacons. Number of Beacons: Two Ordering Number Logic: CCTO 1522b: Carmanah Technologies Corp., Model: R247-G with Red beacons or approved equivalent 1 Each 3,723.00$ 266 CCTO 2203 RTC Cellular Programmable AP22 Time Switch System per the following and per State of Florida Approved Products List: AP22 Two-output time switch with CPC connector and 48" wiring harness Ordering Number Logic: CCTO 2203: RTC Manufacturing, Inc., Part Number 503644 or approved equivalent 1 Each 267 CCTO 2203a RTC Cellular Programmable AP22 Time Switch System per the following and per State of Florida Approved Products List: Program Transfer cable for AP22 Time Switch. Ordering Number Logic: CCTO 2203a: RTC Manufacturing, Inc., Program transfer cable, Part Number 504558 or approved equivalent 1 Each 25.00$ 268 CCTO 2203b RTC Cellular Programmable AP22 Time Switch System per the following and per State of Florida Approved Products List: AC power cable with connector Ordering Number Logic: CCTO 2203b: RTC Manufacturing, Inc., AC power cable with connector, Part Number 500517 or approved equivalent 1 Each 45.00$ 269 CCTO 2207 RTC M2M Cellular Communications Modem per the following and per State of Florida Approved Products List: a. Communicates with School Zone Flashers Using SMS Texting b. Does not include SIM card. c. Includes external antenna. Ordering Number Logic: RTC Manufacturing, Inc., Part Number TSC2G or approved equivalent 1 Each 769.00$ 270 CCTO 2205a Cellular Programmable Temple Inc. FCU-500-071 Time Switch System per the following and per State of Florida Approved Products List: Includes 5 year Cellular connectivity plan Ordering Number Logic: CCTO 2205a: Includes 5 year Cellular connectivity plan. Temple Inc., Part Number FCU-500-071 or approved equivalent 1 Each 2,355.00$ 271 CCTO 2205b Cellular Programmable Temple Inc. FCU-500-071 Time Switch System per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2205b: No 5 year Cellular connectivity plan. Temple Inc., Part Number FCU-500-071 or approved equivalent 1 Each 1,334.00$ 272 CCTO 2106a Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Mounting option for flat surface. Ordering Number Logic: CCTO 2106a: Temple Inc., Part Number: TF4001F-FL-DC with Mounting option for flat surface or approved equivalent 1 Each 2,420.00$ 273 CCTO 2106b Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Mounting option for round surface. Ordering Number Logic: CCTO 2106b: Temple Inc., Part Number: TF4001F-FL-DC with Mounting option for round surface or approved equivalent 1 Each 2,382.00$ 274 CCTO 2101a Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Equipped with FDOT APL approved Model 204 Flasher Module Mounting option for flat surface Ordering Number Logic: CCTO 2101a: Temple Inc., Part Number: TF4001F-FL with Mounting option for flat surface, or approved equivalent. 1 Each 1,028.00$ 275 CCTO 2101b Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Equipped with FDOT APL approved Model 204 Flasher Module Mounting option for round surface. Ordering Number Logic: CCTO 2101b: Temple Inc., Part Number: TF4001F-FL with Mounting option for round surface, or approved equivalent. 1 Each 989.00$ 276 CCTO 2100a Type 1 Unwired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Mounting option for flat surface. Ordering Number Logic: CCTO 2100a: Temple Inc., Part Number: SMTF161412TSD with Mounting option for flat surface, or approved equivalent 1 Each 687.00$ 277 CCTO 2100b Type 1 Unwired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: Mounting option for round surface. Ordering Number Logic: CCTO 2100b: Temple Inc., Part Number: SMTF161412TSD with Mounting option for round surface, or approved equivalent 1 Each 648.00$ Additional equivalents can be placed on a separate sheet of paper.11 of 20 16.A.21.a Packet Pg. 789 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 278 CCTO 3160a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Display Message LED digits: 15 inches. Includes one Dialight 12 inch yellow LED beacon (MUTCD Compliant). Ordering Number Logic: CCTO 3160a: Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-S-B1 or approved equivalent 1 Each 6,214.00$ 279 CCTO 3160b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Display Message LED digits: 15 inches. Includes two Dialight 12 inch yellow LED beacons (MUTCD Compliant). Ordering Number Logic: CCTO 3160b: Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-S-B2 or approved equivalent 1 Each 6,912.00$ 280 CCTO 3162a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Display Message LED digits: 15 inches Includes one Dialight 12 inch yellow LED beacon (MUTCD Compliant). Ordering Number Logic: CCTO 3162a: Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-AC-B1 or approved equivalent 1 Each 5,828.00$ 281 CCTO 3162b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Display Message LED digits: 15 inches Includes two Dialight 12 inch yellow LED beacons (MUTCD Compliant). Ordering Number Logic: CCTO 3162b: Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-AC-B2 or approved equivalent 1 Each 6,525.00$ 282 CCTO 3164a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Display Message LED digits: 18 inches. Includes one Dialight 12 inch yellow LED beacon (MUTCD Compliant). Ordering Number Logic: CCTO 3164a: Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-S-B1 or approved equivalent 1 Each 6,874.00$ 283 CCTO 3164b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: Solar/Battery Display Message LED digits: 18 inches. Includes two Dialight 12 inch yellow LED beacons (MUTCD Compliant). Ordering Number Logic: CCTO 3164b: Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-S-B2 or approved equivalent 1 Each 7,572.00$ 284 CCTO 3166a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Display Message LED digits: 18 inches Includes one Dialight 12 inch yellow LED beacon (MUTCD Compliant). Ordering Number Logic: CCTO 3166a: Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-AC-B1 or approved equivalent 1 Each 6,588.00$ 285 CCTO 3166b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: School Zone Power Source: 120 VAC Display Message LED digits: 18 inches Includes two Dialight 12 inch yellow LED beacons (MUTCD Compliant). Ordering Number Logic: CCTO 3166b: Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-AC-B2 or approved equivalent 1 Each 7,285.00$ 286 CCTO 3168 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: Non-School Zone Power Source: Solar/Battery Display Message LED digits: 15 inches Ordering Number Logic: CCTO 3168: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-15-S or approved equivalent 1 Each 5,517.00$ 287 CCTO 3170 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: Non-School Zone Power Source: 120 VAC AC power kit external box. Display Message LED digits: 15 inches Ordering Number Logic: CCTO 3170: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-15-AC or approved equivalent 1 Each 5,828.00$ 288 CCTO 3072 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: Non-School Zone Power Source: Solar/Battery Display Message LED digits: 18 inches Ordering Number Logic: CCTO 3072: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-18-S or approved equivalent 1 Each 6,177.00$ 289 CCTO 3074 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Operation: Non-School Zone Power Source: 120 VAC AC power kit external box. Display Message LED digits: 18 inches Ordering Number Logic: CCTO 3074: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-18-AC or approved equivalent 1 Each 5,890.00$ 290 CCTO 3076 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: OutputManager™ for managing operation of 12V external devices. Includes Wiring Harness Compatible with: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series. Ordering Number Logic: CCTO 3076: Carmanah Technologies Corp., Information Display Company, Model Number: O-MGR or approved equivalent 1 Each 78.00$ 291 CCTO 3078a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Item: AC Power supply conversion kit. Function: Convert 120 volt AC to 12 volt DC. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series. Ordering Number Logic: CCTO 3078a: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series, Model Number: 85497 or approved equivalent 1 Each 525.00$ 292 CCTO 3078b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Item: AC Power supply conversion kit. Function: Convert 120 volt AC to 12 volt DC. Compatible with Carmanah Technologies Corp., Information Display Company, Speedcheck-18 Series. Ordering Number Logic: CCTO 3078b: Carmanah Technologies Corp., Information Display Company, SpeedCheck-18 Series, Model Number: 85412 or approved equivalent 1 Each 625.00$ 293 CCTO 3080 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Replacement Controller Board. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series Ordering Number Logic: CCTO 3080: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and SpeedCheck- 18 Series, Replacement Controller Board, Part Number: 85718 or approved equivalent. 1 Each 430.00$ 294 CCTO 3082 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Replacement Radar head. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series. Ordering Number Logic: CCTO 3082: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and SpeedCheck- 18 Series, Replacement Radar head, Part Number: H-R-AO or approved equivalent 1 Each 940.00$ Additional equivalents can be placed on a separate sheet of paper.12 of 20 16.A.21.a Packet Pg. 790 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 295 CCTO 3084a Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Replacement Right and Left legend Panel. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series. Ordering Number Logic: CCTO 3084a: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series, Model Number: Replacement Right and Left legend Panel, Part Number: 85458 or approved equivalent 1 Each 630.00$ 296 CCTO 3084b Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Replacement Right and Left legend Panel. Compatible with Carmanah Technologies Corp., Information Display Company, Speedcheck-18 Series. Ordering Number Logic: CCTO 3084b: Carmanah Technologies Corp., Information Display Company, SpeedCheck-18 Series, Model Number: Replacement Right and Left legend Panel, Part Number 85359 or approved equivalent 1 Each 750.00$ 297 CCTO 3086 Electronic Display Sign (EDS) – Portable Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 3086: Trafficalm Systems, Model M75-12DFB-P001 or approved equivalent 1 Each 298 CCTO 2440a Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Single Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Single Ordering Number Logic: CCTO 2440a: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 24X24, Single Message, or approved equivalent 1 Each 2,712.00$ 2,400.00$ 299 CCTO 2440b Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Single Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Single Ordering Number Logic: CCTO 2440b: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X30, Single Message, or approved equivalent 1 Each 2,899.00$ 2,650.00$ 300 CCTO 2440c Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Single Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Single Ordering Number Logic: CCTO 2440c: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X36, Single Message, or approved equivalent 1 Each 3,087.00$ 2,975.00$ 301 CCTO 2440d Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Single Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Single Ordering Number Logic: CCTO 2440d: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 36X36, Single Message, or approved equivalent 1 Each 3,899.00$ 3,250.00$ 302 CCTO 2442a Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Dual Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Dual Ordering Number Logic: CCTO 2442a: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 24X24, Dual Message, or approved equivalent 1 Each 3,337.00$ 2,650.00$ 303 CCTO 2442b Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Dual Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Dual Ordering Number Logic: CCTO 2442b: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X30, Dual Message, or approved equivalent 1 Each 3,524.00$ 2,900.00$ 304 CCTO 2442c Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Dual Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Dual Ordering Number Logic: CCTO 2442c: Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X36, Dual Message, or approved equivalent 1 Each 3,774.00$ 3,225.00$ 305 CCTO 2442d Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Dual Message, per the following and per State of Florida Approved Products List: Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. Message Type: Dual Ordering Number Logic: CCTO 2442d Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 36X36, Dual Message, or approved equivalent 1 Each 4,524.00$ 3,500.00$ 306 CCTO 1523a Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: Solar/Battery. Solar Panel: 30 W high-efficiency photovoltaic solar panel. Light Bar Configuration: Single. Ordering Number Logic: CCTO 1523a: Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: R920 or approved equivalent 1 Each 2,855.00$ 307 CCTO 1523b Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: Solar/Battery. Solar Panel: 30 W high-efficiency photovoltaic solar panel. Light Bar Configuration: Dual. Ordering Number Logic: CCTO 1523b: Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: R920 or approved equivalent 1 Each 3,435.00$ 308 CCTO 1525a Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: Solar/Battery. Solar Panel: 50 W high-efficiency photovoltaic solar panel. Battery system: 12 V, 75 Ahr. Light Bar Configuration: Single Ordering Number Logic: CCTO 1525a: Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: SC315-G or approved equivalent 1 Each 3,397.00$ 309 CCTO 1525b Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: Solar/Battery. Solar Panel: 50 W high-efficiency photovoltaic solar panel. Battery system: 12 V, 75 Ahr. Light Bar Configuration: Dual. CCTO 1525b: Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: SC315-G or approved equivalent 1 Each 3,977.00$ 310 CCTO 1527a Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: 120 VAC. Light Bar Configuration: Single. Ordering Number Logic: CCTO 1527a: Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: SC315-AC or approved equivalent 1 Each 2,525.00$ 311 CCTO 1527b Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: Power Source: 120 VAC. Light Bar Configuration: Dual. Ordering Number Logic: CCTO 1527b: Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: SC315-AC or approved equivalent 1 Each 3,349.00$ 312 CCTO 2230 Network Devices, per the following and per State of Florida Approved Products List: RuggedCom Inc. (ITS) Managed Switch RS900G: 10-port Managed Ethernet Switch Ordering Number Logic: CCTO 2230: RuggedCom Inc. a Siemens Company, Model RS900G-HI-D-2LC10 or approved equivalent. 1 Each 1,922.00$ 2,200.00$ 313 CCTO 2232 Network Devices, per the following and per State of Florida Approved Products List: Industrial 24-port rack –mounted Managed Hardened Layer 2 Ethernet switch ITS Express Inc., Model Number ITS- 8024: Ordering Number Logic: CCTO 2232: ITS Express Inc., Model ITS Express Inc., Model Number ITS- 8024 or approved equivalent. 1 Each Does not meet specifications 314 CCTO 2234 Network Devices, per the following and per State of Florida Approved Products List: Layer 2++ Multicast Cabinet Switch ITS Express Inc., Model Number ITS-8040: 12-port Managed Ethernet Switch (4) 100/1000 Hybrid SFP ports, Plus (8) copper 100/1000SFP/1000TX RJ45 Ordering Number Logic: CCTO 2234: ITS Express Inc., Model ITS Express Inc., Model Number ITS- 8040 or approved equivalent. 1 Each 1,099.99$ Does not meet specifications 315 CCTO 2236 Network Devices, per the following and per State of Florida Approved Products List: ITS Express Inc., Model number ITS-HPS Power Supply. Ordering Number Logic: CCTO 2236: ITS Express Inc., Model Number ITS-HPS power supply with 6 foot cable or approved equivalent. 1 Each 79.99$ Does not meet specifications Additional equivalents can be placed on a separate sheet of paper.13 of 20 16.A.21.a Packet Pg. 791 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 316 CCTO 2238 Network Devices, per the following and per State of Florida Approved Products List: ITS Express Inc., Model Number ITS-8028: 28-port Managed Ethernet Switch, (4) 100/1000 SFP ports, Plus (24) Combo 100/1000SFP/1000TX RJ45 Ordering Number Logic: CCTO 2238: ITS Express Inc., ITS Express Inc., Model Number ITS- 8028 or approved equivalent. 1 Each Does not meet specifications 317 CCTO 2240 Network Devices, per the following and per State of Florida Approved Products List: Combination 24-port Hardened Layer 2 Ethernet Switch with Optical Bypass ITS Express Inc., Model Number ITS- 8012+: Ordering Number Logic: CCTO 2240: ITS Express Inc., Model ITS-8012+ or approved equivalent. 1 Each 1,699.99$ Does not meet specifications 318 CCTO 2242 Network Devices, per the following and per State of Florida Approved Products List: Hardened Optical Bypass Switch ITS Express Inc., Model Number ITS-80BP Support 100m/1G/10G optical Bypass Function of 2 port duplex or 4 port simplex fiber connections Ordering Number Logic: CCTO 2242: ITS Express Inc., Model Number ITS-80BP or approved equivalent. 1 Each 319 CCTO 2244 Network Devices, Uninterruptible Power Supply (UPS) 3000 VA On-line Rack/Wall/Tower UPS with 8 outlets per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2244: Minuteman Power Technologies, Endeavor Model Number: ED3000RTXL2U or approved equivalent. 1 Each 320 CCTO 2246 Network Devices, Uninterruptible Power Supply (UPS) Battery Replacement Module per the following and per State of Florida Approved Products List: Battery Type: Sealed, Non-Spillable, Maintenance-Free, Valve-Regulated, Lead Acid Runtime (Half Load): 12 minutes Runtime (Full Load): 3.5 minutes Ordering Number Logic: CCTO 2246: Battery Replacement Module, Minuteman Power Technologies, Model Number BM0032 or approved equivalent. 1 Each 321 CCTO 2248 Network Devices, Uninterruptible Power Supply (UPS), Battery Replacement Module, per the following and per State of Florida Approved Products List: Battery Type: Sealed, Non-Spillable, Maintenance-Free, Valve-Regulated, Lead Acid Runtime (Half Load): 12.7 minutes Runtime (Full Load): 5.0 minutes Ordering Number Logic: CCTO 2248: Battery Replacement Module, Minuteman Power Technologies, Model Number BM0036 or approved equivalent. 1 Each 322 CCTO 2250 Network Devices, HDRM100 L2 Industrial 4G Wireless Wifi Router, per the following: Ordering Number Logic: CCTO 2250: M2M Dynamics, Inc., Part Number: HDRM100 L2, or approved equivalent. 1 Each 323 CCTO 2306a Power Supplies (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Uninterruptible Power Supply with Real Time Active Power Conditioner, Automatic Transfer Switch, and Generator Connection. Generator compartment shall be on left side of cabinet. The continuous AC output shall be a minimum of 1400 watts load. Ordering Number Logic: CCTO 2306a: Ordering Number Logic: Clary SP2000LX with Temple Low profile cabinet to mount on existing traffic signal cabinet or approved equivalent 1 Each 8,325.00$ 324 CCTO 2306b Power Supplies (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Uninterruptible Power Supply with Real Time Active Power Conditioner, Automatic Transfer Switch, and Generator Connection. Generator compartment shall be on left side of cabinet. The continuous AC output shall be a minimum of 1400 watts load. Ordering Number Logic: CCTO 2306b: Ordering Number Logic: Clary SP2000LX with Temple pad mount cabinet or approved equivalent 1 Each 8,325.00$ 325 CCTO 2306c Power Supplies (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: The continuous AC output shall be a minimum of 1400 watts load. Ordering Number Logic: CCTO 2306c: Ordering Number Logic: Clary SP2000LX or approved equivalent 1 Each 3,790.00$ 326 CCTO 2308a Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 41 amp hour battery Order Quantity: 40 Ordering Number Logic: CCTO 2308a: Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 40 40 Each 208.76$ 327 CCTO 2308b Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 41 amp hour battery Order Quantity: 80 Ordering Number Logic: CCTO 2308b: Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 80 80 Each 194.79$ 328 CCTO 2308c Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 41 amp hour battery Order Quantity: 120 Ordering Number Logic: CCTO 2308c: Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 120 120 Each 190.75$ 329 CCTO 2308d Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 41 amp hour battery Order Quantity: 160 Ordering Number Logic: CCTO 2308d: Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 160 160 Each 188.98$ 330 CCTO 2308e Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 41 amp hour battery Order Quantity: 200 Ordering Number Logic: CCTO 2308e Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 200 200 Each 188.11$ 331 CCTO 2308aa Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 51 amp hour battery Order Quantity: 40 Ordering Number Logic: CCTO 2308aa: Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 40 40 Each 241.87$ 332 CCTO 2308ab Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 51 amp hour battery Order Quantity: 80 Ordering Number Logic: CCTO 2308ab: Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 80 80 Each 227.85$ 333 CCTO 2308ac Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 51 amp hour battery Order Quantity: 120 Ordering Number Logic: CCTO 2308ac: Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 120 120 Each 223.81$ 334 CCTO 2308ad Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 51 amp hour battery Order Quantity: 160 Ordering Number Logic: CCTO 2308ad: Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 160 160 Each 222.15$ 335 CCTO 2308ae Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Outpost 12 Volt, 51 amp hour battery Order Quantity: 200 Ordering Number Logic: CCTO 2308ae: Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 200 200 Each 221.34$ 336 CCTO #2305a Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Alphacell 12 Volt, 100 amp hour battery Order Quantity: 40 Ordering Number Logic: CCTO 2305a: Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 40 40 Each 221.30$ 337 CCTO 2305b Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Alphacell 12 Volt, 100 amp hour battery Order Quantity: 80 Ordering Number Logic: CCTO 2305b: Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 80 80 Each 217.87$ 338 CCTO 2305c Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Alphacell 12 Volt, 100 amp hour battery Order Quantity: 120 Ordering Number Logic: CCTO 2305c: Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 120 120 Each 217.77$ 339 CCTO 2305d Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Alphacell 12 Volt, 100 amp hour battery Order Quantity: 160 Ordering Number Logic: CCTO 2305d: Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 160 160 Each 216.83$ Additional equivalents can be placed on a separate sheet of paper.14 of 20 16.A.21.a Packet Pg. 792 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 340 CCTO 2305e Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: Alphacell 12 Volt, 100 amp hour battery Order Quantity: 200 Ordering Number Logic: CCTO 2305e: Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 200 200 Each 216.77$ 341 CCTO 2350 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc VG5 Autodome Series Camera with mount with model number: VG5-ITS1080P-30X5 HD 1080p resolution at 30 images per second (ips) Includes Candy Cane pipe mount and interface Includes Power Supply Ordering Number Logic: CCTO 2350: Bosch Security Systems, Inc, Model VG5-ITS1080P-30X5 or approved equivalent 1 Each 2,599.99$ Does not meet specifications 342 CCTO 2352 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Power Supply plug-in Transformer ELK-TRG2440 24 VAC, 40VA Ordering Number Logic: CCTO 2352: ELK Products, Inc, Model ELK-TRG2440 or approved equivalent. 1 Each 19.99$ Does not meet specifications 343 CCTO 2353 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Interface Board Pipe Mount Ordering Number Logic: CCTO 2353: Bosch VG4-A-95423, AutoDome Pipe Mount with Interface Board or approved equivalent. 1 Each 69.99$ Does not meet specifications 344 CCTO 2354a CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc BOSCH VIP-X1XF-E Video External Encoder Single Channel: Includes Bosch 12 VDC power supply for use with VIP X1 XF E, Order number UPA-1216-50. Includes Bosch MVS-FENC-AES BVIP AES 128 Bit Encryption site license, Order number MVS-FENC-AES Ordering Number Logic: CCTO 2354a: Bosch Security Systems Inc., Order number VIP-X1XF-E or approved equivalent. 1 Each Does not meet specifications 345 CCTO 2354b CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc BOSCH VIP-X1XF-E Video External Encoder Single Channel: Ordering Number Logic: CCTO 2354b: Bosch 12 VDC power supply for use with VIP X1 XF E, Order number UPA-1216-50 or approved equivalent. 1 Each Does not meet specifications 346 CCTO 2354c CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc BOSCH VIP-X1XF-E Video External Encoder Single Channel: Ordering Number Logic: CCTO 2354c: Bosch MVS-FENC-AES BVIP AES 128 Bit Encryption site license, Order number MVS-FENC-AES or approved equivalent. 1 Each 347 CCTO 2356 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: CCTV Camera Mount Material: 1 ½ inch Schedule 40 Aluminum Finish: None Threaded at both ends Includes one 1 ½ inch threaded aluminum coupling. Ordering Number Logic: CCTO 2356: ITS Express Inc., Part Number: Candy Cane Mount or approved equivalent 1 Each 169.99$ 448.00$ 348 CCTO 2109 CCTV Camera Ethernet Extender Cabinet per the following and per State of Florida Approved Products List: Ethernet extender cabinet shall include all type 1 cabinet interior components and wiring (excluding ethernet injector) as shown on the “Interior view/wiring” diagram in the Collier County Signalization Technical Special Provisions, sheet No. TSP-39. Cabinet: Type 1 with #2 slam lock. Finish: None Ordering Number Logic: CCTO 2109: Temple Inc., Part Number: TF4001-EE (Ethernet Extender Cabinet) or approved equivalent 1 Each 821.00$ 349 CCTO 2358 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: POE (power over ethernet) for CAT 5e or Cat6 POE converter with POE in, extended POE out, and SAFEVIEW™ display, for base side (switch) installation. Ordering Number Logic: CCTO 2358: Veracity USA, Inc., Longspan, Part Number: VLS-1P-B or approved equivalent 1 Each 350 CCTO 2360 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: POE (power over ethernet) for CAT 5e or Cat6 POE converter with POE out, extended POE in, and SAFEVIEW™ display, for camera side (remote device) installation Ordering Number Logic: CCTO 2360: Veracity USA, Inc., Longspan, Part Number: VLS-1P-C or approved equivalent 1 Each 351 CCTO 2362 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: POE (power over ethernet) for CAT 5e or Cat6 57V 800mA power supply for POE Ordering Number Logic: CCTO 2362: Veracity USA, Inc., Part Number: VPSU-57V-800 or approved equivalent 1 Each 352 CCTO 0000a CCTV Camera Cable, Two Element Composite Cable per the following: Composite cable containing 1 CAT6A cable and 1 Power line (3 conductors). Spool Size: 1000 feet. CAT6A Cable: Conductor Size: 12 AWG stranded each 1 Each 353 CCTO 0000b CCTV Camera Cable, Two Element Composite Cable per the following: Composite cable containing 1 CAT6A cable and 1 Power line (3 conductors). Spool Size: 1000 feet. CAT6A Cable: Conductor Size: 14 AWG stranded each 1 Each 1,206.00$ 354 CCTO 2402a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2402a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,053.00$ 355 CCTO 2404a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2404a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,195.00$ 356 CCTO 2406a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2406a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,280.00$ 357 CCTO 2408a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2408a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,422.00$ 358 CCTO 2410a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2410a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,510.00$ 359 CCTO 2412a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2412a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,890.00$ 360 CCTO 2414a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2414a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 24" (Width x Height), Single Sided or approved equivalent 1 Each 1,988.00$ 361 CCTO 2416a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2416a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,115.00$ 362 CCTO 2418a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2418a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,262.00$ 363 CCTO 2420a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2420a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,353.00$ 364 CCTO 2422a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2422a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,503.00$ 365 CCTO 2424a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2424a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,595.00$ 366 CCTO 2426a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2426a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 1,997.00$ Additional equivalents can be placed on a separate sheet of paper.15 of 20 16.A.21.a Packet Pg. 793 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 367 CCTO 2428a Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2428a: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 30" (Width x Height), Single Sided or approved equivalent 1 Each 2,102.00$ 368 CCTO 2402b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2402b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 1,307.00$ 369 CCTO 2404b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2404b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 1,508.00$ 370 CCTO 2406b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2406b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 1,650.00$ 371 CCTO 2408b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2408b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 1,852.00$ 372 CCTO 2410b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2410b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 1,996.00$ 373 CCTO 2412b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2412b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 2,583.00$ 374 CCTO 2414b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2414b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 24" (Width x Height), Double Sided or approved equivalent 1 Each 2,745.00$ 375 CCTO 2416b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2416b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 1,396.00$ 376 CCTO 2418b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2418b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 1,608.00$ 377 CCTO 2420b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2420b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 1,762.00$ 378 CCTO 2422b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2422b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 1,978.00$ 379 CCTO 2424b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2424b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 2,130.00$ 380 CCTO 2426b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2426b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 2,756.00$ 381 CCTO 2428b Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2428b: Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 30" (Width x Height), Double Sided or approved equivalent 1 Each 2,934.00$ 382 CCTO 3146 LED Illuminated Sign, 40 watts, AC to DC Single Output Switching power supply per the following: Input Voltage: 120 VAC Fixed Output Voltage: 24VDC Ordering Number Logic: CCTO 3146: High Perfection Tech. CO., Ltd, Part Number: LP1040-24-C1670 or approved equivalent 1 Each 383 CCTO 3148 Illuminated Sign 60 watts, Single Output Switching Power Supply per the following: Input Voltage: 120 VAC DC Voltage Range: 9-42V Ordering Number Logic: CCTO 3148: Mean Well (MW), Part Number: LPC-60-1400 or approved equivalent 1 Each 384 CCTO 3150 Illuminated Sign Fluorescent Ballast per the following: Input Voltage: 120 VAC For Lamp Type: F96T12/HO Ordering Number Logic: CCTO 3150: Phillips Advance, Centium T12HO, Part number: ICN-2S110-SC or approved equivalent 1 Each 385 CCTO 3152 Illuminated Sign Fluorescent Ballast per the following: Input Voltage: 120 VAC For Lamp Type: F24T12/HO, F48T12/HO, F72T8/HO, F96T12/HO Ordering Number Logic: CCTO 3152: Phillips Advance, Signpro, Part number: ISB-0432-14-E or approved equivalent 1 Each 386 CCTO 2430a Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2430a: Availed Technologies Corp., Availed 20W Solar Engine - 24 Hour, Part Number: AVSE-200, or approved equivalent 1 Each 1,129.00$ 387 CCTO 2430b Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2430b: Availed Technologies Corp., U-Channel Post Top Mounting Bracket for Solar Engine, Part Number: MBV09632-001, or approved equivalent 1 Each 30.00$ 388 CCTO 2430c Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2430c: Availed Technologies Corp., Bolt Kit, 2” Square or U Channel Pole, Part Number: MBV09629-004, or approved equivalent 1 Each 30.00$ 389 CCTO 2430d Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: Ordering Number Logic: CCTO 2430d: Availed Technologies Corp., 12Ah 12V 144Wh SLA Battery (Extended Capacity), Part Number: MBV09618-002, or approved equivalent 1 Each 90.00$ 390 CCTO 2430e Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430e: Availed Technologies Corp., 30" LED R1-1 Stop Sign, Part Number: AVS30-R1-1, or approved equivalent. 1 Each 1,589.00$ 391 CCTO 2430f Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430f: Availed Technologies Corp., 36" LED R1-1 Stop Sign, Part Number: AVS36-R1-1, or approved equivalent 1 Each 1,654.00$ 392 CCTO 2430g Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430g: Availed Technologies Corp., 48" LED R1-1 Stop Sign, Part Number: AVS48-R1-1, or approved equivalent. 1 Each 1,769.00$ 393 CCTO 2430h Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430h: Availed Technologies Corp., 30" LED Diamond Shaped Warning Sign, Part Number: AVS30-D- WXX-XX, or approved equivalent. 1 Each 1,616.00$ Additional equivalents can be placed on a separate sheet of paper.16 of 20 16.A.21.a Packet Pg. 794 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 394 CCTO 2430i Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430i: Availed Technologies Corp., 36" LED Diamond Shaped Warning Sign, Part Number: AVS36-D-WXX- XX, or approved equivalent. 1 Each 1,670.00$ 395 CCTO 2430j Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2430j: Availed Technologies Corp., 48" LED Diamond Shaped Warning Sign, Part Number: AVS48-D-WXX- XX, or approved equivalent. 1 Each 1,797.00$ 396 CCTO 2430k Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Rectangular Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2404k: Availed Technologies Corp., 24" w X 30" h LED Rectangular Regulatory or Warning Sign, Part Number: AVS24X30-XXX-XX, or approved. equivalent. 1 Each 1,586.00$ 397 CCTO 2430l Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: LED Enhanced Rectangular Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009. Ordering Number Logic: CCTO 2404l: Availed Technologies Corp., 30" w X 36" h LED Rectangular Regulatory or Warning Sign, Part Number: AVS30X36-XXX-XX, or approved. equivalent. 1 Each 1,639.00$ 398 CCTO 2964 Sign Hanger Assembly, Span Wire, Tri-Stud, per the following and per State of Florida Approved Products List. Sign mount: 16” aluminum Directions: 1-Way Paint No Color Ordering Number Logic: CCTO 2964: Pelco Products, Inc. Part No. SP-1032-FL-PNC or approved equivalent 1 Each 123.33$ 118.00$ 399 CCTO 2966 Sign Hanger Assembly, Span Wire, Tri-Stud, per the following and per State of Florida Approved Products List. Sign mount: 16” aluminum Directions: 2-Way Paint no color Ordering Number Logic: CCTO 2966: Pelco Products, Inc. Part No. SP-1031-FL-PNC or approved equivalent 1 Each 169.70$ 163.00$ 400 CCTO 2978a Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 18” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978a Pelco Products, Inc. Part No.: SP-1010-FL-18-84-PNC or approved equivalent 1 Each 117.47$ 115.00$ 401 CCTO 2978b Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 24” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978b: Pelco Products, Inc. Part No.: SP-1010-FL-24-84-PNC or approved equivalent 1 Each 124.76$ 121.00$ 402 CCTO 2978c Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 30” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978c:: Pelco Products, Inc. Part No.: SP-1010-FL-30-84-PNC or approved equivalent 1 Each 129.29$ 124.00$ 403 CCTO 2978d Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 36” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978d: Pelco Products, Inc. Part No.: SP-1010-FL-36-84-PNC or approved equivalent 1 Each 134.53$ 127.00$ 404 CCTO 2978e Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 42” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978e: Pelco Products, Inc. Part No.: SP-1010-FL-42-84-PNC or approved equivalent 1 Each 142.59$ 130.00$ 405 CCTO 2978f Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 48” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978f: Pelco Products, Inc. Part No.: SP-1010-FL-48-84-PNC or approved equivalent 1 Each 149.76$ 133.00$ 406 CCTO 2978g Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 60” Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2978g: Pelco Products, Inc. Part No.: SP-1010-FL-60-84-PNC or approved equivalent 1 Each 159.03$ 137.00$ 407 CCTO 2982a Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 18” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982a: Pelco Products, Inc. Part No.: SP-1010-FL-18-120 or approved equivalent 1 Each 126.94$ 126.00$ 408 CCTO 2982b Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 24” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982b: Pelco Products, Inc. Part No.: SP-1010-FL-24-120-PNC or approved equivalent 1 Each 134.29$ 131.00$ 409 CCTO 2982c Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 30” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982c: Pelco Products, Inc. Part No.: SP-1010-FL-30-120-PNC or approved equivalent 1 Each 140.59$ 136.00$ 410 CCTO 2982d Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 36” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982d: Pelco Products, Inc. Part No.: SP-1010-FL-36-120-PNC or approved equivalent 1 Each 147.65$ 140.00$ 411 CCTO 2982e Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 42” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982e: Pelco Products, Inc. Part No.: SP-1010-FL-42-120-PNC or approved equivalent 1 Each 153.88$ 142.00$ 412 CCTO 2982f Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 48” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982f: Pelco Products, Inc. Part No.: SP-1010-FL-48-120-PNC or approved equivalent 1 Each 161.21$ 146.00$ 413 CCTO 2982g Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 60” Cable Length: 120” Paint no color Ordering Number Logic: CCTO 2982g: Pelco Products, Inc. Part No.: SP-1010-FL-60-120-PNC or approved equivalent 1 Each 168.97$ 147.00$ 414 CCTO 2975a Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 18” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975a: Pelco Products, Inc. Part No.: SP-1010-FL-18-144-PNC or approved equivalent 1 Each 129.88$ 129.00$ Additional equivalents can be placed on a separate sheet of paper.17 of 20 16.A.21.a Packet Pg. 795 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 415 CCTO 2975b Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 24” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975b: Pelco Products, Inc. Part No.: SP-1010-FL-24-144-PNC or approved equivalent 1 Each 139.76$ 135.00$ 416 CCTO 2975c Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 30” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975c: Pelco Products, Inc. Part No.: SP-1010-FL-30-144-PNC or approved equivalent 1 Each 143.65$ 139.00$ 417 CCTO 2975d Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 36” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975d: Pelco Products, Inc. Part No.: SP-1010-FL-36-144-PNC or approved equivalent 1 Each 151.76$ 143.00$ 418 CCTO 2975e Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 42” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975e: Pelco Products, Inc. Part No.: SP-1010-FL-42-144-PNC or approved equivalent 1 Each 158.12$ 145.00$ 419 CCTO 2975f Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 48” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975f: Pelco Products, Inc. Part No.: SP-1010-FL-48-144-PNC or approved equivalent 1 Each 164.85$ 149.00$ 420 CCTO 2975g Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. Tube Length (CTC): 60” Cable Length: 144” Paint no color Ordering Number Logic: CCTO 2975g: Pelco Products, Inc. Part No.: SP-1010-FL-60-144-PNC or approved equivalent 1 Each 173.82$ 151.00$ 421 CCTO 2981a Sign Hanger Assembly, Mast arm, Free Swinging Cable Mount per the following and per State of Florida Approved Products List. Mast Arm Mini-Brac Mount Cable Length: 45" Paint no color Ordering Number Logic: CCTO 2981a: Pelco Products, Inc. Part No.: SP-1072-FL-45-PNC or approved equivalent 1 Each 274.71$ 278.00$ 422 CCTO 2981b Sign Hanger Assembly, Mast arm, Free Swinging Cable Mount per the following and per State of Florida Approved Products List. Mast Arm Mini-Brac Mount Cable Length: 62” Paint no color Ordering Number Logic: CCTO 2981b: Pelco Products, Inc. Part No.: SP-1072-FL-62-PNC or approved equivalent 1 Each 283.35$ 289.00$ 423 CCTO 2981c Sign Hanger Assembly, Mast arm, Free Swinging Cable Mount per the following and per State of Florida Approved Products List. Mast Arm Mini-Brac Mount Cable Length: 84” Paint no color Ordering Number Logic: CCTO 2981c: Pelco Products, Inc. Part No.: SP-1072-FL-84-PNC or approved equivalent 1 Each 294.65$ 300.00$ 424 CCTO 2983 216) CCTO 2983 Sign Hanger Assembly, Mast arm, Free Swinging Large Hub Mount per the following and per State of Florida Approved Products List. Large hub mount Paint no color Ordering Number Logic: CCTO 2983: Pelco Products, Inc. Part No.: SP-1074-FL-PNC or approved equivalent 1 Each 242.47$ 243.00$ 425 CCTO 2985a Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2985a: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 6’ arm or approved equivalent 1 Each 1,333.00$ 426 CCTO 2985b Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2985b: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 8’ arm or approved equivalent 1 Each 1,372.00$ 427 CCTO 2985c Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2985c: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 10’ arm or approved equivalent 1 Each 1,410.00$ 428 CCTO 2985d Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2985d: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 12’ arm or approved equivalent 1 Each 1,482.00$ 429 CCTO 2985e Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2985e: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 14’ arm or approved equivalent 1 Each 1,585.00$ 430 CCTO 2987a Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2987a: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 6’ arm or approved equivalent 1 Each 1,951.00$ 431 CCTO 2987b Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2987b: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 8’ arm or approved equivalent 1 Each 2,016.00$ 432 CCTO 2987c Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2987c: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 10’ arm or approved equivalent 1 Each 2,197.00$ 433 CCTO 2987d Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2987d: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 12’ arm or approved equivalent 1 Each 2,307.00$ 434 CCTO 2987e Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2987e Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 14’ arm or approved equivalent 1 Each 2,404.00$ 435 CCTO 2989a Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2989a: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 6’ arm or approved equivalent 1 Each 1,773.00$ 436 CCTO 2989b Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2989b: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 8’ arm or approved equivalent 1 Each 1,812.00$ 437 CCTO 2989c Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2989c: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 10’ arm or approved equivalent 1 Each 1,850.00$ Additional equivalents can be placed on a separate sheet of paper.18 of 20 16.A.21.a Packet Pg. 796 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 438 CCTO 2989d Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2989d: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 12’ arm or approved equivalent 1 Each 1,922.00$ 439 CCTO 2989e Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2989e: Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 14’ arm or approved equivalent 1 Each 2,025.00$ 440 CCTO 2991a Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2991a: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 6’ arm or approved equivalent 1 Each 2,431.00$ 441 CCTO 2991b Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2991b: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 8’ arm or approved equivalent 1 Each 2,496.00$ 442 CCTO 2991c Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2991c: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 10’ arm or approved equivalent 1 Each 2,677.00$ 443 CCTO 2991d Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2991d: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 12’ arm or approved equivalent 1 Each 2,787.00$ 444 CCTO 2991e Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. 150 mph wind load rated. Ordering Number Logic: CCTO 2991e: Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 14’ arm or approved equivalent 1 Each 2,884.00$ 445 CCTO 2702 Pull Box (Box) per the following and per State of Florida Approved Products List: Heavy Duty, Rated: 20,000 lb. Inside Dimensions: Width: 13 Inches, Length: 24 Inches, Depth: 12 Inches. 1 Each 446 CCTO 2704 Pull Box (Cover) per the following and per State of Florida Approved Products List: Heavy Duty w/2 Bolts, Rated: 20,000 lb. Manufacturer’s logo shall be stamped on each pull box cover along with the words “TRAFFIC CONTROL”. Ordering Number Logic: 1 Each 447 CCTO 2706 Pull Box (Box) per the following and per State of Florida Approved Products List: Heavy Duty, Rated: 20,000 lb. Inside Dimensions: Width: 17 Inches, Length: 30 Inches, Depth: 12 Inches. Ordering Number Logic: 1 Each 448 CCTO 2708 Pull Box (Cover) per the following and per State of Florida Approved Products List: Heavy Duty w/2 Bolts, Rated: 20,000 lb. Manufacturer’s logo shall be stamped on each pull box cover along with the words “TRAFFIC SIGNAL”. Ordering Number Logic: 1 Each 449 CCTO 2710 Pull Box (Box) per the following and per State of Florida Approved Products List: Heavy Duty, Rated: 20,000 lb. Inside Dimensions: Width: 24 Inches, Length: 36 Inches, Depth: 24 Inches. 1 Each 450 CCTO 2712 Pull Box (Cover) per the following and per State of Florida Approved Products List: Heavy Duty w/2 Bolts, Rated: 20,000 lb. Manufacturer’s logo shall be stamped on each pull box cover along with the words “CCTO COMMUNICATIONS”. Ordering Number Logic: 1 Each 451 CCTO 2504 Ground Rod per the following: Diameter: 5/8 inch Length Each: 10 ft. Ordering Number Logic: 1 Each 452 CCTO 2506 Ground Rod Couplings per the following: For Rod Size: 5/8 inch Threaded for Standard Sectional Rods 1 Each 453 CCTO 2508 Ground Rod Clamps per the following: For Rod Size: 5/8 inch Bolt Type: Hex Head Ordering Number Logic: 1 Each 454 CCTO 2510 Exothermic Grounding per the following: Connect #6 stranded wire to 5/8 inch Ground Rod Ordering Number Logic: 1 Each 455 CCTO 3104 Strand Link, 1/4 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 1/4 inch Ordering Number Logic: 1 Each 456 CCTO 3106 Strand Link, 3/8 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 3/8 inch Ordering Number Logic: CCTO 3106: MacLean Power Systems Part# 5042 or approved equivalent 1 Each 457 CCTO 3108 Strand Link, 7/16 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 7/16 inch Ordering Number Logic: CCTO 3108: MacLean Power Systems Part# 5043 or approved equivalent 1 Each 458 CCTO 3110 Strand Link, 1/2 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 1/2 inch Ordering Number Logic: 1 Each 459 CCTO 3112 Strand Vice, 1/4 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 1/4 inch Bail Type: A (Standard) Odi N b Li 1 Each 460 CCTO 3114 Strand Vice, 3/8 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 3/8 inch Bail Type: A (Standard) 1 Each 461 CCTO 3116 Strand Vice, 7/16 inch, for Utility Grade Steel Strand per the following: Primary Strand Application: 7/16 inch Bail Type: A (Standard) Ordering Number Logic: 1 Each 462 CCTO 3118 Strand Vice, 1/2 inch, for Utility Grade Steel Strand per the following: Primary Strand Application = 1/2 inch Bail Type: A (Standard) Ordering Number Logic: 1 Each 463 CCTO 3120 Cable, 3/8 inch Utilities Grade Steel Strand per the following: Required minimum breaking strength: 11,500 pounds. 1000 ft spool length 1 Each 464 CCTO 3122 Cable, 7/16 inch Utilities Grade Steel Strand per the following: Required minimum breaking strength: 18,000 pounds. 1000 ft. spool length Ordering Number Logic: 1 Each 465 CCTO 3124 Cable, 1/2 inch Utilities Grade Steel Strand per the following: Required minimum breaking strength: 25,000 pounds. 1000 ft. spool length 1 Each 466 CCTO 3126 Utility Pole Hardware per the following: Fiberglass Insulator Minimum Strength (lb) - 36,000 Rod Length: 120 inches (10 ft ) 1 Each 467 CCTO 3128 Pole Line Hardware per the following: Square Washer Hole Size: for 3/4” Bolt Size: 3/16” x 3” 1 Each 468 CCTO 3130 Oval Eyebolt per the following: 3/4 Inch Diameter Minimum Tensile Strength 20,050 Lbs. Bolt Length: 16 Inches 1 Each 469 CCTO 3132 Oval Eyebolt per the following: 3/4 Inch Diameter Minimum Tensile Strength 20,050 Lbs. 1 Each 470 CCTO 3134 Oval Eyebolt per the following: 3/4 Inch Diameter Minimum Tensile Strength 20 050 Lbs 1 Each 471 CCTO 3136 Eyelet, Angle, per the following: For 3/4 Inch Diameter bolt Ordering Number Logic: 1 Each 472 CCTO 3137 Eyelet per the following: For 3/4 Inch Diameter bolt Ordering Number Logic: 1 Each 473 CCTO 0000a Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: 100 Carton 474 CCTO 0000b Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000b Multicom Inc Lashing Rods Diameter Range: 750” to 839” Catalog Number: LR-6106 or approved 100 Carton 475 CCTO 0000c Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000c Multicom Inc Lashing Rods Diameter Range: 840” to 939” Catalog Number: LR 6107 or approved 100 Carton 476 CCTO 0000d Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000d Multicom Inc Lashing Rods Diameter Range: 940” to 1 049” Catalog Number: LR-6108 or 100 Carton 477 CCTO 0000e Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000e Multicom Inc Lashing Rods Diameter Range: 1 050” to 1 169” Catalog Number: LR-6109 or 100 Carton 478 CCTO 0000f Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000f Multicom Inc Lashing Rods Diameter Range: 1 170” to 1 309” Catalog Number: LR 6110 or 100 Carton 479 CCTO 0000g Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000g Multicom Inc Lashing Rods Diameter Range: 1 310” to 1 459” Catalog Number: LR 6111 or 100 Carton 480 CCTO 0000h Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: 100 Carton 481 CCTO 0000i Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: 100 Carton 482 CCTO 0000j Lashing Rods per the following: Units: 100 per carton Ordering Number Logic: CCTO 0000j Multicom Inc Lashing Rods Diameter Range: 1 820” to 2 039” Catalog Number: LR 6114 or 100 Carton Additional equivalents can be placed on a separate sheet of paper.19 of 20 16.A.21.a Packet Pg. 797 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Project Manager: Randy Ensell Procurement: Viviana Giarimoustas Opened: 7/30/19 Witness: Sara Schneeberger Bid Tabulation #19-7607 Traffic Operations Signal Component Hardware Notifications Sent:6,592 Downloaded: 74 Submissions:9 Line Item Number CCTO Number Description Estimated Quantity Unit of Measure Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price Unit Price 483 CCTO 1702 Traffic Signal Cable, IMSA 50-2, Stranded, AWG 14, 2 Conductors per the following: IMSA Specification: 50-2 Cable Length: 5000 ft Spool 1 Each 484 CCTO #2602a Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft Spool 1 Each 485 CCTO #2602b Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft. Spool 1 Each 486 CCTO #2602c Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft Spool 1 Each 487 CCTO #2602d Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft Spool 1 Each 488 CCTO #2602e Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft Spool 1 Each 489 CCTO #2602f Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: IMSA Specification: 19-1 Cable Length: 2000 ft Spool 1 Each 490 CCTO 2604a Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft. Spool Odi N b Li 1 Each 491 CCTO 2604b Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft. Spool 1 Each 492 CCTO 2604c Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft Spool 1 Each 493 CCTO 2604d Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft Spool 1 Each 494 CCTO 2604e Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft Spool 1 Each 495 CCTO 2604f Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: IMSA Specification: 20-1 Cable Length: 2000 ft. Spool 1 Each 496 CCTO 2802a Wire, XHHW, Stranded, #6 AWG per the following: Conductor Size (AWG): 6 Length: 500 ft Spools 1 Each 497 CCTO 2802b Wire, XHHW, Stranded, #6 AWG per the following: Conductor Size (AWG): 6 Length: 500 ft Spools 1 Each 498 CCTO 2802c Wire, XHHW, Stranded, #6 AWG per the following: Conductor Size (AWG): 6 Length: 500 ft Spools 1 Each 499 CCTO 2804 Load Center, 100A, Fixed - Factory installed main lugs, 120/240VAC per the following: Spaces: 6 Ampere Rating: 100A Voltage Rating: 120/240VAC 1 Each 500 CCTO 2805 Meter Base, per the following: Meter Base approved by Florida Power & Light (FPL). Material: Aluminum, Type 3R, UL Listed 1 Each 501 CCTO 2806 Lightning Arrester, Controller Cabinet (Electric Power Service Index 17736 -2002) per the following: Color coded 18” leads at 14 gauge. 120/240 volt single phase 2 pole 3 wire up to 1000 amp service capacity 1 Each 502 CCTO 2824 Contactor, 40A, 3HP@115VAC per the following: Ampere Rating: 40A Maximum Voltage Rating: 600VAC 1 Each 503 CCTO 2826 Terminal Strips, 12 Circuit per the following: Product Description: 12 Circuit Terminal Strip Electrical Rating – 30 amps, 600 volts. 1 Each YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO Form 2: Vendor Check List YES YES YES YES YES YES YES YES NO YES YES YES YES YES YES YES YES NO YES YES YES YES YES YES YES YES NO YES YES YES YES YES YES YES YES NO YES YES YES YES YES YES YES YES NO NO NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES YES NO YES YES YES YES YES YES YES YES NOE-Verify Form 3: Conflict of Interest Affidavit Description Form 4: Vendor Declaration Statement Form 5: Immigration Affidavit Certification Form 6: Vendor Substitute W – 9 Form 7: Vendor Submittal – Local Vendor Preference Affidavit Insurance and Bonding Additional equivalents can be placed on a separate sheet of paper.20 of 20 16.A.21.a Packet Pg. 798 Attachment: 19-7607 Bid Tabulation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 799 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 800 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 801 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 802 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 803 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 804 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 805 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 806 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Organization Name: Arlington County, Virginia REFERNCE CONTACT NAME CONTACT EMAIL ADDRESS CONTACT PHONE # CONTRACT VALUE Keith R. Thomas krthomas@arlingtonva.us (703)228-6515 $300,000.00 AGENCY ADDRESS AGENCY PHONE # DATE IMPLEMENTED 2100 Clarendon Blvd. Suite 900 Arlington, VA 22201 04/2015 – 2018 Project Description, to include relevance to the appropriate components of this procurement: CT and Intelight are supplying a MAXVIEW Central System and NEMA controllers and ATC engine boards for 300 intersections. Team members have been responsible for converting signal timing databases from the Siemens SEPAC firmware format to the Intelight MAXTIME format, for deploying the new controllers and engine boards in the field and for integrating the updated intersections into the MAXVIEW system. Organization Name: Collier County, FL REREFERNCE CONTACT NAME CONTACT EMAIL ADDRESS CONTACT PHONE # CONTRACT VALUE Pierre-Marie Beauvoir PierreBeauvoir@colliergov.net (239)252-6066 $654,005.00 AGENCY ADDRESS AGENCY PHONE # DATE IMPLEMENTED Growth Management Department Transportation Engineering Division 2885 S. Horseshoe Drive Naples, FL 34104 (239)252-8192 9/2017 – 2018 PROJECT DESCRIPTION, TO INCLUDE RELEVANCE TO THE APPROPRIATE COMPONENTS OF THIS PROCUREMENT: Furnish 233 NEMA ATC TS2-2 Controllers and an ATMS System. These new controllers and ATMS are replacing Siemens Controllers and ACTRA ATMS System with a modern ATC System. There is also a custom software element for an existing detector software reporting package currently in use by the County. We assisted with database conversions, field installations, and system setup/configuration. References: Bid # 19-7607 16.A.21.b Packet Pg. 807 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Organization Name: Orange County, FL REREFERNCE CONTACT NAME CONTACT EMAIL ADDRESS CONTACT PHONE # CONTRACT VALUE Hazem El-Assar, P.E. Hazem.el-assar@ocfl.net (407) 836-7866 $350,000.00 AGENCY ADDRESS AGENCY PHONE # DATE IMPLEMENTED Orange County Traffic 4200 S. John Young Parkway, Bldg. 2 Orlando, FL 32839 (407) 836-7850 2/2019 – present (ongoing) PROJECT DESCRIPTION, TO INCLUDE RELEVANCE TO THE APPROPRIATE COMPONENTS OF THIS PROCUREMENT: CT and Intelight are supplying a MaxView Central System, Intelight Nema X3-2 controllers, and MaxTime local controller software. The Intelight solution is replacing a long-standing Siemens installation. Organization Name: City of Tallahassee, FL REFERENCE CONTACT NAME CONTACT EMAIL ADDRESS CONTACT PHONE # CONTRACT VALUE Wayne Bryan wayne.bryan@talgov.com (850) 891-2080 $984,000.00 AGENCY ADDRESS AGENCY PHONE # DATE IMPLEMENTED RTMC - Public Safety Complex 911 Easterwood Drive Tallahassee, FL 32311 (850) 891-2080 2/2016 – 2019 Project DESCRIPTION, TO INCLUDE RELEVANCE TO THE APPROPRIATE COMPONENTS OF THIS PROCUREMENT: The City of Tallahassee, FL, selected CT and Intelight to provide local controller hardware and software for the purpose of upgrading the City’s traffic signals. Intelight provided the ATC 2070 hardware and its MaxTime local controller software. CT converted the controller databases from the existing controller firmware to the MaxTime format, loaded the databases onto the controllers and performed bench testing prior to deployment. In December 2016, CT mobilized three teams to deploy 265 controllers across the City over two nights with no issues. As part of this project, Intelight provided the MaxTime MIBs to Kimley-Horn along with support and assistance so that support for the MaxTime controller software could be added to the KITS central system software. 16.A.21.b Packet Pg. 808 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 809 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 810 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 811 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 812 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.b Packet Pg. 813 Attachment: 19-7607 Control Technologies Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) INSR ADDL SUBR LTR INSR WVD DATE (MM/DD/YYYY) PRODUCER CONTACT NAME: FAXPHONE (A/C, No):(A/C, No, Ext): E-MAIL ADDRESS: INSURER A : INSURED INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : POLICY NUMBER POLICY EFF POLICY EXPTYPE OF INSURANCE LIMITS(MM/DD/YYYY)(MM/DD/YYYY) COMMERCIAL GENERAL LIABILITY AUTOMOBILE LIABILITY UMBRELLA LIAB EXCESS LIAB WORKERS COMPENSATION AND EMPLOYERS' LIABILITY DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) AUTHORIZED REPRESENTATIVE INSURER(S) AFFORDING COVERAGE NAIC # Y / N N / A (Mandatory in NH) ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? EACH OCCURRENCE $ DAMAGE TO RENTED $PREMISES (Ea occurrence)CLAIMS-MADE OCCUR MED EXP (Any one person)$ PERSONAL & ADV INJURY $ GENERAL AGGREGATE $GEN'L AGGREGATE LIMIT APPLIES PER: PRODUCTS - COMP/OP AGG $ $ PRO- OTHER: LOCJECT COMBINED SINGLE LIMIT $(Ea accident) BODILY INJURY (Per person)$ANY AUTO OWNED SCHEDULED BODILY INJURY (Per accident)$AUTOS ONLY AUTOS AUTOS ONLY HIRED PROPERTY DAMAGE $AUTOS ONLY (Per accident) $ OCCUR EACH OCCURRENCE $ CLAIMS-MADE AGGREGATE $ DED RETENTION $$ PER OTH- STATUTE ER E.L. EACH ACCIDENT $ E.L. DISEASE - EA EMPLOYEE $ If yes, describe under E.L. DISEASE - POLICY LIMIT $DESCRIPTION OF OPERATIONS below POLICY NON-OWNED SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer any rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: CERTIFICATE HOLDER CANCELLATION © 1988-2015 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORDACORD 25 (2016/03) ACORDTM CERTIFICATE OF LIABILITY INSURANCE Hanover Insurance Company Phoenix Insurance Company Allmerica Financial Benefits 11/07/2019 McGriff Insurance Services PO Box 4927 Orlando, FL 32802-4927 407 691-9600 407 691-9600 888-635-4183 Control Technologies Inc 2776 S Financial Court Sanford, FL 32773 22292 25623 41840 19/20 Mstr BAI/BWOS A X X X X ZDJD62348201 07/01/2019 07/01/2020 1,000,000 1,000,000 10,000 1,000,000 2,000,000 2,000,000 C X X AWJD62387301 07/01/2019 07/01/2020 1,000,000 A X X X 0 UHJD62348701 07/01/2019 07/01/2020 10,000,000 10,000,000 B N X UB8J80803A19I3E 01/01/2019 01/01/2020 X 500,000 500,000 500,000 RE: Bid #19-7607 "Traffic Operations Signal Components & Hardware". Additional Insured status is granted to the Certificate Holder with respect to General Liability and is primary and non-contributory if required by written contract per endorsement 'Commercial General Liability Broadening Endorsement' Form #421-2915(06/15). (See Attached Descriptions) Collier County Board of County Commissioners 3295 Tamiami Trail East Naples, FL 34112-4901 1 of 2 #S24639838/M23843204 131CONTRTECClient#: 1400041 PSBE 1 of 2 #S24639838/M23843204 16.A.21.c Packet Pg. 814 Attachment: 19-7607 Control_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SAGITTA 25.3 (2016/03) DESCRIPTIONS (Continued from Page 1) Additional Insured status is granted and is primary and non-contributory with respect to Auto Liability if required by written contract per endorsement 'Blanket Additional Insured-Primary and Non-Contributory' Form #461-0478(12/12). Umbrella is Follow Form. 2 of 2 #S24639838/M23843204 16.A.21.c Packet Pg. 815 Attachment: 19-7607 Control_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Solicitation 19-7607 Form 2: Vendor Checklist IMPTORTAIYT: THIS SIIEET MUST BE SIGNED. Please read carefully, sign in the spaces indicated and return with your Proposal. Vendor should check off each of the following items as the necessary action is completed: U The Solicitation Submittal has been signed. n The Solicitation Pricing Document (Bid Schedule/Quote Schedule/etc.) has been completed and attacbed. n All applicable forms have been signed and included. along with licenses to complete the requirements of the project. D Any addendahave been signedand included. fl Affidavit for Claiming Stafus as a Local Business, if aonlicable. n E-Verifo/lmmigrationAffidavit(MemorandumofUnderstanding). ALL SUBMITTALS MUST HAVE TIIE SOLICITATION I\TUMBERAND]IIILE {-rop t I , rc- (' o.uq-n{ F,o tLo.tt , l,r, iz SrD N Tia-s*i*t Nt . iAtt *<<-r, ,^ , Cs+ cll-$ b 1 'tt4 'l.t3o- 37tt'o Name of Firm: Address: City, State, Zip: Telephone: Email: Representative Sipature : Representative Name:nt4 Aottr4-i (l p. 8E6ngf20192:13PM 16.A.21.d Packet Pg. 816 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Solicitation 19-7607 Form 3: Conflict of Interest Aflidavit The Vendor certifies that, to the best of its howledge and beliei the past and current work on any Collier County project affrliated with this solicitation does not pose ar organizatlonal conflict as described by one of the three categories below: Biased ground rules - The firm has not set the "ground mles" for affrliated past or current Collier Counry project identified above (e.g., writing a procurement's statement of work, specifications, or performing systems engineering and technical direction for the procurement) which appears to skew the competition in favor of my firm. Impaired objectivity - The firm has not performed work on an affiliated past or current Collier Counry project identified above to evaluate proposals / past performance of itself or a competitor, which calls into question the contractor's ability to .snds1 impartial advice to the government. Unequal access to information - The firm has not had access to nonpublic information as part of its performance of a Collier County project identified above which may have provided the contractor (or an affiliate) with an unfair competitive advantage in current or future solicitations and contracts. In addition to this signed afEdavit, tle contractor / veudor must provide the following: I . All documents produced as a result of the work completed in the past or currently being worked on for the above-mentioned project; and 2. Indicate if the information produced was obtained as a matter of public record (in the "sunshine") or through non-public (not in the "sunshine") conversation (s), meeting(s), document(s) andior other means. F'ailure to disclose all material or having an organizational conf'lict in one or more of the three categories above be identified, may result in the disqualification for future solicitations affiliated with the above referenced project(s). By the signature below, the firm (employees, officers and/or agents) certifies, and hereby discloses, that, to the best oftheh knowledge and belief, all relevant facts concerning past, present, or currently planned interest or activity (financial, contractual, organizational. or otherwise) which relates to the project idenrified above has been fully disclosed and does not pose an organizational conflict. Firm: i-r.l ',: ,'.''Iit '..,.r'.-:"',-.. -,.";t-o-,*.r"*, {,,ru.. Signature and Date: Print Name: Title of Signatory:-b 612812019 2:43 PM p. 89 16.A.21.d Packet Pg. 817 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County Solicitation '19-7607 Form 4: Vendor Declaration Statement BOARD OF COUNTY COMMISSIONERS Collier Counfy Government Complex Naples, Florida 34112 Dear Commissioners: The undersigned, as Vendor declares that this response is made without connection or Eurangement with any other person and this proposal is in every respect fair and made in good faith. without collusion or fiaud. The Vendor agrees, if this solicitation submittal is accepted, to execute a Collier County document for the purpose of establishing a formal contractual relationship between the firm and Collier County, for the performance of all requirements to which the solicitation pertains. The Vendor states that the submined is based upon the documents listed by the above referenced Solicitation. Further, the vendor agrees that if awarded a contract for these goods and/or services, the vendor will not be eligible to compete, submit a proposal, be awarded, or perform as a sub-vendor for any future associated with work that is a result ofthis awarded contract lzF AJ -11,ritl r..r &.re AerA" *,$-A,\ , UV q?-f t:-f Firm's l"egal Name: Address: City, State, Zip Code: Florida Certificate of Authority Document Number Federal Tax ldentification Number *CCR # or CAGE Code *Only if Grant Funded Telephone: q5 -)i7vtgL- 714-V1-"J?"* Signature by: (Typed and written) Title: 6128nO192:43PM p, 90 16.A.21.d Packet Pg. 818 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County Additional Contact Information Solicilation 19-7607 Send payments to: (required if different from above) Contact name: Title: Address: Ciry, State, ZIP Telephone: Email: Office servicing Collier County to place orders (required if ditTerent from above) Contact name: Title: Address: City, State. ZIP Telephone: Email: il Company name used as payee 'A,tr r+d c. I ; Fx-: f- b,' a,t'{l r w r*/< 6) fuevre-/rk g/ rA p. 916Dgl2O192:13PM 16.A.21.d Packet Pg. 819 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County Solicitation 19-7607 Form 5: Immigration Affidavit Certification This Affidavit is required and should be signed, notarized by an authorized principal of the firm and submiued with formal solicitation submittals. Further, Vendors are required to enroll in the E-Veriry program, and provide acceptable evidence of their enrollment, at the time of the submission of the Vendor's proposal. Acceptable evidence consists of a copy of the properly completed E-Verifr Company Profile page or a copy of the fully executed E-Verif, Memorandum of Understanding forthe company. Fsilure to include this Affidavit and acceotable evidence of enrollment in the E-Verifv orogram mav deem the Vendor's proposal as non- resoonsive. Collier County will not intentionally award County contracts to any Vendor who knowingly employs unauthorized alien workers, constituting a violation of the employment provision contained in 8 U.S.C. Section 1324 a(e) Section 274A(e) of the Immigration and Nationality Act ("INA"). CollierCountymayconsidertheemploymentbyanyVendorofunauthorizedaliensaviolationofSection2T4A(e)oftheINA. Such Violation by the recipient of the Employment Provisions contained in Section 274A (e) of the INA shall be grounds for unilateral termination of the contract by Collier County. Vendor attests that they are fully compliant with all applicable immigration laws (specifically to the 1986 Immigration Act and subsequent Amendment(s)) and agrees to comply with the provisions of tlte Memorandum of Understanding with E-Veri[ and to provide proof of enrollment in The Employment Eligibility Verification System (E-Verif), operated by the Department of Homeland Security in partnership with the Social Security Administration at tle time of submission of the Vendor's proposal. Conrpany Name Print Name Signature State of &,:.,r,u,t'L.*.:fc irlwv-( []'+ *ii r 7T"I i,* i' f,tW/- NOfnnlul: r$"Wt* WfuWlQfurf Date counry " 0Yiln41/ The signee of these Affidavit guarantees, as evidenced by the swom aflidavit required herein, the truth and accuracy of this affidavit to interrogatories hereinafter made. 62.8nO192:43PM p. 92 16.A.21.d Packet Pg. 820 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) CATIFORNIA ALT.PURPOSE ACKNOWLEDGMENT crvrL coDE s't189 A notary public or other officer completing this certificate verifies only the identity of the individual who signed the document to which this certificate is attached, and not the truthfulness, accuracy, or validity of that document. State of California I county of D't {.at Y(" I on *, Lt!- I I before me, Dqte personally appeared It) a rK lv dfl q k-t' Here lnsert Nome ond Title of Nome(s) of Signer(s) who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(ies), and that by his/her/their signature(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument. Ploce Notory Seol ond/or Stomp Above I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct. WITNESS my hand and offlcial seal. Signature ,rLrlhr^ Signoture of Notory Public Completing this informotion con deter olterotion of the document or froudulent reottqchment of this form to qn unintended document. Title or Type of Document: Document Date: Signe(s) Other Than Named Above: Capacity(ies) Claimed by Signer(s) Signer's Name: El Corporate Officer - Title(s):n Corporate Officer - Title(s): El Partner- n Limited tr General o Partner- n Limited tr General tr lndividual n Attorney in Fact n lndividual Ei Attorney in Fact tr Trustee o Other: n Guardian of Conservator tr Trustee n Other: n Guardian of Conservator Signer is Representing: 42017 National Notary Association 16.A.21.d Packet Pg. 821 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County atr*caaasv----+a..r--d.---ffimffi Form 6: Vendor Substitute W - 9 Request for Taxpayer Identilication Number and Certificstion Solicitation 19-7607 ln accordance with the Internal Revenue Service regulations, Collier County is required to collect the following information for tax reporting purposes from individuals and comparies who do business with the County (including social security numbers if used by the individual or company for tax reporting purposes). Floridastatute 119.071(5)requiresthatthe county notify you in writing of the reason for collecting this information, which will be used for no other puryose than herein stated, Please complete all inforrnation that applies to your business and return with your quote or proposal. 1. General Information (provide all inforrration) *"-} (as shown on income tm return) Business Name 1if differentfrom tupuy-er name) state {.',&zip-S z-IL'7 Tctcnhanp "l t* r,?o *') h^^;t Order Information (Must be lilled out) Address {)", [|uX. I / 1,,0 ; hcL- {citj*t\"ff stut" 5'r zip A^q'1 1l ,t i,".,',f:., .'.,..'ln l, Remit / Payment Information (Must be filled out) Address W:W State tl {t# f *41 k*ait|<-. uv". e^t d,r mru,(brf ft eutvu-(."i<. ca!'>t - 2. Company Status (check only one) _lndividual / Sole Proprietor -]" Corporation -Partnership_Tax Exempt (Federal income tax-exempt entity under Internal Revenue Service guidelines IRC 501 (c) 3) _ Limited Liability Company - Enter the tax classification /D : DitroqmdorJ Entitv C : (larnoration- P -- Partnershio, 3. Taxpayer ldentification Number (for tu reporting pwposes only) 'endors who do not have a TIN, will be required to provide a social security number prior to an 4. Sign and Date Form: Certification: Under 7r I that the shown on this form is correct to"%r,r 4l "'"Shtruq tyt( (WSifulr "ffWhvz"^ 6t28f20192:43PM p. 93 City l) ^,..^-,/*ri,^ City Federal Tax Identification Number (TIN) 16.A.21.d Packet Pg. 822 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County Solicitation 1S7607 Insurance / Bond Typei. X Worker's Compensation 2. ffi Employer's Liability 3. fi Commercial General Liability (Occurence Form) pattemed after the current ISO form 4. ffi Indemnification 5. X Automobile Liability 6. f] Othe. insurance as noted: 7. fl nia bond 8. I Performance and Paynent Bonds Required Limits Statutory Limits of Florida Statutes, Chapter 440 and all Federal Government Statutory Limits and Requirements Evidence of Workers' Compensation coverage or a Certificate of Exemption issued by the State ofFlorida is required. Entities that are forrned as Sole Proprietorships shall not be required to provide a proof of exemption. An application for exemption can be obtained online at h_r.jJir\.;,JitiitflS,ll}*..i,,2;frrn.hi\:!jil.:r*tl $ 500,000_ single limit per occurrence Bodily Injury and Property Damage $_1,000,000_single limit per occurence, $2,000,000 aggr€gate for Bodily Injury Liability and Propeny Damage Liability. This shall include Premises and Operations; Independent Contractors; Products and Completed Operations and Cofltractual Liability. To the maximum extent permitted by Florida law, the Contractor/Vendor shall defend, indemni$ and hold harmless Collier County, its officers and employees from any and all liabilities, damages, losses aud costs, including, but not limited to, reasonable attomeys' fees and paralegals' fees, to the extent caused by the negligence, recklessness, or inteutionally wrongful conduct of the Contractor/ Vendor or anyone employed or utilized by the Contractor/Vendor in the performance of this Agreement. $_1,000,000 Each Occurence; Bodily Iqiury & Property Damage. OwnedArlon-owned/Hired; Automobile Included I Watercraft $ _ Per Occurrence Shall be submitted with proposal response in the form of certified funds, cashiers' check or an irrevocable letter of credit, a cash bond posted with the County Clerk, or proposal bond in a sum equal to SYo of the cost proposal. All checks shall be made payable to the Collier County Board of County Commissioners on a bank or trust company located in the State of Florida and insured by the Federal Deposit Insurance Corporation. For projects in excess of $200,000, bonds shall be submitted with the executed contact by Proposers receiving award, and written far 100Yo of the Contract award amount, the cost borne by the Proposer receiving an award. The Perforrnance and Payment Bonds shall be underwriuen by a surety authorized to do business in the State of Florida and otlerwise acceptable to Owner; provided, however, the surety shall be rated as "A-" or better as to general policy holders rating and Class V or higher rafing as to financial size category and the amount required shall not exceed 5Yo of the reported policy holders' surptus, all as reported in the most current Best Key Rating Guide, published by A.M. Best Company, tnc. of 75 Fulton Street, New York, Irlew York 10038. 9. 10. 11. fi Vendor shall ensure that all subcontractors comply with the same insurance requirements that he is required to meet. The same Vendor shall provide County with certificates of insurance meeting the required insurance provisions. X Collier County must be named as "ADDITIONAL INSIIRED" on the Insurance Certificate for Commercial General Liability where required. This insurance shall be primary and non-contributory with respect to any otler insurance maintained by, or available for the benefit of, the Additional Insured and the Vendor's policy shall be endorsed accordingly. X The Certificate Holder shall be named as Collier County Board of County Commissioners, OR- Board of County Commissioners in Collier County, OR Collier County Govemment, OR Collier County. The Certificates of Insurance must state the Contract Number, or Project Number, or specific Project description, or must read: For any and all work performed on behalf of Collier County. 6128120192:43PM p. 97 16.A.21.d Packet Pg. 823 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Collier County Solicitation 19-7607 E On all certilicates, the Certificate Holder must read: Collier County Board of Commissioners, 3295 Tamiami Trail East, Naples, FL34ll2 fi fnirty (30) Days Cancellation Notice required. Collier County shall procure and maintain Builders Risk Insurance on all construction projects where it is deemed necessary. Such coverage shall be endorsed to cover the interests of Collier County as well as the Contractor. Premiums shall be billed to the project and the Contractor shall not include Builders Risk premiums in its project proposal or project billings. All questions regarding Builder's Risk Insurance will be addressed by the Collier County Risk Management Division. 6/2Ut9 - CC Vendor's Insurance Statement We understand the insurance requirements of these specifications and that the evidence of insurability may be required within five (5) days of the award of this solicitation. The insurance submitted must provide coverage for a minimum of six (6) months from the date ofaward. Name of Firm Vendor Signature Print Name Insurance Agency Agent Name r /zr i9 Telephone Number 12. 13. t4. i . ,-- Date n { *,4s h 81? L t l n,s,tt /,rtL.? Lr , p"-6n ,L-- 3;j,r,t- ttq:'."etl Zi* ^lVb *J-/CI,f 6l2EnO192:43PM p. 98 16.A.21.d Packet Pg. 824 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Features • Completely weatherproof • Flexible interior layouts • Easy access • Wide variety of options • Constructed from type-5052-H32 aluminum with a minimum thickness of 0.125 inches • Designed and manufactured with materials that will allow rigid mounting, whether intend- ed for pole, base or pedestal mounting; will not flex on mount • A rain channel is incorporated into the design of the main door opening to prevent liquids from entering the enclosure. The door open- ing is a minimum of 80 percent of the front surface of the cabinet and a stiffener plate is welded across the inside of the main door to prevent flexing. • The top of the cabinet incorporates a 1-inch slope from the front toward the rear preventing rain accumulation. • Unless otherwise specified, the cabinet is supplied with a natural aluminum finish. • Where painted cabinets are specified, the exterior is degreased and primed with a four- stage iron phosphate coat prior to painting. The final coat consists of a powder coat paint (Triglycidyl Isocyanurate (TGIC) or equiva- lent) applied with a minimum thickness of 2 mm. • All seams are sealed with Room Temperature Vulcanization (RTV) sealant or equivalent material on the interior of the cabinet. • All M, P, R, and O size cabinets are sup- plied with a minimum of one removable shelf manufactured from 5052-H32 aluminum. • The shelf is a minimum of 10 inches deep. • The shelf has horizontal slots at the rear and vertical slots at the front of the turned down side flange. • The shelf is held in place by a nylon tie-wrap inserted through holes on the front edge of the shelf and around the front sidewall mounting studs. • The front edge of the upper shelf has holes punched every 6 inches to accommodate tie- wrapping of cable harnesses. • One set (2 rails) of vertical “C” channels are mounted on each interior wall of the 36-inch G and 49-inch M cabinet for the purpose of mounting the cabinet components. There are two sets of vertical rails in the 55-inch P38, 55-inch P44, and the 77-inch R cabinets. The 67-inch O has three rails in its cabinet. The channels accommodate spring mounted nuts or studs. All mounting rails extend to within 7 inches of the top and bottom of the cabinets. Rearwall rail spacing is 18.50 inches center- to-center. • The main door and police door-in-door closes against a weatherproof and dust-proof, closed-cell, neoprene gasket seal. The gas- ket material for the main door is a minimum of 0.250 inch thick by 1 inch wide. The gasket material for the police door is a minimum of 0.250 inch thick by 0.500 inch wide. The gas- kets are permanently bonded to the cabinet. • The lower section of the cabinet is equipped with a louvered air entrance. The air inlet is large enough to allow sufficient airflow per the rated fan capacity. A non-corrosive, vermin, and insect-proof, removable air filter is se- cured to the inlet entrance. Aluminum Traffic Control Cabinets 55 in. P44 Cabinet Cabinet Design & Construction www.econolite.com 16.A.21.d Packet Pg. 825 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) © 2013 Econolite Control Products, Inc. All rights reserved. Econolite Control Products, Inc. reserves the right to change or update these specifications at any time without prior notification An Econolite Group Company 77 in. R Cabinet 67 in. O Cabinet 49 in. M Cabinet P38 Cabinet 36 in. G Cabinet 12.63 Standard Base M 25.00 15.00 332 Base 067 40.625 18.50 Base 55 P44/R77 30.00 18.00 Base P38 • The roof of the cabinet incorporates an exhaust plenum with a vent screen. Perforations in the vent screen will not exceed 0.125 inches in diameter. • The main door on the cabinet is equipped with a three- point latching mechanism. • The handle on the main door is either available in cast aluminum or stainless steel. The main door a size 5, or larger, cabinet utilizes a shank of 5⁄8 inch shank. The handle includes a hasp for the attachment of an optional padlock. The cabinet door handle rotates counter-clock- wise to open. The handle does not exceed beyond the perimeter of the main door at any time. The lock assem- bly is positioned so that the handle cannot cause any interference with the key when opening the cabinet door. • The main door hinge is a one-piece, continuous piano hinge with a stainless steel pin running the entire length of the door. The hinge is attached in such a manner that no rivets or bolts are exposed. • The main door of a size 5, or larger, cabinet includes a mechanism capable of holding the door open at ap- proximately 90°, 125°, and 150° under windy conditions. Manual placement of the mechanism is not required by the field technician. The main door of a size 3 cabinet includes a mechanism capable of holding the door open at approximately 90° and 150° under windy conditions. • The main door is equipped with a Corbin tumbler lock number 1548-1 or exact equivalent. Two keys are sup- plied. • The police door is provided with a treasury type lock Corbin No. R357SGS or exact equivalent and one key. • As an option, anchor bolts can be provided for base- mounted cabinets. The cabinet flange for securing the anchor bolts will not protrude outward from the bottom of the cabinet. When a size 5 cabinet is base-mounted, two anchor bolts are provided. Size 6, 7, and 8 cabinets are provided with four anchor bolts. • Each cabinet is of sufficient size to accommodate all equipment. Size Height Width Depth I.D.I.D.I.D.O.D.O.D.O.D. 3 5 5A 6 6A 7 8 36 in. G 49 in. M 60 in. M 55 in. P44 55 in. P38 77 in. R 67 in. O 39.75 48.75 59.75 54.75 54.75 76.50 66.75 40.00 49.00 60.00 55.00 55.00 76.75 67.00 24.00 28.75 28.75 43.75 37.75 43.75 29.75 24.50 30.25 30.25 44.25 38.25 44.25 30.25 16.00 16.63 16.63 25.75 25.75 25.88 24.50 17.25 16.88 16.88 26.00 26.00 26.00 24.75 Cabinet Design 3360 E. La Palma Ave., Anaheim, CA 92806 Tel: (714) 630-3700 • Fax: (714) 630-6349 E-mail: sales@econolite.com 38203E0707-9 16.A.21.d Packet Pg. 826 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Traffic Cabinet Components and Accesories What, exactly, is a BIU? The Bus Interface Unite (BIU) is a rack module that interfaces 24V logic I/O signals to the Synchronous Data Link Control (SDLC) serial bus of TS2 Type-1 traffic cabinets. The BIU is required in all TS2 Type-1 cabinets and in TS2 Type-2 cabinets when controller I/O interface is through the SDLC bus. BIU About BIU It is required in all TS2 Type-1 cabinets and in TS2 Type-2 cabinets when controller I/O interface is through the SDLC bus, not via TS1 MS-A, B, and C connectors. Physically, the BIU-64 consists of a circuit board and a front panel. A male 64-pin DIN 41612 Type-B series connector provides the connection to the backplane of the rack. A female 15-pin metal shell D subminiature connector with latching blocks provides the connection to the SDLC cable. The front panel provides separate indicator lights for Power, Transmit, and Valid Data. It also provides a handle for easy removal of the unit from the rack. A separate TS2 cabinet power supply provides the required 24 VDC power plus a 60 Hz line-timing reference. 16.A.21.d Packet Pg. 827 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 1250 N. Tustin Avenue, Anaheim, CA 92806 ∙ 714-630-3700 ∙ sales@econolite.com ∙ www.econolite.com © 2019 Econolite. All rights reserved. Econolite reserves the right to change or update these specifications at any time without prior notification. Econolite Traffic Cabinets 385021217-5 BIU Datasheet Hardware The BIU measures 2.34 in. W x 4.50 in. H x 6.60 in. D. Low-profile components are used in order to facilitate an optional half-width front plate unit which measures 1.17 in. x 4.5 in. x 6.60 in. The BIU will slide freely into two rack card-guides having a nominal slot width of 0.075 in. and a maximum slot width of 0.125 in. An aluminum handle is provided on the front panel to allow easy removal of the BIU from the rack. Nominal outer dimensions of the handle shall be 1 in. x 2½ in. The card rack connector on back of the BIU is a male 64-pin DIN 41612 type-B series. The connector is centered at the edge of the circuit board and oriented with Pin 1 located on top. The circuit board edges align with the connector per DIN 41612. The Port-1 SDLC bus connector on the front panel of the BIU is a 15-pin metal shell sub-miniature type with female gold plated contacts. The connector is equipped with latching blocks and mates with a male 15-pin D-type cable connector that is equipped with spring latches (Amp part number 745012-1 or equivalent). The front panel made of 0.090 in. sheet aluminum and is finished with a durable protective coating. Two indicator lamps are provided on the front panel, as specified by the TS2 Standard, for Power and Transmit. In addition, the front panel provides a Valid Data indicator, which lights whenever a Valid Data frame is received. The Power light flashes during absence of Line Frequency Reference (LFR) from the cabinet power supply. The BIU operates with internally generated 60 Hz reference in the absence of the LFR signal. Pin Assignments • Port-1 (SDLC bus) pin assignments shall be as specified in Section 8.6.2.1 of the TS2 Standard: - 1 - Rx Data - 2 - Logic Ground - 3 - Rx Clock + - 4 - Logic Ground - 5 - Tx Data - 6 - Logic Ground - 7 - Tx Clock + - 8 - Logic Ground - 9 - Rx Data - - 10 - Not Used - 11 - Rx Clock - - 12 - Earth Ground - 13 - Tx Data - - 14 - Reserved - 15 - Tx Clock - 16.A.21.d Packet Pg. 828 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Traffic Cabinet Components and Accessories How does a MMU benefit the driving public? Econolite’s MMU offerings monitor up to 16 traffic signal channels, helping ensure proper traffic signal operations, which enhance intersection safety. Why do agencies use a MMU? Econolite’s family of MMUs meet or exceed all specifications, including NEMA, 170/179, and MMU2 where applicable. We have an MMU for virtually any traffic cabinet and controller application, and intersection type. Traffic cabinet monitoring, including event logs and full intersection displays are available. What, exactly, is a MMU? MMU, or Malfunction Management Unit, is used to detect and respond to conflicting or malfunctioning signals and operating voltages. The MMU manages any malfunction affecting traffic signal operations of the traffic cabinet. It is designed to display the real-time status of the intersection, ensuring safe traffic control operations. MMU2-16LE SmartMonitor™ MMU2-16LEip SmartMonitor™ 16.A.21.d Packet Pg. 829 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 1250 N. Tustin Avenue, Anaheim, CA 92806 ∙ 714-630-3700 ∙ sales@econolite.com ∙ www.econolite.com © 2019 Econolite. All rights reserved. Econolite reserves the right to change or update these specifications at any time without prior notification. Econolite Traffic Cabinets 385091016-5 MMU2-16LEiP Datasheet NEMA TS2-2003 (R2008) Standard Including Amendment #4 The MMU2-16LE SmartMonitor meets all specifications of the NEMA Standard TS2-2003 (R2008) for the MMU2 configuration while maintaining compatibility with NEMA TS1-1989 Assemblies. NEMA Standard Flashing Yellow Arrow PPLT Standard MMU2 requirements of TS-2 Amendment #4-2012, providing modes for both TS-2 or TS-1 cabinet configurations. ECcom PC Software Access to the MMU2-16LE data is provided by the industry standard ECcom Windows based software for status, event, log retrieval, configuration, data archival, event logs, and the Help system. RMS Engine A DSP coprocessor converts AC input measurements to true RMS voltages, virtually false sentencing due to changes in frequency, phase, or sine wave distortion. LEDguard® This innovative signal threshold technique can be used to increase the level of monitoring protection when using LED based signal heads. Standardized Communications Real-time SDLC communications with the Controller Unit exchanges field input status, Controller Unit output status, fault status, MMU programming, and time and date. Event Logging A time-stamped nonvolatile event log records the complete intersection status as well as AC line events, configuration changes, monitor resets, temperature, and true RMS voltages. Module Choices • MMU2-16LEip SmartMonitor 12/16 channel LCD Series with Ethernet Port • MMU2-16LE SmartMonitor 12/16 channel LCD Series with EIA-232 Port Setup Wizard Use the built-in setup wizard to configure the NEMA enhanced settings of the SmartMonitor by answering a short series of questions regarding intersection design and operation. Diagnostic Wizard & Help System The diagnostic wizard automatically pinpoints faulty signals and offers trouble-shooting guidance. The integrated help system provides context sensitive operational assistance. Full Intersection & Status Display Two high contrast, large area LCD’s continuously show full RYG(W) intersection status. A separate graphic LCD provides a menu driven user interface to status, signal voltages, configuration, event logs, and the Help system. Program Card Memory Enhanced settings of the MMU2-16LE SmartMonitor are stored in nonvolatile memory on the program card. Moving the program card to another MMU2-16LE automatically transfers all settings. 16.A.21.d Packet Pg. 830 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LMD622t Catalog Sheet – 010411 Designed, Manufactured and Tested in the United States of America ISO 9001:2008 Registered DEFLECTOMETER and Loop Monitor are trademarks of Eberle Design Inc. LEXAN Resin is a trademark of General Electric DEFLECTOMETER® SERIES TWO CHANNEL NEMA TS-2 TYPE C LOOP MONITOR Built-in DEFLECTOMETER® Technology Provides Users With:  Call Strength Indicator for Optimum Sensitivity Programming  One step / One vehicle dynamic Sensitivity programming  Frequency Meter for immediate analysis of loop frequency, avoiding loop cross-talk problems  Push Button Programming Why guess when you can know your detector is optimally programmed and performing for all vehicle classes! ENHANCED FEATURES DEFLECTOMETER Cal l Strength Indictor: The Call Strength Indicator provides the technician with a simple one-step method for accurately setting the optimum level of sensitivity that ensures accurate vehicle detection of all vehicles, including motorcycles and high-bed trucks. NO MORE GUESSING! When a medium size vehicle is over the roadway loop, a DEFLECTOMETER Call Strength value of “5” assures that the optimum sensitivity has been achieved. You can adjust the DEFLECTOMETER reading DYNAMICALLY without moving the vehicle by using the front panel UP or DOWN sensitivity buttons. IT DOES NOT GET ANY EASIER THAN THIS! Frequency Meter: The built-in Frequency Meter reports the operating frequency of the loop network. Ensuring that adjacent loops are separated by at least 5 KHz will avoid crosstalk problems and future service calls. Output CALL Test Mode: The Output Call Test Mode provides a straight forward way to test that the Controller Unit is receiving an active output from the detector. This eliminates the need for cabinet test switches and associated wiring. A huge time saving feature during system set-up and trouble-shooting. Rugged Handle Assembly: The rugged handle assembly is made of GE LEXAN, which is a super durable polycarbonate resin. The design of this assembly strengthens and protects the whole PCB assembly much better than conventional face plates. The temperature stability of critical components is improved with the more encompassing enclosure. Quick reference instructions are conveniently attached directly on the side of the unit, eliminating the need for cards. Advanced Loop Diagnostics: The Fault (FLT) indicator displays the type of fault: Short, Open or 25% change of inductance. The Fault Monitor will report and store three types of loop faults; Open Loops, Shorted Loops, and 25% sudden changes in inductance. Each type of fault is indicated by a unique sequence of flashes allowing the user to diagnose loop failures at a glance. Delay and Extension Timing: Delay and Extension timing functions are provided. STANDARD FEATURES  Delay & Extension Timing  Automatic Tuning  Lightning & Surge Protection  Four (4) Frequency Levels  Fail Safe Output Configuration  Separate Color-Coded LED indicators  Wide Loop Inductance Range: 20 to 2500 microHenries. U.S. Pat. No. 7,855,893 16.A.21.d Packet Pg. 831 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LMD622t DEFLECTOMETER SERIES TWO CHANNEL INDUCTIVE LOOP VEHICLE DETECTOR SPECIFICATIONS General Characteristics Controls: Front panel push buttons allow the user to set the Sensitivity Level, Operational mode, and nominal Frequency independently on each channel. PCB mounted DIP switches allow the user to set the Delay and Extension timers. Setting Sensitivity - Front Panel Push Buttons The DEFLECTOMETER (front panel 7-segment LED) aids in setting the DETECTOR quickly and easily to the most optimum sensitivity level to ensure the trouble-free detection of all vehicles, including motorcycles and high bed vehicles. For typical vehicles (mid -size vehicle / small pick up) utilizing properly installed roadway loops, a Call Strength of 5 displayed on the DEFLECTOMETER during the DETECT output period indicates an optimum sensitivity setting. For high profile vehicles (commercial trucks, 4x4’s, etc…), a Call Strength value of 4 will be optimum. For low profile vehicles (sports cars, etc…), a Call Strength value of 6 will be optimum. Adjusting sensitivity using the DEFLECTOMETER (recommended): The DEFLECTOMETER should read zero (0) with no vehicle over the roadway loop. When a typical mid-sized vehicle is completely in the detection zone (DET indicator On), the Call Strength value should be adjusted up or down until the DEFLECTOMETER displays the desired optimum value of 5 (or 4 or 6 as described above). If a typical vehicle located over the roadway loop causes the Call Strength “7” to be displayed on the DEFLECTOMETER, the sensitivity should be decreased two levels. This can be done by pressing the front panel SENS button two times to achieve the Call Strength value of 5. If a typical vehicle located over the roadway loop causes the number “2” to be displayed on the DEFLECTOMETER, the sensitivity should be increased three levels. This can be done by pressing the front panel SENS button three times to achieve the Call Strength value of 5. NOTE: THE DEFLECTOMETER CALL STRENGTH DYNAMICALLY UPDATES AFTER EACH SENSITIVITY LEVEL CHANGE, ALLOWING YOU TO CHANGE SENSITIVITY SETTINGS WHILE A VEHICLE REMAINS IN THE LOOP DETECTION ZONE. Adjusting sensitivity without using the DEFLECTOMETER (manually setting sensitivity): The DETECTOR offers 9 levels of sensitivity (1 to 9). Level 9 is the highest sensitivity. Sensitivity Level can be manually set to any desired value by pressing the front panel SENS buttons ( or) when a vehicle is NOT over the roadway loop (DET indicator Off). The first time a SENS button ( or) is pressed, the current Sensitivity Level is displa yed on the DEFLECTOMETER for 3 seconds. If either SENS button ( or) is pressed again before the 3 second period ends, the Sensitivity Level will increase (SENS ) or decrease (SENS ). The new Sensitivity Level value will be displayed on the DEFLECTOMETER display for 3 seconds. The factory default Sensitivity setting is level 6. Sensitivity ∆L / L Sensitivity ∆L / L 9 0.01% 4 0.32% 8 0.02% 3 0.64% 7 0.04% 2 1.28% 6 0.08% 1 2.56% 5 0.16% - - Loop Frequency / Loop Frequency Display: One of four frequency settings may be selected via the front panel FREQ push button to alleviate interference which may occur when loops connected to different detectors are located adjacent to one another. To help prevent or diagnose crosstalk problems, the loop frequency is displayed on the front panel DEFLECTOMETER. The current loop frequency is displayed after pressing the FREQ button to display the current Frequency Level. The frequency is shown in KHz with a “-“ symbol displayed both before and after the numeric digits shown on the DEFLECTOMETER. For example, after pressing the FREQ button once the display sequence might show: “3”  “-“  “2”  “7”  “-“ This sequence would indicate Frequency Level “3” and a loop reference frequency of 27 KHz. Detectors on adjacent loops should all be separated by at least 5 KHz. Loop Fault Monitoring: The Detector continuously checks the integrity of the loop. The system is able to detect shorted or open circuit loops, or sudden changes in inductance exceeding 25% of the nominal inductance. If a fault is detected, the OUT and FLT indicators continuously emit a sequence of flashes. Additionally, the DEFLECTOMETER displays the letter “F” indicating a current loop fault. Each type of fault is identified by a unique flash sequence: Flash Sequence Fault 1 flash Open Circuit Loop. 2 flashes Shorted Circuit Loop. 3 flashes 25% excessive change in inductance. If the Open or Shorted fault condition self heals, the DET indicator and DEFLECTOMETER will return to normal operation. The FLT indicator will continue to flash with the sequence signifying the type of fault that was last detected. In the case of the excessive inductance change fault, the unit will retune to the new inductance after a period of two seconds and continue operation. The fault condition will be indicated by the flash sequence of the FLT indicator. Operational Modes Presence: For each channel, a Presence output mode may be selected from the front panel MODE push button. If presence mode is selected then a choice of short (S) or long (L) can be selected. Short Presence is defined as 30 minutes and Long Presence is defined as 120 minutes. Pulse: For each channel, a Pulse output mode (P) may be selected from the front panel MODE push button. In Pulse mode, a 125 ms ± 25ms width pulse will be output for each vehicle entering the loop. Call: For each channel, a continuous CALL output (C) may be selected from the front panel MODE push button which will simulate the presence of a vehicle. This mode is used for testing the CALL output of a channel. Channel Off: For each channel, the Channel Off (-) may be selected from the front panel Mode push button. This option turns OFF the channel and disables the oscillator. An additional option allows the Status Output to be turned ON while the channel is OFF. Selectable Options: Call Delay Timer for Presence & Pulse Modes: For each channel, a delay time of 1 to 63 seconds may be selected by setting the appropriate PCB mounted DIP switches to the ON position. Call Delay time starts counting down when a vehicle enters the loop detection area. During the Delay time the DET indicator will flash two times per second and the DEFLECTOMETER will display the letter “d”. Delay time can be overridden by a True (low) signal at the Timer Control input. Call Extension Timer for Presence Mode: For each channel, an extend time of 0.25 to 15.75 seconds can be set via the EXTEND DIP switches. The numeric sum of the switches in the On position is equal to the Extend time. Two modes are provided: Extend Always (default): Call Extend time starts counting down when the last vehicle clears the loop detection zone. During the Extend time the DET indicator will flash four times per second and the DEFLECTOMETER will display the letter “E”. Any vehicle entering the loop detection zone during the Extend time period causes the Extend timer to be reset and the output maintained. The Timer Control input has no effect on this mode. Extend on Green (EOG) Call Extend time starts counting down when the last vehicle clears the loop detection zone if the Timer Control input is True (low). During the Extend time the DET indicator will flash four times per second and the DEFLECTOMETER will display the letter “E”. Any vehicle entering the loop detection zone during the Extend time period causes the Extend timer to be reset and the output maintained. The Extend on Green mode is enabled by a factory installed diode located at OPT6 on the pcb. Consult the factory for details. Timer Control Inputs: Timer Control inputs are provided for each channel to modify the operation of the Delay and Extension functions. The application of a True (low) state voltage will inhibit the Delay timing function and/or enable the Extend timing function. Timer Control inputs are primarily provided for downward compatibility. Pin Assignment: PIN FUNCTIONS PIN FUNCTIONS A Logic Ground 1 Ch 1 Timer Control Input B DC Supply 2 Ch 2 Timer Control Input C External Reset 3 No Connection D Ch 1 Loop Input 4 Ch 1 Redundant Loop Input E Ch 1 Loop Input 5 Ch 1 Redundant Loop Input F Ch 1 Output (+) 6 No Connection H Ch 1 Output (-) 7 Ch 1 Status Output J Ch 2 Loop Input 8 Ch 2 Redundant Loop Input K Ch 2 Loop Input 9 Ch 2 Redundant Loop Input L Chassis Ground 10 No Connection M No Connection 11 No Connection N No Connection 12 No Connection P No Connection 13 No Connection R No Connection 14 No Connection S No Connection 15 No Connection T No Connection 16 No Connection U No Connection 17 No Connection V No Connection 18 No Connection W Ch 2 Output (+) 19 No Connection X Ch 2 Output (-) 20 Ch 2 Status Output Y No Connection 21 No Connection Z No Connection 22 No Connection DC Supply Voltage: Minimum .......................................................................... 10.8 Vdc Maximum ......................................................................... 28.8 Vdc DC Supply Current: Maximum ........................................................................... 100 mA DC Timer Control Inputs: True (low) .............................................................. Less than 8 Vdc False (high) ..................................................... Greater than 16 Vdc Optically Isolated Outputs: True (low, 50 mA) .............................................. Less than 1.5 Vdc Maximum Current ............................................................... 100 mA Outputs are fail-safe such that a Detector with no power will provide the True (low) Call state. Relay Outputs: AC Contact Rating ................................................... 5A @ 120 Vac DC Contact Rating .................................................... 5A @ 30 Vdc Environmental: Operating Temperature Range: -30oF to 165oF (-34oC to 74oC) Mechanical: International Card 4.500”H (114.30mm) x 6.875”D (174.63mm) x 1.14”W (28.96mm), excluding handle, with 44 pin double sided edge connector. Status Outputs: Each channel includes a separate output which is used to transmit operational status information to a bus interface unit (BIU). Fault information is transmitted by means of pulse-width modulation. Pulse widths shown are +10ms. Status Status Output Condition Normal operation / No fault .................................................................. Continuous ON (low) Watchdog fail / Power Supply fail ...................................................... Continuous OFF (high) Open circuit loop ................................................................................ 50ms OFF, 50ms ON Short circuit loop .............................................................................. 100ms OFF, 50ms ON 25% change in inductance................................................................ 150ms OFF, 50ms ON 16.A.21.d Packet Pg. 832 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) C-1000 SERIES TWO CHANNEL RACK MOUNT DETECTOR Overview: The Model C-1000 series consists of detectors designed to meet or exceed NEMAStandards TS 2-1992 for Type C detectors. These units are downward compatible to NEMA Standards TS 1-1989. In addition, the Model C- 1000 series includes versions that are designed for use in Type 332 / 170 applications. The C-1000 detector is a two channel, card rack type loop detector with individual channel detect and loop fail indications provided via two high intensity red LEDs and an easy to read LCD screen. All detector settings and parameters are configured using a set of four pushbuttons and the LCD screen. The C-1000 offers advanced features providing built-in diagnostic capabilities all of which are viewable by means of the LCD screen. These include: 1.) real- time loop frequency, 2.) loop inductance and -∆L/L%, 3.) a bargraph indication of relative inductance change (which ensures proper selection of sensitivity level), 4.) a record of accumulated loop failures, and 5.) a timer countdown of programmed timing functions. Manufactured under Patent #’s 5,936,551 6,087,964 and 6,281,809. - Other Patents Pending. Back-lit LCD screen displays complete detector status and function settings: Eliminates guess work and provides critical information necessary for proper detector setup. Provides accurate, direct visual feedback of channel frequency and sensitivity settings. Allows easy access to built-in detector diagnostic features. TrueCount versions provide 97% to 99% count accuracy when used with either a single long loop or multiple 6’ x 6’ loops connected together. Audible detect signal (buzzer) facilitates loop and / or detector troubleshooting. Upgrades or addition of user specific options are easily accomplished by changing the socket mounted processor. Push button programming ensures long term reliability by eliminating switch contacts. All programmed detector parameters are stored in non-volatile memory. Directional logic capability. Reno A & E 4655 Aircenter Circle • Reno, Nevada • 89502 • USA Tel: (775) 826-2020 • Fax: (775) 826-9191 • E-mail: sales@renoae.com • Internet: www.renoae.com See page 4 for submittal details 16.A.21.d Packet Pg. 833 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Option 2, Loop Inductance -∆∆L/L Display:When this option is enabled (on), the LCD screen displays the percentage of inductance change (-∆L/L value) during the Call state. To facilitate viewing of the maximum change in the -∆L/L value while traffic is in motion over the detection zone, the detector will hold the peak -∆L/L value for a period of 2 seconds. NOTE: Enabling this option activates it for both channels. This option is automatically disabled 15 minutes after activation or on loss of power. Option 3, Call Extension Control:When this option is enabled (on), the channel will extend calls for the programmed extension time only when the Phase Green Input signal (pin 1 or 2) is active for the channel. When this option is off, the channel extends ALL calls for the programmed extension time. The signals on pins 1 and 2 are also called Call Delay Overrides. NOTE: Each channel can be enabled independently. Option 4, Noise Filter Disable:When Option 4 is enabled (on), internal noise filtering is disabled thus providing a faster response time. When this option is off, internal noise filtering is utilized. When the detector is used in speed and/or occupancy applications, the noise filter should be disabled (i.e. Option 4 on) to provide the most accurate data possible. It is recommended that this option not be activated. The factory default setting of “Off” provides stable operation in high crosstalk environments. NOTE: Enabling this option activates it for both channels. Changing the setting of this feature will reset the detector. See “SENSITIVITY, -∆L/L, & RESPONSE TIME” table. Option 5, Phase Green Loop Compensation:When Option 5 is enabled (on), normal loop compensation is used until the Phase Green Input signal (pin 1 or 2) becomes active. Once the Phase Green Input signal is active, concurrent with a call output, the detector desensitizes the loop by 0.05% (-∆L/L) over a 15 second period. This desensitization “tunes out” small changes, such as adjacent lane pickup, therefore minimizing the chance of max timing an empty lane. A small motorcycle may also be tuned out following the start of Phase Green. This option is useful in minimizing the effects of false detection from adjacent lane pickup when a channel must be run with a high sensitivity setting to ensure detection of motorcycles. When Option 5 is not enabled (off), normal loop compensation is used. NOTE: Each channel can be enabled independently. Option 6.0, Vehicle Counting Display (TrueCount Models - See “Model Numbers” Table): When Option 6.0 is enabled (on) for a channel, the normal operating display is replaced with the accumulated vehicle count display. Each channel is capable of accumulating 65,535 counts before rolling over to 0. The LCD display will show just the hundreds, tens, and ones digits until the accumulated count exceeds 999. At this point the LCD display will alternate between the ten thousands and thousands digits and the remaining three digits for hundreds, tens, and ones. Option 6.1, Counter Reset:This setting is used to reset the accumulated count for the selected channel. When Option 6.1 is changed from the off state to the on state, the accumulated count for the selected channel is reset to zero. Option 6.1 will always be in the off state when first viewed. Option 7.00, Vehicle Counting Loop Configuration (TrueCount Models - See “Model Numbers” Table):Each channel’s Vehicle Counting Loop Configuration setting can be set from 7.01 to 7.05. This setting indicates the number of loops installed in a single lane. Option 7.01 would indicate a single 6' x 6' loop or a long loop such as a 6' x 50' Quadrupole™. The remaining four settings indicate the number of 6' x 6' loops installed in a single lane of traffic. NOTE: Refer to the Model C-1000 Series Operation Manual for complete installation and operation details. Option 8, Common Fail Output (Fail Output Models Only - See “Model Numbers” Table): When Option 8 is enabled (on), a failure on either detector channel will cause both of the detector fail outputs (pins 6 and 19) to activate. This feature is useful in situations where independent failure monitoring of each channel is not needed (or possible). One fail output from each detector in the rack can be wired together, thus providing a single fail output for the entire rack. Option 9, Third Car Passage:Option 9 is a “paired channel” option. This means that it takes two channels to implement this feature. When Option 9 is enabled (on), the outputs of the paired channels 1 and 2 are logically ANDed together. This means that while the loops for both of the paired channels are occupied, a call will appear on both channels. While only one loop is occupied, or neither loop is occupied, a call will not appear on either channel. The first channel with detection will enter a “pending” state while waiting for detection on the other paired channel. While in the pending state, the LCD will show “Pnd” on the display. The intent of this feature is for use in Protected / Permissive left turns. The expected installation is a stop bar loop for the left turn lane connected to one channel, a queue detection loop for the left turn lane connected to the other channel with a small amount of delay time programmed, and the output of either channel connected to the Vehicle Call input for the protected movement of the traffic controller. NOTE: Refer to the Model C-1000 Series Operation Manual for complete installation and operation details. Option 10, Directional Logic:Option 10 is a “paired channel” option. This means that it takes two channels to implement this feature. When Option 10 is enabled (on), directional logic is enabled. Directional logic starts with a detection on one of the paired channels. This channel will go into the “pending” state, display “Pnd” on the LCD screen, and NOT output a call. When both of the paired channels have detection, the last channel to have detection will output a Call until the detection for the last channel ends, even if the detection ends for the first channel. None of the timing functions (Delay, Extension, Max Presence, or Detector Disconnect) of the first channel with a detection will time and the first channel will always operate in the Presence Mode regardless of programming for the channel. The second channel with a detection will time all timing functions Please refer to the Model C Series Archives on our Website for details on features offered on earlier versions of the Model C 1000. C-1000 SERIES SPECIFICATION This is a basic performance specification and is not intended to be used as operating instructions. GENERAL CHARACTERISTICS: Loop Frequency:The LCD screen displays the actual loop operating frequency for each channel. This makes it easy to quickly identify and eliminate crosstalk in the most difficult to configure intersections. There are eight (8) selectable loop frequency settings per channel (normally in the range of 20 to 100 kilohertz). The actual loop operating frequency is a function of the loop / lead- in network and the components of the loop oscillator circuit. Sensitivity:A unique bar graph displayed on the LCD makes it easy to quickly set sensitivity at the ideal level for any loop / lead-in network situation. There are nine (9) selectable sensitivity levels per channel, plus settings for Continuous-Call and Channel-Off. See “SENSITIVITY, -∆L/L, & RESPONSE TIME” table. Continuous-Call:When set to the Continuous-Call state, the channel output is continuously in the Call state regardless of the presence or absence of vehicles over the loop. The loop oscillator is disabled when in the Continuous-Call state. This state is indicated by “CALL” flashing on the LCD. This option is selected from the Sensitivity menu in Program Mode and is useful for checking controller response and other troubleshooting activities. Channel-Off:When set to the Channel-Off state, the channel output is continuously in the No-Call state regardless of the presence or absence of vehicles over the loop. The loop oscillator is disabled when in the Channel-Off state. This state is indicated by “OFF” flashing on the LCD. This option is selected from the Sensitivity menu in Program Mode and is useful for checking controller response and other troubleshooting activities. Call Delay:Each channel’s Call Delay is adjustable from 0 to 255 seconds in 1-second steps. Call Delay time begins when a vehicle enters the loop detection zone. The remaining Call Delay time is continuously displayed on the LCD. Whenever a Phase Green Input (call delay override) signal (pin 1 or 2) is active (low state), the Call Delay function for that channel is aborted and the Call Delay time is forced to zero. Call Extension:Each channel’s Call Extension is adjustable from 0 to 25.5 seconds in 0.1-second steps. Extension time begins when the last vehicle clears the loop detection zone. The remaining Extension time is continuously displayed on the LCD. Any vehicle entering the loop detection zone during the Extension time returns the channel to the Detect state, and later, when the last vehicle clears the loop detection zone, the full Extension time starts counting down again. NOTE: See Option 3, Call Extension Control for an alternate mode of operation for Call Extension. Presence / Pulse:One of two mutually exclusive modes of operation for each channel can be selected in Program Mode: Presence Mode:Provides a minimum Call hold time of 4 minutes (regardless of vehicle size) and typically 1 to 3 hours for an automobile or truck. Pulse Mode:A single output Pulse of 125 ±10 milliseconds duration is generated for each vehicle entering the loop detection zone. Each detected vehicle is instantly tuned out if it remains in the loop detection zone longer than 2 seconds. This enables detection of subsequent vehicles entering the loop detection zone. After each vehicle leaves the loop detection zone, the channel resumes full sensitivity within 0.5 seconds. Max Presence Timer:Each channel’s Max Presence timer is adjustable from 1 to 999 seconds in 1-second steps, plus OFF. The Max Presence function is used to limit presence time by automatically resetting a channel. If this function is enabled (on), the Max Presence timer begins counting down when a Call is initiated and the remaining time is continuously displayed on the LCD. If the loop becomes vacant before the Max Presence timer reaches zero, the Call is dropped and no automatic reset occurs. If the End-Of-Green (EOG) function is not enabled (off) and the Call is still present when the Max Presence timer reaches zero, the channel is then automatically reset. If the EOG function is enabled (on) and the Call is still present when the Max Presence timer reaches zero, the channel enters a Wait state. The Wait state continues until the loop becomes vacant; or the Phase Green Input signal for the channel (pin 1 or 2) transitions from green to not green with the Call still present. If the loop becomes vacant first, the Call is dropped and no automatic reset occurs. If the Phase Green Input for the channel transitions from green to not green while the channel is in a Wait state, the channel is automatically reset. The phase green signals on pins 1 and 2 are also called Call Delay Overrides. End-Of-Green (EOG):The EOG function is used to synchronize a channel reset with the termination of the associated phase green. The EOG function is only available when the Max Presence function is set between 1 and 999 seconds. It is not available when the Max Presence function is OFF. When the EOG function is enabled (on), the channel will automatically reset at the time the phase green input signal (pin 1 or 2) transitions from the ON state to the OFF state if the Max Presence Time has counted down to zero and is resting in the Wait state. The phase green signals on pins 1 and 2 are also called Call Delay Overrides. If an out of range loop failure condition exists and is identified (i.e. loop inductance is less than 20 microhenries or greater than 2500 microhenries) the detector channel will not be reset at End-of Green and the channel will remain in the failed state. Option 1, Loop Inductance Display:When this option is enabled (on), the LCD screen displays the total loop inductance (actual loop inductance plus actual lead-in inductance) in microhenries for loop inductance values in the range of 20 to 2500 microhenries. NOTE: Enabling this option activates it for both channels. This option is automatically disabled 15 minutes after activation or on loss of power. 16.A.21.d Packet Pg. 834 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) C-1000 SERIES SPECIFICATION as programmed. The intent of this feature is for use in parking lot applications where vehicles can enter or exit from the same lane, freeway ramps for wrong way detection, and left turn lanes where other movements in the intersection tend to clip the detection zone of the left turn. The expected installation is two loops, one after the other in the same lane, spaced anywhere from slightly overlapping to 6 feet apart. NOTE: Refer to the Model C-1000 Series Operation Manual for complete installation and operation details. Option 11, Audible Detect Signal:When this option is enabled (on), an audible signal will be activated whenever the detection zone for the selected channel is occupied. The audible signal indicates actual occupancy of the loop detection zone. Timing and disconnect functions have no affect on the audible signal. This feature allows a technician to watch the detection zone on the street and confirm correct detector operation without having to look at the detector display as well. Only one channel can have this feature active at a given time. Turning this option on for one channel automatically turns it off for the other channel. NOTE: This option is automatically disabled 15 minutes after activation or on loss of power. Option 12.0, Detector Disconnect:The Detector Disconnect feature requires that the Phase Green Inputs for each channel be connected to the proper controller phase. When the Phase Green Input is not active (high), the detector shall operate normally. When the Phase Green Input is active (low), at the end of each detection, the extension timer will start to count down. If this timer reaches zero before the next detection, this channel will no longer output a Call until the phase green input is not active. Because the extension timer is used as a disconnect timer while in this mode, two different disconnect types are available: Option 12.1 OFF:Extension timing occurs and the extension timer also serves as the disconnect timer during phase green. This will cause the Call output to remain in the Call state until disconnect occurs. This may allow the user to use gap times appropriate for the advanced loops without considering the effects on the stop bar loops. Option 12.1 ON:Extension timing is disabled and the extension timer is used as the disconnect timer. This will cause the Call output to follow the occupancy of the loop detection zone until disconnect occurs. The intent of this feature is for use in applications where a loop at the stop bar is not needed after any waiting queue in the associated traffic lane is moving during the green. Note: Refer to the Model C-1000 Series Operation Manual for complete installation and operation details. SPECIFICATIONS (PHYSICAL): Weight:6 oz (170 gm). Size:4.50 inches (11.43 cm) high x 1.12 inches (2.84 cm) wide x 6.875 inches (17.46 cm) deep (including connector, excluding handle). Handle adds 1.00 inch (2.54 cm) to depth measurement. Operating Temperature:-40°F to +180°F (-40°C to +82°C). Circuit Board:Printed circuit boards are 0.062 inch thick FR4 material with 2 oz. copper on both sides and plated through holes. Circuit boards and components are conformal coated with polyurethane. Connector:2 x 22 contact edge card connector with 0.156 inch (0.396 cm.) contact centers. Key slots located between pins B / 2 & C / 3, E / 5 & F / 6, and M / 11 & N / 12. See “PIN ASSIGNMENTS” table. Loop Feeder Length:Up to 5000 feet (1500 m) maximum with proper feeder cable and appropriate loops. SPECIFICATIONS (ELECTRICAL): Power:10.8 to 30 VDC, 120 mA maximum, 1.8 Watts maximum. Loop Inductance Range:20 to 2500 microhenries with a Q factor of 5 or greater. Loop Inputs:Transformer isolated. The minimum capacitance added by the detector is 0.068 microfarads. Lightning Protection:The detector can tolerate, without damage, a 10 microfarad capacitor charged to 2,000 volts being discharged directly into the loop input terminals, or a 10 microfarad capacitor charged to 2,000 volts being discharged between either loop terminal and earth ground. Reset: Meets and/or exceeds NEMATS 1 and TS 2 detector specifications. Application of a 30- millisecond low state (0 to 8 VDC) to pin C resets all channels. The detector can also be reset by removing and reapplying power or by changing the setting of Option 4 (Noise Filter Disable). Each detector channel can be independently reset by pressing the CHAN button until the desired channel is selected, then holding the CHAN button for 3 seconds. Also, changing either the sensitivity or loop frequency of a channel will reset that channel. NOTE: Resetting a channel or changing the setting of Option 4 does not disable any selectable diagnostic functions. If any diagnostic option(s) (Option 1, Option 2, or Option 11) has (have) been activated, it (they) will remain activated following the channel reset or change of Option 4 setting. Resetting the detector by applying a 30-millisecond low state to pin C or removing and reapplying power disables all selectable diagnostic features. Phase Green Inputs:Also known as Call Delay Overrides. Meets and/or exceeds all NEMATS 1 and TS 2 requirements. Application of a low state voltage (0 to 8 VDC) to pin 1 (Ch. 1) and/or pin 2 (Ch. 2) causes the delay timer for the channel to abort the delay timing function and also provides control for Phase Green Loop Compensation, Max Presence Timing (End-of-Green), Extension Timing, and Detector Disconnect, if the features are programmed. When used in racks without phase green inputs, the Model 1000 Series has a RJ-11 connector (6 conductors) mounted on the circuit board for the phase green inputs (pin 1 – Ch. 2 and pin 2 – Ch. 1). See “Modular Jack Pin Outs - Modular Jack (RJ-11) on PC Board”table. Fail-Safe Outputs:Per NEMATS 2, a conducting state indicates detection output. Each detector channel output defaults to a Call state for any loop failure condition or loss of power. Channel Status Outputs:Per NEMA TS 2, each channel has an output to communicate the status states of the channel as follows: Normal operation . . . . . . . . . . . . . . . . . . . . . . .Continuous Low or On State. Detector failure . . . . . . . . . . . . . . . . . . . . . . . . .Continuous High or Off State. Open loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ms On time, 50 ms Off time. Shorted loop . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ms On time, 100 ms Off time. Excessive inductance change (±25%) . . . . . .50 ms On time, 150 ms Off time. Relay Ratings:The relay contacts are rated for 6 Amps maximum, 150 VDC maximum, and 180 Watts maximum switched power. Solid State Output Ratings:Optically coupled field effect transistors. 30 VDC maximum drain to source. 50 mAmaximum current. 1.2 VDC maximum transistor saturation voltage. The output transistor is protected with a 33-volt zener diode connected between the drain and source. SPECIFICATIONS (OPERATIONAL): Display:The LCD backlighting illuminates whenever any pushbutton is pressed. The backlighting will extinguish 15 minutes after the last actuation of any pushbutton. Detect Indicators:Each channel has a super-high-intensity, red, light-emitting-diode (LED) to indicate a Call output, Delay Timing, Extension Timing, Pending state, or failed loop. Response Time:Meets or exceeds NEMA TS 1 and TS 2 response time specifications. See “SENSITIVITY, -∆L/L, & RESPONSE TIME” table for actual response times. Self-Tuning:The detector automatically tunes and is operational within 2 seconds after application of power or after being reset. Full sensitivity and hold time require 30 seconds of operation. Environmental & Tracking:The detector is fully self-compensating for environmental changes and loop drift over the full temperature range and the entire loop inductance range. Grounded Loop Operation:The loop isolation transformer allows operation with poor quality loops (which may include one short to ground at a single point). Loop (Fail) Monitor:If the total inductance of the channel’s loop input network goes out of the range specified for the detector, or rapidly changes by more than ±25%, the channel will immediately enter the Fail-Safe mode and display “LOOP FAIL” on the LCD screen. The type of loop failure will also be displayed as “L lo” (for -25% change or shorted loop conditions) or “L hi” (for +25% change or open loop conditions). This will continue as long as the loop fault exists. However, if the detector is reset, or power is momentarily lost, the detector will retune if the loop inductance is within the acceptable range. If any type of loop failure occurs in one (or more) loop(s) in a group of two or more loops wired in parallel, the detector will not respond with a fail-safe output following any type of reset. It is essential that multiple loops wired to a common detector channel always be wired in series to ensure fail-safe operation under all circumstances.The Fail-Safe mode generates a continuous call in Presence Mode or in Pulse Mode. At the time of a loop failure, the channel’s LED will begin repeating a burst of three flashes each one second. The LED will continue these bursts until the channel is manually reset or power is removed. If the loop “self heals”, the “LOOP FAIL” message on the LCD will extinguish and the channel will resume operation in a normal manner; except the LED will continue the bursts thus providing an alert that a Loop Fail condition occurred. Each loop failure for the channel is counted and accumulated into the Loop Fail Memory. The total number of loop failures written into the Loop Fail Memory (since the last power interruption or manual reset) is viewed by stepping through the channel’s functions in Program Mode to the “LOOP FAIL” message. Full Restore To Factory Defaults:Pressing all four front panel switches simultaneously and continuously for 5 seconds resets the detector and restores all the factory default settings. The countdown of the 5-second period is displayed on the LCD screen. Releasing any of the switches before the countdown ends will abort the Full Restore operation. See “FACTORY DEFAULT SETTINGS” table. Display Test:Pressing any two of the front panel switches simultaneously will display all possible symbols and messages on the LCD screen. Please refer to the Model C Series Archives on our Website for details on features offered on earlier versions of the Model C 1000. 16.A.21.d Packet Pg. 835 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Pin Function Pin Function C-1000 SERIES SPECIFICATION Pin Function Pin Function Function Channel 1 Channel 2 Sensitivity -∆∆L/L Response Time Noise Filter Enabled (Option 4 Off) Response Time Noise Filter Disabled (Option 4 On) Distributed by: TABLES Pin Function Pin Function Pin Function Pin Function Model Description A DC (-) Common 1 No Connection B DC (+) Power 2 No Connection C Reset Input 3 No Connection D Channel 1 Loop Input 4 Channel 1 Loop Input E Channel 1 Loop Input 5 Channel 1 Loop Input F Channel 1 Output, Normally Open / Drain 6 No Connection H Channel 1 Output, Common / Source 7 No Connection J Channel 2 Loop Input 8 Channel 2 Loop Input K Channel 2 Loop Input 9 Channel 2 Loop Input L Chassis Ground 10 No Connection M No Connection 11 No Connection N No Connection 12 No Connection Frequency 3 7 Sensitivity 6 6 Delay Time 0 0 Extension Time 0 0 Max Presence Time OFF OFF Presence / Pulse Mode Presence Presence End-Of-Green (EOG)OFF OFF Option 1 - Loop Inductance Display OFF OFF Option 2 - Loop Inductance -∆∆L/L Display OFF OFF Option 3 - Call Extension Control OFF OFF Option 4 - Noise Filter Disable OFF OFF Option 5 - Phase Green Loop Compensation OFF OFF Option 6.0 - Vehicle Counting Display OFF OFF Option 6.1 - Counter Reset OFF OFF Option 7 - Vehicle Counting Loop Configuration 04 04 Option 8 - Common Fail Output OFF OFF Option 9 - Third Car Passage OFF OFF Option 10 - Directional Logic OFF OFF Option 11 - Audible Detect Signal OFF OFF Option 12.0 - Detector Disconnect OFF OFF Option 12.1 - Detector Disconnect Type OFF OFF 1 Channel 2 Phase Green Input 4 Channel 1 Fail Output 2 Channel 1 Phase Green Input 5 Logic Ground 3 Channel 2 TrueCount Output 6 Channel 1 TrueCount Output C-1100-R 332 / 170 Type, Relay Outputs C-1100-SS 332 / 170 Type, Solid State Outputs C-1101-R 332 / 170 Type, Relay Outputs with TrueCount Outputs C-1101-SS 332 / 170 Type, Solid State Outputs with TrueCount Outputs C-1102-R 332 / 170 Type, Relay Outputs with Fail Outputs C-1102-SS 332 / 170 Type, Solid State Outputs with Fail Outputs C-1103-R 332 / 170 Type, Relay Outputs with TrueCount and Fail Outputs C-1103-SS 332 / 170 Type, Solid State Outputs with TrueCount and Fail Outputs C-1200-R TS 1 / TS 2 Type, Relay Outputs C-1200-SS TS 1 / TS 2 Type, Solid State Outputs C-1201-R TS 1 / TS 2 Type, Relay Outputs with TrueCount Outputs C-1201-SS TS 1 / TS 2 Type, Solid State Outputs with TrueCount Outputs C-1202-R TS 1 / TS 2 Type, Relay Outputs with Fail Outputs C-1202-SS TS 1 / TS 2 Type, Solid State Outputs with Fail Outputs C-1203-R TS 1 / TS 2 Type, Relay Outputs with TrueCount and Fail Outputs C-1203-SS TS 1 / TS 2 Type, Solid State Outputs with TrueCount and Fail Outputs P No Connection 13 No Connection R No Connection 14 No Connection S No Connection 15 No Connection T No Connection 16 No Connection U No Connection 17 No Connection V No Connection 18 No Connection W Channel 2 Output, Normally Open / Drain 19 No Connection X Channel 2 Output, Common / Source 20 No Connection Y No Connection 21 No Connection Z No Connection 22 No Connection A DC (-) Common 1 Channel 1 Phase Green Input B DC (+) Power 2 Channel 2 Phase Green Input C Reset Input 3 No Connection D Channel 1 Loop Input 4 Channel 1 Loop Input E Channel 1 Loop Input 5 Channel 1 Loop Input F Channel 1 Output, Normally Open / Drain 6 Channel 1 Fail Output H Channel 1 Output, Common / Source 7 Channel 1 TS 2 Status Output J Channel 2 Loop Input 8 Channel 2 Loop Input K Channel 2 Loop Input 9 Channel 2 Loop Input L Chassis Ground 10 No Connection M No Connection 11 No Connection N No Connection 12 No Connection P No Connection 13 No Connection R No Connection 14 No Connection S Channel 1 TrueCount Output 15 No Connection T No Connection 16 No Connection U No Connection 17 No Connection V No Connection 18 No Connection W Channel 2 Output, Normally Open / Drain 19 Channel 2 Fail Output X Channel 2 Output, Common / Source 20 Channel 2 TS 2 Status Output Y Channel 2 TrueCount Output 21 No Connection Z No Connection 22 No Connection SENSITIVITY, -∆L/L, & RESPONSE TIME: OFF ------------------------ 1 0.64%133 ±27 milliseconds 20 ±4 milliseconds 2 0.32%133 ±27 milliseconds 20 ±4 milliseconds 3 0.16%133 ±27 milliseconds 20 ±4 milliseconds 4 0.08%133 ±27 milliseconds 20 ±4 milliseconds 5 0.04%133 ±27 milliseconds 20 ±4 milliseconds 6*0.02%133 ±27 milliseconds 27 ±5 milliseconds 7 0.01%133 ±27 milliseconds 42 ±8 milliseconds 8 0.005%133 ±27 milliseconds 72 ±14 milliseconds 9 0.0025%133 ±27 milliseconds 133 ±27 milliseconds CALL ------------------------ * Denotes factory default. Note:Entries in this table are based on the assumption that both detector channels are set to the same sensitivity. To achieve the exact response times listed above, the Sensitivity level of both channels must be set the same. To approximate response times for a detector with channels set to different sensitivities, look up the response time for each channel and divide it by two, then add these times together. FACTORY DEFAULT SETTINGS: MODULAR JACK PIN OUTS - Modular Jack (RJ-11) on PC Board: C-1100 and C-1200 Series Note: Functions on Pins 3, 4, & 6 are optional features. PIN ASSIGNMENTS: C-1100 Series - 332 / 170 Type PIN ASSIGNMENTS: C-1200 Series - NEMATS 1 / TS 2 Type Note: Functions on Pins S, Y, 6, & 19 are optional features. MODEL NUMBERS: Reno A & E Model C-1000 Series - Specifications are subject to change to reflect improvements and upgrades. Visit our Website at www.renoae.com for the most current information on all of our products.P/N 551-0308-00 3/25/03 C-1200-SS C-1201-SS APL# 660-017-003 ECPI PN: 44665G70 APL# 660-017-004 ECPI PN: 44665G71 16.A.21.d Packet Pg. 836 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LMD622 Catalog Sheet – 010411 Designed, Manufactured and Tested in the United States of America ISO 9001:2008 Registered DEFLECTOMETER is a trademark of Eberle Design Inc. LEXAN Resin is a trademark of General Electric DEFLECTOMETER® SERIES TWO CHANNEL NEMA TS-2 TYPE A LOOP MONITOR Built-in DEFLECTOMETER® Technology Provides Users With:  Call Strength Indicator for Optimum Sensitivity Programming  One step / One vehicle dynamic Sensitivity programming  Frequency Meter for immediate analysis of loop frequency, avoiding loop cross-talk problems  Push Button Programming Why guess when you can know your detector is optimally programmed and performing for all vehicle classes! ENHANCED FEATURES DEFLECTOMETER Call Strength Indictor: The Call Strength Indicator provides the technician with a simple one-step method for accurately setting the optimum level of sensitivity that ensures accurate vehicle detection of all vehicles, including motorcycles and high-bed trucks. NO MORE GUESSING! When a medium size vehicle is over the roadway loop, a DEFLECTOMETER® Call Strength value of “5” assures that the optimum sensitivity has been achieved. You can adjust the DEFLECTOMETER® reading DYNAMICALLY without moving the vehicle by using the front panel UP or DOWN sensitivity buttons. IT DOES NOT GET ANY EASIER THAN THIS! Frequency Meter: The built-in Frequency Meter reports the operating frequency of the loop network. Ensuring that adjacent loops are separated by at least 5 KHz will avoid crosstalk problems and future service calls. Output CALL Test Mode: The Output Call Test Mode provides a straight forward way to test that the Controller Unit is receiving an active output from the detector. This eliminates the need for cabinet test switches and associated wiring. A huge time saving feature during system set-up and trouble-shooting. Rugged Handle Assembly: The rugged handle assembly is made of GE LEXANTM, which is a super durable polycarbonate resin. The design of this assembly strengthens and protects the whole PCB assembly much better than conventional face plates. The temperature stability of critical components is improved with the more encompassing enclosure. Quick reference instructions are conveniently attached directly on the side of the unit, eliminating the need for cards. Advanced Loop Diagnostics: The Fault (FLT) indicator displays the type of fault: Short, Open or 25% change of inductance. The Fault Monitor will report and store three types of loop faults; Open Loops, Shorted Loops, and 25% sudden changes in inductance. Each type of fault is indicated by a unique sequence of flashes allowing the user to diagnose loop failures at a glance. Options: Relay Outputs, Model LMD622R STANDARD FEATURES  Automatic Tuning  Lightning & Surge Protection  Four (4) Frequency Levels  Fail Safe Output Configuration  Separate Color-Coded LED indicators  Wide Loop Inductance Range: 20 to 2500 microHenries. U.S. Pat. No. 7,855,893 16.A.21.d Packet Pg. 837 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LMD622 DEFLECTOMETER® SERIES TWO CHANNEL INDUCTIVE LOOP VEHICLE DETECTOR SPECIFICATIONS General Characteristics Controls: Front panel push buttons allow the user to set the Sensitivity Level, Operational mode, and nominal Frequency independently on each channel. Setting Sensitivity - Front Panel Push Buttons The DEFLECTOMETER® (front panel 7-segment LED) aids in setting the DETECTOR quickly and easily to the most optimum sensitivity level to ensure the trouble-free detection of all vehicles, including motorcycles and high bed vehicles. For typical vehicles (mid-size vehicle / small pick up) utilizing properly installed roadway loops, a Call Strength of 5 displayed on the DEFLECTOMETER® during the DETECT output period indicates an optimum sensitivity setting. For high profile vehicles (commercial trucks, 4x4’s, etc…), a Call Strength value of 4 will be optimum. For low profile vehicles (sports cars, etc…), a Call Strength value of 6 will be optimum. Adjusting sensitivity using the DEFLECTOMETER® (recommended): The DEFLECTOMETER® should read zero (0) with no vehicle over the roadway loop. When a typical mid-sized vehicle is completely in the detection zone (DET indicator On), the Call Strength value should be adjusted up or down until the DEFLECTOMETER® displays the desired optimum value of 5 (or 4 or 6 as described above). If a typical vehicle located over the roadway loop causes the Call Strength “7” to be displayed on the DEFLECTOMETER®, the sensitivity should be decreased two levels. This can be done by pressing the front panel SENS button two times to achieve the Call Strength value of 5. If a typical vehicle located over the roadway loop causes the number “2” to be displayed on the DEFLECTOMETER®, the sensitivity should be increased three levels. This can be done by pressing the front panel SENS button three times to achieve the Call Strength value of 5. NOTE: THE DEFLECTOMETER® CALL STRENGTH DYNAMICALLY UPDATES AFTER EACH SENSITIVITY LEVEL CHANGE, ALLOWING YOU TO CHANGE SENSITIVITY SETTINGS WHILE A VEHICLE REMAINS IN THE LOOP DETECTION ZONE. Adjusting sensitivity without using the DEFLECTOMETER® (manually setting sensitivity): The DETECTOR offers 9 levels of sensitivity (1 to 9). Level 9 is the highest sensitivity. Sensitivity Level can be manually set to any desired value by pressing the front panel SENS buttons ( or) when a vehicle is NOT over the roadway loop (DET indicator Off). The first time a SENS button ( or) is pressed, the current Sensitivity Level is displayed on the DEFLECTOMETER® for 3 seconds. If either SENS button ( or) is pressed again before the 3 second period ends, the Sensitivity Level will increase (SENS ) or decrease (SENS ). The new Sensitivity Level value will be displayed on the DEFLECTOMETER® display for 3 seconds. The factory default Sensitivity setting is level 6. Sensitivity ∆L / L Sensitivity ∆L / L 9 0.01% 4 0.32% 8 0.02% 3 0.64% 7 0.04% 2 1.28% 6 0.08% 1 2.56% 5 0.16% - - Loop Frequency / Loop Frequency Display: One of four frequency settings may be selected via the front panel FREQ push button to alleviate interference which may occur when loops connected to different detectors are located adjacent to one another. To help prevent or diagnose crosstalk problems, the loop frequency is displayed on the front panel DEFLECTOMETER®. The current loop frequency is displayed after pressing the FREQ button to display the current Frequency Level. The frequency is shown in KHz with a “-“ symbol displayed both before and after the numeric digits shown on the DEFLECTOMETER®. For example, after pressing the FREQ button once the display sequence might show: “3”  “-“  “2”  “7”  “-“ This sequence would indicate Frequency Level “3” and a loop reference frequency of 27 KHz. Detectors on adjacent loops should all be separated by at least 5 KHz. Loop Fault Monitoring: The Detector continuously checks the integrity of the loop. The system is able to detect shorted or open circuit loops, or sudden changes in inductance exceeding 25% of the nominal inductance. If a fault is detected, the OUT and FLT indicators continuously emit a sequence of flashes. Additionally, the DEFLECTOMETER® displays the letter “F” indicating a current loop fault. Each type of fault is identified by a unique flash sequence: Flash Sequence Fault 1 flash Open Circuit Loop. 2 flashes Shorted Circuit Loop. 3 flashes 25% excessive change in inductance. If the Open or Shorted fault condition self heals, the DET indicator and DEFLECTOMETER® will return to normal operation. The FLT indicator will continue to flash with the sequence signifying the type of fault that was last detected. In the case of the excessive inductance change fault, the unit will retune to the new inductance after a period of two seconds and continue operation. The fault condition will be indicated by the flash sequence of the FLT indicator. Operational Modes Presence: For each channel, a Presence output mode may be selected from the front panel MODE push button. If presence mode is selected then a choice of short (S) or long (L) can be selected. Short Presence is defined as 30 minutes and Long Presence is defined as 120 minutes. Pulse: For each channel, a Pulse output mode (P) may be selected from the front panel MODE push button. In Pulse mode, a 125 ms ± 25ms width pulse will be output for each vehicle entering the loop. Call: For each channel, a continuous CALL output (C) may be selected from the front panel MODE push button which will simulate the presence of a vehicle. This mode is used for testing the CALL output of a channel. Channel Off: For each channel, the Channel Off (-) may be selected from the front panel Mode push button. This option turns OFF the channel and disables the oscillator. An additional option allows the Status Output to be turned ON while the channel is OFF. Status Outputs: Each channel includes a separate output which is used to transmit operational status information to a Bus Interface Unit (BIU). Fault information is transmitted by means of pulse-width modulation. Pulse widths shown are +10ms. Status Status Output Condition Normal operation / No fault ....................................................................... Continuous ON (low) Watchdog fail / Power Supply fail .......................................................... Continuous OFF (high) Open circuit loop ...................................................................................... 50ms OFF, 50ms ON Short circuit loop .................................................................................... 100ms OFF, 50ms ON 25% change in inductance ..................................................................... 150ms OFF, 50ms ON Specifications: DC Supply Voltage: Minimum ................................................................................. 10.8 Vdc Maximum ................................................................................ 28.8 Vdc DC Supply Current: Maximum ..................................................................................100 mA Optically Isolated Outputs: True (low, 50 mA) .................................................. Less than 1.5 Vdc Maximum Current .................................................................... 100 mA Outputs are fail-safe such that a Detector with no power will provide the True (low) Call state. Relay Outputs: AC Contact Rating ...................................................... 5A @ 120 Vac DC Contact Rating ......................................................... 5A @ 30 Vdc Environmental: Operating Temperature Range: -30oF to 165oF (-34oC to 74oC) Mechanical: International Card 4.500”H (114.30mm) x 6.875”D (174.63mm) x 1.14”W (28.96mm), excluding handle, with 44 pin double sided edge connector. Pin Assignment: PIN FUNCTION PIN FUNCTION A Logic Ground 1 Reserved B DC Supply 2 Reserved C External Reset 3 Reserved D Ch 1 Loop Input 4 Ch 1 Redundant Loop Input E Ch 1 Loop Input 5 Ch 1 Redundant Loop Input F Ch 1 Output (+) 6 Reserved H Ch 1 Output (-) 7 Ch 1 Status Output J Ch 2 Loop Input 8 Ch 2 Redundant Loop Input K Ch 2 Loop Input 9 Ch 2 Redundant Loop Input L Chassis Ground 10 Reserved M Reserved 11 Reserved N Reserved 12 Reserved P Reserved 13 Reserved R Reserved 14 Reserved S Reserved 15 Reserved T Reserved 16 Reserved U Reserved 17 Reserved V Reserved 18 Reserved W Ch 2 Output (+) 19 Reserved X Ch 2 Output (-) 20 Ch 2 Status Output Y Reserved 21 Reserved Z Reserved 22 Reserved 16.A.21.d Packet Pg. 838 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / Document Number FEI/EIN Number Date Filed State Status Last Event Event Date Filed Detail by FEI/EIN Number Foreign Profit Corporation ECONOLITE CONTROL PRODUCTS, INC. Filing Information P06995 95-3196532 08/06/1985 CA ACTIVE REINSTATEMENT 10/04/2010 Principal Address 1250 N. Tustin Ave Anaheim, CA 92807 Changed: 04/27/2018 Mailing Address 1250 N. Tustin Ave Anaheim, CA 92807 Changed: 04/27/2018 Registered Agent Name & Address NRAI SERVICES, INC 1200 South Pine Island Road Plantation, FL 33324 Name Changed: 09/26/2006 Address Changed: 02/11/2011 Officer/Director Detail Name & Address Title Secretary LEANO, RAQUEL 1250 N. Tustin Ave Anaheim, CA 92807 Title CEO, Director DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.d Packet Pg. 839 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) DOYLE, MICHAEL 1250 N. Tustin Ave Anaheim, CA 92807 Title CFO, Director TRACEY, JOHN CFO 1250 N. Tustin Ave Anaheim, CA 92807 Title COO, Director MOHADDES, ABBAS 1250 N. Tustin Ave Anaheim, CA 92807 Title VP - OPERATIONS HAGEWOOD, WAYNE 1250 N. Tustin Ave Anaheim, CA 92807 Title VP - HUMAN RESOURCES BURNS, SUE 1250 N. Tustin Ave Anaheim, CA 92807 Title CHIEF TECHNOLOGY OFFICE RAAMOT, ERIC 1250 N. Tustin Ave Anaheim, CA 92807 Title VP - STRATEGIC MARKETING OLIVER, PERSEPHONE 1250 N. Tustin Ave Anaheim, CA 92807 Title Director DOYLE, WILLIAM 1250 N. Tustin Ave Anaheim, CA 92807 Title Asst. Secretary COOK, ALICE 1250 N. Tustin Ave. Anaheim, CA 92807 Page 2 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.d Packet Pg. 840 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Annual Reports Report Year Filed Date 2017 04/27/2017 2018 04/27/2018 2019 01/18/2019 Document Images 01/18/2019 -- ANNUAL REPORT View image in PDF format 04/27/2018 -- ANNUAL REPORT View image in PDF format 04/27/2017 -- ANNUAL REPORT View image in PDF format 04/21/2016 -- ANNUAL REPORT View image in PDF format 03/13/2015 -- ANNUAL REPORT View image in PDF format 02/20/2014 -- ANNUAL REPORT View image in PDF format 02/13/2013 -- ANNUAL REPORT View image in PDF format 02/08/2012 -- ANNUAL REPORT View image in PDF format 01/06/2011 -- ANNUAL REPORT View image in PDF format 10/04/2010 -- REINSTATEMENT View image in PDF format 03/10/2009 -- ANNUAL REPORT View image in PDF format 04/30/2008 -- ANNUAL REPORT View image in PDF format 04/30/2007 -- ANNUAL REPORT View image in PDF format 09/26/2006 -- Reg. Agent Change View image in PDF format 05/04/2006 -- ANNUAL REPORT View image in PDF format 04/28/2005 -- ANNUAL REPORT View image in PDF format 04/29/2004 -- ANNUAL REPORT View image in PDF format 05/08/2003 -- ANNUAL REPORT View image in PDF format 04/22/2002 -- ANNUAL REPORT View image in PDF format 05/11/2001 -- ANNUAL REPORT View image in PDF format 03/28/2000 -- ANNUAL REPORT View image in PDF format 04/27/1999 -- ANNUAL REPORT View image in PDF format 03/30/1998 -- ANNUAL REPORT View image in PDF format 04/23/1997 -- ANNUAL REPORT View image in PDF format 04/30/1996 -- ANNUAL REPORT View image in PDF format 04/21/1995 -- ANNUAL REPORT View image in PDF format Florida Department of State, Division of Corporations Page 3 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.d Packet Pg. 841 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 1 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: THE E-VERIFY MEMORANDUM OF UNDERSTANDING FOR EMPLOYERS ARTICLE I PURPOSE AND AUTHORITY E-Verify is a program that electronically confirms an employee’s eligibility to work in the United States after completion of Form I-9, Employment Eligibility Verification (Form I-9). This Memorandum of Understanding (MOU) explains certain features of the E-Verify program and describes specific responsibilities of the Employer, the Social Security Administration (SSA), and DHS. Authority for the E-Verify program is found in Title IV, Subtitle A, of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996 (IIRIRA), Pub. L. 104-208, 110 Stat. 3009, as amended (8 U.S.C. § 1324a note). The Federal Acquisition Regulation (FAR) Subpart 22.18, “Employment Eligibility Verification” and Executive Order 12989, as amended, provide authority for Federal contractors and subcontractors (Federal contractor) to use E-Verify to verify the employment eligibility of certain employees working on Federal contracts. ARTICLE II RESPONSIBILITIES A. RESPONSIBILITIES OF THE EMPLOYER 1.The Employer agrees to display the following notices supplied by DHS in a prominent place that is clearly visible to prospective employees and all employees who are to be verified through the system: a.Notice of E-Verify Participation b.Notice of Right to Work 2.The Employer agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the Employer representatives to be contacted about E-Verify. The Employer also agrees to keep such information current by providing updated information to SSA and DHS whenever the representatives’ contact information changes. 3.The Employer agrees to grant E-Verify access only to current employees who need E-Verify access. Employers must promptly terminate an employee’s E-Verify access if the employer is separated from the company or no longer needs access to E-Verify. 156765 The parties to this agreement are the Department of Homeland Security (DHS) and the Econolite Control Products, Inc. (Employer). The purpose of this agreement is to set forth terms and conditions which the Employer will follow while participating in E-Verify. 16.A.21.d Packet Pg. 842 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 2 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: 4. The Employer agrees to become familiar with and comply with the most recent version of the E-Verify User Manual. 5. The Employer agrees that any Employer Representative who will create E-Verify cases will complete the E-Verify Tutorial before that individual creates any cases. a. The Employer agrees that all Employer representatives will take the refresher tutorials when prompted by E-Verify in order to continue using E-Verify. Failure to complete a refresher tutorial will prevent the Employer Representative from continued use of E-Verify. 6. The Employer agrees to comply with current Form I-9 procedures, with two exceptions: a. If an employee presents a "List B" identity document, the Employer agrees to only accept "List B" documents that contain a photo. (List B documents identified in 8 C.F.R. § 274a.2(b)(1)(B)) can be presented during the Form I-9 process to establish identity.) If an employee objects to the photo requirement for religious reasons, the Employer should contact E-Verify at 888-464-4218. b. If an employee presents a DHS Form I-551 (Permanent Resident Card), Form I-766 (Employment Authorization Document), or U.S. Passport or Passport Card to complete Form I-9, the Employer agrees to make a photocopy of the document and to retain the photocopy with the employee’s Form I-9. The Employer will use the photocopy to verify the photo and to assist DHS with its review of photo mismatches that employees contest. DHS may in the future designate other documents that activate the photo screening tool. Note: Subject only to the exceptions noted previously in this paragraph, employees still retain the right to present any List A, or List B and List C, document(s) to complete the Form I-9. 7. The Employer agrees to record the case verification number on the employee's Form I-9 or to print the screen containing the case verification number and attach it to the employee's Form I-9. 8. The Employer agrees that, although it participates in E-Verify, the Employer has a responsibility to complete, retain, and make available for inspection Forms I-9 that relate to its employees, or from other requirements of applicable regulations or laws, including the obligation to comply with the antidiscrimination requirements of section 274B of the INA with respect to Form I-9 procedures. a. The following modified requirements are the only exceptions to an Employer’s obligation to not employ unauthorized workers and comply with the anti-discrimination provision of the INA: (1) List B identity documents must have photos, as described in paragraph 6 above; (2) When an Employer confirms the identity and employment eligibility of newly hired employee using E-Verify procedures, the Employer establishes a rebuttable presumption that it has not violated section 274A(a)(1)(A) of the Immigration and Nationality Act (INA) with respect to the hiring of that employee; (3) If the Employer receives a final nonconfirmation for an employee, but continues to employ that person, the Employer must notify DHS and the Employer is subject to a civil money penalty between $550 and $1,100 for each failure to notify DHS of continued employment following a final nonconfirmation; (4) If the Employer continues to employ an employee after receiving a final nonconfirmation, then the Employer is subject to a rebuttable presumption that it has knowingly 156765 16.A.21.d Packet Pg. 843 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 3 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: employed an unauthorized alien in violation of section 274A(a)(1)(A); and (5) no E-Verify participant is civilly or criminally liable under any law for any action taken in good faith based on information provided through the E-Verify. b. DHS reserves the right to conduct Form I-9 compliance inspections, as well as any other enforcement or compliance activity authorized by law, including site visits, to ensure proper use of E-Verify. 9. The Employer is strictly prohibited from creating an E-Verify case before the employee has been hired, meaning that a firm offer of employment was extended and accepted and Form I-9 was completed. The Employer agrees to create an E-Verify case for new employees within three Employer business days after each employee has been hired (after both Sections 1 and 2 of Form I-9 have been completed), and to complete as many steps of the E-Verify process as are necessary according to the E-Verify User Manual. If E-Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the Employer's attempting, in good faith, to make inquiries during the period of unavailability. 10. The Employer agrees not to use E-Verify for pre-employment screening of job applicants, in support of any unlawful employment practice, or for any other use that this MOU or the E-Verify User Manual does not authorize. 11. The Employer must use E-Verify for all new employees. The Employer will not verify selectively and will not verify employees hired before the effective date of this MOU. Employers who are Federal contractors may qualify for exceptions to this requirement as described in Article II.B of this MOU. 12. The Employer agrees to follow appropriate procedures (see Article III below) regarding tentative nonconfirmations. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. Further, when employees contest a tentative nonconfirmation based upon a photo mismatch, the Employer must take additional steps (see Article III.B. below) to contact DHS with information necessary to resolve the challenge. 13. The Employer agrees not to take any adverse action against an employee based upon the employee's perceived employment eligibility status while SSA or DHS is processing the verification request unless the Employer obtains knowledge (as defined in 8 C.F.R. § 274a.1(l)) that the employee is not work authorized. The Employer understands that an initial inability of the SSA or DHS automated verification system to verify work authorization, a tentative nonconfirmation, a case in continuance (indicating the need for additional time for the government to resolve a case), or the finding of a photo mismatch, does not establish, and should not be interpreted as, evidence that the employee is not work authorized. In any of such cases, the employee must be provided a full and fair opportunity to contest the finding, and if he or she does so, the employee may not be terminated or suffer any adverse employment consequences based upon the employee’s perceived employment eligibility status 156765 16.A.21.d Packet Pg. 844 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 4 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: (including denying, reducing, or extending work hours, delaying or preventing training, requiring an employee to work in poorer conditions, withholding pay, refusing to assign the employee to a Federal contract or other assignment, or otherwise assuming that he or she is unauthorized to work) until and unless secondary verification by SSA or DHS has been completed and a final nonconfirmation has been issued. If the employee does not choose to contest a tentative nonconfirmation or a photo mismatch or if a secondary verification is completed and a final nonconfirmation is issued, then the Employer can find the employee is not work authorized and terminate the employee’s employment. Employers or employees with questions about a final nonconfirmation may call E-Verify at 1-888-464- 4218 (customer service) or 1-888-897-7781 (worker hotline). 14. The Employer agrees to comply with Title VII of the Civil Rights Act of 1964 and section 274B of the INA as applicable by not discriminating unlawfully against any individual in hiring, firing, employment eligibility verification, or recruitment or referral practices because of his or her national origin or citizenship status, or by committing discriminatory documentary practices. The Employer understands that such illegal practices can include selective verification or use of E-Verify except as provided in part D below, or discharging or refusing to hire employees because they appear or sound “foreign” or have received tentative nonconfirmations. The Employer further understands that any violation of the immigration-related unfair employment practices provisions in section 274B of the INA could subject the Employer to civil penalties, back pay awards, and other sanctions, and violations of Title VII could subject the Employer to back pay awards, compensatory and punitive damages. Violations of either section 274B of the INA or Title VII may also lead to the termination of its participation in E-Verify. If the Employer has any questions relating to the anti-discrimination provision, it should contact OSC at 1-800-255-8155 or 1-800-237-2515 (TDD). 15. The Employer agrees that it will use the information it receives from E-Verify only to confirm the employment eligibility of employees as authorized by this MOU. The Employer agrees that it will safeguard this information, and means of access to it (such as PINS and passwords), to ensure that it is not used for any other purpose and as necessary to protect its confidentiality, including ensuring that it is not disseminated to any person other than employees of the Employer who are authorized to perform the Employer's responsibilities under this MOU, except for such dissemination as may be authorized in advance by SSA or DHS for legitimate purposes. 16. The Employer agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email at E-Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 17. The Employer acknowledges that the information it receives from SSA is governed by the Privacy Act (5 U.S.C. § 552a(i)(1) and (3)) and the Social Security Act (42 U.S.C. 1306(a)). Any person who obtains this information under false pretenses or uses it for any purpose other than as provided for in this MOU may be subject to criminal penalties. 18. The Employer agrees to cooperate with DHS and SSA in their compliance monitoring and evaluation of E-Verify, which includes permitting DHS, SSA, their contractors and other agents, upon 156765 16.A.21.d Packet Pg. 845 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 5 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: reasonable notice, to review Forms I-9 and other employment records and to interview it and its employees regarding the Employer’s use of E-Verify, and to respond in a prompt and accurate manner to DHS requests for information relating to their participation in E-Verify. 19. The Employer shall not make any false or unauthorized claims or references about its participation in E-Verify on its website, in advertising materials, or other media. The Employer shall not describe its services as federally-approved, federally-certified, or federally-recognized, or use language with a similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify services and any claim to that effect is false. 20. The Employer shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the prior written consent of DHS. 21. The Employer agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see M-795 (Web)) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the Employer’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 22. The Employer understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the Employer may be subject to appropriate legal action and termination of its participation in E-Verify according to this MOU. B. RESPONSIBILITIES OF FEDERAL CONTRACTORS 1. If the Employer is a Federal contractor with the FAR E-Verify clause subject to the employment verification terms in Subpart 22.18 of the FAR, it will become familiar with and comply with the most current version of the E-Verify User Manual for Federal Contractors as well as the E-Verify Supplemental Guide for Federal Contractors. 2. In addition to the responsibilities of every employer outlined in this MOU, the Employer understands that if it is a Federal contractor subject to the employment verification terms in Subpart 22.18 of the FAR it must verify the employment eligibility of any “employee assigned to the contract” (as defined in FAR 22.1801). Once an employee has been verified through E-Verify by the Employer, the Employer may not create a second case for the employee through E-Verify. a. An Employer that is not enrolled in E-Verify as a Federal contractor at the time of a contract award must enroll as a Federal contractor in the E-Verify program within 30 calendar days of contract award and, within 90 days of enrollment, begin to verify employment eligibility of new hires using E-Verify. The Employer must verify those employees who are working in the United States, whether or not they are assigned to the contract. Once the Employer begins verifying new hires, such verification of new hires must be initiated within three business days after the hire date. Once enrolled in E-Verify as a Federal contractor, the Employer must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. 156765 16.A.21.d Packet Pg. 846 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 6 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: b. Employers enrolled in E-Verify as a Federal contractor for 90 days or more at the time of a contract award must use E-Verify to begin verification of employment eligibility for new hires of the Employer who are working in the United States, whether or not assigned to the contract, within three business days after the date of hire. If the Employer is enrolled in E-Verify as a Federal contractor for 90 calendar days or less at the time of contract award, the Employer must, within 90 days of enrollment, begin to use E-Verify to initiate verification of new hires of the contractor who are working in the United States, whether or not assigned to the contract. Such verification of new hires must be initiated within three business days after the date of hire. An Employer enrolled as a Federal contractor in E-Verify must begin verification of each employee assigned to the contract within 90 calendar days after date of contract award or within 30 days after assignment to the contract, whichever is later. c. Federal contractors that are institutions of higher education (as defined at 20 U.S.C. 1001(a)), state or local governments, governments of Federally recognized Indian tribes, or sureties performing under a takeover agreement entered into with a Federal agency under a performance bond may choose to only verify new and existing employees assigned to the Federal contract. Such Federal contractors may, however, elect to verify all new hires, and/or all existing employees hired after November 6, 1986. Employers in this category must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. d. Upon enrollment, Employers who are Federal contractors may elect to verify employment eligibility of all existing employees working in the United States who were hired after November 6, 1986, instead of verifying only those employees assigned to a covered Federal contract. After enrollment, Employers must elect to verify existing staff following DHS procedures and begin E-Verify verification of all existing employees within 180 days after the election. e. The Employer may use a previously completed Form I-9 as the basis for creating an E-Verify case for an employee assigned to a contract as long as: i. That Form I-9 is complete (including the SSN) and complies with Article II.A.6, ii. The employee’s work authorization has not expired, and iii. The Employer has reviewed the Form I-9 information either in person or in communications with the employee to ensure that the employee’s Section 1, Form I-9 attestation has not changed (including, but not limited to, a lawful permanent resident alien having become a naturalized U.S. citizen). f. The Employer shall complete a new Form I-9 consistent with Article II.A.6 or update the previous Form I-9 to provide the necessary information if: i. The Employer cannot determine that Form I-9 complies with Article II.A.6, ii. The employee’s basis for work authorization as attested in Section 1 has expired or changed, or iii. The Form I-9 contains no SSN or is otherwise incomplete. Note: If Section 1 of Form I-9 is otherwise valid and up-to-date and the form otherwise complies with 156765 16.A.21.d Packet Pg. 847 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 7 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Article II.C.5, but reflects documentation (such as a U.S. passport or Form I-551) that expired after completing Form I-9, the Employer shall not require the production of additional documentation, or use the photo screening tool described in Article II.A.5, subject to any additional or superseding instructions that may be provided on this subject in the E-Verify User Manual. g. The Employer agrees not to require a second verification using E-Verify of any assigned employee who has previously been verified as a newly hired employee under this MOU or to authorize verification of any existing employee by any Employer that is not a Federal contractor based on this Article. 3. The Employer understands that if it is a Federal contractor, its compliance with this MOU is a performance requirement under the terms of the Federal contract or subcontract, and the Employer consents to the release of information relating to compliance with its verification responsibilities under this MOU to contracting officers or other officials authorized to review the Employer’s compliance with Federal contracting requirements. C. RESPONSIBILITIES OF SSA 1. SSA agrees to allow DHS to compare data provided by the Employer against SSA’s database. SSA sends DHS confirmation that the data sent either matches or does not match the information in SSA’s database. 2. SSA agrees to safeguard the information the Employer provides through E-Verify procedures. SSA also agrees to limit access to such information, as is appropriate by law, to individuals responsible for the verification of Social Security numbers or responsible for evaluation of E-Verify or such other persons or entities who may be authorized by SSA as governed by the Privacy Act (5 U.S.C. § 552a), the Social Security Act (42 U.S.C. 1306(a)), and SSA regulations (20 CFR Part 401). 3. SSA agrees to provide case results from its database within three Federal Government work days of the initial inquiry. E-Verify provides the information to the Employer. 4. SSA agrees to update SSA records as necessary if the employee who contests the SSA tentative nonconfirmation visits an SSA field office and provides the required evidence. If the employee visits an SSA field office within the eight Federal Government work days from the date of referral to SSA, SSA agrees to update SSA records, if appropriate, within the eight-day period unless SSA determines that more than eight days may be necessary. In such cases, SSA will provide additional instructions to the employee. If the employee does not visit SSA in the time allowed, E-Verify may provide a final nonconfirmation to the employer. Note: If an Employer experiences technical problems, or has a policy question, the employer should contact E-Verify at 1-888-464-4218. D. RESPONSIBILITIES OF DHS 1. DHS agrees to provide the Employer with selected data from DHS databases to enable the Employer to conduct, to the extent authorized by this MOU: a. Automated verification checks on alien employees by electronic means, and 156765 16.A.21.d Packet Pg. 848 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 8 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: b. Photo verification checks (when available) on employees. 2. DHS agrees to assist the Employer with operational problems associated with the Employer's participation in E-Verify. DHS agrees to provide the Employer names, titles, addresses, and telephone numbers of DHS representatives to be contacted during the E-Verify process. 3. DHS agrees to provide to the Employer with access to E-Verify training materials as well as an E-Verify User Manual that contain instructions on E-Verify policies, procedures, and requirements for both SSA and DHS, including restrictions on the use of E-Verify. 4. DHS agrees to train Employers on all important changes made to E-Verify through the use of mandatory refresher tutorials and updates to the E-Verify User Manual. Even without changes to E-Verify, DHS reserves the right to require employers to take mandatory refresher tutorials. 5. DHS agrees to provide to the Employer a notice, which indicates the Employer's participation in E-Verify. DHS also agrees to provide to the Employer anti-discrimination notices issued by the Office of Special Counsel for Immigration-Related Unfair Employment Practices (OSC), Civil Rights Division, U.S. Department of Justice. 6. DHS agrees to issue each of the Employer’s E-Verify users a unique user identification number and password that permits them to log in to E-Verify. 7. DHS agrees to safeguard the information the Employer provides, and to limit access to such information to individuals responsible for the verification process, for evaluation of E-Verify, or to such other persons or entities as may be authorized by applicable law. Information will be used only to verify the accuracy of Social Security numbers and employment eligibility, to enforce the INA and Federal criminal laws, and to administer Federal contracting requirements. 8. DHS agrees to provide a means of automated verification that provides (in conjunction with SSA verification procedures) confirmation or tentative nonconfirmation of employees' employment eligibility within three Federal Government work days of the initial inquiry. 9. DHS agrees to provide a means of secondary verification (including updating DHS records) for employees who contest DHS tentative nonconfirmations and photo mismatch tentative nonconfirmations. This provides final confirmation or nonconfirmation of the employees' employment eligibility within 10 Federal Government work days of the date of referral to DHS, unless DHS determines that more than 10 days may be necessary. In such cases, DHS will provide additional verification instructions. ARTICLE III REFERRAL OF INDIVIDUALS TO SSA AND DHS A. REFERRAL TO SSA 1. If the Employer receives a tentative nonconfirmation issued by SSA, the Employer must print the notice as directed by E-Verify. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify 156765 16.A.21.d Packet Pg. 849 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 9 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. After a tentative nonconfirmation, the Employer will refer employees to SSA field offices only as directed by E-Verify. The Employer must record the case verification number, review the employee information submitted to E-Verify to identify any errors, and find out whether the employee contests the tentative nonconfirmation. The Employer will transmit the Social Security number, or any other corrected employee information that SSA requests, to SSA for verification again if this review indicates a need to do so. 4. The Employer will instruct the employee to visit an SSA office within eight Federal Government work days. SSA will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 5. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. 6. The Employer agrees not to ask the employee to obtain a printout from the Social Security Administration number database (the Numident) or other written verification of the SSN from the SSA. B. REFERRAL TO DHS 1. If the Employer receives a tentative nonconfirmation issued by DHS, the Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. The Employer agrees to refer individuals to DHS only when the employee chooses to contest a tentative nonconfirmation. 4. If the employee contests a tentative nonconfirmation issued by DHS, the Employer will instruct the 156765 16.A.21.d Packet Pg. 850 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 10 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: employee to contact DHS through its toll-free hotline (as found on the referral letter) within eight Federal Government work days. 5. If the Employer finds a photo mismatch, the Employer must provide the photo mismatch tentative nonconfirmation notice and follow the instructions outlined in paragraph 1 of this section for tentative nonconfirmations, generally. 6. The Employer agrees that if an employee contests a tentative nonconfirmation based upon a photo mismatch, the Employer will send a copy of the employee’s Form I-551, Form I-766, U.S. Passport, or passport card to DHS for review by: a. Scanning and uploading the document, or b. Sending a photocopy of the document by express mail (furnished and paid for by the employer). 7. The Employer understands that if it cannot determine whether there is a photo match/mismatch, the Employer must forward the employee’s documentation to DHS as described in the preceding paragraph. The Employer agrees to resolve the case as specified by the DHS representative who will determine the photo match or mismatch. 8. DHS will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 9. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. ARTICLE IV SERVICE PROVISIONS A. NO SERVICE FEES 1. SSA and DHS will not charge the Employer for verification services performed under this MOU. The Employer is responsible for providing equipment needed to make inquiries. To access E-Verify, an Employer will need a personal computer with Internet access. ARTICLE V MODIFICATION AND TERMINATION A. MODIFICATION 1. This MOU is effective upon the signature of all parties and shall continue in effect for as long as the SSA and DHS operates the E-Verify program unless modified in writing by the mutual consent of all parties. 2. Any and all E-Verify system enhancements by DHS or SSA, including but not limited to E-Verify checking against additional data sources and instituting new verification policies or procedures, will be covered under this MOU and will not cause the need for a supplemental MOU that outlines these changes. 156765 16.A.21.d Packet Pg. 851 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 11 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: B. TERMINATION 1. The Employer may terminate this MOU and its participation in E-Verify at any time upon 30 days prior written notice to the other parties. 2. Notwithstanding Article V, part A of this MOU, DHS may terminate this MOU, and thereby the Employer’s participation in E-Verify, with or without notice at any time if deemed necessary because of the requirements of law or policy, or upon a determination by SSA or DHS that there has been a breach of system integrity or security by the Employer, or a failure on the part of the Employer to comply with established E-Verify procedures and/or legal requirements. The Employer understands that if it is a Federal contractor, termination of this MOU by any party for any reason may negatively affect the performance of its contractual responsibilities. Similarly, the Employer understands that if it is in a state where E-Verify is mandatory, termination of this by any party MOU may negatively affect the Employer’s business. 3. An Employer that is a Federal contractor may terminate this MOU when the Federal contract that requires its participation in E-Verify is terminated or completed. In such cases, the Federal contractor must provide written notice to DHS. If an Employer that is a Federal contractor fails to provide such notice, then that Employer will remain an E-Verify participant, will remain bound by the terms of this MOU that apply to non-Federal contractor participants, and will be required to use the E-Verify procedures to verify the employment eligibility of all newly hired employees. 4. The Employer agrees that E-Verify is not liable for any losses, financial or otherwise, if the Employer is terminated from E-Verify. ARTICLE VI PARTIES A. Some or all SSA and DHS responsibilities under this MOU may be performed by contractor(s), and SSA and DHS may adjust verification responsibilities between each other as necessary. By separate agreement with DHS, SSA has agreed to perform its responsibilities as described in this MOU. B. Nothing in this MOU is intended, or should be construed, to create any right or benefit, substantive or procedural, enforceable at law by any third party against the United States, its agencies, officers, or employees, or against the Employer, its agents, officers, or employees. C. The Employer may not assign, directly or indirectly, whether by operation of law, change of control or merger, all or any part of its rights or obligations under this MOU without the prior written consent of DHS, which consent shall not be unreasonably withheld or delayed. Any attempt to sublicense, assign, or transfer any of the rights, duties, or obligations herein is void. D. Each party shall be solely responsible for defending any claim or action against it arising out of or related to E-Verify or this MOU, whether civil or criminal, and for any liability wherefrom, including (but not limited to) any dispute between the Employer and any other person or entity regarding the applicability of Section 403(d) of IIRIRA to any action taken or allegedly taken by the Employer. E. The Employer understands that its participation in E-Verify is not confidential information and may be disclosed as authorized or required by law and DHS or SSA policy, including but not limited to, 156765 16.A.21.d Packet Pg. 852 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 12 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Congressional oversight, E-Verify publicity and media inquiries, determinations of compliance with Federal contractual requirements, and responses to inquiries under the Freedom of Information Act (FOIA). F. The individuals whose signatures appear below represent that they are authorized to enter into this MOU on behalf of the Employer and DHS respectively. The Employer understands that any inaccurate statement, representation, data or other information provided to DHS may subject the Employer, its subcontractors, its employees, or its representatives to: (1) prosecution for false statements pursuant to 18 U.S.C. 1001 and/or; (2) immediate termination of its MOU and/or; (3) possible debarment or suspension. G. The foregoing constitutes the full agreement on this subject between DHS and the Employer. To be accepted as an E-Verify participant, you should only sign the Employer’s Section of the signature page. If you have any questions, contact E-Verify at 1-888-464-4218. 156765 16.A.21.d Packet Pg. 853 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 13 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Approved by: Employer Name (Please Type or Print) Title Signature Date Department of Homeland Security – Verification Division Name (Please Type or Print) Title Signature Date 156765 Econolite Control Products, Inc. Bernice Caras Electronically Signed 05/01/2019 USCIS Verification Division Electronically Signed 05/01/2019 16.A.21.d Packet Pg. 854 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 14 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Information Required for the E-Verify Program Information relating to your Company: Company Name Company Facility Address Company Alternate Address County or Parish Employer Identification Number North American Industry Classification Systems Code Parent Company Number of Employees Number of Sites Verified for 156765 Econolite Control Products, Inc. 1250 North Tustin Ave. Anaheim, CA 92807 P O Box 6150 Anaheim, CA 92816-0150 ORANGE 953196532 339 Econolite Group 100 to 499 1 16.A.21.d Packet Pg. 855 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 15 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Are you verifying for more than 1 site? If yes, please provide the number of sites verified for in each State: 156765 CALIFORNIA 1 site(s) 16.A.21.d Packet Pg. 856 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 16 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Information relating to the Program Administrator(s) for your Company on policy questions or operational problems: 156765 Name Bernice Caras Phone Number (714) 630 - 3700 ext. 5501 Fax Number (714) 630 - 7123 Email Address bcaras@econolite.com 16.A.21.d Packet Pg. 857 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 17 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: 156765 Page intentionally left blank 16.A.21.d Packet Pg. 858 Attachment: 19-7607 Econlite Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANYPROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2016 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 1,000,000 6306J492624TCT19 Jessica Boswell X LOS-002453004-01 1,000,000 X N/A of Marsh Risk & Insurance Services Irvine, CA 92614 N X06/27/2019 4 06/27/20208106J496371TIL19 C 2,000,000 1,000,000 X 25674 N/A 1,000,000 X X non-contributory over any existing insurance and limited to liability arising out of the operations of the named insured subject to policy terms and conditions with respect to general liability. 11/06/2019 06/27/2019 Re: Bid # 19-7607 | Traffic Operations Signal Components & Hardware - For any and all work performed on behalf of Collier County. X 3295 Tamiami Trail East Naples, FL 34112 Collier County Board of County Collier County Board of County Commissioners is included as additional insured where required by written contract with respect to General Liability and ??Automobile Liability Policies. This insurance is primary and A Travelers Property Casualty Company Of America CN102330351-Econo-GAWU.-19-20 10,000 06/27/2020 1,000,000 2,000,000 25682 300,000 1,000,000 UB1N4540581914G 17901 Von Karman Avenue, Suite 1100 Marsh Risk & Insurance Services (949) 399-5800; License #0437153 1250 N. Tustin Avenue Econolite Group, Inc. Anaheim, CA 92807 06/27/2019 Commissioners X C 06/27/2020 Travelers Indemnity Co Of CT 16.A.21.e Packet Pg. 859 Attachment: 19-7607 Econlite_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 2: Vendor Check List IMPORTANT: THIS SHEET MUST BE SIGNED. Please read carefully, sign in the spaces indicated and return with your Proposal. Vendor should check off each of the following items as the necessary action is completed: The Solicitation Submittal has been signed. The Solicitation Pricing Document (Bid Schedule/Quote Schedule/etc.) has been completed and attached. All applicable forms have been signed and included, along with licenses to complete the requirements of the project. Any addenda have been signed and included. Affidavit for Claiming Status as a Local Business, if applicable. Division of Corporations - Florida Department of State – http://dos.myflorida.com/sunbiz/ (If work performed in the State). E-Verify/Immigration Affidavit (Memorandum of Understanding). ALL SUBMITTALS MUST HAVE THE SOLICITATION NUMBER AND TITLE Name of Firm: ________________________________________________________ Address: ________________________________________________________ City, State, Zip: ________________________________________________________ Telephone: ________________________________________________________ Email: ________________________________________________________ Representative Signature: ________________________________________________________ Representative Name: ________________________________________ Date ___________ Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 88 16.A.21.f Packet Pg. 860 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 3: Conflict of Interest Affidavit The Vendor certifies that, to the best of its knowledge and belief, the past and current work on any Collier County project affiliated with this solicitation does not pose an organizational conflict as described by one of the three categories b elow: Biased ground rules – The firm has not set the “ground rules” for affiliated past or current Collier County project identified above (e.g., writing a procurement’s statement of work, specifications, or performing systems engineering and technical direction for the procurement) which appears to skew the competition in favor of my firm. Impaired objectivity – The firm has not performed work on an affiliated past or current Collier County project identified above to evaluate proposals / past performance of itself or a competitor, which calls into question the contractor’s ability to render impartial advice to the government. Unequal access to information – The firm has not had access to nonpublic information as part of its performance of a Collier County project identified above which may have provided the contractor (or an affiliate) with an unfair competitive advantage in current or future solicitations and contracts. In addition to this signed affidavit, the contractor / vendor must provide the following: 1. All documents produced as a result of the work completed in the past or currently being worked on for the above-mentioned project; and, 2. Indicate if the information produced was obtained as a matter of public record (in the “sunshine”) or through non-public (not in the “sunshine”) conversation (s), meeting(s), document(s) and/or other means. Failure to disclose all material or having an organizational conflict in one or more of the three categories above be identif ied, may result in the disqualification for future solicitations affiliated with the above referenced project(s). By the signature below, the firm (employees, officers and/or agents) certifies, and hereby discloses, that, to the best of their knowledge and belief, all relevant facts concerning past, present, or currently planned interest or activity (financial, contractual, organizational, or otherwise) which relates to the project identified above has been fully disclosed and does not pose an organizational conflict. Firm: ____________________________________________________________________________ Signature and Date: _________________________________________________________________ Print Name: _______________________________________________________________________ Title of Signatory: __________________________________________________________________ Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 89 16.A.21.f Packet Pg. 861 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 4: Vendor Declaration Statement BOARD OF COUNTY COMMISSIONERS Collier County Government Complex Naples, Florida 34112 Dear Commissioners: The undersigned, as Vendor declares that this response is made without connection or arrangement with any other person and this proposal is in every respect fair and made in good faith, without collusion or fraud. The Vendor agrees, if this solicitation submittal is accepted, to execute a Collier County document for the purpose of establishing a formal contractual relationship between the firm and Collier County, for the performance of all requirements to which the solicitation pertains. The Vendor states that the submitted is based upon the documents listed by the above referenced Solicitation. Further, the vendor agrees that if awarded a contract for these goods and/or services, the vendor will not be eligible to compete, submit a proposal, be awarded, or perform as a sub-vendor for any future associated with work that is a result of this awarded contract. IN WITNESS WHEREOF, WE have hereunto subscribed our names on thi s _____ day of _____________, 20__ in the County of _______________, in the State of _____________. Firm’s Legal Name: Address: City, State, Zip Code: Florida Certificate of Authority Document Number Federal Tax Identification Number *CCR # or CAGE Code *Only if Grant Funded __________________________________________________________________________ Telephone: Signature by: (Typed and written) Title: Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 90 16.A.21.f Packet Pg. 862 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Additional Contact Information Send payments to: (required if different from above) Company name used as payee Contact name: Title: Address: City, State, ZIP Telephone: Email: Office servicing Collier County to place orders (required if different from above) Contact name: Title: Address: City, State, ZIP Telephone: Email: Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 91 16.A.21.f Packet Pg. 863 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 5: Immigration Affidavit Certification This Affidavit is required and should be signed, notarized by an authorized principal of the firm and submitted with formal solicitation submittals. Further, Vendors are required to enroll in the E -Verify program, and provide acceptable evidence of their enrollment, at the time of the submission of the Vendor’s proposal. Acceptable evidence consists of a copy of the properly completed E -Verify Company Profile page or a copy of the fully executed E-Verify Memorandum of Understanding for the company. Failure to include this Affidavit and acceptable evidence of enrollment in the E-Verify program may deem the Vendor’s proposal as non- responsive. Collier County will not intentionally award County contracts to any Vendor who knowingly employs unauthorized alien workers, constituting a violation of the employment provision contained in 8 U.S.C. Section 1324 a(e) Section 274A(e) of the Immigration and Nationality Act (“INA”). Collier County may consider the employment by any Vendor of unauthorized aliens a violation of Section 274A (e) of the INA. Such Violation by the recipient of the Employment Provisions contained in Section 274A (e) of the INA shall be grounds for uni lateral termination of the contract by Collier County. Vendor attests that they are fully compliant with all applicable immigration laws (specifically to the 1986 Immigration Act and subsequent Amendment(s)) and agrees to comply with the provisions of the Memorandum of Understanding with E-Verify and to provide proof of enrollment in The Employment Eligibility Verification System (E-Verify), operated by the Department of Homeland Security in partnership with the Social Security Administration at the time o f submission of the Vendor’s proposal. Company Name ____________________________________________________________________ Print Name Title _______________________ Signature Date _______________________ State of ___________________ County of _________________ The signee of these Affidavit guarantees, as evidenced by the sworn affidavit required herein, the truth and accuracy of this affidavit to interrogatories hereinafter made. Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 92 16.A.21.f Packet Pg. 864 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 6: Vendor Substitute W – 9 Request for Taxpayer Identification Number and Certification In accordance wi th the Internal Revenue Service regulations, Collier County is required to collect the following information for tax reporting purposes from individuals and companies who do business with the County (including social security numbers if used by the individual or company for tax reporting purposes). Florida Statute 119.071(5) requires that the county notify you in wr iting of the reason for collecting this information, which will be used for no other purpose than herein stated. Please complete all information that applies to your business and return with your quote or proposal. 1. General Information (provide all information) Taxpayer Name ________________________________________________________________________________ (as shown on income tax return) Business Name (if different from taxpayer name) Address ____________________________________ City ______________________________________________ State ______________________________________ Zip______________________________________________ Telephone __________________ Email_____________________ Order Information (Must be filled out) Address ___________________________________ Remit / Payment Information (Must be filled out) Address ____________________________________________ City __________ State ________ Zip ___________ City _____________ State _________ Zip______________ Email ____________________________________ Email _____________________________________________ 2. Company Status (check only one) Individual / Sole Proprietor Corporation Partnership Tax Exempt (Federal income tax-exempt entity under Internal Revenue Service guidelines IRC 501 (c) 3) Limited Liability Company Enter the tax classification (D = Disregarded Entity, C = Corporation, P = Partnership) 3. Taxpayer Identification Number (for tax reporting purposes only) Federal Tax Identification Number (TIN) _______________________________________________________________ (Vendors who do not have a TIN, will be required to provide a social security number prior to an award). 4. Sign and Date Form: Certification: Under penalties of perjury, I certify that the information shown on this form is correct to my knowledge. Signature ___________________________________________________________ Date ______________________________ Title _______________________________________________________________ Phone Number ________________________ Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 93 16.A.21.f Packet Pg. 865 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Form 7: Vendor Submittal – Local Vendor Preference Affidavit (Check Appropriate Boxes Below) State of Florida (Select County if Vendor is described as a Local Business) Collier County Lee County Vendor affirms that it is a local business as defined by the Procurement Ordinance of the Collier County Board of County Commissioners and the Regulations Thereto. As defined in Section XV of the Collier County Procurement Ordinance: Local business means the vendor has a current Business Tax Receipt issued by the Collier County Tax Collector prior to bid or proposal submission to do business within Collier County, and that identifies the business with a permanent physical business address located within the limits of Collier County from which the vendor’s staff operates and performs business in an area zoned for the conduct of such business. A Post Office Box or a facility that receives mail, or a non-permanent structure such as a construction trailer, storage shed, or other non- permanent structure shall not be used for the purpose of establishing said physical address. In addition to the foregoing, a vendor shall not be considered a "local business" unless it contributes to the economic development and well-being of Collier County in a verifiable and measurable way. This may include, but not be limited to, the retention and expansion of employment opportunities, support and increase to the County's tax base, and residency of employees and principals of the business within Collier County. Vendors shall affirm in writing their compliance with the foregoing at the time of submitting their bid or proposal to be eligible for consideration as a "local business" under this section. A vendor who misrepresents the Local Preference status of its firm in a proposal or bid submitted to the County will lose the privilege to claim Local Preference status for a period of up to one year under this section. Vendor must complete the following information: Year Business Established in Collier County or Lee County: ________ Number of Employees (Including Owner(s) or Corporate Officers):_________ Number of Employees Living in Collier County or Lee (Including Owner(s) or Corporate Officers):_______ If requested by the County, vendor will be required to provide documentation substantiating the information given in this affidavit. Failure to do so will result in vendor’s submission being deemed not applicable. Vendor Name: _________________________________________ Date: ________________________ Address in Collier or Lee County: _________________________________________________________ Signature: ____________________________________________ Title: ________________________ Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 95 16.A.21.f Packet Pg. 866 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) INSURANCE AND BONDING REQUIREMENTS Insurance / Bond Type Required Limits 1. Worker’s Compensation Statutory Limits of Florida Statutes, Chapter 440 and all Federal Government Statutory Limits and Requirements Evidence of Workers’ Compensation coverage or a Certificate of Exemption issued by the State of Florida is required. Entities that are formed as Sole Proprietorships shall not be required to provide a proof of exemption. An application for exemption can be obtained online at https://apps.fldfs.com/bocexempt/ 2. Employer’s Liability $__500,000______ single limit per occurrence 3. Commercial General Liability (Occurrence Form) patterned after the current ISO form Bodily Injury and Property Damage $__1,000,000___single limit per occurrence, $2,000,000 aggregate for Bodily Injury Liability and Property Damage Liability. This shall include Premises and Operations; Independent Contractors; Products and Completed Operations and Contractual Liability. 4. Indemnification To the maximum extent permitted by Florida law, the Contractor/Vendor shall defend, indemnify and hold harmless Collier County, its officers and employees from any and all liabilities, damages, losses and costs, including, but not limited to, reasonable attorneys’ fees and paralegals’ fees, to the extent caused by the negligence, recklessness, or intentionally wrongful conduct of the Contractor/ Vendor or anyone employed or utilized by the Contractor/Vendor in the performance of this Agreement. 5. Automobile Liability $__1,000,000 Each Occurrence; Bodily Injury & Property Damage, Owned/Non-owned/Hired; Automobile Included 6. Other insurance as noted: Watercraft $ __________ Per Occurrence 7. Bid bond Shall be submitted with proposal response in the form of certified funds, cashiers’ check or an irrevocable letter of credit, a cash bond posted with the County Clerk, or proposal bond in a sum equal to 5% of the cost proposal. All checks shall be made payable to the Collier County Board of County Commissioners on a bank or trust company located in the State of Florida and insured by the Federal Deposit Insurance Corporation. 8. Performance and Payment Bonds For projects in excess of $200,000, bonds shall be submitted with the executed contract by Proposers receiving award, and written for 100% of the Contract award amo unt, the cost borne by the Proposer receiving an award. The Performance and Payment Bonds shall be underwritten by a surety authorized to do business in the State of Florida and otherwise acceptable to Owner; provided, however, the surety shall be rated as “A-“ or better as to general policy holders rating and Class V or higher rating as to financial size category and the amount required shall not exceed 5% of the reported policy holders’ surplus, all as reported in the most current Best Key Rating Guide, published by A.M. Best Company, Inc. of 75 Fulton Street, New York, New York 10038. 9. Vendor shall ensure that all subcontractors comply with the same insurance requirements that he is required to meet. The same Vendor shall provide County with certificates of insurance meeting the required insurance provisions. 10. Collier County must be named as "ADDITIONAL INSURED" on the Insurance Certificate for Commercial General Liability where required. This insurance shall be primary and non-contributory with respect to any other insurance maintained by, or available for the benefit of, the Additional Insured and the Vendor’s policy shall be endorsed accordingly. 11. The Certificate Holder shall be named as Collier County Board of County Commissioners, OR, Board of County Commissioners in Collier County, OR Collier County Government, OR Collier County. The Certificates of Insurance must state the Contract Number, or Project Number, or specific Project description, or must read: For any and all work performed on behalf of Collier County. Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 97 16.A.21.f Packet Pg. 867 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 12. On all certificates, the Certificate Holder must read: Collier County Board of Commissioners, 3295 Tamiami Trail East, Naples, FL 34112 13. Thirty (30) Days Cancellation Notice required. 14. Collier County shall procure and maintain Builders Risk Insurance on all construction projects where it is deemed necessary. Such coverage shall be endorsed to cover the interests of Collier County as well as the Contractor. Premiums shall be billed to the project and the Contractor shall not include Builders Risk premiums in its project proposal or project billings. All questions regarding Builder’s Risk Insurance will be addressed by the Collier County Risk Management Division. 6/21/19 - CC ___________________________________________________________________________________________________________ Vendor’s Insurance Statement We understand the insurance requirements of these specifications and that the evidence of insurability may be required within five (5) days of the award of this solicitation. The insurance submitted must provide coverage for a minimum of six (6) months from the date of award. Name of Firm _______________________________________ Date ____________________________ Vendor Signature _________________________________________________________________________ Print Name _________________________________________________________________________ Insurance Agency _________________________________________________________________________ Agent Name ___________________________________ Telephone Number ________________ Solicitation 19-7607Collier County 6/28/2019 2:43 PM p. 98 16.A.21.f Packet Pg. 868 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / Document Number FEI/EIN Number Date Filed State Status Detail by FEI/EIN Number Florida Profit Corporation EXPRESS SUPPLY, INC. Filing Information P06000110784 20-5497315 08/24/2006 FL ACTIVE Principal Address 632 Gatlin Ave ORLANDO, FL 32806 Changed: 04/12/2016 Mailing Address 632 GATLIN AVENUE ORLANDO, FL 32806 Registered Agent Name & Address SCHULTING, MARK V 632 GATLIN AVENUE ORLANDO, FL 32806 Officer/Director Detail Name & Address Title P SCHULTING, MARK V 632 GATLIN AVENUE ORLANDO, FL 32806 Title VP Merriam, Matt m, VP 632 GATLIN AVENUE ORLANDO, FL 32806 Title S SCHULTING, CARMEN I DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.f Packet Pg. 869 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 632 GATLIN AVENUE ORLANDO, FL 32806 Title T SCHULTING, MARK V 632 GATLIN AVE ORLANDO, FL 32806 Annual Reports Report Year Filed Date 2017 03/19/2017 2018 03/10/2018 2019 05/11/2019 Document Images 05/11/2019 -- ANNUAL REPORT View image in PDF format 03/10/2018 -- ANNUAL REPORT View image in PDF format 03/19/2017 -- ANNUAL REPORT View image in PDF format 04/12/2016 -- ANNUAL REPORT View image in PDF format 03/15/2015 -- ANNUAL REPORT View image in PDF format 04/08/2014 -- ANNUAL REPORT View image in PDF format 04/13/2013 -- ANNUAL REPORT View image in PDF format 01/26/2012 -- ANNUAL REPORT View image in PDF format 04/17/2011 -- ANNUAL REPORT View image in PDF format 02/17/2010 -- ANNUAL REPORT View image in PDF format 04/27/2009 -- ANNUAL REPORT View image in PDF format 07/02/2008 -- ANNUAL REPORT View image in PDF format 04/06/2007 -- ANNUAL REPORT View image in PDF format 08/24/2006 -- Domestic Profit View image in PDF format Florida Department of State, Division of Corporations Page 2 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.f Packet Pg. 870 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 1 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: THE E-VERIFY MEMORANDUM OF UNDERSTANDING FOR EMPLOYERS USING AN E-VERIFY EMPLOYER AGEN T ARTICLE I PURPOSE AND AUTHORITY E-Verify is a program that electronically confirms an employee’s eligibility to work in the United States after completion of Form I-9, Employment Eligibility Verification (Form I-9). This Memorandum of Understanding (MOU) explains certain features of the E-Verify program and describes specific responsibilities of the Employer, the E-Verify Employer Agent, the Social Security Administration (SSA), and DHS. Authority for the E-Verify program is found in Title IV, Subtitle A, of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996 (IIRIRA), Pub. L. 104-208, 110 Stat. 3009, as amended (8 U.S.C. § 1324a note). The Federal Acquisition Regulation (FAR) Subpart 22.18, “Employment Eligibility Verification” and Executive Order 12989, as amended, provide authority for Federal contractors and subcontractors (Federal contractor) to use E-Verify to verify the employment eligibility of certain employees working on Federal contracts. ARTICLE II RESPONSIBILITIES A. RESPONSIBILITIES OF THE EMPLOYER 1.The Employer agrees to display the following notices supplied by DHS in a prominent place that is clearly visible to prospective employees and all employees who are to be verified through the system: a.Notice of E-Verify Participation b.Notice of Right to Work 2.The Employer agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the Employer representatives to be contacted about E-Verify. The Employer also agrees to keep such information current by providing updated information to SSA and DHS whenever the 40133 762199 The parties to this agreement are the Department of Homeland Security (DHS), the EXPRESS SUPPLY INC (Employer), and the E-Verify Employer Agent. The purpose of this agreement is to set forth terms and conditions which the Employer and the E-Verify Employer Agent will follow while participating in E-Verify. 16.A.21.f Packet Pg. 871 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 2 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: representatives’ contact information changes. 3. The Employer shall become familiar with and comply with the most recent version of the E-Verify User Manual. The Employer will obtain the E-Verify User Manual from the E-Verify Employer Agent. 4.The Employer agrees to comply with current Form I-9 procedures, with two exceptions: a.If an employee presents a "List B" identity document, the Employer agrees to only accept "List B" documents that contain a photo. (List B documents identified in 8 C.F.R. 274a.2(b)(1)(B)) can be presented during the Form I-9 process to establish identity.) If an employee objects to the photo requirement for religious reasons, the Employer should contact E-Verify at 1-888-464-4218. b.If an employee presents a DHS Form I-551 (Permanent Resident Card), Form I-766 (Employment Authorization Document), or U.S. Passport or Passport Card to complete I-Form I-9, the Employer agrees to make a photocopy of the document and to retain the photocopy with the employee’s Form I-9. The Employer will use the photocopy to verify the photo and to assist DHS with its review of photo mismatches that employees contest. DHS may in the future designate other documents that activate the photo screening tool. Note: Subject only to the exceptions noted previously in this paragraph, employees still retain the right to present any List A, or List B and List C, document(s) to complete the Form I-9. 5.The Employer agrees to record the case verification number on the employee's Form I-9 or to print the screen containing the case verification number and attach it to the employee's Form I-9. 6.The Employer agrees that, although it participates in E-Verify, the Employer has a responsibility to complete, retain, and make available for inspection Forms I-9 that relate to its employees, or from other requirements of applicable regulations or laws, including the obligation to comply with the antidiscrimination requirements of section 274B of the INA with respect to Form I-9 procedures. a.The following modified requirements are the only exceptions to an Employer’s obligation to not employ unauthorized workers and comply with the anti-discrimination provision of the INA: (1) List B identity documents must have photos, as described in paragraph 5 above; (2) When an Employer confirms the identity and employment eligibility of newly hired employee using E-Verify procedures, the Employer establishes a rebuttable presumption that it has not violated section 274A(a)(1)(A) of the Immigration and Nationality Act (INA) with respect to the hiring of that employee; (3) If the Employer receives a final nonconfirmation for an employee, but continues to employ that person, the Employer must notify DHS and the Employer is subject to a civil money penalty between $550 and $1,100 for each failure to notify DHS of continued employment following a final nonconfirmation; (4) If the Employer continues to employ an employee after receiving a final nonconfirmation, then the Employer is subject to a rebuttable presumption that it has knowingly employed an unauthorized alien in violation of section 274A(a)(1)(A); and (5) no E-Verify participant is civilly or criminally liable under any law for any action taken in good faith based on information provided through the E-Verify. b.DHS reserves the right to conduct Form I-9 compliance inspections, as well as any other enforcement or compliance activity authorized by law, including site visits, to ensure proper use of E-Verify. 40133 762199 16.A.21.f Packet Pg. 872 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 3 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: 7.The Employer is strictly prohibited from creating an E-Verify case before the employee has been hired, meaning that a firm offer of employment was extended and accepted and Form I-9 was completed. The Employer agrees to create an E-Verify case for new employees within three Employer business days after each employee has been hired (after both Sections 1 and 2 of Form I-9 have been completed), and to complete as many steps of the E-Verify process as are necessary according to the E-Verify User Manual. If E-Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the Employer's attempting, in good faith, to make inquiries during the period of unavailability. 8.The Employer agrees not to use E-Verify for pre-employment screening of job applicants, in support of any unlawful employment practice, or for any other use that this MOU or the E-Verify User Manual does not authorize. 9.The Employer must use E-Verify (through its E-Verify Employer Agent) for all new employees. The Employer will not verify selectively and will not verify employees hired before the effective date of this MOU. Employers who are Federal contractors may qualify for exceptions to this requirement as described in Article II.B of this MOU. 10.The Employer agrees to follow appropriate procedures (see Article III below) regarding tentative nonconfirmations. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. Further, when employees contest a tentative nonconfirmation based upon a photo mismatch, the Employer must take additional steps (see Article III.B below) to contact DHS with information necessary to resolve the challenge. 11.The Employer agrees not to take any adverse action against an employee based upon the employee's perceived employment eligibility status while SSA or DHS is processing the verification request unless the Employer obtains knowledge (as defined in 8 C.F.R. § 274a.1(l)) that the employee is not work authorized. The Employer understands that an initial inability of the SSA or DHS automated verification system to verify work authorization, a tentative nonconfirmation, a case in continuance (indicating the need for additional time for the government to resolve a case), or the finding of a photo mismatch, does not establish, and should not be interpreted as, evidence that the employee is not work authorized. In any of such cases, the employee must be provided a full and fair opportunity to contest the finding, and if he or she does so, the employee may not be terminated or suffer any adverse employment consequences based upon the employee’s perceived employment eligibility status (including denying, reducing, or extending work hours, delaying or preventing training, requiring an employee to work in poorer conditions, withholding pay, refusing to assign the employee to a Federal contract or other assignment, or otherwise assuming that he or she is unauthorized to work) until and unless secondary verification by SSA or DHS has been completed and a final nonconfirmation has been issued. If the employee does not choose to contest a tentative nonconfirmation or a photo mismatch or if a secondary verification is completed and a final nonconfirmation is issued, then the Employer can find the employee is not work authorized and terminate the employee’s employment. 40133 762199 16.A.21.f Packet Pg. 873 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 4 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: Employers or employees with questions about a final nonconfirmation may call E-Verify at 1-888-464- 4218 (customer service) or 1-888-897-7781 (worker hotline). 12.The Employer agrees to comply with Title VII of the Civil Rights Act of 1964 and section 274B of the INA as applicable by not discriminating unlawfully against any individual in hiring, firing, employment eligibility verification, or recruitment or referral practices because of his or her national origin or citizenship status, or by committing discriminatory documentary practices. The Employer understands that such illegal practices can include selective verification or use of E-Verify except as provided in part D below, or discharging or refusing to hire employees because they appear or sound “foreign” or have received tentative nonconfirmations. The Employer further understands that any violation of the immigration-related unfair employment practices provisions in section 274B of the INA could subject the Employer to civil penalties, back pay awards, and other sanctions, and violations of Title VII could subject the Employer to back pay awards, compensatory and punitive damages. Violations of either section 274B of the INA or Title VII may also lead to the termination of its participation in E-Verify. If the Employer has any questions relating to the anti-discrimination provision, it should contact OSC at 1-800-255-8155 or 1-800-237-2515 (TDD). 13.The Employer agrees that it will use the information it receives from E-Verify (through its E-Verify Employer Agent) only to confirm the employment eligibility of employees as authorized by this MOU. The Employer agrees that it will safeguard this information, and means of access to it (such as PINS and passwords), to ensure that it is not used for any other purpose and as necessary to protect its confidentiality, including ensuring that it is not disseminated to any person other than employees of the Employer who are authorized to perform the Employer's responsibilities under this MOU, except for such dissemination as may be authorized in advance by SSA or DHS for legitimate purposes. 14.The Employer agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email a E-Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 15.The Employer acknowledges that the information it receives through the E-Verify Employer Agent from SSA is governed by the Privacy Act (5 U.S.C. § 552a(i)(1) and (3)) and the Social Security Act (42 U.S.C. 1306(a)). Any person who obtains this information under false pretenses or uses it for any purpose other than as provided for in this MOU may be subject to criminal penalties. 16.The Employer agrees to cooperate with DHS and SSA in their compliance monitoring and evaluation of E-Verify (whether directly or through their E-Verify Employer Agent), which includes permitting DHS, SSA, their contractors and other agents, upon reasonable notice, to review Forms I-9 and other employment records and to interview it and its employees regarding the Employer’s use of E- Verify, and to respond in a prompt and accurate manner to DHS requests for information relating to their participation in E-Verify. 17.The Employer shall not make any false or unauthorized claims or references about its participation in E-Verify on its website, in advertising materials, or other media. The Employer shall not describe its services as federally-approved, federally-certified, or federally-recognized, or use language with a 40133 762199 16.A.21.f Packet Pg. 874 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 5 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify services and any claim to that effect is false. 18.The Employer shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the prior written consent of DHS. 19.The Employer agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see M-795 (Web)) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the Employer’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 20.The Employer understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the Employer may be subject to appropriate legal action and termination of its participation in E-Verify according to this MOU. 21.The Employer agrees that it will notify its E-Verify Employer Agent immediately if it is awarded a federal contract with the FAR clause. Your E-Verify Employer Agent needs this information so that it can update your company’s E-Verify profile within 30 days of the contract award date. B. RESPONSIBILITIES OF E-VERIFY EMPLOYER AGENT 1. The E-Verify Employer Agent agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the E-Verify Employer Agent representatives who will be accessing information under E-Verify and shall update them as needed to keep them current. 2. The E-Verify Employer Agent agrees to become familiar with and comply with the E-Verify User Manual and provide a copy of the most current version of the E-Verify User Manual to the Employer so that the Employer can become familiar with and comply with E-Verify policy and procedures. The E-Verify Employer Agent agrees to obtain a revised E-Verify User Manual as it becomes available and to provide a copy of the revised version to the Employer no later than 30 days after the manual becomes available. 3.The E-Verify Employer Agent agrees that any person accessing E-Verify on its behalf is trained on the most recent E-Verify policy and procedures. 4. The E-Verify Employer Agent agrees that any E-Verify Employer Agent Representative who will perform employment verification cases will complete the E-Verify Tutorial before that individual initiates any cases. a. The E-Verify Employer Agent agrees that all E-Verify Employer Agent representatives will take the refresher tutorials initiated by the E-Verify program as a condition of continued use of E-Verify, including any tutorials for Federal contractors, if any of the Employers represented by the E-Verify Employer Agent is a Federal contractor. b. Failure to complete a refresher tutorial will prevent the E-Verify Employer Agent and Employer from continued use of E-Verify. 5.The E-Verify Employer Agent agrees to grant E-Verify access only to current employees who need 40133 762199 16.A.21.f Packet Pg. 875 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 6 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: E-Verify access. The E-Verify Employer Agent must promptly terminate an employee’s E-Verify access if the employee is separated from the company or no longer needs access to E-Verify. 6. The E-Verify Employer Agent agrees to obtain the necessary equipment to use E- Verify as required by the E-Verify rules and regulations as modified from time to time. 7.The E-Verify Employer Agent agrees to, consistent with applicable laws, regulations, and policies, commit sufficient personnel and resources to meet the requirements of this MOU. 8.The E-Verify Employer Agent agrees to provide its clients with training on E-Verify processes, policies, and procedures. The E-Verify Employer Agent also agrees to provide its clients with ongoing E-Verify training as needed. E-Verify is not responsible for providing training to clients of E-Verify Employer Agents. 9. The E-Verify Employer Agent agrees to provide the Employer with the notices described in Article II.B.1 below. 10. The E-Verify Employer Agent agrees to create E-Verify cases for the Employer it represents in accordance with the E-Verify Manual, the E-Verify Web-Based Tutorial and all other published E-Verify rules and procedures. The E-Verify Employer Agent will create E-Verify cases using information provided by the Employer and will immediately communicate the response back to the Employer. If E-Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the E-Verify Employer Agent’s attempting, in good faith, to make inquiries on behalf of the Employer during the period of unavailability 11.When the E-Verify Employer Agent receives notice from a client company that it has received a contract with the FAR clause, then the E-Verify Employer Agent must update the company’s E-Verify profile within 30 days of the contract award date. 12.If data is transmitted between the E-Verify Employer Agent and its client, then the E-Verify Employer Agent agrees to protect personally identifiable information during transmission to and from the E-Verify Employer Agent. 13.The E-Verify Employer Agent agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email at E-Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 14. The E-Verify Employer Agent agrees to fully cooperate with DHS and SSA in their compliance monitoring and evaluation of E-Verify, including permitting DHS, SSA, their contractors and other agents, upon reasonable notice, to review Forms I-9, employment records, and all records pertaining to the E-Verify Employer Agent’s use of E-Verify, and to interview it and its employees regarding the use of E-Verify, and to respond in a timely and accurate manner to DHS requests for information relating to their participation in E-Verify. 15.The E-Verify Employer Agent shall not make any false or unauthorized claims or references about 40133 762199 16.A.21.f Packet Pg. 876 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 7 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: its participation in E-Verify on its website, in advertising materials, or other media. The E-Verify Employer Agent shall not describe its services as federally-approved, federally-certified, or federally- recognized, or use language with a similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify Employer Agent services and any claim to that effect is false. 16.The E-Verify Employer Agent shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the prior written consent of DHS. 17.The E-Verify Employer Agent agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see M-795 (Web)) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the E-Verify Employer Agent’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 18.The E-Verify Employer Agent understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the E-Verify Employer Agent may be subject to appropriate legal action and termination of its participation in E-Verify according to this MOU. C. RESPONSIBILITIES OF FEDERAL CONTRACTORS The E-Verify Employer Agent shall ensure that the E-Verify Employer Agent and the Employers represented by the E-Verify Employer Agent carry out the following responsibilities if the Employer is a Federal contractor or becomes a federal contractor. The E-Verify Employer Agent should instruct the client to keep the E-Verify Employer Agent informed about any changes or updates related to federal contracts. It is the E-Verify Employer Agent’s responsibility to ensure that its clients are in compliance with all E-Verify policies and procedures. 1.If the Employer is a Federal contractor with the FAR E-Verify clause subject to the employment verification terms in Subpart 22.18 of the FAR, it will become familiar with and comply with the most current version of the E-Verify User Manual for Federal Contractors as well as the E-Verify Supplemental Guide for Federal Contractors. 2.In addition to the responsibilities of every employer outlined in this MOU, the Employer understands that if it is a Federal contractor subject to the employment verification terms in Subpart 22.18 of the FAR it must verify the employment eligibility of any “employee assigned to the contract” (as defined in FAR 22.1801). Once an employee has been verified through E-Verify by the Employer, the Employer may not reverify the employee through E-Verify. a.An Employer that is not enrolled in E-Verify as a Federal contractor at the time of a contract award must enroll as a Federal contractor in the E-Verify program within 30 calendar days of contract award and, within 90 days of enrollment, begin to verify employment eligibility of new hires using E-Verify. The Employer must verify those employees who are working in the United States, whether or not they are assigned to the contract. Once the Employer begins verifying new hires, such verification of new hires must be initiated within three business days after the hire date. Once enrolled in E-Verify as a Federal contractor, the Employer must begin verification of employees 40133 762199 16.A.21.f Packet Pg. 877 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 8 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. b.Employers enrolled in E-Verify as a Federal contractor for 90 days or more at the time of a contract award must use E-Verify to begin verification of employment eligibility for new hires of the Employer who are working in the United States, whether or not assigned to the contract, within three business days after the date of hire. If the Employer is enrolled in E-Verify as a Federal contractor for 90 calendar days or less at the time of contract award, the Employer must, within 90 days of enrollment, begin to use E-Verify to initiate verification of new hires of the contractor who are working in the United States, whether or not assigned to the contract. Such verification of new hires must be initiated within three business days after the date of hire. An Employer enrolled as a Federal contractor in E-Verify must begin verification of each employee assigned to the contract within 90 calendar days after date of contract award or within 30 days after assignment to the contract, whichever is later. c.Federal contractors that are institutions of higher education (as defined at 20 U.S.C. 1001(a)), state or local governments, governments of Federally recognized Indian tribes, or sureties performing under a takeover agreement entered into with a Federal agency under a performance bond may choose to only verify new and existing employees assigned to the Federal contract. Such Federal contractors may, however, elect to verify all new hires, and/or all existing employees hired after November 6, 1986. Employers in this category must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. d.Upon enrollment, Employers who are Federal contractors may elect to verify employment eligibility of all existing employees working in the United States who were hired after November 6, 1986, instead of verifying only those employees assigned to a covered Federal contract. After enrollment, Employers must elect to verify existing staff following DHS procedures and begin E-Verify verification of all existing employees within 180 days after the election. e.The Employer may use a previously completed Form I-9 as the basis for creating an E-Verify case for an employee assigned to a contract as long as: i.That Form I-9 is complete (including the SSN) and complies with Article II.A.6, ii.The employee’s work authorization has not expired, and iii.The Employer has reviewed the information reflected in the Form I-9 either in person or in communications with the employee to ensure that the employee’s Section 1, Form I-9 attestation has not changed (including, but not limited to, a lawful permanent resident alien having become a naturalized U.S. citizen). f.The Employer shall complete a new Form I-9 consistent with Article II.A.6 or update the previous Form I-9 to provide the necessary information if: i.The Employer cannot determine that Form I-9 complies with Article II.A.6, ii.The employee’s basis for work authorization as attested in Section 1 has expired or changed, or iii.The Form I-9 contains no SSN or is otherwise incomplete. 40133 762199 16.A.21.f Packet Pg. 878 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 9 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: Note: If Section 1 of Form I-9 is otherwise valid and up-to-date and the form otherwise complies with Article II.C.5, but reflects documentation (such as a U.S. passport or Form I-551) that expired after completing Form I-9, the Employer shall not require the production of additional documentation, or use the photo screening tool described in Article II.A.5, subject to any additional or superseding instructions that may be provided on this subject in the E-Verify User Manual. g.The Employer agrees not to require a second verification using E-Verify of any assigned employee who has previously been verified as a newly hired employee under this MOU or to authorize verification of any existing employee by any Employer that is not a Federal contractor based on this Article. 3.The Employer understands that if it is a Federal contractor, its compliance with this MOU is a performance requirement under the terms of the Federal contract or subcontract, and the Employer consents to the release of information relating to compliance with its verification responsibilities under this MOU to contracting officers or other officials authorized to review the Employer’s compliance with Federal contracting requirements. D. RESPONSIBILITIES OF SSA 1.SSA agrees to allow DHS to compare data provided by the Employer (through the E-Verify Employer Agent) against SSA’s database. SSA sends DHS confirmation that the data sent either matches or does not match the information in SSA’s database. 2.SSA agrees to safeguard the information the Employer provides (through the E-Verify Employer Agent) through E-Verify procedures. SSA also agrees to limit access to such information, as is appropriate by law, to individuals responsible for the verification of Social Security numbers or responsible for evaluation of E-Verify or such other persons or entities who may be authorized by SSA as governed by the Privacy Act (5 U.S.C. § 552a), the Social Security Act (42 U.S.C. 1306(a)), and SSA regulations (20 CFR Part 401). 3.SSA agrees to provide case results from its database within three Federal Government work days of the initial inquiry. E-Verify provides the information to the E-Verify Employer Agent. 4.SSA agrees to update SSA records as necessary if the employee who contests the SSA tentative nonconfirmation visits an SSA field office and provides the required evidence. If the employee visits an SSA field office within the eight Federal Government work days from the date of referral to SSA, SSA agrees to update SSA records, if appropriate, within the eight-day period unless SSA determines that more than eight days may be necessary. In such cases, SSA will provide additional instructions to the employee. If the employee does not visit SSA in the time allowed, E-Verify may provide a final nonconfirmation to the E-Verify Employer Agent. Note: If an Employer experiences technical problems, or has a policy question, the employer should contact E-Verify at 1-888-464-4218. E. RESPONSIBILITIES OF DHS 1.DHS agrees to provide the Employer with selected data from DHS databases to enable the Employer (through the E-Verify Employer Agent) to conduct, to the extent authorized by this MOU: 40133 762199 16.A.21.f Packet Pg. 879 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 10 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: a.Automated verification checks on alien employees by electronic means, and b.Photo verification checks (when available) on employees. 2.DHS agrees to assist the E-Verify Employer Agent with operational problems associated with its participation in E-Verify. DHS agrees to provide the E-Verify Employer Agent names, titles, addresses, and telephone numbers of DHS representatives to be contacted during the E-Verify process. 3.DHS agrees to provide to the E-Verify Employer Agent with access to E-Verify training materials as well as an E-Verify User Manual that contain instructions on E-Verify policies, procedures, and requirements for both SSA and DHS, including restrictions on the use of E-Verify. 4.DHS agrees to train E-Verify Employer Agents on all important changes made to E-Verify through the use of mandatory refresher tutorials and updates to the E-Verify User Manual. Even without changes to E-Verify, DHS reserves the right to require E-Verify Employer Agents to take mandatory refresher tutorials. 5.DHS agrees to provide to the Employer (through the E-Verify Employer Agent) a notice, which indicates the Employer's participation in E-Verify. DHS also agrees to provide to the Employer anti- discrimination notices issued by the Office of Special Counsel for Immigration-Related Unfair Employment Practices (OSC), Civil Rights Division, U.S. Department of Justice. 6.DHS agrees to issue each of the E-Verify Employer Agent’s E-Verify users a unique user identification number and password that permits them to log in to E-Verify. 7.HS agrees to safeguard the information the Employer provides (through the E-Verify Employer Agent), and to limit access to such information to individuals responsible for the verification process, for evaluation of E-Verify, or to such other persons or entities as may be authorized by applicable law. Information will be used only to verify the accuracy of Social Security numbers and employment eligibility, to enforce the INA and Federal criminal laws, and to administer Federal contracting requirements. 8.DHS agrees to provide a means of automated verification that provides (in conjunction with SSA verification procedures) confirmation or tentative nonconfirmation of employees' employment eligibility within three Federal Government work days of the initial inquiry. 9.DHS agrees to provide a means of secondary verification (including updating DHS records) for employees who contest DHS tentative nonconfirmations and photo mismatch tentative nonconfirmations. This provides final confirmation or nonconfirmation of the employees' employment eligibility within 10 Federal Government work days of the date of referral to DHS, unless DHS determines that more than 10 days may be necessary. In such cases, DHS will provide additional verification instructions. 40133 762199 16.A.21.f Packet Pg. 880 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 11 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: ARTICLE III REFERRAL OF INDIVIDUALS TO SSA AND DHS A. REFERRAL TO SSA 1. If the Employer receives a tentative nonconfirmation issued by SSA, the Employer must print the notice as directed by E-Verify. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. After a tentative nonconfirmation, the Employer will refer employees to SSA field offices only as directed by E-Verify. The Employer must record the case verification number, review the employee information submitted to E-Verify to identify any errors, and find out whether the employee contests the tentative nonconfirmation. The Employer will transmit the Social Security number, or any other corrected employee information that SSA requests, to SSA for verification again if this review indicates a need to do so. 4. The Employer will instruct the employee to visit an SSA office within eight Federal Government work days. SSA will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 5. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. 6. The Employer agrees not to ask the employee to obtain a printout from the Social Security Administration number database (the Numident) or other written verification of the SSN from the SSA. B. REFERRAL TO DHS 1. If the Employer receives a tentative nonconfirmation issued by DHS, the Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative 40133 762199 16.A.21.f Packet Pg. 881 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 12 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: nonconfirmation. 3. The Employer agrees to refer individuals to DHS only when the employee chooses to contest a tentative nonconfirmation. 4. If the employee contests a tentative nonconfirmation issued by DHS, the Employer will instruct the employee to contact DHS through its toll-free hotline (as found on the referral letter) within eight Federal Government work days. 5. If the Employer finds a photo mismatch, the Employer must provide the photo mismatch tentative nonconfirmation notice and follow the instructions outlined in paragraph 1 of this section for tentative nonconfirmations, generally. 6. The Employer agrees that if an employee contests a tentative nonconfirmation based upon a photo mismatch, the Employer will send a copy of the employee’s Form I-551, Form I-766, U.S. Passport, or passport card to DHS for review by: a. Scanning and uploading the document, or b. Sending a photocopy of the document by express mail (furnished and paid for by the employer). 7. The Employer understands that if it cannot determine whether there is a photo match/mismatch, the Employer must forward the employee’s documentation to DHS as described in the preceding paragraph. The Employer agrees to resolve the case as specified by the DHS representative who will determine the photo match or mismatch. 8. DHS will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 9. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. ARTICLE IV SERVICE PROVISIONS A. NO SERVICE FEES 1. SSA and DHS will not charge the Employer for verification services performed under this MOU. The Employer is responsible for providing equipment needed to make inquiries. To access E-Verify, an Employer will need a personal computer with Internet access. ARTICLE V MODIFICATION AND TERMINATION A. MODIFICATION 1. This MOU is effective upon the signature of all parties and shall continue in effect for as long as the SSA and DHS operates the E-Verify program unless modified in writing by the mutual consent of all parties. 40133 762199 16.A.21.f Packet Pg. 882 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 13 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: 2. Any and all E-Verify system enhancements by DHS or SSA, including but not limited to E-Verify checking against additional data sources and instituting new verification policies or procedures, will be covered under this MOU and will not cause the need for a supplemental MOU that outlines these changes. B. TERMINATION 1. The Employer may terminate this MOU and its participation in E-Verify at any time upon 30 days prior written notice to the other parties. In addition, any Employer represented by the E-Verify Employer Agent may voluntarily terminate this MOU upon giving DHS 30 days’ written notice. 2. Notwithstanding Article V, part A of this MOU, DHS may terminate this MOU, and thereby the Employer’s participation in E-Verify, with or without notice at any time if deemed necessary because of the requirements of law or policy, or upon a determination by SSA or DHS that there has been a breach of system integrity or security by the Employer, or a failure on the part of the Employer to comply with established E-Verify procedures and/or legal requirements. The Employer understands that if it is a Federal contractor, termination of this MOU by any party for any reason may negatively affect the performance of its contractual responsibilities. Similarly, the Employer understands that if it is in a state where E-Verify is mandatory, termination of this by any party MOU may negatively affect the Employer’s business. 3. An Employer that is a Federal contractor may terminate this MOU when the Federal contract that requires its participation in E-Verify is terminated or completed. In such cases, the Federal contractor must provide written notice to DHS. If an Employer that is a Federal contractor fails to provide such notice, then that Employer will remain an E-Verify participant, will remain bound by the terms of this MOU that apply to non-Federal contractor participants, and will be required to use the E-Verify procedures to verify the employment eligibility of all newly hired employees. 4. The Employer agrees that E-Verify is not liable for any losses, financial or otherwise, if the Employer is terminated from E-Verify. 5. Upon termination of the relationship between an Employer and their E-Verify Employer Agent, E-Verify cannot provide the Employer with its records. The Employer agrees to seek its records from the E-Verify Employer Agent. ARTICLE VI PARTIES A. Some or all SSA and DHS responsibilities under this MOU may be performed by contractor(s), and SSA and DHS may adjust verification responsibilities between each other as necessary. By separate agreement with DHS, SSA has agreed to perform its responsibilities as described in this MOU. B. Nothing in this MOU is intended, or should be construed, to create any right or benefit, substantive or procedural, enforceable at law by any third party against the United States, its agencies, officers, or employees, or against the Employer, its agents, officers, or employees. C. The Employer may not assign, directly or indirectly, whether by operation of law, change of control or merger, all or any part of its rights or obligations under this MOU without the prior written consent of 40133 762199 16.A.21.f Packet Pg. 883 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 14 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: DHS, which consent shall not be unreasonably withheld or delayed. Any attempt to sublicense, assign, or transfer any of the rights, duties, or obligations herein is void. D. Each party shall be solely responsible for defending any claim or action against it arising out of or related to E-Verify or this MOU, whether civil or criminal, and for any liability wherefrom, including (but not limited to) any dispute between the Employer and any other person or entity regarding the applicability of Section 403(d) of IIRIRA to any action taken or allegedly taken by the Employer. E. The Employer understands that its participation in E-Verify is not confidential information and may be disclosed as authorized or required by law and DHS or SSA policy, including but not limited to, Congressional oversight, E-Verify publicity and media inquiries, determinations of compliance with Federal contractual requirements, and responses to inquiries under the Freedom of Information Act (FOIA). F. The individuals whose signatures appear below represent that they are authorized to enter into this MOU on behalf of the Employer, the E-Verify Employer Agent, and DHS respectively. The Employer understands that any inaccurate statement, representation, data or other information provided to DHS may subject the Employer, its subcontractors, its employees, or its representatives to: (1) prosecution for false statements pursuant to 18 U.S.C. 1001 and/or; (2) immediate termination of its MOU and/or; (3) possible debarment or suspension. 40133 762199 G. The foregoing constitutes the full agreement on this subject between DHS, the Employer, and the E-Verify Employer Agent. EXPRESS SUPPLY INC (Employer) hereby designates and appoints Verify I-9, LLC (E- Verify Employer Agent), including its officers and employees, as the E-Verify Employer Agent for the purpose of carrying out (Employer) responsibilities under the MOU between the Employer, the E-Verify Employer Agent, and DHS. 16.A.21.f Packet Pg. 884 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 15 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: If you have any questions, contact E-Verify at 1-888-464-4218. Approved by: Employer Name (Please Type or Print) Title Signature Date E-Verify Employer Agent Name (Please Type or Print) Title Signature Date Department of Homeland Security – Verification Division Name (Please Type or Print) Title Signature Date 40133 762199 EXPRESS SUPPLY INC Verify I-9, LLC Robert L Griggs Electronically Signed 03/07/2014 USCIS Verification Division Electronically Signed 03/07/2014 16.A.21.f Packet Pg. 885 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 16 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number:Client Company ID Number: Information Required for the E-Verify Program Information relating to your Company: Company Name Company Facility Address Company Alternate Address County or Parish Employer Identification Number North American Industry Classification Systems Code Parent Company Number of Employees Number of Sites Verified for 40133 762199 EXPRESS SUPPLY INC 632 GATLIN AVENUE ORLANDO, FL 32806 ORANGE 205497315 423 1 to 4 1 16.A.21.f Packet Pg. 886 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 17 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: Are you verifying for more than 1 site? If yes, please provide the number of sites verified for in each State: 40133 762199 FLORIDA 1 site(s) 16.A.21.f Packet Pg. 887 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 18 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: Information relating to the Program Administrator(s) for your Company on policy questions or operational problems: 40133 762199 Name MARK SCHULTING Phone Number (407) 497 - 8614 Fax Number Email Address mschulting@expresssupply.net 16.A.21.f Packet Pg. 888 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 19 of 19 E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 Company ID Number: Client Company ID Number: 40133 762199 Page intentionally left blank 16.A.21.f Packet Pg. 889 Attachment: 19-7607 Express Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 11/5/2019 Setnor Byer Insurance & Risk 900 S. Pine Island Road #300 Plantation FL 33324 Tracy Brahm (954)382-4350 (954)382-2810 certificates@setnorbyer.com Express Supply, Inc 632 Gatlin Avenue Orlando FL 32806 Hartford Casualty Insurance Company 29424 2019_0603_MasterAI A X X X X 21SBMZI0839 7/8/2019 7/8/2020 1,000,000 300,000 10,000 1,000,000 2,000,000 2,000,000 A X X 21SBMZI0839 7/8/2019 7/8/2020 1,000,000 General Liability: Additional Insured per form SS00080405, when required by written contract; Primary Non-Contributory per form SS00080405, when required by written contract; Waiver of Subrogation per form SS00080405, when required by written contract. Per Florida Statute 45 day Notice of Cancellation except in the event of nonpayment of premium, then 10 day notice. All of the above are subject to policy terms, limitations, exclusions and conditions. Collier County Board of County Commissioners 3295 Tamiami Trail E. Naples, FL 34112 Tracy Brahm/TLK The ACORD name and logo are registered marks of ACORD CERTIFICATE HOLDER ©1988-2014 ACORD CORPORATION.All rights reserved. ACORD 25 (2014/01) AUTHORIZED REPRESENTATIVE CANCELLATION DATE (MM/DD/YYYY)CERTIFICATE OF LIABILITY INSURANCE LOCJECTPRO-POLICY GEN'L AGGREGATE LIMIT APPLIES PER: OCCURCLAIMS-MADE COMMERCIAL GENERAL LIABILITY PREMISES (Ea occurrence)$DAMAGE TO RENTED EACH OCCURRENCE $ MED EXP (Any one person)$ PERSONAL &ADV INJURY $ GENERAL AGGREGATE $ PRODUCTS - COMP/OP AGG $ $RETENTIONDED CLAIMS-MADE OCCUR $ AGGREGATE $ EACH OCCURRENCE $UMBRELLA LIAB EXCESS LIAB DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) INSRLTR TYPE OF INSURANCE POLICY NUMBER POLICY EFF(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)LIMITS PER STATUTE OTH- ER E.L.EACH ACCIDENT E.L. DISEASE - EA EMPLOYEE E.L. DISEASE - POLICY LIMIT $ $ $ ANY PROPRIETOR/PARTNER/EXECUTIVE If yes,describe under DESCRIPTION OF OPERATIONS below (Mandatory in NH) OFFICER/MEMBER EXCLUDED? WORKERS COMPENSATION AND EMPLOYERS' LIABILITY Y / N AUTOMOBILE LIABILITY ANY AUTO ALL OWNED SCHEDULED HIRED AUTOS NON-OWNED AUTOS AUTOS AUTOS COMBINED SINGLE LIMIT BODILY INJURY (Per person) BODILY INJURY (Per accident) PROPERTY DAMAGE $ $ $ $ THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSD ADDL WVD SUBR N / A $ $ (Ea accident) (Per accident) OTHER: THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: INSURED PHONE(A/C, No, Ext): PRODUCER ADDRESS: E-MAIL FAX (A/C, No): CONTACTNAME: NAIC # INSURER A : INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : INSURER(S)AFFORDING COVERAGE SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INS025 (201401) 16.A.21.g Packet Pg. 890 Attachment: 19-7607 Express_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) The foregoing statements apply to Collier County Board of County Commissioners, OR Board of County Commissioners in Collier County, OR Collier County Government OR Collier County "for any and all work performed on behalf Collier County". COMMENTS/REMARKS COPYRIGHT 2000, AMS SERVICES INC.OFREMARK 16.A.21.g Packet Pg. 891 Attachment: 19-7607 Express_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) EFFECTIVE DATE: PERSON: BUSINESS NAME AND ADDRESS: SCOPE OF BUSINESS OR TRADE: MARK V SCHULTING EXPRESS SUPPLY, INC. 632 GATLIN AV ORLANDO, FL 32806 FEIN: JIMMY PATRONIS CHIEF FINANICAL OFFICER STATE OF FLORIDA DEPARTMENT OF FINANCIAL SERVICES DIVISION OF WORKERS' COMPENSATION * * CERTIFICATE OF ELECTION TO BE EXEMPT FROM FLORIDA WORKERS' COMPENSATION LAW * * IMPORTANT: Pursuant to Chapter 440.05(14), F.S., an officer of a corporation who elects exemption from this chapter by filing a certificate of election under this section may not recover benefits or compensation under this chapter. Pursuant to Chapter 440.05(12), F.S., Certificates of election to be exempt... apply only within the scope of the business or trade listed on the notice of election to be exempt. Pursuant to Chapter 440.05(13), F.S., Notices of election to be exempt and certificates of election to be exempt shall be subject to revocation if, at any time after the filing of the notice or the issuance of the certificate, the person named on the notice or certificate no longer meets the requirements of this section for issuance of a certificate. The department shall revoke a certificate at any time for failure of the person named on the certificate to meet the requirements of this section. DFS-F2-DWC-252 CERTIFICATE OF ELECTION TO BE EXEMPT REVISED 08-13 QUESTIONS? (850)413-1609 Electronic EquipmentInstallation, Service or RepairShop and Outside & Drivers NON-CONSTRUCTION INDUSTRY EXEMPTION 2/27/2018 EXPIRATION DATE:2/27/2020 205497315 EMAIL:MSCHULTING@EXPRESSSUPPLY.NET This certifies that the individual listed below has elected to be exempt from Florida Workers' Compensation law. 16.A.21.h Packet Pg. 892 Attachment: 19-7607 Express_WC Exemption (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 893 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 894 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 895 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 896 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 897 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 898 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 899 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 900 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 901 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 902 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 903 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6220 Trailwood Drive, Suite 200, Plano, TX 75024 • Tel: 214-755-8169 • Fax: 972-370-2440 • www.itsplus3.com Camera With BNC-less Connector "Lightning Series" Analog/Digital Camera with OMT • Higher Performance Than Traditional VIVDS Cameras - OMT Provides Thermal Camera Like Performance - BNC Less Connector Option: 15 Seconds to Install - Advanced Surge Protection - 20x Digital Zoom - “Never Clean” Lens - Rated to 140 mph - Superior Performance and Reliability • Keeps semiconductors 50F cooler • ISO9001:2000 Certification • Exceeds NEMA TS2 Cabinet Specifications • 3 Year Warranty - Lowest Power: 1.4 W - Lowest Weight: 2 lbs - Interoperable With All Major VIVDS Suppliers - Total Cost of Ownership: 3x Less Than Traditional Cameras Analog and Digital Outputs Coupled with Optical Mask Technology (OMT) ITS Plus’ multi-patented 7th generation camera combines both analog and HD digital video outputs into a single device. Designed to work with current analog VIVDS detection cards as well as ITS Plus's next generation digital VIVDS cards. It is one camera that does it all. Optical Mask Technology blocks bright light sources (sun, vehicle hi beams, glare) while producing high contrast "edges" on moving vehicles. Outperforms thermal cameras at every turn. The combination increases vehicle detection performance while improving ease of set up. A BNC less connector system means cutting installation time in half. The innovative camera architecture virtually eliminates the need for lens cleaning and re-alignment even under the harshest conditions. Connector failure, power supply failure and water leakage are also virtually eliminated. Upgrade Your VIVDS System Simply by Upgrading Your Camera The combination of a sharper single lens camera, “never clean” lens cover and OMT improves the performance of any VIVDS system. Designed to be interoperable with all the major VIVDS suppliers an agency can upgrade the performance of their intersection by simply adding the ITS Plus camera. Applications include stop bar/advanced detection, speed, occupancy, vehicle/bicycle counting and adaptive control. Morning Glare Washing Out FOV OMT Blocks the Glare From Sky/Sun While Generating “Edges” on the Vehicles 16.A.21.i Packet Pg. 904 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6220 Trailwood Drive, Suite 200, Plano, TX 75024 • Tel: 214-755-8169 • Fax: 972-370-2440 • www.itsplus3.com "Lightning Series" Analog/Digital Camera with OMT Part Number Description ITSP-PM120C ITS Plus, Pole Mount, 120 VAC, Coaxial Communications Warranty: 2 years ITSP-PM24C ITS Plus, Pole Mount, 12 - 24 VDC, Coaxial Communications Warranty: 3 years Top View: Mounted on a U Bracket Camera Specifications - Analog or Digital HD 1080p Outputs - 1/3 inch 2.1 Mega Pixel CMOS - Optical Mask Technology (OMT) - Resolution: 1080 lines - NTSC, RS170A, 1 Vp-p 75 ohm video - 0.1 Lux Min at Night to Over 10,000 Lux Daytime - S/N Ratio = 60 dB - AGC = 12 - 60dB - Automatic Electronic Shutter 1/30 to 1/30,000 sec - Power Consumption = 1.4 W - Operating Temperature: -40C to 74C - Surge Protection: Over 3,000V - Meets FCC Part 15, Subpart B - Effective Pixel: 1,944H, 1,092V - Zoom: 20x Micro Video Monitor Part Number Description ITSP-MVM Hand held battery operated color micro video monitor Weight: 3.5 ounces, Dimensions: 4.4” x 1.7” x 1.3” Warranty: 1 year ITS Plus Products are Designed and Manufactured in the USA 16.A.21.i Packet Pg. 905 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6220 Trailwood Drive, Suite 200, Plano, TX 75024 • Tel: 214-755-8169 • Fax: 972-370-2440 • www.itsplus3.com "Lighting Series" VIVDS Cards - Single or Dual Channel o Dual Channel Card Includes Complimentary Ethernet § Monitor and Adjust Detection From a TMC o “Circle Zone” Technology § Enables 1,000 ft Advanced Detection § Vehicle/Bicycle Speed and Counting § Adaptive Control o Optional SLDC With 128 Outputs § FHWA Performance Metrics o TS1, TS2, ATC and 170/2070 compatible ITS Plus VIVDS Cards Typical 24 hour performance is zero missed vehicles and 99% accuracy (1% occasional shadow trip/hung line). Because of this performance ITS Plus software has been stable since 2015 with no updates. The innovative design creates ease of programming, high performance, coupled with an extremely attractive price point. Two distinct methods of detection; because no single technology can do everything. Line Zones are designed for stop bar detection. A simple mouse/monitor set up allows for an intuitive 3 step programming. Circle Zones are virtual loops optimized for Adaptive Control, Advanced Detection, Ramp Metering and Vehicle/Bicycle counting. The unique technology enables advanced detection to 1,000 ft. coupled with accurate counts. Two weeks of data can also be store on the card in 15 minute increments. Optical Mask Technology (OMT) + Circle Zones + 128 Outputs = Performance Metrics OMT blocks bright light sources in the field of view while generated high contrast "edges" on moving vehicles. This produces a larger "flight envelope" in terms of detection performance and ease of set up. Coupled with our Circle Zone Technology and 128 Output SDLC we provide the recipe for generated the Performance Metrics required by the FHWA. Think of it as the best features of radar and thermal with the ease of installation of video and you have the unbeatable Lightning Series from ITS Plus. Single and Dual Channel ITSP-V100 and ITSP-V200E 16.A.21.i Packet Pg. 906 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6220 Trailwood Drive, Suite 200, Plano, TX 75024 • Tel: 214-755-8169 • Fax: 972-370-2440 • www.itsplus3.com "Lighting Series" VIVDS Cards - Specifications ITSP-V100 - Single Channel VIVDS Card - Input Voltage: 12 – 24 VDC - Power Consumption: 1.5 W - Programming Via: USB mouse/analog video monitor, or Laptop PC - Video/Data Outputs: NTSC, MJPEG or RS232 - Card Outputs: 4 relay outputs - 30 detection zones with flexible logic for mapping to relay outputs - 2 weeks of stored data in 15 minute increments - NTSC input via BNC - Exceeds TS2 Electrical/Environmental cabinet specs - ISO9001:2000 Certified manufacturing ITSP-V200E - Dual Channel VIVDS Card with Ethernet Output - Input Voltage: 12 – 24 VDC - Power Consumption: 2.5W - Programming Via: USB mouse/analog video monitor, or Laptop PC, or PC at TMC (if connected by Ethernet) - Video/Data Outputs: NTSC, MJPEG, RS232 or Ethernet - Card Outputs: 4 relay outputs - 30 detection zones with flexible logic for mapping to relay outputs - Exceeds TS2 Electrical/Environmental cabinet specs - ISO9001:2000 Certified manufacturing Simultaneously performing Vehicle Counts Stop Bar and Advanced Detection. Ideal for Adaptive Control. OMT blocks high intensity light sources (sun, headlights, traffic lights) while generating high contrast edges on vehicles. Coupled with 12 outputs for FHWA Performance Metrics. 16.A.21.i Packet Pg. 907 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SPEC NUMBER:342095182SIM DESCRIPTION RG59 18/2 Siam CL2 COAX CONSTRUCTION AWG 20 Solid Bare Copper Dielectric Polyethylene Nominal Wall .060 Nom OD .146 Brd 8/36 Bare Copper Nom Cap 17.3 Nom Imped 75% Nom Vel of Prop 78 Nominal Attenuation 50MHz 100MHz 200MHz 400MHz 700MHz 900MHz 1000MHz 2.0db/100ft 3.3db/100ft 4.4db/100ft 6.5db/100ft 8.8db/100ft 10.3db/100ft 11.1db/100ft CABLE CONSTRUCTION Conductor 18 7/BC Insulation Polyethylene Nom Wall .006 Twisting Yes 5-6" lay OVERALL CABLE CONSTRUCTION Insulation PVC Nom OD .242 & .160 Temp –20C to 75C CHARACTERISTICS This cable is run parallel with a coax cable and an 18/2 placed side by side in a zip type construction PRINT: "E119037 1C-20AWG CL2 75C 75C Made in the USA" Ft Markers 2401 DISCOVERY BLVD., ROCKWALL, TEXAS 75032 214-771-3441 Office 972-722-9168 Fax 16.A.21.i Packet Pg. 908 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) DRAWING NO: MATERIAL REV.A ITEM NUMBER TITLE UNIT SCALE MM APPROVED CHECKED DRAWER JL NO. BOM LIST SPECIFICATIONS A 08-2012 DESCRIPTIONREV.DATE RG58 Solid Core BNC Male Crimp Connector RoHS 1 31X1-05500 RG58 BNC Male Solder Crimp Type,Nickel Plated, Insulation White 1 12.0 ±0.2 Ø6.0±0.211.5 ±0.3 Ø1.34±0.15Ø2.1Ø2.5±0.224.5 ±0.3 Ø14.3±0.3Ø13.4±0.3Ø 5.6±0.2Ø4.52 3 Pin:Material: Brass,Gold Plated2 Ring ,Material: Brass, Nickel Plated3 3 piece set 16.A.21.i Packet Pg. 909 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Logo ITSP-SSP-6 Surge Suppression Panel Photo ITSP-SSP-6 Pictured Description The ITSP-SSP-6 surge suppression panel features a compact “Christmas Tree” BNC layout to reduce both the strain on a BNC connector and the “footprint” required inside a cabinet. The panel supports 33X, NEMA and ATC cabinets. Designed to easily attach to a standard 19” EIA rack, or NEMA rails, it provides 20kA of surge suppression for up to 6 coaxial inputs. A resettable high-voltage circuit breaker adds A/C circuit protection to the cabinet, while six individual switches allow you to easily, safely and efficiently remove power to one camera at a time during installation and maintenance. 16.A.21.i Packet Pg. 910 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 1 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: THE E-VERIFY MEMORANDUM OF UNDERSTANDING FOR EMPLOYERS ARTICLE I PURPOSE AND AUTHORITY E-Verify is a program that electronically confirms an employee’s eligibility to work in the United States after completion of Form I-9, Employment Eligibility Verification (Form I-9). This Memorandum of Understanding (MOU) explains certain features of the E-Verify program and describes specific responsibilities of the Employer, the Social Security Administration (SSA), and DHS. Authority for the E-Verify program is found in Title IV, Subtitle A, of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996 (IIRIRA), Pub. L. 104-208, 110 Stat. 3009, as amended (8 U.S.C. § 1324a note). The Federal Acquisition Regulation (FAR) Subpart 22.18, “Employment Eligibility Verification” and Executive Order 12989, as amended, provide authority for Federal contractors and subcontractors (Federal contractor) to use E-Verify to verify the employment eligibility of certain employees working on Federal contracts. ARTICLE II RESPONSIBILITIES A. RESPONSIBILITIES OF THE EMPLOYER 1.The Employer agrees to display the following notices supplied by DHS in a prominent place that is clearly visible to prospective employees and all employees who are to be verified through the system: a.Notice of E-Verify Participation b.Notice of Right to Work 2.The Employer agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the Employer representatives to be contacted about E-Verify. The Employer also agrees to keep such information current by providing updated information to SSA and DHS whenever the representatives’ contact information changes. 3.The Employer agrees to grant E-Verify access only to current employees who need E-Verify access. Employers must promptly terminate an employee’s E-Verify access if the employer is separated from the company or no longer needs access to E-Verify. 1145051 The parties to this agreement are the Department of Homeland Security (DHS) and the ITS Plus, Inc. (Employer). The purpose of this agreement is to set forth terms and conditions which the Employer will follow while participating in E-Verify. 16.A.21.i Packet Pg. 911 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 2 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: 4. The Employer agrees to become familiar with and comply with the most recent version of the E-Verify User Manual. 5. The Employer agrees that any Employer Representative who will create E-Verify cases will complete the E-Verify Tutorial before that individual creates any cases. a. The Employer agrees that all Employer representatives will take the refresher tutorials when prompted by E-Verify in order to continue using E-Verify. Failure to complete a refresher tutorial will prevent the Employer Representative from continued use of E-Verify. 6. The Employer agrees to comply with current Form I-9 procedures, with two exceptions: a. If an employee presents a "List B" identity document, the Employer agrees to only accept "List B" documents that contain a photo. (List B documents identified in 8 C.F.R. § 274a.2(b)(1)(B)) can be presented during the Form I-9 process to establish identity.) If an employee objects to the photo requirement for religious reasons, the Employer should contact E-Verify at 888-464-4218. b. If an employee presents a DHS Form I-551 (Permanent Resident Card), Form I-766 (Employment Authorization Document), or U.S. Passport or Passport Card to complete Form I-9, the Employer agrees to make a photocopy of the document and to retain the photocopy with the employee’s Form I-9. The Employer will use the photocopy to verify the photo and to assist DHS with its review of photo mismatches that employees contest. DHS may in the future designate other documents that activate the photo screening tool. Note: Subject only to the exceptions noted previously in this paragraph, employees still retain the right to present any List A, or List B and List C, document(s) to complete the Form I-9. 7. The Employer agrees to record the case verification number on the employee's Form I-9 or to print the screen containing the case verification number and attach it to the employee's Form I-9. 8. The Employer agrees that, although it participates in E-Verify, the Employer has a responsibility to complete, retain, and make available for inspection Forms I-9 that relate to its employees, or from other requirements of applicable regulations or laws, including the obligation to comply with the antidiscrimination requirements of section 274B of the INA with respect to Form I-9 procedures. a. The following modified requirements are the only exceptions to an Employer’s obligation to not employ unauthorized workers and comply with the anti-discrimination provision of the INA: (1) List B identity documents must have photos, as described in paragraph 6 above; (2) When an Employer confirms the identity and employment eligibility of newly hired employee using E-Verify procedures, the Employer establishes a rebuttable presumption that it has not violated section 274A(a)(1)(A) of the Immigration and Nationality Act (INA) with respect to the hiring of that employee; (3) If the Employer receives a final nonconfirmation for an employee, but continues to employ that person, the Employer must notify DHS and the Employer is subject to a civil money penalty between $550 and $1,100 for each failure to notify DHS of continued employment following a final nonconfirmation; (4) If the Employer continues to employ an employee after receiving a final nonconfirmation, then the Employer is subject to a rebuttable presumption that it has knowingly 1145051 16.A.21.i Packet Pg. 912 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 3 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: employed an unauthorized alien in violation of section 274A(a)(1)(A); and (5) no E-Verify participant is civilly or criminally liable under any law for any action taken in good faith based on information provided through the E-Verify. b. DHS reserves the right to conduct Form I-9 compliance inspections, as well as any other enforcement or compliance activity authorized by law, including site visits, to ensure proper use of E-Verify. 9. The Employer is strictly prohibited from creating an E-Verify case before the employee has been hired, meaning that a firm offer of employment was extended and accepted and Form I-9 was completed. The Employer agrees to create an E-Verify case for new employees within three Employer business days after each employee has been hired (after both Sections 1 and 2 of Form I-9 have been completed), and to complete as many steps of the E-Verify process as are necessary according to the E-Verify User Manual. If E-Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the Employer's attempting, in good faith, to make inquiries during the period of unavailability. 10. The Employer agrees not to use E-Verify for pre-employment screening of job applicants, in support of any unlawful employment practice, or for any other use that this MOU or the E-Verify User Manual does not authorize. 11. The Employer must use E-Verify for all new employees. The Employer will not verify selectively and will not verify employees hired before the effective date of this MOU. Employers who are Federal contractors may qualify for exceptions to this requirement as described in Article II.B of this MOU. 12. The Employer agrees to follow appropriate procedures (see Article III below) regarding tentative nonconfirmations. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. Further, when employees contest a tentative nonconfirmation based upon a photo mismatch, the Employer must take additional steps (see Article III.B. below) to contact DHS with information necessary to resolve the challenge. 13. The Employer agrees not to take any adverse action against an employee based upon the employee's perceived employment eligibility status while SSA or DHS is processing the verification request unless the Employer obtains knowledge (as defined in 8 C.F.R. § 274a.1(l)) that the employee is not work authorized. The Employer understands that an initial inability of the SSA or DHS automated verification system to verify work authorization, a tentative nonconfirmation, a case in continuance (indicating the need for additional time for the government to resolve a case), or the finding of a photo mismatch, does not establish, and should not be interpreted as, evidence that the employee is not work authorized. In any of such cases, the employee must be provided a full and fair opportunity to contest the finding, and if he or she does so, the employee may not be terminated or suffer any adverse employment consequences based upon the employee’s perceived employment eligibility status 1145051 16.A.21.i Packet Pg. 913 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 4 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: (including denying, reducing, or extending work hours, delaying or preventing training, requiring an employee to work in poorer conditions, withholding pay, refusing to assign the employee to a Federal contract or other assignment, or otherwise assuming that he or she is unauthorized to work) until and unless secondary verification by SSA or DHS has been completed and a final nonconfirmation has been issued. If the employee does not choose to contest a tentative nonconfirmation or a photo mismatch or if a secondary verification is completed and a final nonconfirmation is issued, then the Employer can find the employee is not work authorized and terminate the employee’s employment. Employers or employees with questions about a final nonconfirmation may call E-Verify at 1-888-464- 4218 (customer service) or 1-888-897-7781 (worker hotline). 14. The Employer agrees to comply with Title VII of the Civil Rights Act of 1964 and section 274B of the INA as applicable by not discriminating unlawfully against any individual in hiring, firing, employment eligibility verification, or recruitment or referral practices because of his or her national origin or citizenship status, or by committing discriminatory documentary practices. The Employer understands that such illegal practices can include selective verification or use of E-Verify except as provided in part D below, or discharging or refusing to hire employees because they appear or sound “foreign” or have received tentative nonconfirmations. The Employer further understands that any violation of the immigration-related unfair employment practices provisions in section 274B of the INA could subject the Employer to civil penalties, back pay awards, and other sanctions, and violations of Title VII could subject the Employer to back pay awards, compensatory and punitive damages. Violations of either section 274B of the INA or Title VII may also lead to the termination of its participation in E-Verify. If the Employer has any questions relating to the anti-discrimination provision, it should contact OSC at 1-800-255-8155 or 1-800-237-2515 (TDD). 15. The Employer agrees that it will use the information it receives from E-Verify only to confirm the employment eligibility of employees as authorized by this MOU. The Employer agrees that it will safeguard this information, and means of access to it (such as PINS and passwords), to ensure that it is not used for any other purpose and as necessary to protect its confidentiality, including ensuring that it is not disseminated to any person other than employees of the Employer who are authorized to perform the Employer's responsibilities under this MOU, except for such dissemination as may be authorized in advance by SSA or DHS for legitimate purposes. 16. The Employer agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email at E-Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 17. The Employer acknowledges that the information it receives from SSA is governed by the Privacy Act (5 U.S.C. § 552a(i)(1) and (3)) and the Social Security Act (42 U.S.C. 1306(a)). Any person who obtains this information under false pretenses or uses it for any purpose other than as provided for in this MOU may be subject to criminal penalties. 18. The Employer agrees to cooperate with DHS and SSA in their compliance monitoring and evaluation of E-Verify, which includes permitting DHS, SSA, their contractors and other agents, upon 1145051 16.A.21.i Packet Pg. 914 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 5 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: reasonable notice, to review Forms I-9 and other employment records and to interview it and its employees regarding the Employer’s use of E-Verify, and to respond in a prompt and accurate manner to DHS requests for information relating to their participation in E-Verify. 19. The Employer shall not make any false or unauthorized claims or references about its participation in E-Verify on its website, in advertising materials, or other media. The Employer shall not describe its services as federally-approved, federally-certified, or federally-recognized, or use language with a similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify services and any claim to that effect is false. 20. The Employer shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the prior written consent of DHS. 21. The Employer agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see M-795 (Web)) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the Employer’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 22. The Employer understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the Employer may be subject to appropriate legal action and termination of its participation in E-Verify according to this MOU. B. RESPONSIBILITIES OF FEDERAL CONTRACTORS 1. If the Employer is a Federal contractor with the FAR E-Verify clause subject to the employment verification terms in Subpart 22.18 of the FAR, it will become familiar with and comply with the most current version of the E-Verify User Manual for Federal Contractors as well as the E-Verify Supplemental Guide for Federal Contractors. 2. In addition to the responsibilities of every employer outlined in this MOU, the Employer understands that if it is a Federal contractor subject to the employment verification terms in Subpart 22.18 of the FAR it must verify the employment eligibility of any “employee assigned to the contract” (as defined in FAR 22.1801). Once an employee has been verified through E-Verify by the Employer, the Employer may not create a second case for the employee through E-Verify. a. An Employer that is not enrolled in E-Verify as a Federal contractor at the time of a contract award must enroll as a Federal contractor in the E-Verify program within 30 calendar days of contract award and, within 90 days of enrollment, begin to verify employment eligibility of new hires using E-Verify. The Employer must verify those employees who are working in the United States, whether or not they are assigned to the contract. Once the Employer begins verifying new hires, such verification of new hires must be initiated within three business days after the hire date. Once enrolled in E-Verify as a Federal contractor, the Employer must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. 1145051 16.A.21.i Packet Pg. 915 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 6 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: b. Employers enrolled in E-Verify as a Federal contractor for 90 days or more at the time of a contract award must use E-Verify to begin verification of employment eligibility for new hires of the Employer who are working in the United States, whether or not assigned to the contract, within three business days after the date of hire. If the Employer is enrolled in E-Verify as a Federal contractor for 90 calendar days or less at the time of contract award, the Employer must, within 90 days of enrollment, begin to use E-Verify to initiate verification of new hires of the contractor who are working in the United States, whether or not assigned to the contract. Such verification of new hires must be initiated within three business days after the date of hire. An Employer enrolled as a Federal contractor in E-Verify must begin verification of each employee assigned to the contract within 90 calendar days after date of contract award or within 30 days after assignment to the contract, whichever is later. c. Federal contractors that are institutions of higher education (as defined at 20 U.S.C. 1001(a)), state or local governments, governments of Federally recognized Indian tribes, or sureties performing under a takeover agreement entered into with a Federal agency under a performance bond may choose to only verify new and existing employees assigned to the Federal contract. Such Federal contractors may, however, elect to verify all new hires, and/or all existing employees hired after November 6, 1986. Employers in this category must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. d. Upon enrollment, Employers who are Federal contractors may elect to verify employment eligibility of all existing employees working in the United States who were hired after November 6, 1986, instead of verifying only those employees assigned to a covered Federal contract. After enrollment, Employers must elect to verify existing staff following DHS procedures and begin E-Verify verification of all existing employees within 180 days after the election. e. The Employer may use a previously completed Form I-9 as the basis for creating an E-Verify case for an employee assigned to a contract as long as: i. That Form I-9 is complete (including the SSN) and complies with Article II.A.6, ii. The employee’s work authorization has not expired, and iii. The Employer has reviewed the Form I-9 information either in person or in communications with the employee to ensure that the employee’s Section 1, Form I-9 attestation has not changed (including, but not limited to, a lawful permanent resident alien having become a naturalized U.S. citizen). f. The Employer shall complete a new Form I-9 consistent with Article II.A.6 or update the previous Form I-9 to provide the necessary information if: i. The Employer cannot determine that Form I-9 complies with Article II.A.6, ii. The employee’s basis for work authorization as attested in Section 1 has expired or changed, or iii. The Form I-9 contains no SSN or is otherwise incomplete. Note: If Section 1 of Form I-9 is otherwise valid and up-to-date and the form otherwise complies with 1145051 16.A.21.i Packet Pg. 916 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 7 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Article II.C.5, but reflects documentation (such as a U.S. passport or Form I-551) that expired after completing Form I-9, the Employer shall not require the production of additional documentation, or use the photo screening tool described in Article II.A.5, subject to any additional or superseding instructions that may be provided on this subject in the E-Verify User Manual. g. The Employer agrees not to require a second verification using E-Verify of any assigned employee who has previously been verified as a newly hired employee under this MOU or to authorize verification of any existing employee by any Employer that is not a Federal contractor based on this Article. 3. The Employer understands that if it is a Federal contractor, its compliance with this MOU is a performance requirement under the terms of the Federal contract or subcontract, and the Employer consents to the release of information relating to compliance with its verification responsibilities under this MOU to contracting officers or other officials authorized to review the Employer’s compliance with Federal contracting requirements. C. RESPONSIBILITIES OF SSA 1. SSA agrees to allow DHS to compare data provided by the Employer against SSA’s database. SSA sends DHS confirmation that the data sent either matches or does not match the information in SSA’s database. 2. SSA agrees to safeguard the information the Employer provides through E-Verify procedures. SSA also agrees to limit access to such information, as is appropriate by law, to individuals responsible for the verification of Social Security numbers or responsible for evaluation of E-Verify or such other persons or entities who may be authorized by SSA as governed by the Privacy Act (5 U.S.C. § 552a), the Social Security Act (42 U.S.C. 1306(a)), and SSA regulations (20 CFR Part 401). 3. SSA agrees to provide case results from its database within three Federal Government work days of the initial inquiry. E-Verify provides the information to the Employer. 4. SSA agrees to update SSA records as necessary if the employee who contests the SSA tentative nonconfirmation visits an SSA field office and provides the required evidence. If the employee visits an SSA field office within the eight Federal Government work days from the date of referral to SSA, SSA agrees to update SSA records, if appropriate, within the eight-day period unless SSA determines that more than eight days may be necessary. In such cases, SSA will provide additional instructions to the employee. If the employee does not visit SSA in the time allowed, E-Verify may provide a final nonconfirmation to the employer. Note: If an Employer experiences technical problems, or has a policy question, the employer should contact E-Verify at 1-888-464-4218. D. RESPONSIBILITIES OF DHS 1. DHS agrees to provide the Employer with selected data from DHS databases to enable the Employer to conduct, to the extent authorized by this MOU: a. Automated verification checks on alien employees by electronic means, and 1145051 16.A.21.i Packet Pg. 917 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 8 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: b. Photo verification checks (when available) on employees. 2. DHS agrees to assist the Employer with operational problems associated with the Employer's participation in E-Verify. DHS agrees to provide the Employer names, titles, addresses, and telephone numbers of DHS representatives to be contacted during the E-Verify process. 3. DHS agrees to provide to the Employer with access to E-Verify training materials as well as an E-Verify User Manual that contain instructions on E-Verify policies, procedures, and requirements for both SSA and DHS, including restrictions on the use of E-Verify. 4. DHS agrees to train Employers on all important changes made to E-Verify through the use of mandatory refresher tutorials and updates to the E-Verify User Manual. Even without changes to E-Verify, DHS reserves the right to require employers to take mandatory refresher tutorials. 5. DHS agrees to provide to the Employer a notice, which indicates the Employer's participation in E-Verify. DHS also agrees to provide to the Employer anti-discrimination notices issued by the Office of Special Counsel for Immigration-Related Unfair Employment Practices (OSC), Civil Rights Division, U.S. Department of Justice. 6. DHS agrees to issue each of the Employer’s E-Verify users a unique user identification number and password that permits them to log in to E-Verify. 7. DHS agrees to safeguard the information the Employer provides, and to limit access to such information to individuals responsible for the verification process, for evaluation of E-Verify, or to such other persons or entities as may be authorized by applicable law. Information will be used only to verify the accuracy of Social Security numbers and employment eligibility, to enforce the INA and Federal criminal laws, and to administer Federal contracting requirements. 8. DHS agrees to provide a means of automated verification that provides (in conjunction with SSA verification procedures) confirmation or tentative nonconfirmation of employees' employment eligibility within three Federal Government work days of the initial inquiry. 9. DHS agrees to provide a means of secondary verification (including updating DHS records) for employees who contest DHS tentative nonconfirmations and photo mismatch tentative nonconfirmations. This provides final confirmation or nonconfirmation of the employees' employment eligibility within 10 Federal Government work days of the date of referral to DHS, unless DHS determines that more than 10 days may be necessary. In such cases, DHS will provide additional verification instructions. ARTICLE III REFERRAL OF INDIVIDUALS TO SSA AND DHS A. REFERRAL TO SSA 1. If the Employer receives a tentative nonconfirmation issued by SSA, the Employer must print the notice as directed by E-Verify. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify 1145051 16.A.21.i Packet Pg. 918 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 9 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. After a tentative nonconfirmation, the Employer will refer employees to SSA field offices only as directed by E-Verify. The Employer must record the case verification number, review the employee information submitted to E-Verify to identify any errors, and find out whether the employee contests the tentative nonconfirmation. The Employer will transmit the Social Security number, or any other corrected employee information that SSA requests, to SSA for verification again if this review indicates a need to do so. 4. The Employer will instruct the employee to visit an SSA office within eight Federal Government work days. SSA will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 5. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. 6. The Employer agrees not to ask the employee to obtain a printout from the Social Security Administration number database (the Numident) or other written verification of the SSN from the SSA. B. REFERRAL TO DHS 1. If the Employer receives a tentative nonconfirmation issued by DHS, the Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. The Employer agrees to refer individuals to DHS only when the employee chooses to contest a tentative nonconfirmation. 4. If the employee contests a tentative nonconfirmation issued by DHS, the Employer will instruct the 1145051 16.A.21.i Packet Pg. 919 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 10 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: employee to contact DHS through its toll-free hotline (as found on the referral letter) within eight Federal Government work days. 5. If the Employer finds a photo mismatch, the Employer must provide the photo mismatch tentative nonconfirmation notice and follow the instructions outlined in paragraph 1 of this section for tentative nonconfirmations, generally. 6. The Employer agrees that if an employee contests a tentative nonconfirmation based upon a photo mismatch, the Employer will send a copy of the employee’s Form I-551, Form I-766, U.S. Passport, or passport card to DHS for review by: a. Scanning and uploading the document, or b. Sending a photocopy of the document by express mail (furnished and paid for by the employer). 7. The Employer understands that if it cannot determine whether there is a photo match/mismatch, the Employer must forward the employee’s documentation to DHS as described in the preceding paragraph. The Employer agrees to resolve the case as specified by the DHS representative who will determine the photo match or mismatch. 8. DHS will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 9. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. ARTICLE IV SERVICE PROVISIONS A. NO SERVICE FEES 1. SSA and DHS will not charge the Employer for verification services performed under this MOU. The Employer is responsible for providing equipment needed to make inquiries. To access E-Verify, an Employer will need a personal computer with Internet access. ARTICLE V MODIFICATION AND TERMINATION A. MODIFICATION 1. This MOU is effective upon the signature of all parties and shall continue in effect for as long as the SSA and DHS operates the E-Verify program unless modified in writing by the mutual consent of all parties. 2. Any and all E-Verify system enhancements by DHS or SSA, including but not limited to E-Verify checking against additional data sources and instituting new verification policies or procedures, will be covered under this MOU and will not cause the need for a supplemental MOU that outlines these changes. 1145051 16.A.21.i Packet Pg. 920 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 11 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: B. TERMINATION 1. The Employer may terminate this MOU and its participation in E-Verify at any time upon 30 days prior written notice to the other parties. 2. Notwithstanding Article V, part A of this MOU, DHS may terminate this MOU, and thereby the Employer’s participation in E-Verify, with or without notice at any time if deemed necessary because of the requirements of law or policy, or upon a determination by SSA or DHS that there has been a breach of system integrity or security by the Employer, or a failure on the part of the Employer to comply with established E-Verify procedures and/or legal requirements. The Employer understands that if it is a Federal contractor, termination of this MOU by any party for any reason may negatively affect the performance of its contractual responsibilities. Similarly, the Employer understands that if it is in a state where E-Verify is mandatory, termination of this by any party MOU may negatively affect the Employer’s business. 3. An Employer that is a Federal contractor may terminate this MOU when the Federal contract that requires its participation in E-Verify is terminated or completed. In such cases, the Federal contractor must provide written notice to DHS. If an Employer that is a Federal contractor fails to provide such notice, then that Employer will remain an E-Verify participant, will remain bound by the terms of this MOU that apply to non-Federal contractor participants, and will be required to use the E-Verify procedures to verify the employment eligibility of all newly hired employees. 4. The Employer agrees that E-Verify is not liable for any losses, financial or otherwise, if the Employer is terminated from E-Verify. ARTICLE VI PARTIES A. Some or all SSA and DHS responsibilities under this MOU may be performed by contractor(s), and SSA and DHS may adjust verification responsibilities between each other as necessary. By separate agreement with DHS, SSA has agreed to perform its responsibilities as described in this MOU. B. Nothing in this MOU is intended, or should be construed, to create any right or benefit, substantive or procedural, enforceable at law by any third party against the United States, its agencies, officers, or employees, or against the Employer, its agents, officers, or employees. C. The Employer may not assign, directly or indirectly, whether by operation of law, change of control or merger, all or any part of its rights or obligations under this MOU without the prior written consent of DHS, which consent shall not be unreasonably withheld or delayed. Any attempt to sublicense, assign, or transfer any of the rights, duties, or obligations herein is void. D. Each party shall be solely responsible for defending any claim or action against it arising out of or related to E-Verify or this MOU, whether civil or criminal, and for any liability wherefrom, including (but not limited to) any dispute between the Employer and any other person or entity regarding the applicability of Section 403(d) of IIRIRA to any action taken or allegedly taken by the Employer. E. The Employer understands that its participation in E-Verify is not confidential information and may be disclosed as authorized or required by law and DHS or SSA policy, including but not limited to, 1145051 16.A.21.i Packet Pg. 921 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 12 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Congressional oversight, E-Verify publicity and media inquiries, determinations of compliance with Federal contractual requirements, and responses to inquiries under the Freedom of Information Act (FOIA). F. The individuals whose signatures appear below represent that they are authorized to enter into this MOU on behalf of the Employer and DHS respectively. The Employer understands that any inaccurate statement, representation, data or other information provided to DHS may subject the Employer, its subcontractors, its employees, or its representatives to: (1) prosecution for false statements pursuant to 18 U.S.C. 1001 and/or; (2) immediate termination of its MOU and/or; (3) possible debarment or suspension. G. The foregoing constitutes the full agreement on this subject between DHS and the Employer. To be accepted as an E-Verify participant, you should only sign the Employer’s Section of the signature page. If you have any questions, contact E-Verify at 1-888-464-4218. 1145051 16.A.21.i Packet Pg. 922 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 13 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Approved by: Employer Name (Please Type or Print) Title Signature Date Department of Homeland Security – Verification Division Name (Please Type or Print) Title Signature Date 1145051 ITS Plus, Inc. Evan Liu Electronically Signed 11/18/2016 USCIS Verification Division Electronically Signed 11/18/2016 16.A.21.i Packet Pg. 923 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 14 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Information Required for the E-Verify Program Information relating to your Company: Company Name Company Facility Address Company Alternate Address County or Parish Employer Identification Number North American Industry Classification Systems Code Parent Company Number of Employees Number of Sites Verified for 1145051 ITS Plus, Inc. 6220 Trailwood Drive Plano, TX 75024 COLLIN 203858711 238 5 to 9 1 16.A.21.i Packet Pg. 924 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 15 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Are you verifying for more than 1 site? If yes, please provide the number of sites verified for in each State: 1145051 TEXAS 1 site(s) 16.A.21.i Packet Pg. 925 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 16 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: Information relating to the Program Administrator(s) for your Company on policy questions or operational problems: 1145051 Name Evan Liu Phone Number (817) 404 - 9287 Fax Number Email Address staci.ingram@itsplus3.com 16.A.21.i Packet Pg. 926 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 17 of 17 E-Verify MOU for Employers | Revision Date 06/01/13 Company ID Number: 1145051 Page intentionally left blank 16.A.21.i Packet Pg. 927 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.i Packet Pg. 928 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 2Detail by FEI/EIN Number 10/25/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiN... 16.A.21.i Packet Pg. 929 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Document Number FEI/EIN Number Date Filed State Status Detail by FEI/EIN Number Foreign Profit Corporation ITS PLUS 3, INC. Cross Reference Name ITS PLUS, INC. Filing Information F19000004830 20-3858711 10/14/2019 TX ACTIVE Principal Address 6220 TRAILWOOD DR., SUITE 200 PLANO, TX 75024 Mailing Address 6220 TRAILWOOD DR., SUITE 200 PLANO, TX 75024 Registered Agent Name & Address REGISTERED AGENTS INC. 7901 4TH ST N, STE 300 ST. PETERSBURG, FL 33702 Officer/Director Detail Name & Address Title CHRM HUTCHISON, MIKE 6220 TRAILWOOD DR., SUITE 200 PLANO, TX 75024 Title P INGRAM, STACI 6220 TRAILWOOD DR., SUITE 200 PLANO, TX 75024 Annual Reports No Annual Reports Filed Document Images No images are available for this filing. Florida Department of State, Division of Corporations Page 2 of 2Detail by FEI/EIN Number 10/25/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiN... 16.A.21.i Packet Pg. 930 Attachment: 19-7607 ITS Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) 11/14/2019 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND,EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW.THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT:If the certificate holder is an ADDITIONAL INSURED,the policy(ies)must be endorsed.If SUBROGATIONIS WAIVED, subject to the terms and conditions of the policy,certain policies may require an endorsement.A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). PRODUCER NFP PROPERTY & CASUALTY SVCS/PHS 42630580 The Hartford Business Service Center 3600 Wiseman Blvd San Antonio, TX 78265 CONTACT NAME: PHONE (A/C, No, Ext): (866) 467-8730 FAX (A/C, No): (888) 443-6112 E-MAIL ADDRESS: INSURER(S) AFFORDING COVERAGE NAIC# INSURED ITS PLUS, INC. 6220 TRAILWOOD DR PLANO TX 75024-6023 INSURER A :Sentinel Insurance Company Ltd.11000 INSURER B :Hartford Fire and Its P&C Affiliates 00914 INSURER C : INSURER D : INSURER E : INSURER F : COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED.NOTWITHSTANDING ANY REQUIREMENT,TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN,THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSR LTR TYPE OF INSURANCE ADDL INSR SUBR WVD POLICY NUMBER POLICY EFF (MM/DD/YYYY) POLICY EXP (MM/DD/Y YYY)LIMITS A COMMERCIAL GENERAL LIABILITY X 42 SBA PG3611 03/11/2019 03/11/2020 EACH OCCURRENCE $1,000,000 CLAIMS-MADE X OCCUR DAMAGE TO RENTED PREMISES (Ea occurrence)$1,000,000 X General Liability MED EXP (Any one person)$10,000 PERSONAL & ADV INJURY $1,000,000 GEN'L AGGREGATE LIMIT APPLIES PER:GENERAL AGGREGATE $2,000,000 POLICY PRO- JECT X LOC PRODUCTS - COMP/OP AGG $2,000,000 OTHER: A AUTOMOBILE LIABILITY 42 SBA PG3611 03/11/2019 03/11/2020 COMBINED SINGLE LIMIT (Ea accident)$1,000,000 ANY AUTO BODILY INJURY (Per person) ALL OWNED AUTOS SCHEDULED AUTOS BODILY INJURY (Per accident) X HIRED AUTOS X NON-OWNED AUTOS PROPERTY DAMAGE (Per accident) UMBRELLA LIAB EXCESS LIAB OCCUR CLAIMS- MADE EACH OCCURRENCE AGGREGATE DED RETENTION $ B WORKERS COMPENSATION AND EMPLOYERS' LIABILITY ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory in NH) If yes, describe under DESCRIPTION OF OPERATIONS below N/ A 42 WBC CM2164 03/11/2019 03/11/2020 X PER STATUTE OTH- ER Y/N E.L. EACH ACCIDENT $1,000,000 E.L. DISEASE -EA EMPLOYEE $1,000,000 E.L. DISEASE - POLICY LIMIT $1,000,000 A EMPLOYMENT PRACTICES LIABILITY 42 SBA PG3611 03/11/2019 03/11/2020 Each Claim Limit Aggregate Limit $10,000 $10,000 DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) Those usual to the Insured's Operations. Please see Additional Remarks Schedule Acord Form 101 attached. CERTIFICATE HOLDER CANCELLATION Collier County Board of County Commissioners 3295 TAMIAMI TRL E NAPLES FL 34112-5758 SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF,NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. AUTHORIZED REPRESENTATIVE © 1988-2015 ACORD CORPORATION. All rights reserved. ACORD 25 (2016/03)The ACORD name and logo are registered marks of ACORD 16.A.21.j Packet Pg. 931 Attachment: 19-7607 ITS_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) ACORD 101 (2014/01)© 2014 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORD AGENCY CUSTOMER ID: LOC# : ADDITIONAL REMARKS SCHEDULE Page 2 of 2 AGENCY NFP PROPERTY & CASUALTY SVCS/PHS NAMED INSURED ITS PLUS, INC. 6220 TRAILWOOD DR PLANO TX 75024-6023 POLICY NUMBER SEE ACORD 25 CARRIER SEE ACORD 25 NAIC CODE EFFECTIVE DATE:SEE ACORD 25 ADDITIONAL REMARKS THIS ADDITIONAL REMARKS FORM IS A SCHEDULE TO ACORD FORM FORM NUMBER:ACORD 25 FORM TITLE:CERTIFICATE OF LIABILITY INSURANCE Bid # 19-7607 “Traffic Operations Signal Components & Hardware”<br>Collier County Board of County Commissioners, OR , Board of County Commissioners in Collier County, OR, Collier County Government, OR Collier are additional insured per the Business Liability Coverage Form SS0008 attached to this policy. Coverage is primary and noncontributory per the Business Liability Coverage Form SS0008, attached to this policy 16.A.21.j Packet Pg. 932 Attachment: 19-7607 ITS_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.kPacket Pg. 933Attachment: 19-7607 Notice of Recommended Award (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 934 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 935 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 936 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 937 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 938 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 939 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 940 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 941 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 942 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.l Packet Pg. 943 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / Document Number FEI/EIN Number Date Filed State Status Last Event Event Date Filed Detail by FEI/EIN Number Foreign Profit Corporation PEEK TRAFFIC CORPORATION Filing Information F04000000433 20-0348594 01/22/2004 DE ACTIVE REINSTATEMENT 06/02/2014 Principal Address 5401 N Sam Houston Parkway W Houston, TX 77086 Changed: 04/21/2016 Mailing Address 5401 N Sam Houston Parkway W Houston, TX 77086 Changed: 04/21/2016 Registered Agent Name & Address C T CORPORATION SYSTEM 1200 SOUTH PINE ISLAND ROAD PLANTATION, FL 33324 Officer/Director Detail Name & Address Title CEO BRUNELL, ALEJANDRO 6408 Parkland Drive Suite 102 Sarasota, FL 34243 Title COO GARCIA, ROLANDO 6408 Parkland Drive Suite 102 Sarasota, FL 34243 DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.l Packet Pg. 944 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Title CFO Fuentes, Alejandro 5401 N Sam Houston Parkway W Houston, TX 77086 Annual Reports Report Year Filed Date 2017 02/14/2017 2018 03/20/2018 2019 04/01/2019 Document Images 04/01/2019 -- ANNUAL REPORT View image in PDF format 03/20/2018 -- ANNUAL REPORT View image in PDF format 02/14/2017 -- ANNUAL REPORT View image in PDF format 04/21/2016 -- ANNUAL REPORT View image in PDF format 01/16/2015 -- ANNUAL REPORT View image in PDF format 02/23/2012 -- ANNUAL REPORT View image in PDF format 02/22/2011 -- ANNUAL REPORT View image in PDF format 01/04/2010 -- ANNUAL REPORT View image in PDF format 04/30/2009 -- ANNUAL REPORT View image in PDF format 06/19/2008 -- ANNUAL REPORT View image in PDF format 04/25/2007 -- ANNUAL REPORT View image in PDF format 02/07/2006 -- REINSTATEMENT View image in PDF format 01/22/2004 -- Foreign Profit View image in PDF format Florida Department of State, Division of Corporations Page 2 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.l Packet Pg. 945 Attachment: 19-7607 Peek Traffic Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 11/11/2019 Crystal IBC LLC Alliant Insurance Services 2000 West Loop South,Suite 2150 Houston TX 77027 Jane Orr 713-624-6315 Jane.Orr@alliant.com AXIS Surplus Insurance Company 26620 SIGNGR1 Trumbull Insurance Company 27120SignalGroupInc/Peek Traffic Corporation. 5401 North Sam Houston Parkway West Houston TX 77086 Hartford Insurance Group 914 Navigators Specialty Insurance Company 36056 196493111 A X 1,000,000 X 300,000 10,000 1,000,000 2,000,000 X P00100001234403 7/30/2019 7/30/2020 2,000,000 Employee Benefit Lia 1,000,000 B 1,000,000 X X X 61UENHH1247 7/30/2019 7/30/2020 D X 10,000,000 X HO19EXCZ028MJIC 7/30/2019 7/30/2020 10,000,000 C X61WEAS99207/30/2019 7/30/2020 1,000,000 1,000,000 1,000,000 C Stop Gap Liability 61WEAS9920 7/30/2019 7/30/2020 Each Employee 1,000,000 GENERAL LIABILITY:Additional Insured required by written contract including completed operations (CG2010 &CG2037);Waiver of Subrogation when required by written contract (CG2404);Primary/Non-Contributory wording when required by written contract (CG2001); AUTOMOBILE:Additional Insured required by written contract (HA9916);Waiver of Subrogation required by written contract (HA9916); Primary/Non-Contributory wording when required by written contract (HA9916); WORKERS COMPENSATION:Waiver of Subrogation required by written contract (WC420304B)Other States Insurance -Part Three of the policy applies to Other States Insurance –all states except monopolistic states (CA,CO,FL,IN,KS,OH,OR,TX).Alternate Employer (WC000301) See Attached... Collier County Board of County Commissioners 3295 Tamiami Trail East Naples FL 34112 16.A.21.m Packet Pg. 946 Attachment: 19-7607 Peek_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) ACORD 101 (2008/01) The ACORD name and logo are registered marks of ACORD © 2008 ACORD CORPORATION. All rights reserved. THIS ADDITIONAL REMARKS FORM IS A SCHEDULE TO ACORD FORM, FORM NUMBER:FORM TITLE: ADDITIONAL REMARKS ADDITIONAL REMARKS SCHEDULE Page of AGENCY CUSTOMER ID: LOC #: AGENCY CARRIER NAIC CODE POLICY NUMBER NAMED INSURED EFFECTIVE DATE: SIGNGR1 1 1 Crystal IBC LLC SignalGroup Inc /Peek Traffic Corporation. 5401 North Sam Houston Parkway West Houston TX 77086 25 CERTIFICATE OF LIABILITY INSURANCE UMBRELLA LIABILITY:Follow form underlying including Additional Insured required by written contract,Waiver of Subrogation required by written contract All of the above subject to policy terms,conditions,limitations,and exclusions,and as permitted by law. “For any and all work performed on behalf of Collier County.” 16.A.21.m Packet Pg. 947 Attachment: 19-7607 Peek_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 948 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 949 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 950 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 951 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 952 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 953 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 954 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 955 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 956 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 957 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 958 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 959 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 960 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 961 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 962 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 963 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 964 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 965 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 966 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 967 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 968 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 969 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 970 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 971 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.n Packet Pg. 972 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / Document Number FEI/EIN Number Date Filed State Status Last Event Event Date Filed Event Effective Date Detail by FEI/EIN Number Foreign Limited Liability Company RHYTHM ENGINEERING, LLC Filing Information M11000004467 80-0280265 09/06/2011 KS ACTIVE LC STMNT OF RA/RO CHG 01/22/2018 NONE Principal Address 11228 Thompson Ave LENEXA, KS 66219 Changed: 04/25/2016 Mailing Address 11228 Thompson Ave LENEXA, KS 66219 Changed: 04/25/2016 Registered Agent Name & Address CORPORATION SERVICE COMPANY 1201 HAYS STREET Suite 4 TALLAHASSEE, FL 32301 Name Changed: 01/22/2018 Address Changed: 01/22/2018 Authorized Person(s) Detail Name & Address Title Managing Member Chandra, Reggie 11228 Thompson Ave LENEXA, KS 66219 DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.n Packet Pg. 973 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Title Authorized Representative Benson, Scott 11228 Thompson Ave Lenexa, KS 66219 Annual Reports Report Year Filed Date 2017 04/19/2017 2018 04/20/2018 2019 01/17/2019 Document Images 01/17/2019 -- ANNUAL REPORT View image in PDF format 04/20/2018 -- ANNUAL REPORT View image in PDF format 01/22/2018 -- CORLCRACHG View image in PDF format 04/19/2017 -- ANNUAL REPORT View image in PDF format 04/25/2016 -- ANNUAL REPORT View image in PDF format 04/30/2015 -- ANNUAL REPORT View image in PDF format 06/16/2014 -- CORLCRACHG View image in PDF format 01/10/2014 -- ANNUAL REPORT View image in PDF format 03/22/2013 -- ANNUAL REPORT View image in PDF format 01/05/2012 -- ANNUAL REPORT View image in PDF format 09/06/2011 -- Foreign Limited View image in PDF format Florida Department of State, Division of Corporations Page 2 of 2Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.n Packet Pg. 974 Attachment: 19-7607 Rhythm Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? INSR ADDL SUBR LTR INSD WVD DATE (MM/DD/YYYY) PRODUCER CONTACTNAME: FAXPHONE(A/C, No):(A/C, No, Ext): E-MAILADDRESS: INSURER A : INSURED INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : POLICY NUMBER POLICY EFF POLICY EXPTYPE OF INSURANCE LIMITS(MM/DD/YYYY)(MM/DD/YYYY) AUTOMOBILE LIABILITY UMBRELLA LIAB EXCESS LIAB WORKERS COMPENSATION AND EMPLOYERS' LIABILITY DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) AUTHORIZED REPRESENTATIVE EACH OCCURRENCE $ DAMAGE TO RENTEDCLAIMS-MADE OCCUR $PREMISES (Ea occurrence) MED EXP (Any one person)$ PERSONAL & ADV INJURY $ GEN'L AGGREGATE LIMIT APPLIES PER:GENERAL AGGREGATE $ PRO-POLICY LOC PRODUCTS - COMP/OP AGG $JECT OTHER:$ COMBINED SINGLE LIMIT $(Ea accident) ANY AUTO BODILY INJURY (Per person)$ OWNED SCHEDULED BODILY INJURY (Per accident)$AUTOS ONLY AUTOS HIRED NON-OWNED PROPERTY DAMAGE $AUTOS ONLY AUTOS ONLY (Per accident) $ OCCUR EACH OCCURRENCE $ CLAIMS-MADE AGGREGATE $ DED RETENTION $$ PER OTH-STATUTE ER E.L. EACH ACCIDENT $ E.L. DISEASE - EA EMPLOYEE $ If yes, describe under E.L. DISEASE - POLICY LIMIT $DESCRIPTION OF OPERATIONS below INSURER(S) AFFORDING COVERAGE NAIC # COMMERCIAL GENERAL LIABILITY Y / N N / A (Mandatory in NH) SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: CERTIFICATE HOLDER CANCELLATION © 1988-2015 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORDACORD 25 (2016/03) CERTIFICATE OF LIABILITY INSURANCE Lockton Companies 444 W. 47th Street, Suite 900 Kansas City MO 64112-1906 (816) 960-9000 RHYTHM ENGINEERING, LLC 11228 THOMPSON AVENUE LENEXA KS 66219 Travelers Indemnity Company of America 25666 Travelers Property Casualty Co of America 25674 X X 1,000,000 300,000 10,000 1,000,000 2,000,000 2,000,000 X 1,000,000 XXXXXXX XXXXXXX XXXXXXX XXXXXXX X 1,000,000 1,000,000 XXXXXXX N X 1,000,000 1,000,000 1,000,000 B BA 3L220210 2/1/2019 2/1/2020 A ZLP-81M74098 2/1/2019 2/1/2020 A CUP-9K895007 2/1/2019 2/1/2020 B UB-9J778435 2/1/2019 2/1/2020 2/1/2020 1418976 Y N Y N N N N 7/29/2019 16222296 16222296 XXXXXXX COLLIER COUNTY BOARD OF COMMISSIONERS 3295 TAMIAMI TRAIL EAST NAPLES FL 34112 FOR ANY AND ALL WORK PERFORMED ON BEHALF OF COLLIER COUNTY. COLLIER COUNTY BOARD OF COMMISSIONERS, OR, BOARD OF COUNTY COMMISSIONERS IN COLLIER COUNTY, OR, COLLIER COUNTY GOVERNMENT, OR COLLIER COUNTY ARE ADDITIONAL INSURED ON A PRIMARY AND NON-CONTRIBUTORY BASIS ON GENERAL AND AUTO LIABILITY COVERAGE, AS REQUIRED BY WRITTEN CONTRACT AND SUBJECT TO THE TERMS AND CONDITIONS OF THE POLICY. FOR CANCELLATION FOR ANY REASON OTHER THAN NONPAY MENT OF PREMIUM, THE INSURER(S) WILL SEND 30 DAY S NOTICE OF CANCELLATION TO THE CERTIFICATE HOLDER. 16.A.21.o Packet Pg. 975 Attachment: 19-7607 Rhythm_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) COLLIER COUNTY BOARD OF COUNTY COMMISSIONERS INVITATION TO BID (ITB) FOR TRAFFIC OPERATIONS SIGNAL COMPONENTS & HARDWARE SOLICITATION NO.: 19-7607 VIVIANA GIARIMOUSTAS, PROCUREMENT STRATEGIST PROCUREMENT SERVICES DIVISION 3295 TAMIAMI TRAIL EAST, BLDG C-2 NAPLES, FLORIDA 34112 TELEPHONE: (239) 252-8375 Viviana.Giarimoustas@colliercountyfl.gov (Email) This solicitation document is prepared in a Microsoft Word format. Any alterations to this document made by the Consultant may be grounds for rejection of proposal, cancellation of any subsequent award, or any other legal remedies available to the Collier County Government. 16.A.21.p Packet Pg. 976 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 2 19-7607 Traffic Operations Signal Components & Hardware SOLICITATION PUBLIC NOTICE INVITATION TO BID (ITB) NUMBER: 19-7607 PROJECT TITLE: Traffic Operations Signal Components & Hardware DUE DATE: Tuesday, July 30, 2019 10:00 AM EST PLACE OF BID OPENING: PROCUREMENT SERVICES DIVISION 3295 TAMIAMI TRAIL EAST, BLDG C-2 NAPLES, FL 34112 All proposals shall be submitted online via the Collier County Procurement Services Division Online Bidding System: https://www.bidsync.com/bidsync-cas/ INTRODUCTION As requested by the Transportation Engineering & Construction Management Division (hereinafter, the “Division or Department”), the Collier County Board of County Commissioners Procurement Services Division (hereinafter, “County”) has issued this Invitation to Bid (hereinafter, “ITB”) with the intent of obtaining bid submittals from interested and qualified vendors in accordance with the terms, conditions and specifications stated or attached. The vendor, at a minimum, must achieve the requirements of the Specifications or Scope of Work stated. The results of this solicitation may be used by other County departments once awarded according to the Board of County Commissioners Procurement Ordinance. Historically, County departments have spent approximately $600,000 dollars on average per year; however, this may not be indicative of future buying patterns. BACKGROUND Collier County, Florida currently maintains 215 signalized intersections and 72 flashing beacons. The majority of the signalized intersections are connected to a traffic management center using 150 miles of fiber optic cable. Congestion management is provided by using 176 PTZ (pan-tilt-zoom) cameras. All fully operational signalized intersections are equipped with infrared emergency vehicle preemption on all approaches. This bid is to deliver hardware and components used in the construction, maintenance, and repair of traffic control devices and associated infrastructure located in Collier County, Florida. TERM OF CONTRACT The contract term, if awards are made, is intended to be for three (3) years with two (2) one (1) year renewals. Prices shall remain firm for the initial term of this contract. Surcharges will not be accepted in conjunction with this contract, and such charges should be incorporated into the pricing structure. The County Manager, or designee, may, at his discretion, extend the Agreement under all of the terms and conditions contained in this Agreement for up to one hundred eighty (180) days. The County Manager, or designee, shall give the Contractor written notice of the County's intention to extend the Agreement term not less than ten (10) days prior to the end of the Agreement term then in effect. All goods are FOB destination and must be suitably packed and prepared to secure the lowest transportation rates and to comply with all carrier regulations. Risk of loss of any goods sold hereunder shall transfer to the COUNTY at the time and place of delivery; provided that risk of loss prior to actual receipt of the goods by the COUNTY nonetheless remain with VENDOR. AWARD CRITERIA ITB award criteria are as follows:  The County’s Procurement Services Division reserves the right to clarify a vendor’s submittal prior to the award of the solicitation. 16.A.21.p Packet Pg. 977 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 3 19-7607 Traffic Operations Signal Components & Hardware  It is the intent of Collier County to award to the lowest, responsive and responsible vendor(s) that represents the best value to the County.  For the purposes of determining the winning bidder, the County will select the vendor with the lowest price as outlined below: • Lowest Price Per Line Item  Collier County reserves the right to select one, or more than one supplier, award on a line item basis, establish a pool for quoting, or other options that represents the best value to the County; however, it is the intent to: • Identify a Primary and Secondary Per Line Item  The County reserves the right to issue a formal contract, standard County Purchase Order, or utilize the County Purchasing Card for the award of this solicitation. DETAILED SCOPE OF WORK In accordance with Florida Statutes Chapter 316.0745, and in addition to any applicable Federal Highway Administration Manual on Uniform Traffic Control Devices (MUTCD) requirements, all traffic control signals and devices sold or installed in the state of Florida must conform to the Florida Department of Transportation Standard Specifications for Road and Bridge Construction, and be listed on the FDOT Approved Product List, see link below: https://www.fdot.gov/programmanagement/productevaluation/apl/default.shtm https://fdotwp1.dot.state.fl.us/ApprovedProductList/Specifications Bid prices shall include delivery to the following address: 2885 South Horseshoe Drive, Naples, Florida 34104. Traffic Signal Heads (Vehicular) CCTO 1502 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: • Signal Head: Three (3) Section Horizontal configuration per MUTCD Part 4, Figure 4D-6 (B – Typical Arrangements) • Visor: Tunnel • Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red, Solid Yellow, Solid Green. • 15-year performance warranty on optical unit. • Color of Signal Head: Black • Material: Aluminum 1) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Red Signal: APL Number: 650-010-038 12” LED Yellow Signal: APL Number: 650-012-023 12” LED Green Signal: APL Number: 650-013-026 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Three (3) Section Vertical configuration per MUTCD Part 4, Figure 4D-6 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red, Solid Yellow, Solid Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 2) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Red Signal: APL Number: 650-010-038 12” LED Yellow Signal: APL Number: 650-012-023 12” LED Green Signal: APL Number: 650-013-026 CCTO 1506 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Three (3) Section Horizontal configuration per MUTCD Part 4, Figure 4D-10 (B – Typical Arrangements) 16.A.21.p Packet Pg. 978 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 4 19-7607 Traffic Operations Signal Components & Hardware b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red, Arrow Yellow, Arrow Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 3) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Arrow Red Signal: APL Number: 650-011-027 12” LED Arrow Yellow Signal: APL Number: 650-014-019 12” LED Arrow Green Signal: APL Number: 650-015-019 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Three (3) Section Vertical configuration per MUTCD Part 4, Figure 4D-10 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red, Arrow Yellow, Arrow Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 4) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Arrow Red Signal: APL Number: 650-011-027 12” LED Arrow Yellow Signal: APL Number: 650-014-019 12” LED Arrow Green Signal: APL Number: 650-015-019 CCTO 1509 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Four (4) Section Horizontal configuration per MUTCD Part 4, Figure 4D-12 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red, Arrow Yellow, Arrow Yellow, Arrow Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 5) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Arrow Red Signal: APL Number: 650-011-027 12” LED Arrow Yellow Signal: APL Number: 650-014-019 12” LED Arrow Green Signal: APL Number: 650-015-019 CCTO 1510 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Five (5) Section Horizontal configuration per MUTCD Part 4, Figure 4D-11 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red, Solid Yellow, Arrow Yellow, Arrow Green, & Solid Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 6) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Red Signal: APL Number: 650-010-038 12” LED Yellow Signal: APL Number: 650-012-023 12” LED Arrow Yellow Signal: APL Number: 650-014-019 12” LED Arrow Green Signal: APL Number: 650-015-019 12” LED Green Signal: APL Number: 650-013-026 CCTO 0000 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: 16.A.21.p Packet Pg. 979 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 5 19-7607 Traffic Operations Signal Components & Hardware a. Signal Head: Four (4) Section Vertical configuration per MUTCD Part 4, Figure 4D-12 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red, Arrow Yellow, Arrow Yellow, Arrow Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 7) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Right Arrow Red Signal: APL Number: 650-011-027 12” LED Right Arrow Yellow Signal: APL Number: 650-014-019 12” LED Right Arrow Green Signal: APL Number: 650-015-019 CCTO 1512 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Signal Head: Five (5) Section Vertical Cluster configuration per MUTCD Part 4, Figure 4D-11 (B – Typical Arrangements) b. Visor: Tunnel c. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red, Solid Yellow, Solid Green & Arrow Yellow, Arrow Green. d. 15-year performance warranty on optical unit. e. Color of Signal Head: Black f. Material: Aluminum 8) Ordering Number Logic: Mobotrex Traffic Signal housing or approved equivalent & Dialight LED or approved equivalent 12” Die Cast Vehicle Signal: APL Number: 650-002-011 12” LED Red Signal: APL Number: 650-010-038 12” LED Yellow Signal: APL Number: 650-012-023 12” LED Green Signal: APL Number: 650-013-026 12” LED Arrow Yellow Signal: APL Number: 650-014-019 12” LED Arrow Green Signal: APL Number: 650-015-019 CCTO 1513 Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: a. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red, Solid Yellow, Solid Green. b. 15-year performance warranty on optical unit. 9) Ordering Number Logic: CCTO 1513-R 12” Dialight LED Red Signal or approved equivalent APL Number: 650-010-038 10) Ordering Number Logic: CCTO 1513-Y 12” Dialight LED Yellow Signal or approved equivalent APL Number: 650-012-023 11) Ordering Number Logic: CCTO 1513-G 12” Dialight LED Green Signal or approved equivalent APL Number: 650-013-026 CCTO 1513a Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: a. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Arrow Red, Arrow Yellow, Arrow Green. b. 15-year performance warranty on optical unit. 12) Ordering Number Logic: CCTO 1513a-RA 12” Dialight LED Arrow Red Signal or approved equivalent APL Number: 650-011-027 13) Ordering Number Logic: CCTO 1513a-YA 12” Dialight LED Arrow Yellow Signal or approved equivalent APL Number: 650-014-019 14) Ordering Number Logic: CCTO 1513a-GA 12” Dialight LED Arrow Green Signal or approved equivalent APL Number: 650-015-019 CCTO 1513b Signal, Vehicle Traffic Control LED inserts per the following: a. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, U-Turn Red, U-Turn Yellow, U-Turn Green. 16.A.21.p Packet Pg. 980 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6 19-7607 Traffic Operations Signal Components & Hardware b. 15-year performance warranty on optical unit. 15) Ordering Number Logic: CCTO 1513b-RU 12” Dialight LED U-Turn Red Signal or approved equivalent 16) Ordering Number Logic: CCTO 1513b-YU 12” Dialight LED U-Turn Yellow Signal or approved equivalent 17) Ordering Number Logic: CCTO 1513b-GU 12” Dialight LED U-Turn Green Signal or approved equivalent CCTO 1513 Signal, Vehicle Traffic Control LED inserts per the following and per State of Florida Approved Products List: a. Optical Unit: Light Emitting Diode (LED) 12-inch Diameter, Solid Red and Solid Yellow. b. Operating Voltage: 10-30V DC optical unit. c. Lens Type: Tinted 18) Ordering Number Logic: CCTO 1513-RF 12” Dialight 10-30 V DC LED Red Signal, Part Number: 433-1210-005XL or approved equivalent 19) Ordering Number Logic: CCTO 1513-YF 12” Dialight 10-30 V DC LED Yellow Signal, Part Number: 433-3230-905XL or approved equivalent CCTO 1518 Closure Assembly, Vehicle Traffic Control Signal per the following and per State of Florida Approved Products List: a. Signal closure kit b. Stainless steel hardware c. Finish: Black 20) Ordering Number Logic: Pelco Products, Inc. SE-3054-P02 or approved equivalent CCTO 1530 Signal Louver, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. GPL Geometrically Programmed Louvers b. Color: Flat Black c. Size: 12 inch d. Cut-off: 23.5 degrees. e. Visor: Full Circle Visor f. Material: Aluminum g. Universal Clips to fit Eagle, Econolite, TCT, Mark IV, and McCain signals. 21) Ordering Number Logic: Pelco Products Inc. Part Number GL-1010-UC-P34 or approved equivalent APL Number: 650-024-001 CCTO 1532 Signal Visor, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Type: Tunnel b. Color: Flat Black c. Size: 12 inch d. Material: Aluminum 22) Ordering Number Logic: Mobotrex housing Visor or approved equivalent APL Number: 650-002-011 Traffic Signal Back Plates CCTO 3002 Back plates, Horizontal 1-Section Signal Head per the following and per State of Florida Approved Products List: a. Louvered with 2” Reflective 3M Tape b. Material: Aluminum c. Color: Black d. Number of Sections: 1 e. Signal Head Type: Aluminum 23) Ordering Number Logic: CCTO 3002a Transportation Control Systems Part No. BP-5001B-F or approved equivalent APL Number: 650-022-004 24) Ordering Number Logic: 16.A.21.p Packet Pg. 981 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 7 19-7607 Traffic Operations Signal Components & Hardware CCTO 3002b Transportation Control Systems Part No. BP-5001B-C or approved equivalent APL Number: 650-022-004 25) Ordering Number Logic: CCTO 3002c Transportation Control Systems Part No. BP-5001B-N or approved equivalent APL Number: 650-022-004 CCTO 3004 Back plates, Horizontal 2-Section Signal Head per the following and per State of Florida Approved Products List: a. Louvered with 2” Reflective 3M Tape b. Material: Aluminum c. Color: Black d. Number of Sections: 2 e. Signal Head Type: Aluminum 26) Ordering Number Logic: CCTO 3004a Transportation Control Systems Part No. BP-5002B-F or approved equivalent APL Number: 650-022-004 27) Ordering Number Logic: CCTO 3004b Transportation Control Systems Part No. BP-5002B-C or approved equivalent APL Number: 650-022-004 28) Ordering Number Logic: CCTO 3004c Transportation Control Systems Part No. BP-5002B-N or approved equivalent APL Number: 650-022-004 CCTO 3008 Back plates, Horizontal 3-Section Signal Head per the following and per State of Florida Approved Products List: a. Louvered with 2” Reflective 3M Tape b. Material: Aluminum c. Color: Black d. Number of Sections: 3 e. Signal Head Type: Aluminum 29) Ordering Number Logic: CCTO 3008a Transportation Control Systems Part No. BP-5003B-F or approved equivalent APL Number: 650-022-004 30) Ordering Number Logic: CCTO 3008b Transportation Control Systems Part No. BP-5003B-C or approved equivalent APL Number: 650-022-004 31) Ordering Number Logic: CCTO 3008c Transportation Control Systems Part No. BP-5003B-N or approved equivalent APL Number: 650-022-004 CCTO 3010 Back plates, Horizontal 4-Section Signal Head per the following and per State of Florida Approved Products List: a. Louvered with 2” Reflective 3M Tape b. Material: Aluminum c. Color: Black d. Number of Sections: 4 e. Signal Head Type: Aluminum 32) Ordering Number Logic: CCTO 3010a Transportation Control Systems Part No. BP-5004B-F or approved equivalent APL Number: 650-022-004 33) Ordering Number Logic: CCTO 3010b Transportation Control Systems Part No. BP-5004B-C or approved equivalent APL Number: 650-022-004 34) Ordering Number Logic: CCTO 3010c Transportation Control Systems Part No. BP-5004B-N or approved equivalent APL Number: 650-022-004 CCTO 3012 Back plates, Horizontal 5-Section Signal Head per the following and per State of Florida Approved Products List: a. Louvered with 2” Reflective 3M Tape b. Material: Aluminum c. Color: Black 16.A.21.p Packet Pg. 982 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 8 19-7607 Traffic Operations Signal Components & Hardware d. Number of Sections: 5 e. Signal Head Type: Aluminum 35) Ordering Number Logic: CCTO 3012a Transportation Control Systems Part No. BP-5005B-F or approved equivalent APL Number: 650-022-004 36) Ordering Number Logic: CCTO 3012b Transportation Control Systems Part No. BP-5005B-C or approved equivalent APL Number: 650-022-004 37) Ordering Number Logic: CCTO 3012c Transportation Control Systems Part No. BP-5005B-N or approved equivalent APL Number: 650-022-004 CCTO 3014 Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: a. Cluster Mast Arm Mount b. Louvered with 2” Reflective 3M Tape c. Material: Aluminum d. Color: Black e. Number of Sections: 5 f. Signal Head Type: Aluminum 38) Ordering Number Logic: CCTO 3014a Transportation Control Systems Part No. BP-5007B-F or approved equivalent APL Number: 650-022-004 39) Ordering Number Logic: CCTO 3014b Transportation Control Systems Part No. BP-5007B-C or approved equivalent APL Number: 650-022-004 40) Ordering Number Logic: CCTO 3014c Transportation Control Systems Part No. BP-5007B-N or approved equivalent APL Number: 650-022-004 CCTO 3016 Back plates, Vertical 5-Section Signal Head per the following and per State of Florida Approved Products List: a. Cluster Span Wire Mount b. Louvered with 2” Reflective 3M Tape c. Material: Aluminum d. Color: Black e. Number of Sections: 5 f. Signal Head Type: Aluminum 41) Ordering Number Logic: CCTO 3016a Transportation Control Systems Part No. BP-5021B-F or approved equivalent APL Number: 650-022-004 42) Ordering Number Logic: CCTO 3016b Transportation Control Systems Part No. BP-5021B-C or approved equivalent APL Number: 650-022-004 43) Ordering Number Logic: CCTO 3016c Transportation Control Systems Part No. BP-5021B-N or approved equivalent APL Number: 650-022-004 Traffic Signal Heads (Pedestrian) CCTO 1540 Signal, Pedestrian Traffic Control per the following and per State of Florida Approved Products List: a. Housing: 16” X 18” b. Material: Die Cast Aluminum c. Color: Flat Black d. Optical Unit: LED e. Includes Countdown Feature f. Symbol: Filled Icon Hand and Person 16” X 18” Module 9” x 3 ¼” Digits w/Class 3 Message Size (11”x7”) g. Symbol: Full Hand & Full Person with egg crate type visor 44) Ordering Number Logic: Mobotrex housing Model SG7SZ20C3FFF10-21 or approved equivalent & Dialight Corporation, Model 430-6479-805XF or approved equivalent 16.A.21.p Packet Pg. 983 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 9 19-7607 Traffic Operations Signal Components & Hardware Mobotrex Pedestrian housing: APL Number: 653-024-002 Dialight Countdown Pedestrian Module APL Number: 653-022-014 CCTO 1542 Signal, Pedestrian Traffic Control Module per the following and per State of Florida Approved Products List: a. Optical Unit: LED Single module b. Symbol: Filled Icon Hand and Person 16” Module 9” x 3 ¼” Digits w/Class 3 Message Size (11”x7”) c. Includes Countdown Feature d. Symbol: Full Hand & Full Person. 45) Ordering Number Logic: Dialight Corporation, Model 430-6479-805XF or approved equivalent APL Number: 653-022-014 Signal Head Auxiliaries (Vehicular and Pedestrian Signals) CCTO 2902 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Mast Arm Signal Hanger b. Mount: Vertical or Horizontal for Mast Arm c. Material: Aluminum d. Hardware: Stainless Steel e. Cable Length: Minimum 80 inches f. Hanger assembly only 46) Ordering Number Logic: CCTO 2902a Pelco Products, Inc., Model Number: EC-3075-1-80-PNC or approved equivalent APL Number: 659-031-021 47) Ordering Number Logic: CCTO 2902b Pelco Products, Inc., Model Number: EC-3075-2-80-PNC or approved equivalent APL Number: 659-031-021 48) Ordering Number Logic: CCTO 2902c Pelco Products, Inc., Model Number: EC-3075-3-80-PNC or approved equivalent APL Number: 659-031-021 49) Ordering Number Logic: CCTO 2902d Pelco Products, Inc., Model Number: EC-3075-4-80-PNC or approved equivalent APL Number: 659-031-021 50) Ordering Number Logic: CCTO 2902e Pelco Products, Inc., Model Number: EC-3075-5-80-PNC or approved equivalent APL Number: 659-031-021 CCTO 2904 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Mast Arm Signal Hanger b. Mount: Vertical or Horizontal for Mast Arm c. Material: Aluminum d. Hardware: Stainless Steel e. Cable Length: Minimum 120 inches f. Hanger assembly only 51) Ordering Number Logic: CCTO 2904a Pelco Products, Inc. Model Number: EC-3075-1-120-PNC or approved equivalent APL Number: 659-031-021 52) Ordering Number Logic: CCTO 2904b Pelco Products, Inc., Model Number: EC-3075-2-120-PNC or approved equivalent APL Number: 659-031-021 53) Ordering Number Logic: CCTO 2904c Pelco Products, Inc., Model Number: EC-3075-3-120-PNC or approved equivalent APL Number: 659-031-021 54) Ordering Number Logic: CCTO 2904d Pelco Products, Inc., Model Number: EC-3075-4-120-PNC or approved equivalent APL Number: 659-031-021 55) Ordering Number Logic: 16.A.21.p Packet Pg. 984 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 10 19-7607 Traffic Operations Signal Components & Hardware CCTO 2904e Pelco Products, Inc., Model Number: EC-3075-5-120-PNC or approved equivalent APL Number: 659-031-021 CCTO 2906 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Mast Arm Signal Hanger b. Mount: Mast Arm c. Material: Aluminum d. Hardware: Stainless Steel e. Number of cables: 2 f. Cable Length: Minimum 80 and minimum 120 inches 56) Ordering Number Logic: CCTO 2906a Pelco Products, Inc., Model Number: EC-3075-0-80-PNC or approved equivalent APL Number: 659-001-028 57) Ordering Number Logic: CCTO 2906b Pelco Products, Inc., Model Number: EC-3075-0-120-PNC or approved equivalent APL Number: 659-001-028 CCTO 2922 Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Hardware: Stainless Steel c. Number of cables: 1 d. Cable Length: Minimum 96 inches 58) Ordering Number Logic: CCTO 2922a Pelco Products, Inc., Model Number: SP-1006-FL-1-96-PNC or approved equivalent APL Number: 659-031-011 59) Ordering Number Logic: CCTO 2922b Pelco Products, Inc., Model Number: SP-1006-FL-2-96-PNC or approved equivalent APL Number: 659-031-011 60) Ordering Number Logic: CCTO 2922c Pelco Products, Inc., Model Number: SP-1006-FL-3-96-PNC or approved equivalent APL Number: 659-031-011 61) Ordering Number Logic: CCTO 2922d Pelco Products, Inc., Model Number: SP-1006-FL-4-96-PNC or approved equivalent APL Number: 659-031-011 62) Ordering Number Logic: CCTO 2922e Pelco Products, Inc., Model Number: SP-1006-FL-5-96-PNC or approved equivalent APL Number: 659-031-011 CCTO 2922f Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Hardware: Stainless Steel c. Number of cables: 1 d. Cable Length: Minimum 120 inches 63) Ordering Number Logic: CCTO 2922f Pelco Products, Inc., Model Number: SP-1006-FL-1-120-PNC or approved equivalent APL Number: 659-031-011 64) Ordering Number Logic: CCTO 2922g Pelco Products, Inc., Model Number: SP-1006-FL-2-120-PNC or approved equivalent APL Number: 659-031-011 65) Ordering Number Logic: CCTO 2922h Pelco Products, Inc., Model Number: SP-1006-FL-3-120-PNC or approved equivalent APL Number: 659-031-011 66) Ordering Number Logic: CCTO 2922i Pelco Products, Inc., Model Number: SP-1006-FL-4-120-PNC or approved equivalent APL Number: 659-031-011 67) Ordering Number Logic: CCTO 2922j Pelco Products, Inc., Model Number: SP-1006-FL-5-120-PNC or approved equivalent APL Number: 659-031-011 16.A.21.p Packet Pg. 985 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 11 19-7607 Traffic Operations Signal Components & Hardware CCTO 2922k Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Hardware: Stainless Steel c. Number of cables: 1 d. Cable Length: Minimum 144 inches 68) Ordering Number Logic: CCTO 2922k Pelco Products, Inc., Model Number: SP-1006-FL-1-144-PNC or approved equivalent APL Number: 659-031-011 69) Ordering Number Logic: CCTO 2922l Pelco Products, Inc., Model Number: SP-1006-FL-2-144-PNC or approved equivalent APL Number: 659-031-011 70) Ordering Number Logic: CCTO 2922m Pelco Products, Inc., Model Number: SP-1006-FL-3-144-PNC or approved equivalent APL Number: 659-031-011 71) Ordering Number Logic: CCTO 2922n Pelco Products, Inc., Model Number: SP-1006-FL-4-144-PNC or approved equivalent APL Number: 659-031-011 72) Ordering Number Logic: CCTO 2922o Pelco Products, Inc., Model Number: SP-1006-FL-5-144-PNC or approved equivalent APL Number: 659-031-011 CCTO 2921 Signal, Vehicle Traffic Control per the following and per State of Florida Approved Products List: a. Mast Arm Signal Hanger b. Mount: Vertical Cluster for Mast Arm c. Material: Aluminum d. Hardware: Stainless Steel e. Number of cables: 1 f. Cable Length: 96 to 144 inches 73) Ordering Number Logic: CCTO 2921a Pelco Products, Inc., Model Number: SP-1008-FL-96-PNC or approved equivalent APL Number: 659-031-012 74) Ordering Number Logic: CCTO 2921b Pelco Products, Inc., Model Number: SP-1008-FL-120-PNC or approved equivalent APL Number: 659-031-012 75) Ordering Number Logic: CCTO 2921c Pelco Products, Inc., Model Number: SP-1008-FL-144-PNC or approved equivalent APL Number: 659-031-012 CCTO 2908 Mast arm Astro-Brac Stellar clamp Mount Assembly per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Hardware: Stainless Steel c. Number of cables: 1 d. Cable Length: Minimum 96 inches to minimum 144 inches 76) Ordering Number Logic: CCTO 2908a Pelco Products, Inc. Model Number: SP-1079-FL-96-PNC or approved equivalent APL Number: 659-031-009 77) Ordering Number Logic: CCTO 2908b Pelco Products, Inc. Model Number: SP-1079-FL-120-PNC or approved equivalent APL Number: 659-031-009 78) Ordering Number Logic: CCTO 2908c Pelco Products, Inc. Model Number: SP-1079-FL-144-PNC or approved equivalent APL Number: 659-031-009 CCTO 2928 Mast arm Astro-Brac Steller Articulating clamp Mount Assembly per the following and per State of Florida Approved Products List: a. Bracket Articulated Mounting. b. Finish: Standard c. Hardware: Stainless Steel d. Cable Length: Minimum 96 inches to minimum 144” 16.A.21.p Packet Pg. 986 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 12 19-7607 Traffic Operations Signal Components & Hardware 79) Ordering Number Logic: CCTO 2928a Pelco Products, Inc., Part No. SP-1118-FL-96-PNC or approved equivalent APL Number: 659-031-019 80) Ordering Number Logic: CCTO 2928b Pelco Products, Inc., Part No. SP-1118-FL-120-PNC or approved equivalent APL Number: 659-031-019 81) Ordering Number Logic: CCTO 2928c Pelco Products, Inc., Part No. SP-1118-FL-144-PNC or approved equivalent APL Number: 659-031-019 CCTO 2926 Hanger Assembly, Tri-Stud per the following and per State of Florida Approved Products List: a. Span Wire Clamp, Aluminum b. Cast Aluminum Upper and Lower Hanger c. Includes Stainless Steel Hardware 82) Ordering Number Logic: Pelco Products, Inc., Part No. SP-1050-FL-PNC or approved equivalent APL Number: 659-037-003 CCTO 2924 Hanger, Disconnect per the following and per State of Florida Approved Products List: a. Door: Single Door b. Material: Cast Aluminum with Stainless Steel Hardware. c. Top: Non-Threaded Top & Tri-Stud Hub d. Side Entrance Cover: Neoprene Grommet. e. Color: Flat Black f. Include Disconnect Hub Assembly, Tri-Stud g. Exclude Terminal Block & Harness Assemblies 83) Ordering Number Logic: Pelco Products Inc., Part No.: SP-1021-FL-2-P34 or approved equivalent APL Number: 659-004-018 CCTO 2925 Disconnect Hub Assembly per the following and per State of Florida Approved Products List: a. Material: Cast Aluminum with Stainless Steel Hardware. b. Color: Flat Black c. Type: Tri-Stud 84) Ordering Number Logic: Pelco Products Inc., Part No.: SE-5033-P34 or approved equivalent APL Number: 659-004-018 CCTO 2940 Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List: a. Direction: 2-Way b. Material: Aluminum c. Tri-stud kit Material: Stainless Steel. d. Color: Flat Black 85) Ordering Number Logic: Pelco Products, Inc., Part No. SP-1026-FL-P34 or approved equivalent APL Number: 659-001-030 CCTO 2942 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. a. Direction: 2-Way b. Material: Aluminum c. Hardware Kit Material: Stainless Steel. d. Color: Flat Black 86) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1027-FL-P34 or approved equivalent APL Number: 659-001-031 CCTO 2944 16.A.21.p Packet Pg. 987 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 13 19-7607 Traffic Operations Signal Components & Hardware Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List. a. Direction: 3-Way b. Material: Aluminum c. Tri-stud kit Material: Stainless Steel. d. Color: Flat Black 87) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1015-FL-P34 or approved equivalent APL Number: 659-001-036 CCTO 2946 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. a. Direction: 3-Way b. Material: Aluminum c. Hardware Kit Material: Stainless Steel. d. Color: Flat Black 88) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1016-FL-P34 or approved equivalent APL Number: 659-001-034 CCTO 2948 Bracket Assembly, Tri-Stud Upper Arm per the following and per State of Florida Approved Products List. a. Direction: 4-Way b. Material: Aluminum c. Tri-stud kit Material: Stainless Steel. d. Color: Flat Black 89) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1017-FL-P34 or approved equivalent APL Number: 659-001-037 CCTO 2950 Bracket Assembly, Single Stud Lower Arm per the following and per State of Florida Approved Products List. a. Direction: 4-Way b. Material: Aluminum c. Hardware Kit Material: Stainless Steel. d. Color: Flat Black 90) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1018-FL-P34 or approved equivalent APL Number: 659-001-035 CCTO 1602 Pedestrian Bracket Assemblies, Aluminum side of pole, Tri-Stud per the following and per State of Florida Approved Products List: a. Tri-Stud Upper Arm Assembly b. 1-way, Aluminum c. Stainless Steel Fasteners d. Color: Black 91) Ordering Number Logic: Pelco Products Inc. Part Number: SP-1011-FL-P34 or approved equivalent APL Number: 653-001-004 CCTO 1604 Pedestrian Bracket Assemblies, Aluminum side of pole, Tri-Stud per the following and per State of Florida Approved Products List: a. Tri-Stud Lower Arm Assembly b. 1-way, Aluminum c. Stainless Steel Fasteners d. Color: Black 92) Ordering Number Logic: Pelco Products Inc. Part Number: SP-1012-FL-P34 or approved equivalent APL Number: 653-001-003 CCTO 1606 Hub Plate, Flat Back for Pedestrian Signal Mount per the following and per State of Florida Approved Products List: a. Color: Black 16.A.21.p Packet Pg. 988 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 14 19-7607 Traffic Operations Signal Components & Hardware b. Material: Aluminum c. Threads: 1 ½” NPS 93) Ordering Number Logic: Pelco Products Inc., Part Number: SE-0415-P34 or approved equivalent APL Number: 659-021-004 CCTO 1608 Hub Plate, Pedestrian Signal Mount for Large Pole per the following and per State of Florida Approved Products List: a. Color: Black b. Material: Aluminum c. Threads: 1 ½” NPS 94) Ordering Number Logic: Pelco Products Inc., Part Number: SE-0357-P34 or approved equivalent APL Number: 659-021-003 CCTO 1610 Hub Plate, Pedestrian Signal Mount for 4” Pole per the following and per State of Florida Approved Products List: a. Color: Black b. Material: Aluminum c. Threads: 1 ½” NPS 95) Ordering Number Logic: Pelco Products Inc., Part Number: EC-2053-C-P34 or approved equivalent APL Number: 653-006-010 CCTO 2108 Cabinet Accessories per the following and per State of Florida Approved Products List: a. Mounting Kit to install flasher cabinet to 4” post (4 1/2 “ OD) b. Stainless Steel Fasteners c. Paint: None 96) Ordering Number Logic: Pelco Products Inc., Part Number: SE-1100-PNC or approved equivalent CCTO 2952 Post Top Adapter (Slip Fitter), Pedestrian Traffic Control Signal per the following and per State of Florida Approved Products List a. Aluminum Tri-Stud Adapter for use with 4-1/2 inch OD Aluminum Pole b. Fasteners: Stainless Steel c. Color: Natural 97) Ordering Number Logic: CCTO 2952a Pelco Products, Inc. Part No., EC-3004-T-PNC or approved equivalent APL Number:659-009-001 98) Ordering Number Logic: CCTO 2952b Pelco Products, Inc. Part No., SP-1034-FL-PNC or approved equivalent APL Number: 659-009-013 CCTO 2954 Pole, Spun Aluminum, Schedule 40, per the following and per State of Florida Approved Products List: a. Size: 4.5 inch OD b. Length: 4’ to 14’ c. Material: Aluminum d. Threaded: One End e. Finish: Natural 99) Ordering Number Logic: CCTO 2954a Pelco Products, Inc. Part No., PB-5100-4-PNC or approved equivalent 100) Ordering Number Logic: CCTO 2954b Pelco Products, Inc. Part No., PB-5100-5-PNC or approved equivalent 101) Ordering Number Logic: CCTO 2954c Pelco Products, Inc. Part No., PB-5100-6-PNC or approved equivalent 102) Ordering Number Logic: CCTO 2954d Pelco Products, Inc. Part No., PB-5100-7-PNC or approved equivalent 103) Ordering Number Logic: CCTO 2954e Pelco Products, Inc. Part No., PB-5100-8-PNC or approved equivalent 104) Ordering Number Logic: 16.A.21.p Packet Pg. 989 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 15 19-7607 Traffic Operations Signal Components & Hardware CCTO 2954f Pelco Products, Inc. Part No., PB-5100-9-PNC or approved equivalent 105) Ordering Number Logic: CCTO 2954g Pelco Products, Inc. Part No., PB-5100-10-PNC or approved equivalent 106) Ordering Number Logic: CCTO 2954h Pelco Products, Inc. Part No., PB-5100-11-PNC or approved equivalent 107) Ordering Number Logic: CCTO 2954i Pelco Products, Inc. Part No., PB-5100-12-PNC or approved equivalent 108) Ordering Number Logic: CCTO 2954j Pelco Products, Inc. Part No., PB-5100-13-PNC or approved equivalent 109) Ordering Number Logic: CCTO 2954k Pelco Products, Inc. Part No., PB-5100-14-PNC or approved equivalent APL Number: ________________________________ CCTO 2955 Pole, Spun Aluminum, Schedule 80, per the following and per State of Florida Approved Products List: a. Size: 4.5 inch OD b. Length: 4’ to 14’ c. Material: Aluminum d. Threaded: One End e. Finish: Natural 110) Ordering Number Logic: CCTO 2955a Pelco Products, Inc. Part No., PB-5102-4-PNC or approved equivalent APL Number: 746-001-008 111) Ordering Number Logic: CCTO 2955b Pelco Products, Inc. Part No., PB-5102-5-PNC or approved equivalent APL Number: 746-001-008 112) Ordering Number Logic: CCTO 2955c Pelco Products, Inc. Part No., PB-5102-6-PNC or approved equivalent APL Number: 746-001-008 113) Ordering Number Logic: CCTO 2955d Pelco Products, Inc. Part No., PB-5102-7-PNC or approved equivalent APL Number: 746-001-008 114) Ordering Number Logic: CCTO 2955e Pelco Products, Inc. Part No., PB-5102-8-PNC or approved equivalent APL Number: 746-001-008 115) Ordering Number Logic: CCTO 2955f Pelco Products, Inc. Part No., PB-5102-9-PNC or approved equivalent APL Number: 746-001-008 116) Ordering Number Logic: CCTO 2955g Pelco Products, Inc. Part No., PB-5102-10-PNC or approved equivalent APL Number: 746-001-008 117) Ordering Number Logic: CCTO 2955h Pelco Products, Inc. Part No., PB-5102-11-PNC or approved equivalent APL Number: 746-001-008 118) Ordering Number Logic: CCTO 2955i Pelco Products, Inc. Part No., PB-5102-12-PNC or approved equivalent APL Number: 746-001-008 119) Ordering Number Logic: CCTO 2955j Pelco Products, Inc. Part No., PB-5102-13-PNC or approved equivalent APL Number: 746-001-008 120) Ordering Number Logic: CCTO 2955k Pelco Products, Inc. Part No., PB-5102-14-PNC or approved equivalent APL Number: 746-001-008 CCTO 2959 Sign Mountings per the following and per State of Florida Approved Products List: a. Anchor Bolt Sets b. Quantity: Set of 4 c. Anchor bolt Size: 3/4”-10NC d. Length: 18” e. Paint: None f. Exterior: Galvanized 16.A.21.p Packet Pg. 990 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16 19-7607 Traffic Operations Signal Components & Hardware g. Includes 4 each: Bolts, Washers and Nuts 121) Ordering Number Logic: Pelco Products Inc., Part Number: PB-5543-GLV CCTO 2960 Pedestal Base, Aluminum, per the following and per State of Florida Approved Products List: a. Size: 13-5/8 inches x 13-5/8 inches x 15 inches high per the following: b. Material: Aluminum with plastic Door c. Threaded for 4.5 inch OD aluminum pole d. Finish: Natural e. Include grounding lug f. No set screws in collar 122) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1116-FL-GL-PNC or approved equivalent APL Number: 646-001-001 CCTO 2962 Collar Assy., Square Base, Aluminum, per the following and per State of Florida Approved Products List: a. Finish: Natural 123) Ordering Number Logic: Pelco Products, Inc. Part No. PB-5325-PNC or approved equivalent APL Number: 646-001-005 CCTO 2984 Traffic Signal Hardware, Components, Pipe Fittings per the following and per State of Florida Approved Products List: a. 1½” Grommet, Neoprene w/ Diaphragm for disconnect cable openings b. Color: Black 124) Ordering Number Logic: Pelco Products Inc. Part No. SE-0449-PNC or approved equivalent CCTO 2986 Traffic Signal Hardware, Components, Pipe Fittings per the following and per State of Florida Approved Products List: a. Double Serrated Lock ring, Aluminum 125) Ordering Number Logic: Pelco Products Inc. Part No. SE-0451-PNC or approved equivalent CCTO 2988 Traffic Signal Hardware, Components, Span Wire per the following and per State of Florida Approved Products List: a. Tri-bolt Adapter, 1 ½, NPS, Aluminum 126) Ordering Number Logic: Pelco Products Inc. Part No. SE-0502-PNC or approved CCTO 2990 Traffic Signal Hardware, Span wire Hardware Kits per the following and per State of Florida Approved Products List: a. Signal to Signal Mounting Kit 5/16-18 b. Stainless Slotted Washer & Stainless Hardware 127) Ordering Number Logic: Pelco Products Inc. Part No. SE-4112-SS or approved equivalent CCTO 2994 Traffic Signal Hardware, Extension (Extender) per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Length: 72 inches 128) Ordering Number Logic: Pelco Products Inc. Part No. SE-0507-72-PNC or approved equivalent APL Number: 659-015-003 CCTO 2995 Traffic Signal Hardware, 1-Way Tri-Stud for 12” Signals, 4-1/2” OD Pole) per the following: a. Material: Aluminum b. Includes: SE-5123 Hardware Kit c. Paint color: Black 16.A.21.p Packet Pg. 991 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 17 19-7607 Traffic Operations Signal Components & Hardware 129) Ordering Number Logic: Pelco Products Inc. Part No. SE-0567-P34 or approved equivalent CCTO 2996 Tee, Aluminum with Tri-Stud Adapter on long end & 1 ½ inch threaded on other ends per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Color: Black c. Hardware: Stainless 130) Ordering Number Logic: Pelco Products, Inc. Part No. SE-0513-P34 or approved equivalent CCTO 2998 Ty-back, Cable restraining Clamp Assembly per the following and per State of Florida Approved Products List: a. Hardware: Stainless 131) Ordering Number Logic: Pelco Products, Inc. Part No. AB-0506-ZN2 or approved equivalent CCTO 3026 Signal Spacer for 12” Signal Head per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Color: Black c. Length: 13 ½ inches 132) Ordering Number Logic: Pelco Products, Inc., Part No. EC-3012 or approved equivalent APL Number: 659-003-002 CCTO 3030 Pole Cap per the following and per State of Florida Approved Products List: a. Acorn Type b. Material: Aluminum c. For 4-1/2” O.D. Pole d. Fasteners: Stainless Steel e. Paint: None 133) Ordering Number Logic: Pelco Products Inc., Part Number: PB-5401-PNC or approved equivalent APL Number: 746-001-009 Detection (Pedestrian Detection System) CCTO 1806 Pushbutton, Pedestrian Detector (Momentary LED Model) per the following and per State of Florida Approved Products List: a. Minimum 2 -inch Actuator, A.D.A. Compliant. b. Operating Force: 2 lbs. Maximum c. Operating Voltage: 12-36VDC or 9-25VAC RMS d. On Resistance: 85 Ω Typical. e. Operating Mode: Approx. 0.025 sec flash each time button is pressed. f. Viewing Angle: 155° 134) Ordering Number Logic: Polara Bulldog III BDL3-B or approved equivalent CCTO 1808 Pushbutton, Pedestrian Detector, Aluminum Push Button Cup, per the following and per State of Florida Approved Products List: a. Aluminum cup for mounting the BullDog Pedestrian Detector. b. Color: Black 135) Ordering Number Logic: Polara Aluminum Push Button Cup APBC2-B or approved equivalent CCTO 1810 Pushbutton, Pedestrian Detector, Adapter, per the following and per State of Florida Approved Products List: a. Polara round button Adapter b. Color: Black 16.A.21.p Packet Pg. 992 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 18 19-7607 Traffic Operations Signal Components & Hardware 136) Ordering Number Logic: Polara Adapter PA-1B or approved equivalent CCTO 1812 Pushbutton, Pedestrian Detector, Audible/Tactile Pedestrian Detector with Pedestrian Station Monitor, per the following and per State of Florida Approved Products List: a. Push Button: ADA Compliant, raised tactile arrow on button, solid state switch rated to 20 million actuations minimum. b. Construction: Die-cast aluminum, powder coated Black c. Confirmation of button push via latching LED, sound, and vibrotactile bounce. d. Direction of travel (with extended button push). e. Standard locating tone during Don't Walk (and clearance if desired). f. Cuckoo, chirp, or standard voice message during walk. g. Vibrating button during walk. h. Standard locating tone, custom sound, or verbal countdown during PED clearance. i. All sounds automatically adjust to ambient over 60dB range. j. Most sounds can have minimum and maximum volume independently set. k. All sounds are synchronized. l. Extended button push can turn on, boost volumes, and/or mute all sounds except those on activated crosswalk. m. Special emergency messages available. n. Custom locating tone o. Informational message p. Custom walk sounds/message q. Custom clearance sound r. Multiple languages (up to three, selectable by user) s. 9” x15” MUTCD R10-3e pedestrian sign (Option A) 137) Ordering Number Logic: Polara 2 Wire Navigator Push Button Station EN23TN1-B or approved equivalent APL Number: 665-004-004 CCTO 1814 Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: a. One CCU shall control a minimum of 16 Push Button Stations. b. Ped Walk / Don't Walk Inputs: Optically Isolated 80-150 Volts AC/DC 5mA Maximum. c. General Purpose Outputs & Ped Outputs: Optically Isolated 36 Volts AC/DC Peak .3A Solid State Fused Contact Closure. d. Fault Output: Normally Open and Closed Relay Contacts 125 Volts AC/DC 1A Maximum. e. Channel A, B, C, D PBS Power Outputs: Nominal 22 Volts DC, Short Circuit Protected - Auto Recovering. f. General Purpose Inputs: 10 - 36 Volts AC/DC Peak 10mA Maximum, Optically Isolated. g. Environmental: Operating and Storage -30°F (-34°C) to 165°F (74°C) 0-100 Humidity Non-Condensing. 138) Ordering Number Logic: Polara 2 Wire Navigator Central Control Unit Part No. CCU2EN or approved equivalent APL Number: 665-004-004 CCTO 1816 Pushbutton, Pedestrian Detector, Audible/Tactile Pedestrian Detector with Pedestrian Station Monitor, per the following and per State of Florida Approved Products List: a. Push Button: ADA Compliant, raised tactile arrow on button, solid state switch rated to 20 million actuations minimum. b. Operates over a single pair of wires c. All push button stations wired in parallel, individually assignable to any phase d. 16+ buttons can operate with a single Control Unit* e. All sounds are synchronized f. 4 Locate Tone selectable options g. 14 Walk Sound selectable options, 3 of them custom options h. 7 Clearance Sound selectable options i. Walk, Clearance and Don’t Walk sounds adjust automatically to ambient j. Separate ambient response settings for Locate Tone (for quiet ambient conditions) k. Most sounds have independent Min/Max settable limits l. Button vibrates during Walk m. Button push confirmed by latching LED, tactile bounce, and audible “wait” sound n. Extended button push can boost volume for next Walk and Clearance o. Direction of travel message with extended button push, capable p. Extended Push Priority: Mutes all but selected crosswalk, capable 16.A.21.p Packet Pg. 993 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 19 19-7607 Traffic Operations Signal Components & Hardware q. Extended Push Activation Settings: 0-6 second range, .5 second increments r. Beaconing and Ping Pong features available s. Select audio messages, change settings, and perform firmware updates wirelessly using OS devices, or a Windows PC with Polara’s Bluetooth Dongle (P/N: iN-DGL) t. Built in Health/Event logging feature, up to 300 events u. False Walk Detection: Four independent checks v. External Speaker-Option at time of order w. External Button Input for bike lane, horses, etc. x. 9” x12” MUTCD R10-3 pedestrian sign 139) Ordering Number Logic: Polara 2 Wire Navigator Push Button Station iN29VN1-B or approved equivalent APL Number: 665-004-008 CCTO 1816a Pushbutton, Pedestrian Detector, Audible/Tactile Central Control Unit, per the following and per State of Florida Approved Products List: a. SDLC straight line cable shall be 6 feet in length. b. Ped Walk / Don’t Walk Inputs (from load switches, via 50 pin harness): Optically Isolated 80 – 150 Volts AC/DC, 5mA max. c. Ped Call Outputs (to traffic controller, via 50 pin harness): Optically Isolated 36 Volts AC/DC peak 300mA Solid State Fused Contact Closure d. PBS Power Output: Nominal 24 Volts DC, Short Circuit Protected - Auto Recovering e. General Purpose Inputs: 10 – 36 Volts AC/DC peak, 10mA max, Optically Isolated f. Environmental Operating: -34ºC (-30ºF) to +74ºC (+165ºF), g. Environmental Storage: -45ºC (-50ºF) to +85ºC (+185ºF) 140) Ordering Number Logic: CCTO 1816aa Polara, 2 Wire Navigator Central Control Unit Part No. iCCU-S or approved equivalent APL Number: 665-004-008 141) Ordering Number Logic: CCTO 1816ab Polara, Interconnect Board Part No. iN2-ICB or approved equivalent APL Number: 665-004-008 142) Ordering Number Logic: CCTO 1816ac Polara, 50 Pin Connector Cable Assembly Part No. 850-390 or approved equivalent APL Number: 665-004-008 143) Ordering Number Logic: CCTO 1816ad Polara Standard SDLC Cable Part No. iN2-SDLC-CABLE or approved equivalent APL Number: 665-004-008 144) Ordering Number Logic: CCTO 1816ae Polara, 2 conductor jacketed cable Part No. iN2-2WCABLE or approved equivalent APL Number: 665-004-008 Detection (Inductive Loop Detector) CCTO 1705 Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: Inductive loop detectors shall meet the following specifications: a. LCD View Screens: The Loop Frequency, -ΔL/L%, Loop Inductance, DEFLECTOMETER® Pie Graph, DEFLECTOMETER® Numeric Optimizer, DEFLECTOMETER® Streaming Graph, Frequency Stability Graph, Sensitivity Level, Mode of Operation, and Vehicle Counting Accumulator can be viewed on the front panel LCD for each channel simultaneously. b. DEFLECTOMETER® Pie Graph & Numeric Value Indictor: The LCD screen displays a pie graph which assists in determining the optimum sensitivity setting by showing the change in inductance caused by traffic moving over the loop. Changes to the sensitivity setting are reflected on the graph in real time during a Call state. Optimum sensitivity setting is reached when the DEFLECTOMETER® value reaches the value of 10 or 50% of the graph, based on typical size vehicles. 16.A.21.p Packet Pg. 994 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 20 19-7607 Traffic Operations Signal Components & Hardware c. DEFLECTOMETER® Streaming Graph: While the DEFLECTOMETER® pie graph displays an instantaneous indication of the current Call strength, the Streaming Graph display graphically shows the Call strength over time. The horizontal axis represents a six second interval. The vertical axis represents Call strength. The graph streams when there is a Call present. d. Frequency Stability Graph: The frequency stability graph provides the capability to analyze each frequency level to ensure proper selection of the nominal loop tuning frequency. The XY graph displays detector frequency samples with respect to the reference. A variation from the center of the graph depicts frequency instability on the channel. Basically a thin smooth graph offers a more optimum frequency selection over a thick uneven line. e. Paired Channel Functions Directional Logic and 3rd Car Logic: When both of the paired channels have detection in Directional Logic mode, the last channel to have detection will output a CALL until the detection for the last channel ends, even if the detection ends for the first channel. This feature is intended to be used in freeway ramps for wrong way detection and left turn lanes where other movements in the intersection tend to clip the detection zone of the left turn lane. 3rd Car Logic provides a Call output when both channels are in the Call state. 3rd Car Logic is typically used in left turn queues to provide logic for Protected-Permissive movements. f. AccurateCount Mode: Model ORACLE 2EC Only AccurateCount mode produces a secondary output in addition to the primary CALL output for each vehicle entering the loop zone. Loop configurations ranges from a single loop to eight loops connected together in series. The LCD screen will report counts from the secondary “Count” outputs and is capable of accumulating 999,999 vehicle counts per channel before rolling over to zero. Note: The Count Accumulator screen can be used to view the AccurateCount totals. g. Programmable Navigation: The ORACLE “ENHANCED” Series provides a flexible and simple programming process via the front panel bidirectional toggle switches. Moving through the menu choices has never been easier. The new QuikSet mode navigates to commonly used menu items quickly. h. Loop Fault History Log: For each channel, the LCD screen can display the last 25 loop fault conditions and power events. i. Loop Inductance Display Indicator: In the “Induct” display mode the LCD screen displays the equivalent system loop inductance (loop and lead-in inductance) within the range of 20 to 2500 microHenries. j. -ΔL/L Percentage Indicator: The “Induct” display mode shows the percentage of inductance change during the CALL state. k. LCD Display Back Lighting and Heater: The Liquid Crystal Display (LCD) incorporates a white LED backlight. The backlight improves visibility in poor lighting conditions. A built-in heater improves operation in very cold temperatures. l. Variable Character Channel ID: Up to five characters or numbers can be selected to identify each channel of detection. m. Point Probe Micro Sensor Support: Model ORACLE 2EC Only The ORACLE 2EC model support the use of point probe type micro sensors. Consult the factory for compatibility details. 145) Ordering Number Logic: CCTO 1705a Eberle Design Inc., EDI, Part No. 2E or approved equivalent APL Number: 660-017-007 146) Ordering Number Logic: 16.A.21.p Packet Pg. 995 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 21 19-7607 Traffic Operations Signal Components & Hardware CCTO 1705b Ordering Number Logic: Eberle Design Inc., EDI, Part No. 2EC or approved equivalent APL Number: 660-017-007 CCTO 1704 Detector, Dual Channel Rack Mount Loop with Delay & Extend Detection per the following and per State of Florida Approved Products List: Inductive loop detectors shall meet the following specifications a. Back-lit LCD screen that displays complete detector status and function settings. b. TrueCount version (Model 1201 Only) provides 97% to 99% count accuracy when used with either a single long loop or multiple 6’ x 6’ loops connected together. c. Audible detect signal (buzzer) facilitates loop and / or detector troubleshooting. d. Upgrades or addition of user specific options are accomplished by changing the socket mounted processor. e. Push button programming. f. All programmed detector parameters are stored in non-volatile memory. g. Directional logic capability. 147) Ordering Number Logic: CCTO 1704a Eberle Design Inc., Reno A&E, Part No. C-1200 or approved equivalent APL Number: 660-017-003 148) Ordering Number Logic: CCTO 1704b Eberle Design Inc., Reno A&E, Part No. C-1201 or approved equivalent APL Number: 660-017-004 Detection (Video Vehicle Detection System) CCTO 1720 Wide Dynamic Range Video Camera per the following and per State of Florida Approved Products List: a. Iteris RZ-4A WDR Video Camera Vehicle Detection Unit b. Compatible with the Collier County Iteris Video Detection System 149) Ordering Number Logic: Iteris RZ-4A WDR (Advanced Wide Dynamic range) Color Video Detection Camera or approved equivalent APL Number: 660-015-012 CCTO 1722 Combination Wide Dynamic Range Video Camera and Radar dilemma zone detection Camera per the following and per State of Florida Approved Products List: a. Iteris Vantage Vector Hybrid Video-Radar Camera Vehicle Detection Unit b. Compatible with the Collier County Iteris Video Detection System c. Video detection Range to 400 ft d. Radar detection Range to 600 ft 150) Ordering Number Logic: Iteris Vantage Vector Hybrid Color Video Detection Camera or approved equivalent APL Number: 660-015-031 CCTO 1723 Span Mounted Vantage SmartSpan Video Camera per the following and per State of Florida Approved Products List: a. Iteris Vantage SmartSpan Video Camera Vehicle Detection Unit b. Compatible with the Collier County Iteris Video Detection System 151) Ordering Number Logic: Iteris Vantage SmartSpan Color Video Detection Camera or approved equivalent APL Number: 660-015-033 CCTO 1724 Video Vehicle Processor Unit per the following and per State of Florida Approved Products List: a. Iteris Vantage Edge 2 Video Processor: b. Number of Processors: 2 c. TS2 cabinet compatible d. Compatible with the Collier County Iteris Video Detection System 152) Ordering Number Logic: Iteris Vantage Edge 2, Dual Channel Video Processor or approved equivalent APL Number: 660-015-012 CCTO 1726 16.A.21.p Packet Pg. 996 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 22 19-7607 Traffic Operations Signal Components & Hardware Quad-view remote communications module per the following and per State of Florida Approved Products List: a. Iteris Vantage EdgeConnect Module: b. TS2 cabinet compatible c. 10/100Base-T Ethernet support d. MPEG4/H.264 video compression e. Single quad view video stream or four independent single streams f. Compatible with the Collier County Iteris Video Detection System 153) Ordering Number Logic: Iteris Vantage EdgeConnect Module or approved equivalent APL Number: 660-015-012 CCTO 1728 Integrated TS-2 Bus Interface Unit (BIU) module per the following and per State of Florida Approved Products List: a. Iteris Vantage EDGE2-SDLC-IM (TS2 Interface Module): b. 64 detector output channels c. NEMA TS2 Publication Standard compliant d. Call Status LED’s and diagnostics e. Compatible with the Collier County Iteris Video Detection System 154) Ordering Number Logic: Iteris Vantage EDGE2-SDLC-IM or approved equivalent APL Number: 660-015-012 CCTO 1732 Surge Suppression Panel per the following and per State of Florida Approved Products List: a. Iteris Din Rail Mounted Suppression Panel b. Two (2) Surge Panel for two video camera application c. Four (4) Surge Panel for four video camera application d. Six (6) Surge Panel for six video camera application e. Edco CX06-M, Surge Protective Device f. Duplex Outlet g. Camera Terminal Strips h. Din Rail Mounted Coax Surge Suppression 155) Ordering Number Logic: CCTO 1732a Iteris Din Rail Mounted Suppression Panel for two video detection camera application or approved equivalent APL Number: 66013721212061 156) Ordering Number Logic: CCTO 1732b Iteris Din Rail Mounted Suppression Panel for four video detection camera application or approved equivalent APL Number: 66013721212061 157) Ordering Number Logic: CCTO 1732c Iteris Din Rail Mounted Suppression Panel for six video detection camera application or approved equivalent APL Number: 66013721212061 CCTO 1734 Video Camera Detection Cable per the following: a. Composite Coaxial RG-59/U / 16 AWG Power Cable b. Element 1: Coaxial RG-59/U c. Element 2: 3 Conductor/16 AWG Stranded d. Length: 1000 ft. spool 158) Ordering Number Logic: Multicom Inc. Part Number: M-CC-59PETC-98/2-16/3-PE-A or approved equivalent CCTO 1736 LCD CCTV Color Video Detection Monitor per the following: a. Diagonal Size: 7 inch b. Backlight: LED c. Aspect Ratio: 16:9 d. Video inputs: 2 RCA a. Display Resolution: 480 × 234 e. Display: Color 159) Ordering Number Logic: Lilliput 7” LCD CCTV Video Monitor Part Number: 319GL-70NP or approved equivalent 16.A.21.p Packet Pg. 997 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 23 19-7607 Traffic Operations Signal Components & Hardware CCTO 1740 BNC Connector for Iteris Video Detection per the following: a. Product: connectors b. Type: BNC c. RF Series: BNC d. Impedance: 75 Ohms 160) Ordering Number Logic: Amphenol 31-71032 or approved Equivalent CCTO 1730 Video Detection Mast Arm Mounting Bracket per the following and per State of Florida Approved Products List: a. Function: Installation of Iteris Video Detection Camera b. Manufacturer: Pelco Products Inc. c. Hardware: Stainless Steel 161) Ordering Number Logic: CCTO 1730a Pelco Products Inc., Part Number: SP-1106-FL-1PC-74-84-PNC or approved equivalent APL Number: 659-035-005 162) Ordering Number Logic: CCTO 1730b Pelco Products Inc., Part Number: SP-1106-FL-2PC-74-84-PNC or approved equivalent APL Number: 659-035-005 CCTO 1731 Video Detection Mast Arm Mounting Bracket per the following and per State of Florida Approved Products List: a. Function: Installation of Video Detection Camera b. Manufacturer: Pelco Products Inc. c. Hardware: Stainless Steel 163) Ordering Number Logic: Pelco Products Inc., Part Number: SP-1114-FL-84-PNC or approved equivalent APL Number: 659-035-004 Detection (Microwave Vehicle Detection System) CCTO 1750 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix SmartSensor Advance Extrended Range Dilemma Zone Protection System b. Number of Approaches: 1 c. Includes the following Components: • 1 - 10.525 GHz SmartSensor Advance Extended Range radar traffic sensor. • 1 - SmartSensor mounting kit • 1 - SmartSensor Manager Advance setup software • 1 - SmartSensor Advance Extended Range User Guide • 1 - SmartSensor Advance Extended Range Quick-reference Guide d. Compatible with the TS2 Type 1 traffic signal cabinet. e. Excludes 6 conductor cable and connector 164) Ordering Number Logic: One approach Wavetronix SmartSensor Advance Extended Range Dilemma Zone Protection or approved equivalent APL Number: 660-026-002 CCTO 1779 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix SmartSensor Matrix Presence Detector b. Number of Approaches: 1 c. Includes the following Components: • 1 - SmartSensor Matrix Presence Detector. • 1 - SmartSensor Matrix mounting kit • 1 - SmartSensor Manager Matrix setup software • 1 - SmartSensor Matrix User Guide d. Compatible with the TS2 Type 1 traffic signal cabinet. e. Excludes 6 conductor cable and connector 165) Ordering Number Logic: One approach Wavetronix SmartSensor Matrix, Model Number: SS225 or approved equivalent 16.A.21.p Packet Pg. 998 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 24 19-7607 Traffic Operations Signal Components & Hardware APL Number: 660-018-004 CCTO 1783 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix Click 650 or Click 656 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors. b. Includes the following Components: • 1 - Click 650 or Click 656 • 1 – SDLC Cable 310-0411 • 1 - SmartSensor Manager Advance (SSMA) software • 1 – Click 65x Series User Guide c. Compatible with the TS2 Type 1 traffic signal cabinet. d. Excludes 6 conductor cable and connector 166) Ordering Number Logic: CCTO 1783a Click 650 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors approved equivalent APL Number: 660-018-004 167) Ordering Number Logic: CCTO 1783b Click 656 Cabinet Interface Unit for SmartSensor Matrix or Advance Sensors approved equivalent APL Number: 660-018-004 CCTO 1752 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Cable and connectors for Wavetronix SmartSensor Advance Extended Range or a. SmartSensor Matrix Presence Detector. b. 6 conductor cable for SmartSensor Advance Extended Range or SmartSensor Matrix Presence Detector. c. Includes installed connectors for SmartSensor Advance Extended Range or SmartSensor Matrix Presence Detector. 168) Ordering Number Logic: CCTO 1752a 100 feet, 6 conductor cable with connector or approved equivalent 169) Ordering Number Logic: CCTO 1752b 150 feet, 6 conductor cable with connector or approved equivalent 170) Ordering Number Logic: CCTO 1752c 200 feet, 6 conductor cable with connector or approved equivalent 171) Ordering Number Logic: CCTO 1752d 250 feet, 6 conductor cable with connector or approved equivalent 172) Ordering Number Logic: CCTO 1752e 300 feet, 6 conductor cable with connector or approved equivalent 173) Ordering Number Logic: CCTO 1752f 350 feet, 6 conductor cable with connector or approved equivalent 174) Ordering Number Logic: CCTO 1752g 400 feet, 6 conductor cable with connector or approved equivalent 175) Ordering Number Logic: CCTO 1752h 450 feet, 6 conductor cable with connector or approved equivalent 176) Ordering Number Logic: CCTO 1752i 500 feet, 6 conductor cable with connector or approved equivalent APL Number: 660-026-002 CCTO 1756 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix Sensor Cable Junction Box b. Technical specifications: 1. Physical: a. Dimensions: 6 in. x 3.6 in. x 3.1 in. (15 cm x 9 cm 8 cm) b. Cable grip cable diameter: 0.2 in.–0.5 in. (5 mm–12.7 mm) c. Designed to meet IP 66 & NEMA 250 type 1, 3R, 4X, 6P and 12 ratings d. Material: fiberglass e. 316 stainless steel backplate 2. Connector Block: a. 9 terminal blocks b. Connections: insulation displacement c. Nominal current IN: 17.5 A d. Nominal voltage UN: 500 V e. Maximum load current: 17.5 A f. Wire: 24–16 AWG 16.A.21.p Packet Pg. 999 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 25 19-7607 Traffic Operations Signal Components & Hardware 177) Ordering Number Logic: Wavetronix Sensor Cable Junction Box, Part Number: SS-710 or approved equivalent APL Number: 660-026-002 CCTO 1780 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Microwave Vehicle Count Stations Wavetronix SmartSensor HD, 24 Ghz, Dual Radar, Model: 101-0415 b. Detects up to 22 lanes of traffic c. Detection Range 6 to 250 ft. d. Detects vehicle direction, volume, speed, and classification. e. Environmental NEMA 250 compliant 178) Ordering Number Logic: Wavetronix LLC, SmartSensor HD Basic Assembly, 24 Ghz Dual Radar Model 101-0415 or approved equivalent. APL Number: 660-020-004 CCTO 1781 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Microwave Vehicle Count Stations Wavetronix SmartSensor HD Retrofit, 24 Ghz, Dual Radar Model: 101-0416 b. Detects up to 22 lanes of traffic c. Detection Range 6 to 250 ft. d. Detects vehicle direction, volume, speed, and classification. e. Environmental NEMA 250 compliant 179) Ordering Number Logic: Wavetronix LLC, SmartSensor HD Basic Assembly, 24 Ghz Dual Radar Model 101-0416 or approved equivalent. APL Number: 660-020-004 CCTO 1784 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix Click! 301 Serial to Ethernet Converter: b. Converts half-duplex serial to Ethernet and vice-versa c. Multiple communication ports, including RS-232,RS-485 and Ethernet d. DIN Rail Mounted 180) Ordering Number Logic: Wavetronix LLC, Model Click! 301 or approved equivalent. APL Number: 660-020-004 CCTO 1786 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Wavetronix Click! 201 AC to DC Power Converter: b. Converts 100-240 VAC power to 24 VDC power c. Potentiometer allows for adjustable DC voltage output d. DIN Rail Mounted 181) Ordering Number Logic: Wavetronix LLC, Model Click! 201 or approved equivalent. APL Number: 660-020-004 CCTO 1754 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. 6 conductor cable for Wavetronix SmartSensor Advance Extended Range or SmartSensor Matrix Presence Detector. b. The cable shall be the Orion Wire Combo-2204-2002-PVCGY or approved equivalent cable that conforms to the following specifications: 1. The RS-485 conductors shall be 2 twisted pairs. 2. The RS-485 conductors shall have nominal capacitance conductor to conductor of less than 40 pF/ft at 1 kHz. 3. The RS-485 conductors shall have nominal conductor DC resistance of less than 16.7 ohms/1000 ft. at 20°C. 4. The power conductors shall be a twisted pair. 5. The power conductors shall have nominal conductor DC resistance of less than 11 ohms/1000 ft. at 20°C. 6. The entire cable shall be shielded with an aluminum/polyester shield with a drain wire. 7. The cable jacket shall be made of gray PVC that is 0.053 in. (1.3 mm) thick. 8. The cable shall have a diameter of 0.41 in. (1.04 cm). 9. The power wires in the cable shall be 20 AWG; the communications wires shall be 22 AWG. 10. The cable shall be RoHS compliant. 16.A.21.p Packet Pg. 1000 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 26 19-7607 Traffic Operations Signal Components & Hardware 11. The cable shall have a UL/cUL type CMG safety approval. 12. The cable shall be cable of operating at temperatures up to 221°F (105°C) while dry and 167°F (75°C) while wet. 13. The cable shall have an FT4 flammability rating. 14. The cable shall be UV resistant, as per the UL 720 Hour Sunlight Resistance Test. 15. The cable shall support 600 Volts per AWM style 2587. 182) Ordering Number Logic: 1000 feet, 6 conductor cable, Part Number: SS-705-001 or approved equivalent APL Number: 660-026-002 CCTO 1758 Battery, Traffic Signal per the following and per State of Florida Approved Products List: a. Voltage: 12 Volt DC b. Type: Sealed gelled electrolyte, Maintenance Free c. Meets NON-SPILLABLE requirements by DOT (Department of Transportation)), d. Includes handle e. 3/8'' x 16 stainless steel stud posts 183) Ordering Number Logic: East Penn Manufacturing Co., Deka Dominator, Group 31, Part Number: 8G31 or approved equivalent Detection (Wireless Vehicle Detection System) CCTO 1770 Vehicle Detection Systems per the following and per State of Florida Approved Products List: a. Sensys Networks, Inc. Wireless Detection system b. Compatible with the Collier County Sensys Networks Communications System. 184) Ordering Number Logic: CCTO 1770a Sensys Networks, Inc., Mag 2 Flush Mounted Vehicle Sensor-System, Part Number: VSN-240-F, or approved equivalent APL Number: 660-024-002 185) Ordering Number Logic: CCTO 1770b Sensys Networks, Inc., Serial Port Protocol (Digital Radio), Part Number: APCC-SPP or approved equivalent APL Number: 660-024-002 186) Ordering Number Logic: CCTO 1770c Sensys Networks, Inc., Extension Card, Part Number: EX240 or approved equivalent APL Number: 660-024-002 187) Ordering Number Logic: CCTO 1770d Sensys Networks, Inc., Part Number: Flex Long Life Repeater or approved equivalent APL Number: 660-024-002 188) Ordering Number Logic: CCTO 1770e Sensys Networks, Inc., Battery Operated Repeater-Long Life, Part Number: RP240-BH-LL or approved equivalent APL Number: 660-024-002 189) Ordering Number Logic: CCTO 1770f Sensys Networks, Inc., Mounting Kit for AP's and Repeaters, Part Number: KIT MTG or approved equivalent APL Number: 660-024-002 190) Ordering Number Logic: CCTO 1770g Sensys Networks, Inc., Epoxy Tube, Part Number: Fabrick M-pp-450, MSM-750 VSN-240CS or approved equivalent APL Number: 660-024-002 191) Ordering Number Logic: CCTO 1770h Sensys Networks, Inc., Part Number: VSN-240-CS or approved equivalent APL Number: 660-024-002 192) Ordering Number Logic: CCTO 1770i Sensys Networks, Inc., Part Number: RAM 9" Extension bars-RaM-201-D or approved equivalent APL Number: 660-024-002 193) Ordering Number Logic: CCTO 1770j Sensys Networks, Inc., Controller Card with Enhanced Ethernet, Part Number: APCC-M-E or approved equivalent APL Number: 660-024-002 194) Ordering Number Logic: CCTO 1770k Sensys Networks, Inc., Accessory, Isolator, Part Number: APCC-ACC-1 or approved equivalent APL Number: 660-024-002 16.A.21.p Packet Pg. 1001 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 27 19-7607 Traffic Operations Signal Components & Hardware 195) Ordering Number Logic: CCTO 1770l Sensys Networks, Inc., standard external antenna, Part Number: FLEX-ANT-1 or approved equivalent APL Number: 660-024-002 Traffic Controller CCTO 2010 Controller, Traffic NEMA TS2, Type 2 per the following and per State of Florida Approved Products List: a. Intelight X3 NEMA TS2, Type 2 b. NEMA MSA, MSB, MSC, and MSD Connectors c. Meet current ATC 5201 and 5401, NEMA TS-1 and TS-2, and NTCIP standards. d. Compliant with current ATC 5.2b standards e. Number 0f Phases: 40 f. Compatible with the existing Collier County Intelight Maxview Communications System. 196) Ordering Number Logic: Intelight X3 or approved equivalent APL Number: 671-017-013 CCTO 2011 Controller, Traffic NEMA TS2, Type 2 per the following and per State of Florida Approved Products List: a. Intelight X3 NEMA TS2, Type 2 with MaxAdapt. b. MaxAdapt local controller software. c. NEMA MSA, MSB, MSC, and MSD Connectors d. Meet current ATC 5201 and 5401, NEMA TS-1 and TS-2, and NTCIP standards. e. Compliant with current ATC 5.2b standards f. Number 0f Phases: 40 g. Compatible with the existing Collier County Intelight Maxview Communications System. 197) Ordering Number Logic: Intelight X3 with MaxAdapt or approved equivalent APL Number: 671-017-013 Controller Cabinet Assembly CCTO 2102 Cabinet, Traffic Signal Controller Assembly per the following and per State of Florida Approved Products List: a. NEMA Standard TS2 Type 1 b. Collier County TS2-TYPE 1 Specification. c. Cabinet assembly shall be Type 6 d. Cabinet Assembly shall include front and rear access doors. e. 10 Circuit SDLC Interface panel. f. Exclude Traffic Controller, M.M.U. & Loop Detectors. g. 2 detector racks with total 32 channels of detection capability. h. Hard wired inductive loop detector panel. i. 8 vehicle and 8 pedestrian test switches. j. Shall include NEMA TS2 Type 1 power supply with minimum 5.0 amp, 12 volt AC output k. 8 flash transfer relay sockets, includes relays. l. 3 shelves with document drawer on lower shelf. m. Plexiglas covered cabinet window for Photocell control panel with an on/off/auto test switch, Square D contactor model number: 8910DPA42V02, (L1 wired to Illuminated signage and L2 wired to Street Lighting), Square D 10 Amp circuit breaker for Illuminated Signage, and Square D 20 Amp circuit breaker for street lighting. n. Plexiglas Hinged Flip-up Cover for Technician Test Switches. o. Cabinet interior illumination shall be L.E.D. located in top portion of cabinet interior and under document door. p. Base mounted cabinet. q. Technician panel shall include stop time on/off/auto switch (off position shall be momentary) r. UPS interface panel s. Cabinet shall meet current Collier County Technical Special Provisions (See http://www.colliergov.net/Index.aspx?page=2186) 198) Ordering Number Logic: Transportation Control Systems Inc., TS2-Type 1 Collier County or approved equivalent APL Number: 676-034-003 Controller Accessories 16.A.21.p Packet Pg. 1002 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 28 19-7607 Traffic Operations Signal Components & Hardware CCTO 2105 Cabinet, Traffic Signal Controller Assembly Power Connector Adapter Cable from TS2, Type 1 to TS2, Type 2 Traffic Controller. 199) Ordering Number Logic: Temple, Inc Part Number: ABW12027P001 or approved Equivalent APL Number: 676-034-001 CCTO 2206 Cabinet Power Supply, TS-2 per the following and per State of Florida Approved Products List: a. Input: 89-135 VAC b. +12 VDC @ 5.0 Amps c. +24 VDC @ 3.0 Amps d. 12 VAC @ 0.25 Amps 200) Ordering Number Logic: Eberle Design Inc., Part No. EDI PS-250 or approved equivalent APL Number: 678-017-003 CCTO 2222 Malfunction Management Unit (MMU2) per the following and per State of Florida Approved Products List: a. Type: TS2 b. Compatible with TS1 c. Number of Channels: 16 Channel d. Enhanced 4-section signal head compatibility e. Communications: Ethernet Port. 201) Ordering Number Logic: Eberle Design Inc., MMU2-16LEip or approved equivalent APL Number: 678-016-005 CCTO 2223 SmartMonitor Program Card, Malfunction Management Unit (MMU2) per the following and per State of Florida Approved Products List: a. Type: TS2 b. Number of Program Channels: 16 c. On-board non-volatile memory device d. Compatible with MMU2-16LE(ip)s 202) Ordering Number Logic: Eberle Design Inc., MMU2-16LE(ip) SmartMonitor Program Card or approved equivalent APL Number: 678-016-005 CCTO 2224 NEMA Load Switch per the following and per State of Florida Approved Products List: a. Solid State b. Three (3) Independent switching circuits c. Rated at 10A per circuit d. Cinch-Jones socket S-2412SB, or equivalent. 203) Ordering Number Logic: Power Distribution & Control, Inc., Part No. SSS-86-3 or approved equivalent APL Number: 678-004-009 CCTO 2225 NEMA Load Switch per the following and per State of Florida Approved Products List: a. Solid State b. Three (3) Independent switching circuits c. Rated at 10A per circuit d. Input and Output LED Indicators e. Cinch-Jones socket S-2412SB, or equivalent. 204) Ordering Number Logic: Power Distribution & Control, Inc., Part No. SSS-86I/O or approved equivalent APL Number: 678-004-011 CCTO 2226 NEMA Flasher per the following and per State of Florida Approved Products List: 16.A.21.p Packet Pg. 1003 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 29 19-7607 Traffic Operations Signal Components & Hardware a. Type 3 b. Rated at 20 A per circuit. 205) Ordering Number Logic: Power Distribution & Control, Inc., Part No. SSF-86-3 or approved equivalent APL Number: 678-007-007 CCTO 2228 Bus Interface Unit (BIU) per the following and per State of Florida Approved Products List: a. Meet or exceed all requirements of NEMA Standard TS2 for BIU Configuration. 206) Ordering Number Logic: Eberle Design Inc., Model: BIU-700 or approved equivalent APL Number: 678-018-003 CCTO 2110 4 11/16 inch Square Axial Fan per the following: a. Fan Voltage: 115 VAC b. Electrical Connections: Terminals. c. Bearings: Ball d. Rating: Minimum 100 cubic feet per minute 207) Ordering Number Logic: Dayton Part Number 2RTK6 or approved equivalent CCTO 2112 Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: a. Peak Surge Current: 10 kA (8 x 20 μs) b. Voltage Clamp: 30 volts 208) Ordering Number Logic: CCTO 2112 Asco Power Technologies, Surge Protector, Model: 175D030S10KLPCN0 (Edco PC642C-030) or approved equivalent APL Number: 676-004-010 209) Ordering Number Logic: CCTO 2112a Asco Power Technologies, Base, Model: PCB1B (Edco PCB1B-WKEY) or approved equivalent APL Number: 676-004-010 CCTO 2113a 10 Circuit SDLC Hub per the following and per State of Florida Approved Products List: a. Compatible with NEMA TS2-Type 1 controller Assembly b. Number of SDLC communication ports: 10 210) Ordering Number Logic: Transportation Control Systems Inc., TS2 Traffic Signal Cabinet, 10 circuit, SDLC Hub or approved equivalent APL Number: 676-034-003 CCTO 2302 Flash Transfer Relay per the following and per State of Florida Approved Products List: a. Meet NEMA Standard TS 2-2003 b. Pole Configuration: DPDT c. Coil Input Voltage: 110/120 VAC 50/60 Hz d. Contact Load Rating: 20 Amps at 120 VAC 211) Ordering Number Logic: Deltrol Controls, Model: 295 or approved equivalent APL Number: 678-005-008 CCTO 2119 Low Voltage Surge Protector, Isolated Pedestrian Circuit Protector per the following and per State of Florida Approved Products List: a. Peak Surge Current: 10 kA (8 x 20 μs) b. Voltage Clamp: 15 volts 212) Ordering Number Logic: CCTO 2119a Asco Power Technologies, Surge Protector, Model: 175D015S10KLPCN0 (Edco PC642C-015) or approved equivalent APL Number: 676-004-010 213) Ordering Number Logic: CCTO 2119b Asco Power Technologies, Base, Model: PCB1B (Edco PCB1B-WKEY) or approved equivalent 16.A.21.p Packet Pg. 1004 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 30 19-7607 Traffic Operations Signal Components & Hardware APL Number: 676-004-010 CCTO 2115 Transient Protection Device, Traffic Cabinet Coax Surge per the following and per State of Florida Approved Products List: a. Maximum Operating Voltage…….……5 VDC b. Operating Current………………………0.15 Amp c. Operating Frequency…………………..0-20 MHz d. Peek Current...………………………....20 kA e. Clamp Voltage ………………..…….….6 VDC 214) Ordering Number Logic: Asco Power Technologies, Model: 160D006S20KXCXN0 (Edco CX06-M) or approved equivalent APL Number: 620-004-003 CCTO 2116 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: a. Operating Voltage……………………120 VAC b. Operating Current……………………10 Amp c. Operating Frequency………………..47-63 Hz d. Clamp Voltage ……………………….395 VAC 215) Ordering Number Logic: Asco Power Technologies, Model: 254 (Edco ACP-340) or approved equivalent APL Number: 676-004-023 CCTO 2117 Transient Protection Device, Traffic Cabinet Loop Surge per the following and per State of Florida Approved Products List: a. Configuration: 3 Spaded Terminal Block b. Terminal Spacing: 9/16” c. Maximum Operating Voltage……….…………75 VDC d. Clamping Voltage………………………………130 VDC e. Peak Surge Current……………………………250 Amp 216) Ordering Number Logic: Asco Power Technologies, Model: 140D130S250ST9N0 (Edco SRA6LCA916) or approved equivalent APL Number: 676-004-021 CCTO 2120 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: a. Operating Voltage………………………………120 VAC b. Operating Current………………………………10 Amp c. Operating Frequency…………………………..47-63 Hz d. Clamp Voltage ………………………………….395 VAC 217) Ordering Number Logic: Asco Power Technologies, Model: 251120NF010AN6N0 (Edco SHP300-10) or approved equivalent APL Number: 676-004-009 CCTO 2121 Transient Protection Device, Traffic Cabinet AC Surge per the following and per State of Florida Approved Products List: a. Operating Voltage……………………120 VAC b. Operating Frequency………………..47-63 Hz c. Clamp Voltage ……………………….395 VAC 218) Ordering Number Logic: Asco Power Technologies, Model: 233120NS20KAN2N0 (Edco SPA-100T) or approved equivalent APL Number: 676-004-006 CCTO 2118 Filter, Traffic Cabinet AC Power Line per the following and per State of Florida Approved Products List: a. 120VAC, 60A, 50/60Hz b. UL 1283 Compliant 219) Ordering Number Logic: Asco Power Technologies, Model: 250120NF060AN3N0 (Edco INXT120NL000-1) or approved equivalent CCTO 2202 NEMA TS2 Type-1 Load Bay circuit L-board per the following and per State of Florida Approved Products List: 16.A.21.p Packet Pg. 1005 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 31 19-7607 Traffic Operations Signal Components & Hardware a. Manufacturer: Eagle 220) Ordering Number Logic: Mobotrex, Part Number: ACP11957P001 or approved equivalent CCTO 2208 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: a. Housing and Circuitry for one (1) BIU and 8 Two Channel Detector Cards b. 37 Pin Connector attached to the printed circuit board for designated inputs/outputs c. Dimensions: 14.6”W x 5.4”H x 7.5”D 221) Ordering Number Logic: Mobotrex, Part Number: CDR100 or approved equivalent APL Number: 676-028-001 CCTO 2210 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: a. Housing and Circuitry for one (1) BIU and 4 Two Channel Detector Cards. b. 37 Pin Connector attached to the printed circuit board for designated inputs/outputs c. Dimensions: 9.8”W x 5.9”H x 7.1”D 222) Ordering Number Logic: Mobotrex, Part Number: CDR101 or approved equivalent APL Number: 676-028-001 CCTO 2212 Rack TS2, Cabinet Detector per the following and per State of Florida Approved Products List: a. Housing and Circuitry for one (1) BIU, 8 Two Channel Detector Cards, and one (1) GTT Opticom Phase Selector Card. b. 37 Pin Connector attached to the printed circuit board for designated inputs/outputs c. Dimensions: 17.0”W x 5.9”H x 7.1”D 223) Ordering Number Logic: Mobotrex, Part Number: AAD12047P001 or approved equivalent APL Number: 676-028-001 CCTO 2111 Inductive Loop Panel, TS2, Cabinet Detector per the following and per State of Florida Approved Products List: a. PCB for 16 channels (1-16) of inductive loop detection. b. PCB for 4 channels of GTT Infrared Opticom Detection. c. 37 Pin Connector (J1) attached to the printed circuit board for detector rack TS2 designated inputs/outputs d. 20 Pin Connector (J2) attached to the printed circuit board for GTT Infrared Opticom TS2 designated inputs/outputs. e. 6 Pin Connector (J3) attached to the printed circuit board for power TS2 designated inputs/outputs. 224) Ordering Number Logic: Mobotrex, Part Number: ACP14829P002 or approved equivalent CCTO 2111a Inductive Loop Panel, TS2, Cabinet Detector per the following and per State of Florida Approved Products List: a. PCB for 16 channels (17-32) of inductive loop detection. b. 37 Pin Connector (J1) attached to the printed circuit board for detector rack TS2 designated inputs/outputs c. 6 Pin Connector (J3) attached to the printed circuit board for power TS2 designated inputs/outputs. 225) Ordering Number Logic: Mobotrex, Part Number: ACP14829P001 or approved equivalent CCTO 2201 NEMA TS2 Type-1 Load Bay circuit board per the following and per State of Florida Approved Products List: a. Manufacturer: Transportation Control Systems Inc. b. Description: 1. Printed Circuit Board (PCB) for Traffic Signal Cabinet Loadbay BIU 1. 2. Printed Circuit Board (PCB) for Traffic Signal Cabinet Loadbay BIU 2. 226) Ordering Number Logic: CCTO 2201a Transportation Control Systems Inc., PCB for Loadbay BIU 1, or approved equivalent APL Number: 676-034-003 227) Ordering Number Logic: CCTO 2201b Transportation Control Systems Inc., PCB for Loadbay BIU 2, or approved equivalent APL Number: 676-034-003 16.A.21.p Packet Pg. 1006 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 32 19-7607 Traffic Operations Signal Components & Hardware CCTO 2200 Preemption Systems, Preemption/Priority System per the following and per State of Florida Approved Products List: a. Glance AI-500-085 Series Field Monitoring System. b. Compatible with Intelight Maxview ATMS System. c. Compatible with Intelight X3 Traffic Controller d. Compatible with Glance Platform e. Controller passthrough communications f. Remotely Switchable outlets g. May Include 5 year cellular communications plan. h. Includes the following: 1. Ethernet 2. Cellular Modem 3. GPS 4. 900 MHz Radio 228) Ordering Number Logic: CCTO 2200a Temple Inc., Applied Information Inc., Glance Field Monitoring System with 5 year Cellular Plan, Part Number: AI-500-085 Series or approved equivalent APL Number: 663-001-011 229) Ordering Number Logic: CCTO 2200b Temple Inc., Applied Information Inc., Glance Field Monitoring System with No 5 year Cellular Plan, Part Number: AI-500-085 Series or approved equivalent APL Number: 663-001-011 System Control Equipment CCTO 2360 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync Fusion NEMA Processor b. Shelf Mounting c. Includes Latest Operating Software Version d. Internal Power Cable e. Includes Communication Cable to Connect to SDLC Interface & Intercept Modules 230) Ordering Number Logic: Rhythm Engineering, InSync Fusion NEMA Style Processor, Model 800-00017 or approved equivalent APL Number: 680-002-001 CCTO 2362 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync Fusion Detection Camera b. Samsung SNZ-5200 digital IP camera with lens c. Moog Enclosure d. Capable of Auto-Focus and Remote Zooming e. Internal Power Ethernet Based, IP addressable f. Password Protected g. Connects via Cat5e and power ed by 14-3 AWG 231) Ordering Number Logic: Rhythm Engineering, InSync Samsung SNZ-5200 with Moog Enclosure Detection Camera, Model 1520098645 00017 or approved equivalent APL Number: 680-002-001 CCTO 2364 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync Equipment Panel b. Hardened 120 VAC to 24 VDC 600 watt power supply c. 100 Mbps unmanaged Ethernet switch d. Store-and-forward switching architecture e. 8 Ethernet networking ports f. DC+/DC- terminal blocks provide power to cameras g. Earth ground bar h. Lightning arrestors provide protection i. 4-amp fuse block protects power to the cameras 232) Ordering Number Logic: 16.A.21.p Packet Pg. 1007 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 33 19-7607 Traffic Operations Signal Components & Hardware Rhythm Engineering, InSync Equipment Panel or approved equivalent APL Number: 680-002-001 CCTO 2366 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync SDLC Interface Module b. Supports standard NEMA TS2 SDLC and ITS connections c. Provides a switch for manually bypassing the intercept mode d. Contains an Ethernet port for 10/100 network connectivity e. Contains an RS-232 port and associated RJ12 connector for local serial access f. Compatible with the NEMA TS2-Type 1 traffic controller 233) Ordering Number Logic: Rhythm Engineering, InSync SDLC Interface Module, Model 1116VL00144 or approved equivalent APL Number: 680-002-001 CCTO 2368 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync Intercept Module b. Provides for eight field inputs and eight field outputs c. Can be configured to operate using serial communication or low voltage signal communication d. Provides a way to listen to and produce signals that are 12 VAC or 24 VDC referenced e. Contains an RS-232 port and associated RJ12 connector for local serial access 234) Ordering Number Logic: Rhythm Engineering, InSync Intercept Module or approved equivalent APL Number: 680-002-001 CCTO 2370 Adaptive Signal Control System, per the following and per State of Florida Approved Products List: a. InSync Digital Loggers, Inc. DIN Relay: b. 10/100 autosensing plug-and-play Ethernet connection with static IP allows connection anywhere on your LAN or W AN c. Password protected d. Movable HTTP port for security 235) Ordering Number Logic: Rhythm Engineering, InSync, Digital Loggers, Inc. DIN Relay III, Model LNX-800A-T or approved equivalent APL Number: 680-002-001 CCTO 2372 Adaptive Signal Control System, Adaptive Traffic Control System, per the following and per State of Florida Approved Products List: a. OVP RJ45 Surge Protector: 236) Ordering Number Logic: OVP network power supply combined lightning protection device surveillance cameras power surge RJ45 E100/4-C, Model OVP-RJ45-E100/4-C or approved equivalent APL Number: 680-002-001 CCTO 2374 Camera Ethernet Extender components per the following and per State of Florida Approved Products List: a. Non-POE (power over ethernet) network extender for CAT 5e or Cat6 b. Ethernet interface: RJ45 c. Outdoor ethernet extender 237) Ordering Number Logic: Veracity USA, Inc., Outreach Lite XT, Part Number: VOR-ORL-XT or approved equivalent CCTO 2376 Camera Ethernet Extender components per the following and per State of Florida Approved Products List: a. POE (Power over Ethernet) Network injector for CAT 5e or Cat6 b. Ethernet Interface: RJ45 c. POE injector d. Power supply included 238) Ordering Number Logic: Veracity USA, Inc., Outsource, Part Number: VOR-OSP or approved equivalent 16.A.21.p Packet Pg. 1008 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 34 19-7607 Traffic Operations Signal Components & Hardware Preemption System CCTO 1706 Preemption Systems, Multimode Phase Selector per the following and per State of Florida Approved Products List: a. Four dual-priority and probe frequency channels. b. IR only operation, GPS only operation, or simultaneous IR and GPS operation. c. NEMA TS-2 compliance d. User-adjustable range setting up to 2,500 feet of operation e. 10/100Mb Ethernet communication on the front panel 239) Ordering Number Logic: Global Traffic Technologies Opticom Model 764 GPS& IR Phase Selector or approved equivalent APL Number: 663-001-006 CCTO 1708 Preemption Systems, Infrared Detector per the following and per State of Florida Approved Products List: a. High-impact polycarbonate enclosure b. Span wire or mast arm installation. c. Adjustable turret configuration to accommodate skewed approaches. 240) Ordering Number Logic: CCTO 1708a Global Traffic Technologies Opticom Model 711 Single Channel, Infrared Detector or approved equivalent APL Number: 663-001-006 241) Ordering Number Logic: CCTO 1708b Global Traffic Technologies Opticom Model 721 Single Channel, Dual Detection, Infrared Detector or approved equivalent APL Number: 663-001-006 242) Ordering Number Logic: CCTO 1708c Global Traffic Technologies Opticom Model 722 Two Direction, Two Output Detection, Infrared Detector or approved equivalent APL Number: 663-001-006 CCTO 1710 Preemption Systems, Opticom Model 138 Detector Cable per the following and per State of Florida Approved Products List: a. Type: Three color-coded conductors, a conductive shield and drain, and a black PVC jacket. b. Rating: 600 volt rating c. Wire Type: Three-conductor AWG #20 (7x28) stranded, individually tinned copper: yellow, blue and orange. d. Shield: Aluminized polyester shield with 20% overlap e. Wire Drain AWG #20 (7x28) stranded, individually tinned copper f. Length: 1000 ft. Spool. 243) Ordering Number Logic: Global Traffic Technologies Opticom Model 138 Detector Cable or approved equivalent APL Number: 663-001-006 CCTO 1711 Cast Device Box per the following: a. Number of Gangs: 1 b. Number of Inlets: 4 c. Inlet size: 3/4 inch NPS d. Material: Malleable Iron e. Color: Gray 244) Ordering Number Logic: CCTO 1711a Cast Device Box, Appleton (O-Z/Gedney) Catalog Number: FSX-1-75 or approved Equivalent 245) Ordering Number Logic: CCTO 1711b Cast Box Cover with Gasket, Appleton (O-Z/Gedney) Catalog Number: FSK-1B or approved Equivalent CCTO 1712 Cast Device Box, Cover, and Gasket per the following: a. Number of Gangs: 1 b. Number of Inlets: 4 c. Inlet size: 3/4 inch NPS d. Material: Cast Aluminum e. Color: Gray 246) Ordering Number Logic: 16.A.21.p Packet Pg. 1009 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 35 19-7607 Traffic Operations Signal Components & Hardware CCTO 1712a Ordering Number Logic: Cast Device Box, Hubbell Inc., Killark Electric, Catalog Number: FSX-2SU6 or approved Equivalent 247) Ordering Number Logic: CCTO 1712b Ordering Number Logic: Cast Box Cover with Gasket, Hubbell Inc., Killark Electric, Catalog Number: FSBC or approved Equivalent CCTO 1714 Hooded Lamp holder per the following: a. Material: One-piece lamp holder and hood of heavy-duty die-cast aluminum b. Color: Gray c. Bulb Type: PAR-38 d. Wattage: 75 to 150 Watt e. Mount: 1/2” NPT threaded arm with locknut f. Locking screw on swivel arm and serrated teeth on swivel. g. U.L. Listed 248) Ordering Number Logic: Mulberry Metal Products Inc. Catalog Number: 30060 or approved Equivalent CCTO 1716 PAR 38 LED Flood lamp per the following: a. Type: Non-dimmable LED b. Incandescent Wattage Comparison: 90 c. Voltage: 120 VAC d. Beam Angle: 40 degrees 249) Ordering Number Logic: Satco, Part No. S9457 or approved equivalent CCTO 1718 Mini-Bracket, 3/4”-14 NPT Stainless Cable Mount, Aluminum per the following and per State of Florida Approved Products List: a. Material: Aluminum b. Fasteners: Stainless Steel c. Cable Length: 45 inches to 84 inches d. Paint: None 250) Ordering Number Logic: CCTO 1718a Pelco Products Inc., Part Number: SP-1113-FL-45-PNC or approved equivalent APL Number: 659-038-001 251) Ordering Number Logic: CCTO 1718b Pelco Products Inc., Part Number: SP-1113-FL-62-PNC or approved equivalent APL Number: 659-038-001 252) Ordering Number Logic: CCTO 1718c Pelco Products Inc., Part Number: SP-1113-FL-84-PNC or approved equivalent APL Number: 659-038-001 CCTO 2923 Disconnect Hub Assembly per the following: a. Material: Cast Aluminum with Stainless Steel Hardware. b. Color: Flat Black c. Type: 1-1/2” NPS 253) Ordering Number Logic: Pelco Products Inc., Part Number: SE-0378-P34 or approved equivalent CCTO 2927 Reducer Bushing, 1-1/2” NPT x 3/4” NPT, Galvanized Iron per the following: a. Material: Galvanized Iron. b. Reducer 1-1/2” NPT x 3/4” NPT 254) Ordering Number Logic: Pelco Products Inc., Part Number: SE-0471-GLV or approved equivalent CCTO 1709 Preemption Confirmation Light Relay Interface Panel per the Collier County Signalization Technical Special Provisions, TSP-30, the following: a. Number of Circuits: 4 16.A.21.p Packet Pg. 1010 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 36 19-7607 Traffic Operations Signal Components & Hardware b. Relay Type: Omron DPDT, Model Number: LY2-DC24 or approved equivalent. c. Relay Coil input Diode 1N4004 255) Ordering Number Logic: Transportation Control Systems, Preemption Confirmation Light Relay Interface Panel or approved equivalent Sign Beacon CCTO 1514 School Zone Flasher, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: Solar/Battery c. Battery System: 12 VDC, 100 Ahr d. Solar System: 80 W high-efficiency photovoltaic solar panel. e. Solar Engine Mounting: Top of Pole, 4.0” - 4.5” Diameter Round Pole Mount f. Cabinet Finish: Natural Aluminum g. Number of Beacons: Single h. Beacon Mounting: Single i. Type of Beacon: Dialight, 12 VDC, 12 inch, Yellow LED. j. Signal head Material: Aluminum k. Signal Head Finish: Black l. Visor Type: Tunnel m. Integrated with the following 3rd-party Time Clock: 1. Temple FCU 500-071 (FL only) 2. RTC AP21, AP22, CPR2102, and M2M modem n. Includes Time Clock Kit, No Clock o. Wireless range: 1000 ft (305 m) 256) Ordering Number Logic: Carmanah Technologies Corp., Model: R829G with single beacon or approved equivalent APL Number: 700-026-014 CCTO 1516 School Zone Flasher, Solar Powered, Dual Beacon per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: Solar/Battery c. Battery System: 12 VDC, 100 Ahr d. Solar System: 80 W high-efficiency photovoltaic solar panel. e. Solar Engine Mounting: Top of Pole, 4.0” - 4.5” Diameter Round Pole Mount f. Cabinet Finish: Natural Aluminum g. Number of Beacons: Dual h. Beacon Mounting: Dual - Vertical i. Type of Beacon: Dialight, 12 VDC, 12 inch, Yellow LED. j. Signal head Material: Aluminum k. Signal Head Finish: Black l. Visor Type: Tunnel m. Integrated with the following 3rd-party Time Clock: 1. Temple FCU 500-071 (FL only) 2. RTC AP21, AP22, CPR2102, and M2M modem n. Includes Time Clock Kit, No Clock o. Wireless range: 1000 ft (305 m) 257) Ordering Number Logic: Carmanah Technologies Corp., Model: R829G with dual vertical beacons or approved equivalent APL Number: 700-026-014 CCTO 1514a School Zone Flasher, 120 VAC Powered, Single Beacon per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: 120 VAC c. Cabinet Finish: Natural Aluminum d. Number of Beacons: Single e. Beacon Mounting: Single f. Type of Beacon: Dialight, 120 VAC, 12 inch, Yellow LED. g. Signal head Material: Aluminum 16.A.21.p Packet Pg. 1011 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 37 19-7607 Traffic Operations Signal Components & Hardware h. Signal Head Finish: Black i. Visor Type: Tunnel j. Compatible with the following 3rd-party Time Clock: 1. Temple FCU 500-071 (FL only) k. Includes Time Clock Kit, No Clock l. Wireless range: 1000 ft (305 m) 258) Ordering Number Logic: Carmanah Technologies Corp., Model: R829G with single beacon or approved equivalent APL Number: 700-026-014 CCTO 1516a School Zone Flasher, 120 VAC Powered, Dual Beacon per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: 120 VAC c. Cabinet Finish: Natural Aluminum d. Number of Beacons: Dual e. Beacon Mounting: Dual - Vertical f. Type of Beacon: Dialight, 120 VAC, 12 inch, Yellow LED. g. Signal head Material: Aluminum h. Signal Head Finish: Black i. Visor Type: Tunnel j. Compatible with the following 3rd-party Time Clock: 1. Temple FCU 500-071 (FL only) k. Includes Time Clock Kit, No Clock l. Wireless range: 1000 ft (305 m) 259) Ordering Number Logic: Carmanah Technologies Corp., Model: R829G with dual vertical beacons or approved equivalent APL Number: 700-026-014 CCTO 1519 Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: a. Operation: 24-7 Flashing b. Power Source: Solar/Battery c. Battery System: 12 V 14 Ahr. battery system d. Solar System: 13 W high-efficiency photovoltaic solar panel. e. Solar Engine Mounting: Single – Integrated Engine and Beacon f. Beacon Mounting: 4.0” - 4.5” Diameter Round Pole Mount g. Type of Beacon: 12 in (305 mm) diameter LED modules, yellow or red h. Signal head Material: Aluminum i. Signal Head Finish: Black j. Visor Type: Tunnel 260) Ordering Number Logic: CCTO 1519a Carmanah Technologies Corp., Model: R247-E with Yellow beacon or approved equivalent APL Number: 700-026-003 261) Ordering Number Logic: CCTO 1519b Carmanah Technologies Corp., Model: R247-E with Red beacon or approved equivalent APL Number: 700-026-004 CCTO 1520 Flashing Beacon, Solar Powered, Single Beacon per the following and per State of Florida Approved Products List: a. Operation: 24-7 Flashing b. Power Source: Solar/Battery c. Battery System: 12 V 14 Ahr. battery system d. Solar System: 13 W high-efficiency photovoltaic solar panel. e. Solar Engine Mounting: Single – Integrated Engine and Beacon f. Beacon Mounting: 2.0”- 2.5” Perforated Square Pole Mount g. Type of Beacon: 12 in (305 mm) diameter LED modules, yellow or red h. Signal head Material: Aluminum i. Signal Head Finish: Black j. Visor Type: Tunnel 262) Ordering Number Logic: CCTO 1520a Carmanah Technologies Corp., Model: R247-E with Yellow beacon or approved equivalent 16.A.21.p Packet Pg. 1012 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 38 19-7607 Traffic Operations Signal Components & Hardware APL Number: 700-026-003 263) Ordering Number Logic: CCTO 1520b Carmanah Technologies Corp., Model: R247-E with Red beacon or approved equivalent APL Number: 700-026-004 CCTO 1522 Flashing Beacon, Solar Powered, Dual Beacons per the following and per State of Florida Approved Products List: a. Operation: 24-7 Flashing b. Power Source: Solar/Battery c. Battery System: 12 VDC, 100 Ahr d. Solar System: 80 W high-efficiency photovoltaic solar panel. e. Solar Engine Mounting: 4.5” Diameter Round Top of Pole Mount f. Cabinet Construction: Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) g. Cabinet Finish: Natural Aluminum h. Number of Beacons: Two i. Beacon Mounting: Dual - Vertical j. Type of Beacon: Dialight, 12 VDC, 12 inch, Yellow or Red LED’s. k. Signal head Material: Aluminum l. Signal Head Finish: Black m. Visor Type: Tunnel 264) Ordering Number Logic: CCTO 1522a Carmanah Technologies Corp., Model: R247-G with Yellow beacons or approved equivalent APL Number: 700-026-013 265) Ordering Number Logic: CCTO 1522b Carmanah Technologies Corp., Model: R247-G with Red beacons or approved equivalent APL Number: 700-026-013 CCTO 2203 RTC Cellular Programmable AP22 Time Switch System per the following and per State of Florida Approved Products List: a. Time Switch Type 2 b. Model AP22 c. Display: Two-line, 16 characters per line Liquid Crystal Display (LCD) d. Keyboard: Sixteen-key, positive action push button e. Back-up Power: Non-volatile memory f. Output: Two SPDT relays rated at 15 amps, 120VDC or 115VAC resistive load g. Power: Less than 0.25 Watt at rest, 0.6 watt with relay ON, 12VDC h. Time Base: Temperature-compensated crystal with accuracy of .35 seconds/day i. Size: 10.375"H x 4.75"W x 2"D j. Temperature Range: -30˚ to +74˚ Celsius k. Includes Two-output time switch with CPC connector and 48" wiring harness. 266) Ordering Number Logic: RTC Manufacturing, Inc., Part Number 503644 or approved equivalent APL Number: 678-009-005 267) Ordering Number Logic: CCTO 2203a RTC Manufacturing, Inc., Program transfer cable, Part Number 504558 or approved equivalent APL Number: 678-009-005 268) Ordering Number Logic: CCTO 2203b RTC Manufacturing, Inc., AC power cable with connector, Part Number 500517 or approved equivalent APL Number: 678-009-005 CCTO 2207 RTC M2M Cellular Communications Modem per the following and per State of Florida Approved Products List: a. Communicates with School Zone Flashers Using SMS Texting b. Does not include SIM card. c. Includes external antenna. 269) Ordering Number Logic: RTC Manufacturing, Inc., Part Number TSC2G or approved equivalent APL Number: 678-009-005 CCTO 2205 Cellular Programmable Temple Inc. FCU-500-071 Time Switch System per the following and per State of Florida Approved Products List: 16.A.21.p Packet Pg. 1013 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 39 19-7607 Traffic Operations Signal Components & Hardware a. Input Voltage: 16-30V DC, 120V AC. b. Connectivity: Cellular Communications, Ethernet Port (10/100Base-T) c. Optional 5 year Cellular connectivity plan d. Compatible with Glance platform e. GPS enabled for self-locating f. Includes connector and Wiring Harness g. Includes high gain antenna 270) Ordering Number Logic: CCTO 2205a Includes 5 year Cellular connectivity plan. Temple Inc., Part Number FCU-500-071 or approved equivalent APL Number: 678-008-023 271) Ordering Number Logic: CCTO 2205b No 5 year Cellular connectivity plan. Temple Inc., Part Number FCU-500-071 or approved equivalent APL Number: 678-008-023 CCTO 2106 Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: Solar/Battery c. Meets NEMA 3R requirements for cabinet enclosure. d. Constructed of 0.125” thick 5052-H32 aluminum. e. Doubled flanged door opening on all four sides. f. Slam Lock System that accepts #2 Corbin keys. g. Tamperproof 14 gauge stainless steel hinge. h. Closed-Cell Neoprene Gasket around the inside edges of the door. i. Louvered vents on the top left and bottom right sidewalls with bug screens. j. Back panel for equipment mounting. k. Mounting option for flat or round surface. l. Conforms to NEC wiring specifications. 272) Ordering Number Logic: CCTO 2106a Temple Inc., Part Number: TF4001F-FL-DC with Mounting option for flat surface or approved equivalent APL Number: 700-026-018 273) Ordering Number Logic: CCTO 2106b Temple Inc., Part Number: TF4001F-FL-DC with Mounting option for round surface or approved equivalent APL Number: 700-026-018 CCTO 2101 Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: 120 VAC c. Meets NEMA 3R requirements for cabinet enclosure. d. Constructed of 0.125” thick 5052-H32 aluminum. e. Doubled flanged door opening on all four sides. f. Slam Lock System that accepts #2 Corbin keys. g. Tamperproof 14 gauge stainless steel hinge. h. Closed-Cell Neoprene Gasket around the inside edges of the door. i. Louvered vents on the top left and bottom right sidewalls with bug screens. j. Back panel for equipment mounting. k. Mounting option for flat or round surface. l. Conforms to NEC wiring specifications. m. Equipped with FDOT APL approved Model 204 Flasher Module n. 15A main circuit breaker, transient suppression and SPST power switch provided. o. Compatible with Temple Inc. Time Switch Part Number FCU-500-71 274) Ordering Number Logic: CCTO 2101a Temple Inc., Part Number: TF4001F-FL with Mounting option for flat surface, or approved equivalent APL Number: 676-011-012 275) Ordering Number Logic: CCTO 2101b Temple Inc., Part Number: TF4001F-FL with Mounting option for round surface, or approved equivalent APL Number: 676-011-012 CCTO 2100 Type 1 Wired Flasher Cabinet Assembly per the following and per State of Florida Approved Products List: a. Meets NEMA 3R requirements for cabinet enclosure. 16.A.21.p Packet Pg. 1014 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 40 19-7607 Traffic Operations Signal Components & Hardware b. Constructed of 0.125” thick 5052-H32 aluminum. c. Doubled flanged door opening on all four sides. d. Slam Lock System that accepts #2 Corbin keys. e. Tamperproof 14 gauge stainless steel hinge. f. Closed-Cell Neoprene Gasket around the inside edges of the door. g. Heavy duty, re-sealable plastic bag on the back of the main cabinet door. h. Louvered vents on the top left and bottom right sidewalls with bug screens. i. Back panel for equipment mounting. j. Mounting options for flat or round surfaces. 276) Ordering Number Logic: CCTO 2100a Temple Inc., Part Number: TF4001F-FL with Mounting option for flat surface, or approved equivalent APL Number: 676-005-008 277) Ordering Number Logic: CCTO 2100b Temple Inc., Part Number: TF4001F-FL with Mounting option for round surface, or approved equivalent APL Number: 676-005-008 CCTO 3160 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: Solar/Battery c. All enclosures shall be a ventilated, weatherproof NEMA 3R rated. d. Sign: 30 x 42" YOUR SPEED - Fluorescent Yellow/Green e. Display Message: Speed and Slow Down. Flashes MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 15 inches. g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Solar Panel Mounting: 4.5” Diameter Round Top of Pole Mount. i. G series solar cabinet, non-EMS charge controller, no display j. Standard battery,100 Ah k. Solar Panel: Includes 80 W high-efficiency photovoltaic solar panel. l. Output harnessing, for control of 2x 12 vdc external devices, 4 conductor, incl. wiring to jbox. m. Includes one or two Dialight 12 inch yellow LED beacon (MUTCD Compliant). n. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle o. Datalogger, unlocked within SpeedCheck programming software p. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-071 278) Ordering Number Logic: CCTO 3160a Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-S-B1 or approved equivalent APL Number: 700-019-002 279) Ordering Number Logic: CCTO 3160b Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-S-B2 or approved equivalent APL Number: 700-019-002 CCTO 3162 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: 120 VAC c. All enclosures shall be a ventilated, weatherproof NEMA 3R rated. d. Sign: 30 x 42" YOUR SPEED - Fluorescent Yellow/Green e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 15 inches g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Output harnessing, for control of 2x 12 vdc external devices, 4 conductor, incl. wiring to jbox. i. Includes one or two Dialight 12 inch yellow LED beacon (MUTCD Compliant). j. Includes the following: 16.A.21.p Packet Pg. 1015 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 41 19-7607 Traffic Operations Signal Components & Hardware 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle k. Datalogger, unlocked within SpeedCheck programming software l. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-71 280) Ordering Number Logic: CCTO 3162a Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-AC-B1 or approved equivalent APL Number: 700-019-002 281) Ordering Number Logic: CCTO 3162b Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-15-SZ-AC-B2 or approved equivalent APL Number: 700-019-002 CCTO 3164 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: Solar/Battery c. All enclosures shall be a ventilated, weatherproof NEMA 3R rated. d. Sign: 36 x 48" YOUR SPEED - Fluorescent Yellow/Green e. Display Message: Speed and Slow Down. Flashes MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 18 inches. g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Solar Panel Mounting: 4.5” Diameter Round Top of Pole Mount. i. G series solar cabinet, non-EMS charge controller, no display j. Standard battery,100 Ah k. Solar Panel: Includes 80 W high-efficiency photovoltaic solar panel. l. Output harnessing, for control of 2x 12 vdc external devices, 4 conductor, incl. wiring to jbox. m. Includes one or two Dialight 12 inch yellow LED beacon (MUTCD Compliant). n. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle o. Datalogger, unlocked within SpeedCheck programming software p. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-071 282) Ordering Number Logic: CCTO 3164a Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-S-B1 or approved equivalent APL Number: 700-019-002 283) Ordering Number Logic: CCTO 3164b Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-S-B2 or approved equivalent APL Number: 700-019-002 CCTO 3166 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: School Zone b. Power Source: 120 VAC c. All enclosures shall be a ventilated, weatherproof NEMA 3R rated. d. Sign: 36 x 48" YOUR SPEED - Fluorescent Yellow/Green e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 18 inches g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Output harnessing, for control of 2x 12 vdc external devices, 4 conductor, incl. wiring to jbox. i. Includes one or two Dialight 12 inch yellow LED beacon (MUTCD Compliant). j. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 16.A.21.p Packet Pg. 1016 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 42 19-7607 Traffic Operations Signal Components & Hardware 3. Bluetooth USB dongle k. Datalogger, unlocked within SpeedCheck programming software l. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-71 284) Ordering Number Logic: CCTO 3166a Carmanah Technologies Corp., Information Display Company, One Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-AC-B1 or approved equivalent APL Number: 700-019-002 285) Ordering Number Logic: CCTO 3166b Carmanah Technologies Corp., Information Display Company, Two Dialight 12 inch yellow LED beacon, Model Number: SpeedCheck-18-SZ-AC-B2 or approved equivalent APL Number: 700-019-002 Electronic Speed Feedback Sign (ESFS) CCTO 3168 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: Non-School Zone b. Power Source: Solar/Battery c. Enclosure: Ventilated, weatherproof NEMA 3R rated. d. Sign: 30 x 42" YOUR SPEED - Yellow e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 15 inches g. Display Enclosure Mounting Brackets: Standard Banding. h. Solar Panel Mounting: 4.5” Diameter Round Top of Pole Mount. i. G series solar cabinet, non-EMS charge controller, no display j. Standard battery,100 Ah k. Solar Panel: Includes 80 W high-efficiency photovoltaic solar panel. l. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle m. Datalogger, unlocked within SpeedCheck programming software n. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-071 286) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-15-S or approved equivalent APL Number: 700-019-002 CCTO 3170 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: Non-School Zone b. Power Source: 120 VAC AC power kit external box. c. Enclosure: Ventilated, weatherproof NEMA 3R rated. d. Sign: 30 x 42" YOUR SPEED - Yellow e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 15 inches g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle i. Datalogger, unlocked within SpeedCheck programming software j. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-71 287) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-15-AC or approved equivalent APL Number: 700-019-002 CCTO 3072 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved 16.A.21.p Packet Pg. 1017 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 43 19-7607 Traffic Operations Signal Components & Hardware Products List: a. Operation: Non-School Zone b. Power Source: Solar/Battery c. Enclosure: Ventilated, weatherproof NEMA 3R rated. d. Sign: 36 x 48" YOUR SPEED - Yellow e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 18 inches g. Display Enclosure Mounting Brackets: Standard Banding. h. Solar Panel Mounting: 4.5” Diameter Round Top of Pole Mount. i. G series solar cabinet, non-EMS charge controller, no display j. Standard battery,100 Ah k. Solar Panel: Includes 80 W high-efficiency photovoltaic solar panel. l. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle m. Datalogger, unlocked within SpeedCheck programming software n. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-071 288) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-18-S or approved equivalent APL Number: 700-019-002 CCTO 3074 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Operation: Non-School Zone b. Power Source: 120 VAC AC power kit external box. c. Enclosure: Ventilated, weatherproof NEMA 3R rated. d. Sign: 36 x 48" YOUR SPEED - Yellow e. Display Message: LED yellow 88 and LED yellow MUTCD-compliant “Slow Down” message when drivers exceed user- defined speed thresholds. f. Display Message LED digits: 18 inches g. Display Enclosure Mount: Side of pole, 4 - 6" OD (std.) h. Includes the following: 1. SpeedCheck programming software 2. Traffic Analyzer software 3. Bluetooth USB dongle i. Datalogger, unlocked within SpeedCheck programming software j. Fully Integrated with Temple Inc. Time Switch Part Number FCU-500-71 289) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, Model Number: SpeedCheck-18-AC or approved equivalent APL Number: 700-019-002 CCTO 3076 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. OutputManager™ for managing operation of 12V external devices. b. Includes Wiring Harness c. Compatible with: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series. 290) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, Model Number: O-MGR or approved equivalent APL Number: 700-019-001 and 700-019-002 CCTO 3078 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Item: AC Power supply conversion kit. b. Function: Convert 120 volt AC to 12 volt DC. c. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series or Speedcheck-18 Series. 16.A.21.p Packet Pg. 1018 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 44 19-7607 Traffic Operations Signal Components & Hardware 291) Ordering Number Logic: CCTO 3078a Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series, Model Number: 85497 or approved equivalent APL Number: 700-019-001 292) Ordering Number Logic: CCTO 3078b Carmanah Technologies Corp., Information Display Company, SpeedCheck-18 Series, Model Number: 85412 or approved equivalent APL Number: 700-019-002 CCTO 3080 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Item: Replacement Controller Board. b. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series c. Includes Bluetooth wireless communications. 293) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and SpeedCheck-18 Series, Replacement Controller Board, Part Number: 85718 or approved equivalent. APL Number: 700-019-001 and 700-019-002 CCTO 3082 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Item: Replacement Radar head. b. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and Speedcheck-18 Series. 294) Ordering Number Logic: Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series and SpeedCheck-18 Series, Replacement Radar head, Part Number: H-R-AO or approved equivalent APL Number: 700-019-001 and 700-019-002 CCTO 3084 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Item: Replacement Right and Left legend Panel. b. Compatible with Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series or Speedcheck-18 Series. c. Display: yellow 88 + yellow slow down LED panels. d. Includes: 1 set of 2x PCBAs 295) Ordering Number Logic: CCTO 3084a Carmanah Technologies Corp., Information Display Company, SpeedCheck-15 Series, Model Number: Replacement Right and Left legend Panel, Part Number: 85458 or approved equivalent APL Number: 700-019-001 296) Ordering Number Logic: CCTO 3084b Carmanah Technologies Corp., Information Display Company, SpeedCheck-18 Series, Model Number: Replacement Right and Left legend Panel, Part Number 85359 or approved equivalent APL Number: 700-019-002 CCTO 3086 Electronic Display Sign (EDS) – Electronic Speed Feedback Sign (ESFS) per the following and per State of Florida Approved Products List: a. Features: 1. Bluetooth wireless programming. 2. Configuration and Traffic Data Collection software included. 3. Includes Android App available on the Google Play Store at no charge. 4. Programmable full matrix display allows the sign to display speed numbers and ‘SLOW DOWN’ message. 5. 100% MUTCD compliant. 6. Built in 30Ah battery pack and Smart AC charger for charging between deployments. 7. K-band (24.15GHz) radar, range 450+ feet. 8. 3 year limited warranty. b. LED and Radar Components: 16.A.21.p Packet Pg. 1019 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 45 19-7607 Traffic Operations Signal Components & Hardware 1. Speed Display Height: 12” high numbers. 2. Text Height: 5” high two lines ‘SLOW DOWN’ text. 3. “YOUR SPEED” Legend: 4” high highway gothic font (MUTCD compliant). 4. Sign Legibility Viewable range: 750 feet; legible range: 600 feet. c. Materials and Construction: 1. Chassis Size: 24” width x 30” height x 2-1/4” depth. 2. Total Weight: Less than 28 pounds with bracket. 3. Front Face Sheeting: 3M Diamond Grade, long life protective sheeting. 4. Sign Face Color: White. 5. Sign Mounting Construction: 1/8” thick aluminum brackets and face; standard 3% tilt bracket configuration; flat mount brackets optional. 6. Electronics Enclosure Rating: Weatherproof; NEMA 3R. d. Electrical Specifications: 1. Power Requirements: 2W stealth; 300MW standby; 6W night; 28W day. 2. Voltage Requirements: 9V-30VDC; 12VDC Nominal (Battery protection at 11.5VDC and 10.8VDC; startup at 12.3VDC). 3. Power: Indoor rated AC charging adapter included. e. Configuration and Traffic Data Collection Software 1. Power Requirements: 2W stealth; 300MW standby; 6W night; 28W day. 2. Event Logging with Time Stamp: Event data: 60 days with a circular buffer; applied voltage (VDC); internal temperature (°C); ambient light (lux); display functional status; traffic status; shock sensor events; parameter events. 3. Vehicle Data Logging Capacity: Speed Data: 90 days with circular buffer (oldest reading replaced by newest) based on 24/7 operation. 4. Programmable Display Features: Min. speed limit; speed limit; over speed; and maximum speed to display. Display type: blank (stealth mode); actual speed; speed limit; flashing digits; steady digits; strobing digits and strobing ‘SLOW DOWN’ text. Programmable integrated “SLOW DOWN” Message; external beacon control. 5. Schedules: Repeating daily: 9 events; repeating weekly: 9 events; non-repeating dated: 9 events; (27 events in one 24 hour period; 365 days per year while powered). 6. Communications: Bluetooth™ Class 1 connectivity (V2.1 +EDC) min at 30’ (FCC certified); RS232 port. f. Includes the following: 1. Driver Feedback sign, mounting bracket, Smart AC charger, SafetyCalm™ Configuration and Traffic Data Collection Software, installation and user manual. 297) Ordering Number Logic: Trafficalm Systems, Model M75-12DFB-P001 or approved equivalent APL Number: 700-019-004 Blank-Out Sign (BOS) CCTO 2440 Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Single Message, per the following and per State of Florida Approved Products List: a. Enclosure meets NEMA 3R standards. b. Enclosure color: Black c. Light Source: LED d. Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. e. Message Type: Single f. Message: Various g. Size: Various 298) Ordering Number Logic: CCTO 2440a Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 24X24, Single Message, or approved equivalent APL Number: 700-012-012 299) Ordering Number Logic: CCTO 2440b Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X30, Single Message, or approved equivalent APL Number: 700-012-012 300) Ordering Number Logic: CCTO 2440c Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X36, Single Message, or approved equivalent APL Number: 700-012-012 301) Ordering Number Logic: CCTO 2440d Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 36X36, Single Message, or approved 16.A.21.p Packet Pg. 1020 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 46 19-7607 Traffic Operations Signal Components & Hardware equivalent APL Number: 700-012-012 CCTO 2442 Electronic Display Sign (EDS) – Blank-Out Sign (BOS), Dual Message, per the following and per State of Florida Approved Products List: a. Enclosure meets NEMA 3R standards. b. Enclosure color: Black c. Light Source: LED d. Message: Shall conform to Manual on Uniform Traffic Control Devices (MUTCD) font and symbol sign standards. e. Message Type: Dual f. Message: Various g. Size: Various 302) Ordering Number Logic: CCTO 2442a Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 24X24, Dual Message, or approved equivalent APL Number: 700-012-012 303) Ordering Number Logic: CCTO 2442b Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X30, Dual Message, or approved equivalent APL Number: 700-012-012 304) Ordering Number Logic: CCTO 2442c Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 30X36, Dual Message, or approved equivalent APL Number: 700-012-012 305) Ordering Number Logic: CCTO 2442d Transportation Control Systems, Inc., Model Number: TCSLEDBO Series, 36X36, Dual Message, or approved equivalent APL Number: 700-012-012 Rectangular Rapid Flashing Beacon Assembly (RRFB) CCTO 1523 Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: a. Power Source: Solar/Battery. b. Solar Engine Construction: Weatherproof, gasketed enclosure with vents for ambient air transfer, NEMA 3R rated. c. Solar Panel: 30 W high-efficiency photovoltaic solar panel. d. Battery system: 12 V 34 Ahr. e. Solar Engine Finish: Black f. Solar Engine Mounting: 4.0” - 4.5” Diameter Round Top of Pole Mount. g. Light Bar Configuration: Single or Dual. h. Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation. i. Push button color: Black j. Wireless range: 1000 ft (305 m). k. Encrypted, wireless radio with 2.4 GHz mesh technology l. Meets or exceeds MUTCD requirements, including IA-21. m. Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating. 306) Ordering Number Logic: CCTO 1523a Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: R920 or approved equivalent APL Number: 654-001-004 307) Ordering Number Logic: CCTO 1523b Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: R920 or approved equivalent APL Number: 654-001-004 CCTO 1525 Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: a. Power Source: Solar/Battery. b. Solar Engine Construction: Weatherproof, gasketed enclosure with vents for ambient air transfer, NEMA 3R rated. c. Solar Panel: 50 W high-efficiency photovoltaic solar panel. 16.A.21.p Packet Pg. 1021 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 47 19-7607 Traffic Operations Signal Components & Hardware d. Battery system: 12 V, 75 Ahr. e. Solar Engine Finish: Black f. Solar Panel Mounting: 4.0” - 4.5” Diameter Round Top of Pole Mount. g. Light Bar Configuration: Single or Dual. h. Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation. i. Push button color: Black j. Wireless range: 1000 ft (305 m). k. Encrypted, wireless radio with 2.4 GHz mesh technology l. Meets or exceeds MUTCD requirements, including IA-21. m. Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating. 308) Ordering Number Logic: CCTO 1525a Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: SC315-G or approved equivalent APL Number: 654-001-005 309) Ordering Number Logic: CCTO 1525b Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: SC315-G or approved equivalent APL Number: 654-001-005 CCTO 1527 Midblock Crosswalk Enhancement Assemblies – Rectangular Rapid Flashing Beacon Assembly (RRFB) per the following and per State of Florida Approved Products List: a. Power Source: 120 VAC. b. Control Cabinet: Weatherproof, gasketed enclosure with vents for ambient air transfer, NEMA 3R rated. c. Light Bar Configuration: Single or Dual. d. Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation. e. Push button color: Black f. Wireless range: 1000 ft (305 m). g. Encrypted, wireless radio with 2.4 GHz mesh technology h. Meets or exceeds MUTCD requirements, including IA-21. i. Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating. 310) Ordering Number Logic: CCTO 1527a Carmanah Technologies Corp., Single Light Bar Configuration, Model Number: SC315-AC or approved equivalent APL Number: 654-001-006 311) Ordering Number Logic: CCTO 1527b Carmanah Technologies Corp., Dual Light Bar Configuration, Model Number: SC315-AC or approved equivalent APL Number: 654-001-006 Network Devices CCTO 2230 Network Devices, per the following and per State of Florida Approved Products List: RuggedCom Inc. (ITS) Managed Switch RS900G: a. 10-port Managed Ethernet Switch b. Gigabit Uplink ports c. Include Two (2) SC10: Dual 1000LX Single Mode SC 10nm 10KM SFP d. DIN Rail Mounting e. Includes Latest Operating Software Version f. Internal Power Supply g. Includes 6 foot power cable 312) Ordering Number Logic: RuggedCom Inc. a Siemens Company, Model RS900G-HI-D-2LC10 or approved equivalent. APL Number: 684-002-001 CCTO 2232 Network Devices, per the following and per State of Florida Approved Products List: Industrial 24-port rack –mounted Managed Hardened Layer 2 Ethernet switch ITS Express Inc., Model Number ITS-8024: a. 24-port Managed Ethernet Switch , (8) 100/1000 SFP ports, Plus (16) Combo 100/1000SFP/1000TX RJ45 b. Gigabit Uplink ports 16.A.21.p Packet Pg. 1022 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 48 19-7607 Traffic Operations Signal Components & Hardware c. Include Two (2) SC10: Dual 1000LX Single Mode SC 10nm 10KM SFP d. Rack Mounted (1RU) e. Includes Latest Operating Software Version f. Includes 6 foot power cable 313) Ordering Number Logic: ITS Express Inc., Model ITS Express Inc., Model Number ITS- 8024 or approved equivalent. APL Number: 684-002-007 CCTO 2234 Network Devices, per the following and per State of Florida Approved Products List: Layer 2++ Multicast Cabinet Switch ITS Express Inc., Model Number ITS-8040: a. 12-port Managed Ethernet Switch (4) 100/1000 Hybrid SFP ports, Plus (8) copper 100/1000SFP/1000TX RJ45 b. Gigabit Uplink ports c. Include Two (2) SC10: Dual 1000LX Single Mode SC 10nm 10KM SFP d. DIN Rail Mounting e. Latest Operating Software Version 314) Ordering Number Logic: ITS Express Inc., Model ITS Express Inc., Model Number ITS- 8040 or approved equivalent. APL Number: 684-002-007 CCTO 2236 Network Devices, per the following and per State of Florida Approved Products List: ITS Express Inc., Model number ITS-HPS Power Supply. a. Input 120 VAC b. Output: 24 DC c. DIN Rail Mounting d. Includes 6 foot power cable 315) Ordering Number Logic: ITS Express Inc., Model Number ITS-HPS power supply with 6 foot cable or approved equivalent. APL Number: 684-002-007 CCTO 2238 Network Devices, per the following and per State of Florida Approved Products List: ITS Express Inc., Model Number ITS-8028: a. 28-port Managed Ethernet Switch, (4) 100/1000 SFP ports, Plus (24) Combo 100/1000SFP/1000TX RJ45 b. Gigabit Uplink ports c. Include Two (2) SC10: Dual 1000LX Single Mode SC 10nm 10KM SFP d. Rack Mounted (1RU) e. Latest Operating Software Version f. Includes 6 foot power cable. 316) Ordering Number Logic: ITS Express Inc., ITS Express Inc., Model Number ITS- 8028 or approved equivalent. APL Number: 684-002-007 CCTO 2240 Network Devices, per the following and per State of Florida Approved Products List: Combination 24-port Hardened Layer 2 Ethernet Switch with Optical Bypass ITS Express Inc., Model Number ITS-8012+: a. 24-port Managed Ethernet Switch (8) 100/1000 Hybrid SFP ports, Plus (16) copper 100/1000SFP/1000TX RJ45 b. Support 100m/1G/10G optical Bypass Function of 2 port duplex or 4 port simplex fiber connection c. Gigabit Uplink ports d. Include Two (2) SC10: Dual 1000LX Single Mode SC 10nm 10KM SFP e. Latest Operating Software Version 317) Ordering Number Logic: ITS Express Inc., Model ITS-8012+ or approved equivalent. APL Number: 684-002-007 CCTO 2242 Network Devices, per the following and per State of Florida Approved Products List: Hardened Optical Bypass Switch ITS Express Inc., Model Number ITS-80BP a. Support 100m/1G/10G optical Bypass Function of 2 port duplex or 4 port simplex fiber connections b. Supports Single Mode Optical Fiber c. Bypass switching time <10ms 16.A.21.p Packet Pg. 1023 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 49 19-7607 Traffic Operations Signal Components & Hardware d. Dual Wide range Power inputs 12~48 VDC e. Relay output for power Failed warning f. Din-Rail and wall mounting enabled g. Low insertions loss 318) Ordering Number Logic: ITS Express Inc., Model Number ITS-80BP or approved equivalent. CCTO 2244 Network Devices, Uninterruptible Power Supply (UPS) 3000 VA On-line Rack/Wall/Tower UPS with 8 outlets per the following and per State of Florida Approved Products List: a. Properties: 1. Input plug type: L5-30P 2. Input voltage: 110/120 3. Output voltage: 110/120 4. Number of fully protected outlets: 7 (5-15/20R) & 1 (L5-30R) 5. Number of surge protected only outlets: None 6. Phone / modem (RJ-11) protection? Yes 7. Network (RJ -45) protection? Yes 8. No. of serial (DB-9) ports: 1 9. No. of dry contact ports: 1 10. USB port: Yes b. Technical Attributes: 1. SNMP manageable? Yes 2. Power in Watts: 2700 3. EMI/RFI filtering? Yes 4. Max. energy dissipation: 1000 (Joules) 5. Protected equipment insurance value: $200000 USD (US and Canada Only) 6. Switchover time: None c. Software: 1. Operating system shutdown software included: Yes d. Product Dimensions (in inches): 1. Length: 24.50 2. Width/Depth: 19.00 3. Height: 3.50 4. Weight: 70.50 lbs. e. Features: 1. True online, double-conversion technology 2. Compact case design, (only 2U for all models), for high-density rack installations 3. Flexible installation format: Rack/Tower or Wall (with an optional install kit) 4. Rackmount ears come attached to UPS 5. Easy-to-read LCD display 6. 0.9 output power factor 7. Highly-efficient, Economy Mode option 8. Output receptacle control with three load banks 9. Independent Battery Bypass – allows the UPS to provide voltage regulation and spike/surge protection either with dead batteries or without batteries 10. Hot-swappable battery replacement 11. Cold Start capable 12. Temperature-compensated charging 13. Automatic internal bypass 14. Simultaneous USB and RS-232 communications 15. Site-wiring fault indicator 16. Compatible with Minuteman’s SentryHD software 17. SNMP compatible (with optional card) 18. Dedicated EPO port 19. External battery pack capability for virtually unlimited runtime 20. RJ11/45 Network/Phone/Fax protection 21. A standard five-year warranty (including batteries) 22. Green UPS design (RoHS and Energy Star compliant) 23. $200,000 Platinum Protection Guarantee 319) Ordering Number Logic: Minuteman Power Technologies, Endeavor Model Number: ED3000RTXL2U or approved equivalent. 16.A.21.p Packet Pg. 1024 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 50 19-7607 Traffic Operations Signal Components & Hardware CCTO 2246 Network Devices, Uninterruptible Power Supply (UPS) Battery Replacement Module per the following and per State of Florida Approved Products List: a. Battery Type: Sealed, Non-Spillable, Maintenance-Free, Valve-Regulated, Lead Acid b. Runtime (Half Load): 12 minutes c. Runtime (Full Load): 3.5 minutes 320) Ordering Number Logic: Battery Replacement Module, Minuteman Power Technologies, Model Number BM0032 or approved equivalent. CCTO 2248 Network Devices, Uninterruptible Power Supply (UPS), Battery Replacement Module, per the following and per State of Florida Approved Products List: a. Battery Type: Sealed, Non-Spillable, Maintenance-Free, Valve-Regulated, Lead Acid b. Runtime (Half Load): 12.7 minutes c. Runtime (Full Load): 5.0 minutes 321) Ordering Number Logic: Battery Replacement Module, Minuteman Power Technologies, Model Number BM0036 or approved equivalent. CCTO 2250 Network Devices, HDRM100 L2 Industrial 4G Wireless Wifi Router, per the following: a. 3G/4G LTE data transmission. b. Active auto connect. c. Runtime (Full Load): 5.0 minutes. d. Built-in watchdog, system crashes self-recovery. e. Built-in link maintenance mechanism, data link dropped from self-recovery. f. 2*2 4G/WIFI MIMO antenna. g. Supports 3G/4G LTE,WIFI function. h. 4G LTE. Support CAT 3, CAT 4 now. i. WIFI High quality performance without congestion. j. 1 WAN/1 LAN or 2 LAN ports, One console port. k. With SIM card slot. l. Wide power supply: +5V~+48V/1A. m. Remote management platform. n. Firmware version: Linux. o. Dimension:115mm*73mm*20mm. 322) Ordering Number Logic: M2M Dynamics, Inc., Part Number: HDRM100 L2, or approved equivalent. Uninterruptible Power Supply (UPS) CCTO 2306 Power Supplies (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: a. This document outlines the minimum requirements for Uninterruptible Power Supply with Real Time Active Power Conditioner, Automatic Transfer Switch, and Generator Connection. b. The UPS system shall be on Florida Department of Transportation Approved Products List (APL). c. The Traffic/ITS UPS system with batteries shall meet or exceed the NEMA Environmental Standards without the aid of heaters and/or air conditioners. The included non-gassing battery set shall meet or exceed the requirements of Mil-Spec #MIL-B-8565J. The true Digital On-Line full double conversion Traffic/ITS UPS unit shall use programmable digital technology to create a Power Factor Corrected and fully regulated and conditioned, pure sine wave output power. All power to the cabinet and signals shall be supplied by the UPS which converts utility AC to DC and then digitally regenerates clean regulated AC to all cabinet and signal loads. The resulting continuous AC output shall be a pure clean regenerated sine wave at 60 hertz, nominal 120 volts. The UPS unit shall automatically correct the utility input power to all connected cabinet and signal equipment (power factor corrected). A fully programmable digital flash timer must be included. The UPS shall supply continuous uninterrupted no-break power to all loads at all times, regardless of utility spikes, sags, surges, brownouts or blackouts and status of battery charging system. The Traffic/ITS UPS system shall be fully software / firmware programmable. UPS shall be capable of Local and/or remote programming. A Windows software program shall be included as part of the UPS system to allow the user to easily make operational and communications changes. The UPS unit shall utilize a hot swappable design of the UPS, and or batteries that facilitate ease of maintenance. The complete UPS system including Power Interface Module and/or Manual Bypass Module with batteries shall have a minimum full two year factory warranty. UPS shall include an SNMP Ethernet card. d. Generator compartment shall be on left side of cabinet. 16.A.21.p Packet Pg. 1025 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 51 19-7607 Traffic Operations Signal Components & Hardware e. The continuous AC output shall be a minimum of 1400 watts load. f. Compatible with the Collier County Uninterruptible Power Supply Communications System. g. Warranty: 3 years. 323) Ordering Number Logic: CCTO 2306a Ordering Number Logic: Clary SP2000LX with Temple Low profile cabinet to mount on existing traffic signal cabinet or approved equivalent APL Number: 685-003-002 324) Ordering Number Logic: CCTO 2306b Ordering Number Logic: Clary SP2000LX with Temple pad mount cabinet or approved equivalent APL Number: 685-003-002 325) Ordering Number Logic: CCTO 2306c Ordering Number Logic: Clary SP2000LX or approved equivalent APL Number: 685-003-002 CCTO 2308 Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: a. Outpost 12 Volt, 41 amp hour battery b. Type: Sealed, Maintenance Free c. Construction: Absorbed Glass Mat (AGM) d. UL 924 and 1989 Compliant e. Order Quantity: 40 to 200 326) Ordering Number Logic: CCTO 2308a Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 40 327) Ordering Number Logic: CCTO 2308b Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 80 328) Ordering Number Logic: CCTO 2308c Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 120 329) Ordering Number Logic: CCTO 2308d Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 160 330) Ordering Number Logic: CCTO 2308e Clary Outpost 12 Volt Battery 41 Amp Hour Battery Part Number OPB-1241 or approved equivalent, Order Quantity 200 APL Number: 685-003-002 CCTO 2308a Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: a. Outpost 12 Volt, 51 amp hour battery b. Type: Sealed, Maintenance Free c. Construction: Absorbed Glass Mat (AGM) d. UL 924 and 1989 Compliant e. Order Quantity: 40 to 200 331) Ordering Number Logic: CCTO 2308aa Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 40 332) Ordering Number Logic: CCTO 2308ab Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 80 333) Ordering Number Logic: CCTO 2308ac Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 120 334) Ordering Number Logic: CCTO 2308ad Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 160 335) Ordering Number Logic: CCTO 2308ae Clary Outpost 12Volt Battery 51 Amp Hour Battery Part Number OPB-1251 or approved equivalent, Order Quantity 200 APL Number: 685-003-002 16.A.21.p Packet Pg. 1026 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 52 19-7607 Traffic Operations Signal Components & Hardware CCTO 2305 Batteries (UPS), Traffic Signal Cabinet per the following and per State of Florida Approved Products List: a. Alphacell 12 Volt, 100 amp hour battery b. Type: Sealed, Valve regulated lead acid, Maintenance Free c. Construction: GelCell d. Order Quantity: 40 to 200 336) Ordering Number Logic: CCTO 2305a Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 40 337) Ordering Number Logic: CCTO 2305b Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 80 338) Ordering Number Logic: CCTO 2305c Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 120 339) Ordering Number Logic: CCTO 2305d Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 160 340) Ordering Number Logic: CCTO 2305e Alpha Technologies, AlphaCell 181-230-10, Part Number 195 GXL or approved equivalent, Order Quantity 200 APL Number: 685-002-005 CCTV Camera CCTO 2350 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc VG5 Autodome Series Camera with mount with model number: VG5-ITS1080P-30X5 a. HD 1080p resolution at 30 images per second (ips) b. Intelligent Tracking automatically detects and tracks an object in motion c. 240x zoom (20x optical, 12x digital) d. Quad video streaming generates simultaneous H.264, M-JPEG, and JPEG video streams e. ONVIF conformant; provides interoperability with other conformant systems f. Embedded Intelligent Video Analytics (IVA) for reliable detection, analysis, and search g. Including Candy Cane pipe mount and interface h. Clear Bubble i. Include Power Supply 341) Ordering Number Logic: Bosch Security Systems, Inc, Model VG5-ITS1080P-30X5 or approved equivalent APL Number: 682-002-004 CCTO 2352 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Power Supply plug-in Transformer ELK-TRG2440 24 VAC, 40VA a. Primary 120VAC, 60Hz b. Secondary 24VAC, 40VA c. Auto-Reset (PTC) Overload Protection d. LED Power Indicator on Secondary e. Grounding Prong & Terminal Wire Strain Relief 342) Ordering Number Logic: ELK Products, Inc, Model ELK-TRG2440 or approved equivalent. APL Number: 682-002-004 CCTO 2353 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: a. Interface Board b. Pipe Mount 343) Ordering Number Logic: Bosch VG4-A-95423, AutoDome Pipe Mount with Interface Board or approved equivalent. APL Number: 682-002-004 CCTO 2354 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: Bosch Security Systems, Inc BOSCH VIP-X1XF-E Video External Encoder Single Channel: a. Single-channel H.264 encoder with Dual Streaming b. Record on network-attached RAID iSCSI storage devices or locally on SD cards 16.A.21.p Packet Pg. 1027 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 53 19-7607 Traffic Operations Signal Components & Hardware c. ONVIF conformant; provides interoperability with other conformant systems d. Multicast and Internet streaming e. Alarm input and relay output f. Includes Bosch 12 VDC power supply for use with VIP X1 XF E, Order number UPA-1216-50. g. Include Bosch MVS-FENC-AES BVIP AES 128 Bit Encryption site license, Order number MVS-FENC-AES 344) Ordering Number Logic: CCTO 2354a Bosch Security Systems Inc., Order number VIP-X1XF-E or approved equivalent. 345) Ordering Number Logic: CCTO 2354b Bosch 12 VDC power supply for use with VIP X1 XF E, Order number UPA-1216-50 or approved equivalent. 346) Ordering Number Logic: CCTO 2354c Bosch MVS-FENC-AES BVIP AES 128 Bit Encryption site license, Order number MVS-FENC-AES or approved equivalent. CCTO 2356 CCTV Camera (Dome & External) per the following and per State of Florida Approved Products List: CCTV Camera Mount a. Material: 1 ½ inch Schedule 40 Aluminum b. Finish: None c. Threaded at both ends d. Includes one 1 ½ inch threaded aluminum coupling. 347) Ordering Number Logic: ITS Express Inc., Part Number: Candy Cane Mount or approved equivalent CCTO 2109 CCTV Camera Ethernet Extender Cabinet per the following and per State of Florida Approved Products List: a. Ethernet extender cabinet shall include all type 1 cabinet interior components and wiring (excluding ethernet injector) as shown on the “Interior view/wiring” diagram in the Collier County Signalization Technical Special Provisions, sheet No. TSP-39. b. Cabinet: Type 1 with #2 slam lock. c. Finish: None 348) Ordering Number Logic: Temple Inc., Part Number: TF4001-EE (Ethernet Extender Cabinet) or approved equivalent APL Number: 676-005-008 CCTO 2358 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: a. POE (power over ethernet) for CAT 5e or Cat6 b. Ethernet Interface: RJ45 c. POE converter with POE in, extended POE out, and SAFEVIEW™ display, for base side (switch) installation. 349) Ordering Number Logic: Veracity USA, Inc., Longspan, Part Number: VLS-1P-B or approved equivalent CCTO 2360 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: a. POE (power over ethernet) for CAT 5e or Cat6 b. Ethernet Interface: RJ45 c. POE converter with POE out, extended POE in, and SAFEVIEW™ display, for camera side (remote device) installation 350) Ordering Number Logic: Veracity USA, Inc., Longspan, Part Number: VLS-1P-C or approved equivalent CCTO 2362 CCTV Camera Ethernet Extender components per the following and per State of Florida Approved Products List: a. POE (power over ethernet) for CAT 5e or Cat6 b. 57V 800mA power supply for POE 351) Ordering Number Logic: Veracity USA, Inc., Part Number: VPSU-57V-800 or approved equivalent CCTO 0000 CCTV Camera Cable, Two Element Composite Cable per the following: a. Composite cable containing 1 CAT6A cable and 1 Power line (3 conductors). b. Jacket Material: Polyvinylchloride c. Spool Size: 1000 feet. 16.A.21.p Packet Pg. 1028 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 54 19-7607 Traffic Operations Signal Components & Hardware d. CAT6A Cable: 1. Number of Pairs: 4 2. Conductor Size: 23 AWG each 3. Shield: 100% Coverage Aluminum/Mylar Tape with Drain Wire. e. Power Line: 1. Number of Conductors: 3 2. Conductor Size: 12 AWG stranded each or 14 AWG stranded each. 3. Insulation Color code: Black, Red, White 352) Ordering Number Logic: CCTO 0000a Two Element Composite Cable, 1 CAT6A Cable and 1 Power Line (3 conductors, 12 AWG stranded each) 353) Ordering Number Logic: CCTO 0000b T wo Element Composite Cable, 1 CAT6A Cable and 1 Power Line (3 conductors, 14 AWG stranded each) Illuminated Sign CCTO 2402 Specification is for the LED Internally Illuminated Street Name Sign - for both single sided and double sided signs per the following and per State of Florida Approved Products List: a. Each LED internally illuminated street name sign shall include two Pelco Products Inc., or approved equivalent, mounting brackets and hardware for swing or rigid mount as required in purchase order. b. The sign assembly standard widths are in 12” increments from 48” to 120”. The heights are 24” and 30”. The overall thickness of the sign body shall be no more 3”. c. The sign body shall be fabricated in accordance with NEMA 3R standards. Sign body shall be constructed of sheet aluminum 5052H32 with a thickness of .090. The sign body enclosure shall be continuously welded. The sign body shall be reinforced to allow for mounting hardware on the back and top of the sign. The sign body shall have (2) _” weep holes in the bottom to allow filtration of any moisture. No Photocell is required. d. The color of the exterior of the sign assembly shall be semi-gloss black. All exterior surfaces of the sign assembly shall be powder-coat painted in accordance with Military Standard MIL-C-24712. Finish will meet the requirements of ASTM D 3359, ASTM D 3363, and ASTM D 552. A quality assurance program shall be in place, meeting MIL-1-45208A. e. Sign shall be UL listed and approved. f. Sign shall be able to be hung via standard PELCO mounting hardware. g. The sign face shall be constructed of 1/8” white polycarbonate or clear polycarbonate. h. Legend and border shall be diamond grade reflective film. Background shall be engineered grade reflective film. i. The sign shall have UL approved foam gaskets, to provide a watertight seal between the sign panel and the housing. j. The sign assembly including sign panel and mounting assemblies shall be designed, tested and constructed so that no permanent deformation, warping or failure will occur when subjected to 140 mph wind loads. k. The sign shall include solid-state high flux/high output ultra high brightness white LED light engineT8 bulbs (described in detail below), utilizing state-of-the-art high power LED’s and high efficient heat dissipating panel. This LED light engine bulb shall be of adequate dimension to effectively uniformly light the sign face. l. Edgelit sign shall be lit internally by installing (1) T8 LED bulb along the top edge and along the bottom edge. T8 LED bulbs will be (1) piece dimensioned to the length of the sign. m. T8 LED bulbs shall be configured for 120 v and be able to be lit and operated without the need for a ballast n. T8 LED bulbs shall have internal access via a swing down door sign face, (1) side for single sided signs and (2) sides for double sided signs. The swing down doors shall have (2) lockable hasps fastened at the top of the sign. o. All LED street name signs shall be warranted for a period of (60) months from date of delivery. 354) Ordering Number Logic: CCTO 2402a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 24" (Width x Height), Single Sided or approved equivalent 355) Ordering Number Logic: CCTO 2404a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 24" (Width x Height), Single Sided approved equivalent 356) Ordering Number Logic: CCTO 2406a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 24" (Width x Height), Single Sided approved equivalent 357) Ordering Number Logic: CCTO 2408a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 24" (Width x Height), Single Sided approved equivalent 358) Ordering Number Logic: CCTO 2410a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 24" (Width x Height), Single Sided approved equivalent 359) Ordering Number Logic: CCTO 2412a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 24" (Width x Height), Single 16.A.21.p Packet Pg. 1029 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 55 19-7607 Traffic Operations Signal Components & Hardware Sided approved equivalent 360) Ordering Number Logic: CCTO 2414a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 24" (Width x Height), Single Sided approved equivalent 361) Ordering Number Logic: CCTO 2416a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 30" (Width x Height), Single Sided approved equivalent 362) Ordering Number Logic: CCTO 2418a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 30" (Width x Height), Single Sided approved equivalent 363) Ordering Number Logic: CCTO 2420a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 30" (Width x Height), Single Sided approved equivalent 364) Ordering Number Logic: CCTO 2422a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 30" (Width x Height), Single Sided approved equivalent 365) Ordering Number Logic: CCTO 2424a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 30" (Width x Height), Single Sided approved equivalent 366) Ordering Number Logic: CCTO 2426a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 30" (Width x Height), Single Sided approved equivalent 367) Ordering Number Logic: CCTO 2428a Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 30" (Width x Height), Single Sided approved equivalent 368) Ordering Number Logic: CCTO 2402b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 24" (Width x Height), Double Sided approved equivalent 369) Ordering Number Logic: CCTO 2404b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 24" (Width x Height), Double Sided approved equivalent 370) Ordering Number Logic: CCTO 2406b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 24" (Width x Height), Double Sided approved equivalent 371) Ordering Number Logic: CCTO 2408b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 24" (Width x Height), Double Sided approved equivalent 372) Ordering Number Logic: CCTO 2410b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 24" (Width x Height), Double Sided approved equivalent 373) Ordering Number Logic: CCTO 2412b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 24" (Width x Height), Double Sided approved equivalent 374) Ordering Number Logic: CCTO 2414b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 24" (Width x Height), Double Sided approved equivalent 375) Ordering Number Logic: CCTO 2416b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 48” x 30" (Width x Height), Double Sided approved equivalent 376) Ordering Number Logic: CCTO 2418b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 60” x 30" (Width x Height), Double Sided approved equivalent 377) Ordering Number Logic: CCTO 2420b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 72” x 30" (Width x Height), Double Sided approved equivalent 378) Ordering Number Logic: CCTO 2422b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 84” x 30" (Width x Height), Double Sided approved equivalent 379) Ordering Number Logic: CCTO 2424b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 96” x 30" (Width x Height), Double Sided approved equivalent 380) Ordering Number Logic: 16.A.21.p Packet Pg. 1030 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 56 19-7607 Traffic Operations Signal Components & Hardware CCTO 2426b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 108” x 30" (Width x Height), Double Sided approved equivalent 381) Ordering Number Logic: CCTO 2428b Transportation Control Systems Inc., BriteLite Model TCSSIGNBL Series 120” x 30" (Width x Height), Double Sided approved equivalent APL Number: 700-015-024 CCTO 3146 LED Illuminated Sign, 40 watts, AC to DC Single Output Switching power supply per the following: a. Input Voltage: 120 VAC b. Fixed Output Voltage: 24VDC c. Fixed Output Current Range: 1670mA d. Fully isolated plastic case 382) Ordering Number Logic: High Perfection Tech. CO., Ltd, Part Number: LP1040-24-C1670 or approved equivalent CCTO 3148 Illuminated Sign 60 watts, Single Output Switching Power Supply per the following: a. Input Voltage: 120 VAC b. Rated Current: 1400Ma c. DC Voltage Range: 9-42V d. Constant current design e. Withstand 300VAC surge input for 5 seconds f. Fully isolated plastic case g. Suitable for LED related fixture or appliance 383) Ordering Number Logic: Mean Well (MW), Part Number: LPC-60-1400 or approved equivalent CCTO 3150 Illuminated Sign Fluorescent Ballast per the following: a. Input Voltage: 120 VAC b. Input Frequency: 50 to 60 Hz c. Starting Method: Rapid Start d. Housing Dimensions: 9.5" x 1.7" x 1.18" e. Lamp Type: F96T12/HO 384) Ordering Number Logic: Phillips Advance, Centium T12HO, Part number: ICN-2S110-SC or approved equivalent CCTO 3152 Illuminated Sign Fluorescent Ballast per the following: a. Input Voltage: 120 VAC b. Input Frequency: 50 to 60 Hz c. Starting Method: Instant Start d. Lamp Type: F24T12/HO, F48T12/HO, F72T8/HO, F96T12/HO 385) Ordering Number Logic: Phillips Advance, Signpro, Part number: ISB-0432-14-E or approved equivalent CCTO 2430 Illuminated Sign – Solar Powered Highlighted Sign per the following and per State of Florida Approved Products List: a. Power Source: Solar/Battery. b. Sign: 1. Type/Size: Various 2. Substrate: 0.080” 5052 Alloy Aluminum. 3. Sheeting: 3M Diamond Grade Reflective Sheeting with anti-graffiti protective film. 4. Legend: MUTCD Compliant R1-1 Stop Sign, MUTCD Chapter 2C Warning Signs. 5. Sizes: 24”, 30”, 36”, 48”. c. LED’s 1. 8 High-intensity red or yellow LED’s. 2. MUTCD compliant flash pattern. 3. 24 hour operation. 4. High-efficiency LED lens. 5. Sealed LED housing assembly. 16.A.21.p Packet Pg. 1031 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 57 19-7607 Traffic Operations Signal Components & Hardware d. Solar / Battery System: 1. Ultra-low power microprocessor with temperature compensating maximum power point tracking. 2. Variable intensity adjustable to ambient light. 3. 20W high efficiency monocrystalline solar panel. 4. 144 Wh (watt -hour) battery capacity (12V, 12Ah SLA). e. Enclosure: 1. 5052 Aluminum pole top mounted enclosure houses solar panel, controller, and battery. 2. Vented battery compartment with sealed electronic sub-enclosure and IP67 sealed wire harness connector. 3. Side access to battery with captive fasteners and quick disconnect terminals. 4. 8.5” W x 14.8” L x 4.7” D enclosure with 13.6” W x 18.5” L x 1” D solar panel. 5. Pole mounting option: 2” square. f. Environmental: 1. NEMA TS 2, Sections 2.2.7, 2.2.8, and 2.2.9 Compliant. 2. RoHS Compliant. 386) Ordering Number Logic: CCTO 2430a Availed Technologies Corp., Availed 20W Solar Engine - 24 Hour, Part Number: AVSE-200, or approved equivalent 387) Ordering Number Logic: CCTO 2430b Availed Technologies Corp., U-Channel Post Top Mounting Bracket for Solar Engine, Part Number: MBV09632- 001, or approved equivalent 388) Ordering Number Logic: CCTO 2430c Availed Technologies Corp., Bolt Kit, 2” Square or U Channel Pole, Part Number: MBV09629-004, or approved equivalent 389) Ordering Number Logic: CCTO 2430d Availed Technologies Corp., 12Ah 12V 144Wh SLA Battery (Extended Capacity), Part Number: MBV09618- 002, or approved equivalent 390) Ordering Number Logic: CCTO 2430e Availed Technologies Corp., LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 30" LED R1-1 Stop Sign, Part Number: AVS30-R1-1, or approved equivalent 391) Ordering Number Logic: CCTO 2430f Availed Technologies Corp., LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 36" LED R1-1 Stop Sign, Part Number: AVS36-R1-1, or approved equivalent 392) Ordering Number Logic: CCTO 2430g Availed Technologies Corp., LED Enhanced Stop Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 48" LED R1-1 Stop Sign, Part Number: AVS48-R1-1, or approved equivalent 393) Ordering Number Logic: CCTO 2430h Availed Technologies Corp., LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 30" LED Diamond Shaped Warning Sign, Part Number: AVS30-D- WXX-XX, or approved equivalent 394) Ordering Number Logic: CCTO 2430i Availed Technologies Corp., LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 36" LED Diamond Shaped Warning Sign, Part Number: AVS36-D- WXX-XX, or approved equivalent 395) Ordering Number Logic: CCTO 2430j Availed Technologies Corp., LED Enhanced Diamond Shaped Warning Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 48" LED Diamond Shaped Warning Sign, Part Number: AVS48-D- WXX-XX, or approved equivalent 396) Ordering Number Logic: CCTO 2404k Availed Technologies Corp., LED Enhanced Rectangular Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 24" w X 30" h LED Rectangular Regulatory or Warning Sign, Part Number: AVS24X30-XXX-XX, or approved equivalent 397) Ordering Number Logic: CCTO 2404l Availed Technologies Corp., LED Enhanced Rectangular Signs according to the Manual on Uniform Traffic Control Devices (MUTCD), dated 2009, 30" w X 36" h LED Rectangular Regulatory or Warning Sign, Part Number: AVS30X36-XXX-XX, or approved equivalent Sign Hanger Assembly CCTO 2964 Sign Hanger Assembly, Span Wire, Tri-Stud, per the following and per State of Florida Approved Products List. a. Span Wire Clamp, Aluminum 16.A.21.p Packet Pg. 1032 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 58 19-7607 Traffic Operations Signal Components & Hardware b. Sign mount: 16” aluminum c. Directions: 1-Way d. Stainless Steel Hardware 398) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1032-FL-PNC or approved equivalent APL Number: 659-011-021 CCTO 2966 Sign Hanger Assembly, Span Wire, Tri-Stud, per the following and per State of Florida Approved Products List. a. Span Wire Clamp, Aluminum b. Sign mount: 16” aluminum c. Directions: 2-Way d. Stainless Steel Hardware 399) Ordering Number Logic: Pelco Products, Inc. Part No. SP-1031-FL-PNC or approved equivalent APL Number: 659-011-020 CCTO 2978 Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. a. Mast Arm Clamp: Aluminum b. Cable Length: 84” c. Process no color d. Stainless Steel Hardware e. Tube Length (CTC): 18”, 24”, 30”, 36”, 42”, 48”, and 60” 400) Ordering Number Logic: CCTO 2978a Pelco Products, Inc. Part No.: SP-1010-FL-18-84-PNC or approved equivalent APL Number: 659-034-003 401) Ordering Number Logic: CCTO 2978b Pelco Products, Inc. Part No.: SP-1010-FL-24-84-PNC or approved equivalent APL Number: 659-034-003 402) Ordering Number Logic: CCTO 2978c Pelco Products, Inc. Part No.: SP-1010-FL-30-84-PNC or approved equivalent APL Number: 659-034-003 403) Ordering Number Logic: CCTO 2978d Pelco Products, Inc. Part No.: SP-1010-FL-36-84-PNC or approved equivalent APL Number: 659-034-003 404) Ordering Number Logic: CCTO 2978e Pelco Products, Inc. Part No.: SP-1010-FL-42-84-PNC or approved equivalent APL Number: 659-034-003 405) Ordering Number Logic: CCTO 2978f Pelco Products, Inc. Part No.: SP-1010-FL-48-84-PNC or approved equivalent APL Number: 659-034-003 406) Ordering Number Logic: CCTO 2978g Pelco Products, Inc. Part No.: SP-1010-FL-60-84-PNC or approved equivalent APL Number: 659-034-003 CCTO 2982 Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. a. Mast Arm Clamp: Aluminum b. Cable Length: 120” c. Process no color d. Stainless Steel Hardware e. Tube Length (CTC): 18”, 24”, 30”, 36”, 42”, 48”, and 60” 407) Ordering Number Logic: CCTO 2982a Pelco Products, Inc. Part No.: SP-1010-FL-18-120 or approved equivalent APL Number: 659-034-003 408) Ordering Number Logic: CCTO 2982b Pelco Products, Inc. Part No.: SP-1010-FL-24-120-PNC or approved equivalent APL Number: 659-034-003 409) Ordering Number Logic: CCTO 2982c Pelco Products, Inc. Part No.: SP-1010-FL-30-120-PNC or approved equivalent 16.A.21.p Packet Pg. 1033 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 59 19-7607 Traffic Operations Signal Components & Hardware APL Number: 659-034-003 410) Ordering Number Logic: CCTO 2982d Pelco Products, Inc. Part No.: SP-1010-FL-36-120-PNC or approved equivalent APL Number: 659-034-003 411) Ordering Number Logic: CCTO 2982e Pelco Products, Inc. Part No.: SP-1010-FL-42-120-PNC or approved equivalent APL Number: 659-034-003 412) Ordering Number Logic: CCTO 2982f Pelco Products, Inc. Part No.: SP-1010-FL-48-120-PNC or approved equivalent APL Number: 659-034-003 413) Ordering Number Logic: CCTO 2982g Pelco Products, Inc. Part No.: SP-1010-FL-60-120-PNC or approved equivalent APL Number: 659-034-003 CCTO 2975 Sign Hanger Assembly, Mast arm, Cable Mount per the following and per State of Florida Approved Products List. a. Mast Arm Clamp: Aluminum b. Cable Length: 144” c. Process no color d. Stainless Steel Hardware e. Tube Length (CTC): 18”, 24”, 30”, 36”, 42”, 48”, and 60” 414) Ordering Number Logic: CCTO 2975a Pelco Products, Inc. Part No.: SP-1010-FL-18-144-PNC or approved equivalent APL Number: 659-034-003 415) Ordering Number Logic: CCTO 2975b Pelco Products, Inc. Part No.: SP-1010-FL-24-144-PNC or approved equivalent APL Number: 659-034-003 416) Ordering Number Logic: CCTO 2975c Pelco Products, Inc. Part No.: SP-1010-FL-30-144-PNC or approved equivalent APL Number: 659-034-003 417) Ordering Number Logic: CCTO 2975d Pelco Products, Inc. Part No.: SP-1010-FL-36-144-PNC or approved equivalent APL Number: 659-034-003 418) Ordering Number Logic: CCTO 2975e Pelco Products, Inc. Part No.: SP-1010-FL-42-144-PNC or approved equivalent APL Number: 659-034-003 419) Ordering Number Logic: CCTO 2975f Pelco Products, Inc. Part No.: SP-1010-FL-48-144-PNC or approved equivalent APL Number: 659-034-003 420) Ordering Number Logic: CCTO 2975g Pelco Products, Inc. Part No.: SP-1010-FL-60-144-PNC or approved equivalent APL Number: 659-034-003 CCTO 2981 Sign Hanger Assembly, Mast arm, Free Swinging Cable Mount per the following and per State of Florida Approved Products List. a. Mast Arm Mini-Brac Mount b. Sign Bracket Material: Aluminum c. Cable Length: 45” to 84” d. Cable material: Stainless Steel e. Process no color f. Stainless Steel Hardware 421) Ordering Number Logic: CCTO 2981a Pelco Products, Inc. Part No.: SP-1072-FL-45-PNC or approved equivalent APL Number: 659-011-031 422) Ordering Number Logic: CCTO 2981b Pelco Products, Inc. Part No.: SP-1072-FL-62-PNC or approved equivalent APL Number: 659-011-031 423) Ordering Number Logic: CCTO 2981c Pelco Products, Inc. Part No.: SP-1072-FL-84-PNC or approved equivalent APL Number: 659-011-031 CCTO 2983 16.A.21.p Packet Pg. 1034 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 60 19-7607 Traffic Operations Signal Components & Hardware Sign Hanger Assembly, Mast arm, Free Swinging Large Hub Mount per the following and per State of Florida Approved Products List. a. Large hub mount b. Large hub Material: Aluminum c. Cable material: Stainless Steel d. Process no color e. Stainless Steel Hardware 424) Ordering Number Logic: Pelco Products, Inc. Part No.: SP-1074-FL-PNC or approved equivalent APL Number: 659-034-002 CCTO 2985 Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. a. 150 mph wind load rated. b. Number of Arms: 1-way c. Clamp type: Round and Square Pole d. Arm Length: 6’ to 14’ e. Finish: Galvanized (no paint) f. Galvanized Hardware 425) Ordering Number Logic: CCTO 2985a Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 6’ arm or approved equivalent 426) Ordering Number Logic: CCTO 2985b Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 8’ arm or approved equivalent 427) Ordering Number Logic: CCTO 2985c Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 10’ arm or approved equivalent 428) Ordering Number Logic: CCTO 2985d Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 12’ arm or approved equivalent 429) Ordering Number Logic: CCTO 2985e Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 1-Way, Galvanized (no paint), with 14’ arm or approved equivalent CCTO 2987 Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. a. 150 mph wind load rated. b. Number of Arms: 2-way c. Clamp type: Round and Square Pole d. Arm Length: 6’ to 14’ e. Finish: Galvanized (no paint) f. Galvanized Hardware 430) Ordering Number Logic: CCTO 2987a Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 6’ arm or approved equivalent 431) Ordering Number Logic: CCTO 2987b Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 8’ arm or approved equivalent 432) Ordering Number Logic: CCTO 2987c Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 10’ arm or approved equivalent 433) Ordering Number Logic: CCTO 2987d Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 12’ arm or approved equivalent 434) Ordering Number Logic: CCTO 2987e Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 2-Way, Galvanized (no paint), with 14’ arm or approved equivalent CCTO 2989 Cantilever, 1-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. a. 150 mph wind load rated. 16.A.21.p Packet Pg. 1035 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 61 19-7607 Traffic Operations Signal Components & Hardware b. Number of Arms: 1-way c. Clamp type: Round and Square Pole d. Arm Length: 6’ to 14’ e. Finish: Galvanized (Green paint) f. Galvanized Hardware 435) Ordering Number Logic: CCTO 2989a Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 6’ arm or approved equivalent 436) Ordering Number Logic: CCTO 2989b Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 8’ arm or approved equivalent 437) Ordering Number Logic: CCTO 2989c Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 10’ arm or approved equivalent 438) Ordering Number Logic: CCTO 2989d Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 12’ arm or approved equivalent 439) Ordering Number Logic: CCTO 2989e Highway Systems, Inc. Part No.: 1022 S&R (Square and Round), 1-Way, Galvanized (Green paint), with 14’ arm or approved equivalent CCTO 2991 Cantilever, 2-way, Sign Hanger Assembly for square or round pole per the following and per State of Florida Approved Products List. a. 150 mph wind load rated. b. Number of Arms: 2-way c. Clamp type: Round and Square Pole d. Arm Length: 6’ to 14’ e. Finish: Galvanized (Green paint) f. Galvanized Hardware 440) Ordering Number Logic: CCTO 2991a Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 6’ arm or approved equivalent 441) Ordering Number Logic: CCTO 2991b Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, G alvanized (Green paint), with 8’ arm or approved equivalent 442) Ordering Number Logic: CCTO 2991c Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 10’ arm or approved equivalent 443) Ordering Number Logic: CCTO 2991d Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 12’ arm or approved equivalent 444) Ordering Number Logic: CCTO 2991e Highway Systems, Inc. Part No.: 1020 S&R (Square and Round), 2-Way, Galvanized (Green paint), with 14’ arm or approved equivalent Pull, Splice and Junction Boxes CCTO 2702 Pull Box (Box) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty c. Rated: 20,000 lb. d. Open Bottom e. Inside Dimensions: Width: 13 Inches, Length: 24 Inches, Depth: 12 Inches. 445) Ordering Number Logic: Strongwell Quazite PG1324BA12 or approved equivalent APL Number: 635-001-025 CCTO 2704 Pull Box (Cover) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty w/2 Bolts 16.A.21.p Packet Pg. 1036 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 62 19-7607 Traffic Operations Signal Components & Hardware c. Rated: 20,000 lb. d. Cover shall fit the above Pull Box e. Manufacturer’s logo shall be stamped on each pull box cover along with the words “TRAFFIC CONTROL”. 446) Ordering Number Logic: Strongwell Quazite PG1324HA or approved equivalent APL Number: 635-001-025 CCTO 2706 Pull Box (Box) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty c. Rated: 20,000 lb. d. Open Bottom e. Inside Dimensions: Width: 17 Inches, Length: 30 Inches, Depth: 12 Inches. 447) Ordering Number Logic: Strongwell Quazite PG1730BA12 or approved equivalent APL Number: 635-001-014 CCTO 2708 Pull Box (Cover) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty w/2 Bolts c. Rated: 20,000 lb. d. Cover shall fit the above Pull Box e. Manufacturer’s logo shall be stamped on each pull box cover along with the words “TRAFFIC SIGNAL”. 448) Ordering Number Logic: Strongwell Quazite PG1730HA or approved equivalent APL Number: 635-001-014 CCTO 2710 Pull Box (Box) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty c. Rated: 20,000 lb. d. Open Bottom e. Inside Dimensions: Width: 24 Inches, Length: 36 Inches, Depth: 24 Inches. 449) Ordering Number Logic: Strongwell Quazite PG2436BA24 or approved equivalent APL Number: 635-001-012 CCTO 2712 Pull Box (Cover) per the following and per State of Florida Approved Products List: a. Material: Polymer Concrete b. Heavy Duty w/2 Bolts c. Rated: 20,000 lb. d. Cover shall fit the above Pull Box e. Manufacturer’s logo shall be stamped on each pull box cover along with the words “CCTO COMMUNICATIONS”. 450) Ordering Number Logic: Strongwell Quazite PG2436HA or approved equivalent APL Number: 635-001-012 Grounding Hardware CCTO 2504 Ground Rod per the following: a. Diameter: 5/8 inch b. Material: Copper Clad c. Plating Thickness: 10 mil d. Length Each: 10 ft. e. Type: Sectional f. Threaded at both ends 451) Ordering Number Logic: 16.A.21.p Packet Pg. 1037 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 63 19-7607 Traffic Operations Signal Components & Hardware nVent Erico Part Number: 635800 or approved Equivalent CCTO 2506 Ground Rod Couplings per the following: a. For Rod Size: 5/8 inch b. Material: Copper Alloy c. Threaded for Standard Sectional Rods 452) Ordering Number Logic: nVent Erico Part Number: CR58 or approved Equivalent CCTO 2508 Ground Rod Clamps per the following: a. For Rod Size: 5/8 inch b. Material: Copper Alloy c. Bolt Type: Hex Head 453) Ordering Number Logic: nVent Erico Part Number: CP58 or approved Equivalent CCTO 2510 Exothermic Grounding per the following: a. Connect #6 stranded wire to 5/8 inch Ground Rod b. NEC Compliant 454) Ordering Number Logic: nVent Erico Cadweld Part Number: GT1161L or approved equivalent Pole Line Hardware CCTO 3104 Strand Link, 1/4 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 1/4 inch b. Wire Range: .215-.270 455) Ordering Number Logic: MacLean Power Systems, Part # 5040 or approved equivalent CCTO 3106 Strand Link, 3/8 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 3/8 inch b. Wire Range = .325-.392 456) Ordering Number Logic: MacLean Power Systems, Part# 5042 or approved equivalent CCTO 3108 Strand Link, 7/16 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 7/16 inch b. Wire Range = 392-.455 457) Ordering Number Logic: MacLean Power Systems, Part# 5043 or approved equivalent CCTO 3110 Strand Link, 1/2 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 1/2 inch b. Wire Range = .455-.520 458) Ordering Number Logic: MacLean Power Systems, Part# 5044 or approved equivalent CCTO 3112 Strand Vice, 1/4 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 1/4 inch b. Wire Range = .215-.270 c. Bail Type: A (Standard) 459) Ordering Number Logic: MacLean Power Systems, Part # 5200 or approved equivalent 16.A.21.p Packet Pg. 1038 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 64 19-7607 Traffic Operations Signal Components & Hardware CCTO 3114 Strand Vice, 3/8 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 3/8 inch b. Wire Range = .325-.392 c. Bail Type: A (Standard) 460) Ordering Number Logic: MacLean Power Systems, Part# 5202 or approved equivalent CCTO 3116 Strand Vice, 7/16 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application: 7/16 inch b. Wire Range = .392-.455 c. Bail Type: A (Standard) 461) Ordering Number Logic: MacLean Power Systems, Part# 5203 or approved equivalent CCTO 3118 Strand Vice, 1/2 inch, for Utility Grade Steel Strand per the following: a. Primary Strand Application = 1/2 inch b. Wire Range = .455-.520 c. Bail Type: A (Standard) 462) Ordering Number Logic: MacLean Power Systems, Part# 5204 or approved equivalent CCTO 3120 Cable, 3/8 inch Utilities Grade Steel Strand per the following: a. Required minimum breaking strength: 11,500 pounds. b. Type of coating: Class A zinc coating in accordance with ASTM A475. c. Stranding (Number X Diameter): 7 X 0.120 d. 1000 ft. spool length 463) Ordering Number Logic: 3/8 inch Utility Grade Steel Strand CCTO 3122 Cable, 7/16 inch Utilities Grade Steel Strand per the following: a. Required minimum breaking strength: 18,000 pounds. b. Type of coating: Class A zinc coating in accordance with ASTM A475. c. Stranding (Number X Diameter): 7 X 0.145 d. 1000 ft. spool length 464) Ordering Number Logic: 7/16 inch Utility Grade Steel Strand CCTO 3124 Cable, 1/2 inch Utilities Grade Steel Strand per the following: a. Required minimum breaking strength: 25,000 pounds. b. Type of coating: Class A zinc coating in accordance with ASTM A475. c. Stranding (Number X Diameter): 7 X 0.165 d. 1000 ft. spool length 465) Ordering Number Logic: 1/2 inch Utility Grade Steel Strand CCTO 3126 Utility Pole Hardware per the following: a. Fiberglass Insulator b. Minimum Strength (lb) - 36,000 c. Rod Length: 120 inches (10 ft.) d. End Fittings - Clevis - Clevis 466) Ordering Number Logic: MacLean Power Systems, Part# GCC36-120 or approved equivalent CCTO 3128 16.A.21.p Packet Pg. 1039 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 65 19-7607 Traffic Operations Signal Components & Hardware Pole Line Hardware per the following: a. Square Washer b. Hole Size: for 3/4” Bolt c. Size: 3/16” x 3” d. Material: Galvanized Steel 467) Ordering Number Logic: MacLean Power Systems, Part# J1078 or approved equivalent CCTO 3130 Oval Eyebolt per the following: a. 3/4 Inch Diameter b. Minimum Tensile Strength 20,050 Lbs. c. Hot Dip Galvanized d. Bolt Length: 16 Inches e. Thread Length: 14 Inches f. Weight/100: 300 lbs 468) Ordering Number Logic: MacLean Power Systems, Catalog Number: J9636 or approved equivalent CCTO 3132 Oval Eyebolt per the following: a. 3/4 Inch Diameter b. Minimum Tensile Strength 20,050 Lbs. c. Hot Dip Galvanized d. Bolt Length: 20 Inches e. Thread Length: 18 Inches f. Weight/100: 340 lbs 469) Ordering Number Logic: MacLean Power Systems, Catalog Number: J9640 or approved equivalent CCTO 3134 Oval Eyebolt per the following: a. 3/4 Inch Diameter b. Minimum Tensile Strength 20,050 Lbs. c. Hot Dip Galvanized d. Bolt Length: 24 Inches e. Thread Length: 22 Inches f. Weight/100: 380 lbs 470) Ordering Number Logic: MacLean Power Systems, Catalog Number: J9644 or approved equivalent CCTO 3136 Eyelet, Angle, per the following: a. For 3/4 Inch Diameter bolt b. Drop-forged galvanized steel 471) Ordering Number Logic: Hubbell Power Systems Inc., Chance Utility, Catalog Number: 0101 or approved equivalent CCTO 3137 Eyelet per the following: a. For 3/4 Inch Diameter bolt b. Drop-forged galvanized steel c. Galvanized, ASTM A-153 472) Ordering Number Logic: Hubbell Power Systems Inc., Chance Utility, Catalog Number: 6503 or approved equivalent CCTO 0000 Lashing Rods per the following: a. Material: Galvanized Steel b. Length: 5 feet c. Units: 100 per carton 473) Ordering Number Logic: 16.A.21.p Packet Pg. 1040 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 66 19-7607 Traffic Operations Signal Components & Hardware CCTO 0000a Multicom, Inc., Lashing Rods, Diameter Range: .670” to .749”, Catalog Number: LR-6105 or approved equivalent 474) Ordering Number Logic: CCTO 0000b Multicom, Inc., Lashing Rods, Diameter Range: .750” to .839”, Catalog Number: LR-6106 or approved equivalent 475) Ordering Number Logic: CCTO 0000c Multicom, Inc., Lashing Rods, Diameter Range: .840” to .939”, Catalog Number: LR-6107 or approved equivalent 476) Ordering Number Logic: CCTO 0000d Multicom, Inc., Lashing Rods, Diameter Range: .940” to 1.049”, Catalog Number: LR-6108 or approved equivalent 477) Ordering Number Logic: CCTO 0000e Multicom, Inc., Lashing Rods, Diameter Range: 1.050” to 1.169”, Catalog Number: LR-6109 or approved equivalent 478) Ordering Number Logic: CCTO 0000f Multicom, Inc., Lashing Rods, Diameter Range: 1.170” to 1.309”, Catalog Number: LR-6110 or approved equivalent 479) Ordering Number Logic: CCTO 0000g Multicom, Inc., Lashing Rods, Diameter Range: 1.310” to 1.459”, Catalog Number: LR-6111 or approved equivalent 480) Ordering Number Logic: CCTO 0000h Multicom, Inc., Lashing Rods, Diameter Range: 1.460” to 1.629”, Catalog Number: LR-6112 or approved equivalent 481) Ordering Number Logic: CCTO 0000i Multicom, Inc., Lashing Rods, Diameter Range: 1.630” to 1.819”, Catalog Number: LR-6113 or approved equivalent 482) Ordering Number Logic: CCTO 0000j Multicom, Inc., Lashing Rods, Diameter Range: 1.820” to 2.039”, Catalog Number: LR-6114 or approved equivalent IMSA Traffic Signal Cable CCTO 1702 Traffic Signal Cable, IMSA 50-2, Stranded, AWG 14, 2 Conductors per the following: a. IMSA Specification: 50-2 b. Cable Length: 5000 ft. Spool c. Conductor Type: Stranded (19) d. Color Code: per Specification e. Conductor Insulation: Polyethylene f. Cable Jacket: Black Polyethylene g. Aluminum / Mylar Tape 483) Ordering Number Logic: IMSA 50-2 CCTO #2602 Traffic Signal Cable, IMSA 19-1, Stranded, AWG 14 per the following: a. IMSA Specification: 19-1 b. Cable Length: 2000 ft. Spool c. Conductor Type: Stranded (7) d. Color Code: per Specification e. Conductor Insulation: Polyethylene f. Cable Jacket: Black PVC 484) Ordering Number Logic: CCTO 2602a 5 Conductor 485) Ordering Number Logic: CCTO 2602b 7 Conductor 486) Ordering Number Logic: CCTO 2602c 9 Conductor 487) Ordering Number Logic: CCTO 2602d 12 Conductor 488) Ordering Number Logic: CCTO 2602e 15 Conductor 16.A.21.p Packet Pg. 1041 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 67 19-7607 Traffic Operations Signal Components & Hardware 489) Ordering Number Logic: CCTO 2602f 18 Conductor CCTO 2604 Traffic Signal Cable, IMSA 20-1, Stranded, AWG 14 per the following: a. IMSA Specification: 20-1 b. Cable Length: 2000 ft. Spool c. Conductor Type: Stranded (7) d. Color Code: per Specification e. Conductor Insulation: Polyethylene f. Cable Jacket: Black PE 490) Ordering Number Logic: CCTO 2604a 5 Conductor 491) Ordering Number Logic: CCTO 2604b 7 Conductor 492) Ordering Number Logic: CCTO 2604c 9 Conductor 493) Ordering Number Logic: CCTO 2604d 12 Conductor 494) Ordering Number Logic: CCTO 2604e 15 Conductor 495) Ordering Number Logic: CCTO 2604f 18 Conductor Electrical Power Service Hardware CCTO 2802 Wire, XHHW, Stranded, #6 AWG per the following: a. Insulated b. Stranded c. Type: XHHW d. Conductor Size (AWG): 6 e. Length: 500 ft Spools 496) Ordering Number Logic: CCTO 2802a Cable Outer Jacket Color: White 497) Ordering Number Logic: CCTO 2802b Cable Outer Jacket Color: Black 498) Ordering Number Logic: CCTO 2802c Cable Outer Jacket Color: Green CCTO 2804 Load Center, 100A, Fixed - Factory installed main lugs, 120/240VAC per the following: a. Short Circuit Current Rating: 10 kA b. Maximum Single Pole Circuits: 12 c. Maximum Tandem Circuit Breakers: 6 d. Spaces: 6 e. Ampere Rating: 100A f. Voltage Rating: 120/240VAC g. Grounding Bar Included h. Cover Type: Surface i. Enclosure Type: Outdoor/Rainproof j. Enclosure Rating: NEMA 3R k. UL Listed 499) Ordering Number Logic: Square D Cat. No. QO612L100TRB or approved equivalent CCTO 2805 Meter Base, per the following: a. Meter Base approved by Florida Power & Light (FPL). b. Material: Aluminum, Type 3R, UL Listed c. Type: Ringless Meter Socket d. Voltage Rating: 600 Volts Alternating Current 16.A.21.p Packet Pg. 1042 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 68 19-7607 Traffic Operations Signal Components & Hardware e. Amperage Rating:125 Continuous Amps 500) Ordering Number Logic: Milbank UAP8435-XL-TG-HSP or approved equivalent. CCTO 2806 Lightning Arrester, Controller Cabinet (Electric Power Service Index 17736 -2002) per the following: a. Designed for outdoor installation. b. Parallel metal oxide varistors (MOV) from each line to ground neutral. c. Molded polycarbonate housing with ½”x20 threaded nipple weatherproof and UV resistant. d. Epoxy encapsulation to protect components from moisture, dirt and corrosion e. Color coded 18” leads at 14 gauge. f. UL listed g. 120/240 volt single phase, 2 pole 3 wire up to 1000 amp service capacity. 501) Ordering Number Logic: Intermatic AG2401C or approved equivalent. Electrical Hardware CCTO 2824 Contactor, 40A, 3HP@115VAC per the following: a. Ampere Rating: 40A b. Maximum Voltage Rating: 600VAC c. Number of Poles: 2-Pole d. Operating Voltage: 120VAC@60Hz - 110VAC@50Hz e. Approvals: UL Listed - CSA Certified - CE Marked 502) Ordering Number Logic: Square D Part # 8910DPA42V02 Contactor or approved equivalent CCTO 2826 Terminal Strips, 12 Circuit per the following: a. Product Description: 12 Circuit Terminal Strip b. Electrical Rating – 30 amps, 600 volts. c. Manufacturer: General Electric. d. Part Number: CR151B2. 503) Ordering Number Logic: General Electric Terminal Strip, Part Number CR151B2 or approved equivalent VENDOR CHECKLIST ***Vendor should check off each of the following items as the necessary action is completed (please see, Form 2: Vendor Check List): The Solicitation Submittal has been signed. The Solicitation Pricing Document (Bid Schedule/Quote Schedule/Proposal Pricing/etc.) has been completed and attached. All applicable forms have been signed and included, along with licenses to complete the requirements of the project. Any addenda have been signed and included. Affidavit for Claiming Status as a Local Business, if applicable. Division of Corporations - Florida Department of State – http://dos.myflorida.com/sunbiz/ (If work performed in the State). E-Verify/Immigration Affidavit (Memorandum of Understanding). The County requires that the vendor submits no fewer than three (3) completed reference forms from clients whose projects are of a similar nature to this solicitation as a part of their proposal. Provide information on the projects completed by the vendor that best represent projects of similar size, scope and complexity of this project using the Reference Form provided. Vendors may include two (2) additional pages for each project to illustrate aspects of the completed project that provides the information to assess the experience of the Proposer on relevant work. 16.A.21.p Packet Pg. 1043 Attachment: 19-7607 Solicitation (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Co ier County Mminisfrath’e Services Depaitnent Procurement Services Divis~on Form 2:Vendor Check List IMPORTANT:THIS SHEET MUST BE SIGNED.Please read carefully,sign in the spaces indicated and return with your Proposal. Vendor should check off each of the following items as the necessary action is completed: ~The Solicitation Submittal has been signed. ~The Solicitation Pricing Document (Bid Schedule/Quote Schedule etc.)has been completed and attached. 2’All applicable forms have been signed and included,along with licenses to complete the requirements of the project. I3-~Any addenda have been signed and included. D Affidavit for Claiming Status as a Local Business,if anDlicable. Division of Corporations -Florida Department of State —http://dos.myflorida.com/sunbiz/(If work performed in the State). ia E-Veri~’/Immigration Affidavit (Memorandum of Understanding). ALL SUBMITTALS MUST HAVE THE SOLICITATION NUMBER AND TITLE Name of Firm:Temple,Inc. Address:305 Bank St City,State,Zip:Decatur,AL 35601 Telephone:256-353-3820 Email:keith.frasier@temple-inc.com Repiesenuitive Siginitute —,Z41.——~.aa4 Representative Name:Keith A.Frasier Date 29 July 2019 16.A.21.q Packet Pg. 1044 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Co icr County AdminisfraWe Sensices Depatnent Procurement Services Dwision Form 3:Conflict of Interest Affidavit The Vendor certifies that,to the best of its knowledge and belief,the past and current work on any Collier County project affiliated with this solicitation does not pose an organizational conflict as described by one of the three categories below: Biased ground rules —The firm has not set the “ground mies”for affiliated past or current Collier County project identified above (e.g.,writing a procurement’s statement of work,specifications,or performing systems engineering and technical direction for the procurement)which appears to skew the competition in favor of my firm. Impaired objectivity —The firm has not performed work on an affiliated past or current Collier County project identified above to evaluate proposals past performance of itself or a competitor,which calls into question the contractor’s ability to ieridei linpatUal advice to (lie goveiinneiit. Unequal access to information —The firm has not had access to nonpublic information as part of its performance of a Collier County project identified above which may have provided the contractor (or an affiliate)with an unfair competitive advantage in current or future solicitations and contracts. In addition to this signed affidavit,the contractor /vendor must provide the following: I.All documents produced as a result of the work completed in the past or currently being worked on for the above-mentioned project;and, 2.Indicate if the information produced was obtained as a matter of public record (in the “sunshine”)or through non-public (not in the “simshine”)conversation (s),meeting(s),document(s)and/or other means. Failure to disclose all material or having an organizational conflict in one or more of the three categories above be identified,may result in the disqualification for future solicitations affiliated with the above referenced project(s). By the signature below,the firm (employees,officers and/or agents)certifies,and hereby discloses,that,to the best of their knowledge and belief,all relevant facts concerning past,present,or currently planned interest or activity (financial,contractual,organizational, or otherwise)which relates to the project identified above has been fully disclosed and does not pose an organizational conflict. Firm:Temple,Inc. Signature and Date:/1 29 July 2019 Print Name:Keith A.Frasier Title of Signatory:Florida Sales &Service 16.A.21.q Packet Pg. 1045 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) BOARD OF COUNTY COMMISSIONERS Collier County Government Complex Naples,Florida 34112 Dear Commissioners: Co ier County Administrative Services Depart~ient Procurement Services OMSIa, Form 4:Vendor Declaration Statement The undersigned,as Vendor declares that this response is made without connection or arrangement with any other person and this proposal is in every respect fair and made in good faith,without collusion or fraud. The Vendor agrees,if this solicitation submittal is accepted,to execute a Collier County document for the purpose of establishing a fonnal contractual relationship between the firm and Collier County,for the performance of all requirements to which the solicitation pertains.The Vendor states that the submitted is based upon the documents listed by the above referenced Solicitation.Further,the vendor agrees that if awarded a contract for these goods and/or services,the vendor will not be eligible to compete,submit a proposal,be awarded,or perform as a sub-vendor for any future associated with work that is a result of this awarded contract IN WrI’NESS WHEREOF,WE have hereunto subscribed our names on this 29th__day of July ,20_19_in the County of Morgan ,in the State of Alabama Firm’s Legal Name: Address: Temple,Inc. 305 Bank St City,State,Zip Code:Decatur,AL 35601 Florida Certificate of Authority Document Number Federal Tax Identification Number *CCR ft or CAGE Code *Only if Grant Funded F02000000 158 630573758 1U7H8 Telephone:256-353-3820 Signature by: (Typed and written) Title: Keith A.Frasier J j ~ Florida Sales &Service My Commission Expkee: June 28,2021 16.A.21.q Packet Pg. 1046 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Additional Contact Information Send payments to:Temple,Inc. (required if different from Company name used as payee above) Contact name:Sandra Payne Title:Accounts Mgr Address:P0 Box 2066 City,State,ZIP Decatur,AL 35602 Telephone:256-353-3820 Email:Sandra.payne(~tempIe-inc.corn Office servicing Collier County to place orders (required if different from above) Contact name: Title: Address: City,State,ZIP Telephone: Email: 16.A.21.q Packet Pg. 1047 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Co icr County Mministrative Services Oepatnent Procurement SeMces Division Form 5:Immigration Affidavit Certification This Affidavit is required and should be signed,notarized by an authorized principal of the firm and submitted with formal solicitation submittals.Further,Vendors are required to enroll in the E-Veri~’program,and provide acceptable evidence of their enrollment,at the time of the submission of the Vendor’s proposal.Acceptable evidence consists of a copy of the properly completed E-Veri& Company Profile page or a copy of the fully executed E-Veri~’Memorandum of Understanding for the company.Failure to include this Affidavit and acceptable evidence of enrollment in the E-Verifv proram may deem the Vendor’s proposal as non- responsive. Collier County will not intentionally award County contracts to any Vendor who knowingly employs unauthorized alien workers, constituting a violation of the employment provision contained in 8 u.s.c.section 1324 a(e)Section 274A(e)of the Immigration and Nationality Act (“NA”). collier county may consider the employment by any Vendor of unauthorized aliens a violation of Section 274A (e)of the NA.Such Violation by the recipient of the Employment Provisions contained in Section 274A (e)of the INA shall be grounds for unilateral termination of the contract by Collier County. Vendor attests that they are fully compliant with all applicable immigration laws (specifically to the 1986 Immigration Act and subsequent Amendment(s))and agrees to comply with the provisions of the Memorandum of Understanding with E-Veri&and to provide proof of enrollment in The Employment Eligibility Verification System (E-Veri&),operated by the Department of Homeland Security in partnership with the Social Security Administration at the time of submission of the Vendor’s proposal. company Name Temple,Inc Print Name Keith A.Frasier Title Florida Sales &Service Signature Date 29 July 2019 State of_Alabama County of Morgan The signee of these Affidavit guarantees,as evidenced by the sworn affidavit required herein,the truth and accuracy of this affidavit to interrogatories hereinafter made. faa,. My CommIssion Expiret June 28,2021 16.A.21.q Packet Pg. 1048 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) A&ninsh*~?e Se,vces Depathient P,oQrerneffi Een,ces DMSa, Form 6:Vendor Substitute W —9 Request for Taxpayer Identification Number and Certification In accordance with the Internal Revenue Service regulations,Collier County is required to collect the following information for tax reporting purposes from individuals and companies who do business with the County (including social security numbers if used by the individual or company for tax reporting purposes).Florida Statute 119.071(5)requires that the county notify you in writing of the reason for collecting this information,which will be used for no other purpose than herein stated. Please complete all information that applies to your business and return with your quote or proposal. 1.General Information (provide all information) Taxpayer Name Temple,Inc. (as shown on income tax return) Business Name (U dfferent from taxpayer name) Address 305 Bank St City Decatur State AL Zip3560l Telephane Fmiil Order Information (Must be filled out)Remit!Payment Information (Must be filled out) Address P0 Box 2066 Address PC Box 2066 City Decatur State AL Zip 35602 City Decatur State AL Zip 35602 Eiiipll Email sandra.payne©temple-inc.com Company Status (check only one) Sole Proprietor xCorporation Partnership Tn~c Fxeinpt (FCdCLUI income tax—exeirlIlt entity —I united liability C’oinpany under Internal Revenue Service guidelines IRC 501 (c)3)Enter the tax classification ID Di.cregarded Entity.C Cornoratign.P Partnershin, 3.Taxpayer Identification Number (for tax reporting purp oses only) Federal Tax Identification Number (TIN)630573758 (Vendors who do not have a TIN,will be required to provide a social security number prior to an award). 4.Sign and Date Form:Certification: Under penalties of perjury,I certify that the information shown on this form is correct to my knowledge. Signatur~_~Ar Date 29 July 2019 Title Florida Sales &Service___________________________________Phone Number 256-353- 3820 2. 16.A.21.q Packet Pg. 1049 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) coiL county Mministafr.’e Sei*es Deparhnent Procurement Services Division Form 7:Vendor Submittal —Local Vendor Preference Affidavit (Check Appropriate Boxes Below) State of Florida (Select County if Vendor is described as a Local Business) D Collier County D Lee County Vendoi affirms that it is a local business as defined by the Piocuienient Oidinance of [lie Colliti County Boaid of County Commissioners and the Regulations Thereto.As defined in Section XV of the Collier County Procurement Ordinance: Local business means the vendor has a current Business Tax Receipt issued by the Collier County Tax Collector prior to bid or proposal submission to do business within Collier County,and that identifies the business with a permanent physical business address located within the limits of Collier County from which the vendor’s staff operates and performs business in an area zoned for the conduct of such business.A Post Office Box or a facility that receives mail,or a non-permanent structure such as a construction trailer,storage shed,or other non permanent structure shall not be used for the purpose of establishing said physical address.In addition to the foregoing,a vendor shall not be considered a “local business”unless it contributes to the economic development and well-being of Collier County in a verifiable and measurable way.This may include,but not be limited to,the retention and expansion of employment opportunities,support and increase to the County’s tax base,and residency of employees and principals of the business within Collier County.Vendors shall affirm in writing their compliance with the foregoing at the time of submitting their bid or proposal to be eligible for consideration as a “local business”under this section.A vendor who misrepresents the Local Preference status of its firm in a proposal or bid submitted to the County will lose the privilege to claim Local Preference status for a period of up to one year under this section. Vendor must complete the following information: Year Business Established in QCollier County or Q Lee County: Number of Employees (Including Owner(s)or Corporate Officers): Number of Employees Living in Q Collier County or Q Lee (Including Owner(s)or Corporate Officers): If requested by the County,vendor will be required to provide documentation substantiating the information given in this affidavit.Failure to do so will result in vendor’s submission being deemed not applicable. Vendor Name:Date: Address in Collier or Lee County: Signature:Title: NOT APPLICABLE 4c~— Ke’4-k A-.Frcc&cr 16.A.21.q Packet Pg. 1050 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) S l)~,r J)t (‘J$&Ei4446rg ~,rJr(~)(JJ)\iitJ 01.1 i.ios~.~ç F!”t k!~;~eh ~ ~spartment of State I Division of Corporations I Search Records I flejaji y Document Number I Detail by Entity Name Foreign Profit Corporation TEMPLE,INC. filing Information Document Number F02000000158 FEIIEIN Number 63-0573758 Date Filed 01/09/2002 State AL Status ACTIVE Last Event CANCEL ADM DISS/REV Event Date Filed 0l/04/2010 Event Effective Date NONE &in~ipal Address 305 BANK STREET DECATUR,AL 35601 Changed:04/20/2011 Mailing Address RO.BOX 2066 DECATUR,AL 35602 Efigistered Agent Name &Address CARDOZO,IAN 5937 Fish Hawk Crossing Blvd. LITHIA,FL 33547 Name Changed:09/21/2007 Address Changed:01/23/2013 Officer/Director Detail Name &Address Title Chairman of the Board TEMPLE,WIIiam Blake RO.BOX 2066 DECATUR,AL 35602 Title CEO DIVtStON OF C0RP0RATtONS SUnbiz proof p1 of3 16.A.21.q Packet Pg. 1051 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Title President Temple,Forrest Smith RO.BOX 2066 DECATUR,AL 35602 Title MR. CARDOZO,IAN B P0937 LITHIA,FL 33547 Title Secretary Temple,Faye Adams RO.BOX 2066 DECATUR,AL 35602 Title Treasurer Temple,Gayle Allen RO.BOX 2066 DECATUR,AL 35602 Annual Reporj~ Report Year 2017 2018 2019 Document lmag~ Sun b iz p 2 pf 3 01/29/2019—ANNUAL REPORT 01/15/2018—ANNUAL REPORT 02/0912017 --ANNUAL REPORT 02/22)2016—ANNUAL REPORT 04/14/2015 --ANNUAL REPORT 03/2612014—ANNUAL REPORT 01/2312013--ANNUAL REPORT 04/0512012 —ANNUAL REPORT 04120/2011 —ANNUAL REPORT 0110412010—REINSTATEMENT 11/08/2008.-REINSTATEMENT 09/21/2007—REINSTATEMENT 09/18/2006--REINSTATEMENT 10/27/2005 —REINSTATEMENT View image in PDE format View image in POE format View image in PDF format View image in POF format View image in POE format View image in POEformat View image in POE format View image in POE format View image in POE format View image in POP format View image in POF format View image in POE format View image in POE format View image in POE format TEMPLE,Kenneth Blair RO.BOX 2066 DECATUR,AL 35602 Filed Date 02/09/20 17 01/15/2018 01/29/20 19 16.A.21.q Packet Pg. 1052 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 04126/2004 —ANNUAL REPORT View image in POF fOf~J Su nbiz 0210612003—ANNUAL REPORT View image in PDF format p 3 of 3 0110912002 —Foreig~~gffl View image in PDF format or Crr-rrorot 000 16.A.21.q Packet Pg. 1053 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) :Everjfy Welcome E MENU William temple Company Information Company Name temple,inc. Company ID Number 131008 Doing Business As (DEA)Name DONS Number Physical Location Address I 305 bank street Address 2 City decatur Slate AL Zip Code 35601 County MORGAN Mailing Address Address I p.o.box 2066 Address 2 City decatur State AL Zip Code 35602 Additional Infornation Employer Identification Number 630573758 Total Number of Employees 20 to 99 Parent Crganlzation temple,inc. AdminIstrator Organization Designation Employer Category Viewl Edit NAICS Code 334-COMPUTER AND ELECTRONIC PRODUCT MANUFACTURING View /Edit Total Hiring Sites 16.A.21.q Packet Pg. 1054 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) INSURANCE ANI~BONDING REQUIREMENTS Insurance I Bond Type Required Limits E Worker’s Compensation Statutory Limits of Florida Statutes,Chapter 440 and all Federal Government Statutory Limits and Requirements Evidence of Workers’Compensation coverage or a Certificate of Exemption issued by the State of Florida is required.Entities that are formed as Sole Proprietorships shall not be required to provide a proof of exemption.An application for exemption can be obtained online at https f/apps fldfs com/bocexemot! 2 ~Employer’s Liability S_500,000_______single limit per occurrence 3 ~Commercial General Bodily Injury and Property Damage Liability (Occurrence Form) patterned after the current S_1,000,000_single limit per occurrence,$2,000,000 aggregate for Bodily Injury ISO form Liability and Property Damage Liability This shall include Promises and Operations; Independent Contractors,Products and Completed Operations and Contractual Liability 4 ~Indemnification To the maximum extent permitted by Florida law,the Contractor/Vendor shall defend, indemni~’and hold harmless Collier County,its officers and employees from any and all liabilities,damages,losses and costs,including,but not limited to,reasonable attorneys’fees and paralegals’fees,to the extent caused by the negligence, recklessness,or intentionally wrongful conduct of the Contractor!Vendor or anyone employed or utilized by the Contractor/Vendor in the performance of this Agreement. 5 ~Automobile Liability $_i,000,000 Each Occurrence,Bodily Injury &Property Damage Owned/Non-owned/Hired,Automobile Included 6 LI Other insurance as noted LI Watercraft $___________Per Occurrence 7.fl Bid bond Shall be submitted with proposal response in the form of certified funds,cashiers’ check or an irrevocable letter of credit,a cash bond posted with the County Clerk,or proposal bond in a sum equal to 5%of the cost proposal All checks shall be made payable to the Collier County Board of County Commissioners on a bank or trust company located in the State of Florida and insured by the Federal Deposit Insurance Corporation 8 Q Performance and Payment For projects in excess of $200,000,bonds shall be submitted with the executed Bonds contract by Proposers receiving award,and wiitten foi 100%of the Contiact awaid amount,the cost borne by the Proposer receiving aa award The Performance and Payment Bonds shall be underwritten by a surety authorized to do business in the State of Florida and otherwise acceptable to Owner,provided,however,the surety shall be rated as “A-”or better as to general policy holders rating and Class V or higher rating as to financial size category and the amount required shall not exceed 5%of the reported policy holders’surplus,all as reported in the most current Best Key Rating Guide,published by A.M Best Company,Inc.of 75 Fultoa Street,New York,New York 10038 9 ~Vendor shall ensure that all subcontractors comply with the same insurance requirements that he is required to meet The same Vendor shall provide County with certificates of insurance meeting the required insurance provisions 10.~Collier County must be named as “ADDITIONAL INSURED”on the Insurance Certificate for Commercial General Liability where required This insurance shall be primary and non-contributory with respect to any other insurance maintained by,or available for the benefit of,the Additional Insured and the Vendor’s policy shall be endorsed accordingly 11.~The Certificate Holder shall be named as Collier County Board of County Commissioners,OR,Board of County Commissioners in Collier County,OR Collier County Government,OR Collier County The Certificates of Insurance must state the Contract Number,or Project Number,or specific Project description,or must read For any and all work performed on behalf of Collier County 16.A.21.q Packet Pg. 1055 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 12.~On all certificates,the Certificate Holder must read:Collier County Board of Commissioners,3295 Tamiami Trail East, Naples,FL 34112 13.~Thirty (30)Days Cancellation Notice required. 14.Collier County shall procure and maintain Builders Risk Insurance on all construction projects where it is deemed necessary. Such coverage shall be endorsed to cover the interests of Collier County as well as the Contractor.Premiums shall be billed to the project and the Contractor shall not include Builders Risk premiums in its project proposal or project billings.All questions regarding Builder’s Risk Insurance will be addressed by the Collier County Risk Management Division. 6121/19 -CC Vendor’s Insurance Statement We understand the insurance requiieinents of these specifications arid that the evidence of insurability may be required within five (5)days of the award of this solicitation.The insurance submitted must provide coverage for a minimum of six (6)months from the date of award. Name of Firm Tern le Inc.Date 8 Aug 2019 Vendor Signature Print Name Keith A.Frasier Insurance Agency Valent Group (formally SS Nesbitt) Agent Name CalTie Williams Telephone Number_2562601202 16.A.21.q Packet Pg. 1056 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) User Manual PD900 Series PTZ Dome Camera 16.A.21.q Packet Pg. 1057 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 2 Note: To ensure proper operation, please read this manual thoroughly before using the product and retain the information for future reference. Copyright © 2019 Siqura B.V. All rights reserved. PD900 Series User Manual v2 (190504-1) AIT55 Nothing from this publication may be copied, translated, reproduced, and/or published by means of printing, photocopying, or by any other means without the prior written permission of Siqura. Siqura reserves the right to modify specifications stated in this manual. Brand names Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant product components, this manual may nonetheless contain errors and inaccuracies. We invite you to offer your suggestions and comments by email via t.writing@siqura.com. Your feedback will help us to further improve our documentation. How to contact us If you have any comments or queries concerning any aspect related to the product, do not hesitate to contact: Siqura B.V. Siqura Inc. Meridiaan 32 12920 Cloverleaf Center Drive 2801 DA Gouda Germantown, Maryland, 20874 The Netherlands United States of America General : +31 182 592 333 General : +1 301 444 2200 Fax : +31 182 592 123 E-mail : sales.nl@siqura.com Email : sales.us@siqura.com WWW : https://siqura.com 16.A.21.q Packet Pg. 1058 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 3 Contents 1 ABOUT THIS MANUAL .............................................................................................................................. 5 2 PRODUCT OVERVIEW ............................................................................................................................... 7 3 WEB INTERFACE ....................................................................................................................................... 9 3.1 HOME PAGE ............................................................................................................................................. 10 3.1.1 Function items on home page .......................................................................................................... 10 3.1.2 Function buttons on Home page ...................................................................................................... 11 3.2 SYSTEM ................................................................................................................................................... 13 3.2.1 System .............................................................................................................................................. 13 3.2.2 Security ............................................................................................................................................. 14 3.2.2.1 User ......................................................................................................................................................... 14 3.2.2.2 HTTPS ...................................................................................................................................................... 15 3.2.2.3 Ip Filter .................................................................................................................................................... 16 3.2.2.4 IEEE 802.1X .............................................................................................................................................. 17 3.2.3 Network ............................................................................................................................................ 18 3.2.3.1 Basic ........................................................................................................................................................ 18 3.2.3.2 QoS .......................................................................................................................................................... 19 3.2.3.3 SNMP ....................................................................................................................................................... 20 3.2.3.4 UpnP ........................................................................................................................................................ 21 3.2.3.5 Diamond Protocol .................................................................................................................................... 21 3.2.4 DDNS ................................................................................................................................................ 21 3.2.5 Mail .................................................................................................................................................. 22 3.2.6 FTP .................................................................................................................................................... 22 3.2.7 HTTP ................................................................................................................................................. 22 3.2.8 Events (Alarm Settings) .................................................................................................................... 22 3.2.8.1 Application .............................................................................................................................................. 22 3.2.8.2 Motion detection..................................................................................................................................... 24 3.2.8.3 Network failure detection ....................................................................................................................... 27 3.2.8.4 Periodical event ....................................................................................................................................... 28 3.2.8.5 Manual Trigger ........................................................................................................................................ 29 3.2.8.6 Audio Detection ....................................................................................................................................... 31 3.2.9 Storage Management ...................................................................................................................... 33 3.2.9.1 SD Card .................................................................................................................................................... 33 3.2.9.2 Network Share (NAS) ............................................................................................................................... 34 3.2.10 Recording ..................................................................................................................................... 35 3.2.11 Schedule ....................................................................................................................................... 36 3.2.12 File Location (Snapshots and Web Recording) ............................................................................. 37 3.2.13 View Information ......................................................................................................................... 37 3.2.13.1 Log File..................................................................................................................................................... 37 3.2.13.2 User Information ..................................................................................................................................... 37 3.2.13.3 Parameters .............................................................................................................................................. 37 3.2.14 Factory Default ............................................................................................................................ 37 3.2.15 Software Version .......................................................................................................................... 38 3.2.16 Software Upgrade ........................................................................................................................ 38 3.2.17 Maintenance ................................................................................................................................ 38 3.3 STREAMING .............................................................................................................................................. 39 3.3.1 Video Configuration (Video Format & Resolution) ........................................................................... 40 3.3.2 Video Rotation .................................................................................................................................. 41 3.3.3 Video Text Overlay ........................................................................................................................... 41 3.3.4 Video OCX Protocol........................................................................................................................... 42 3.3.5 Audio (Audio Mode and Bit Rate Settings) ....................................................................................... 42 3.4 CAMERA .................................................................................................................................................. 43 3.4.1 Exposure ........................................................................................................................................... 44 16.A.21.q Packet Pg. 1059 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Contents Page 4 3.4.2 White Balance .................................................................................................................................. 44 3.4.3 Picture Adjustment ........................................................................................................................... 45 3.4.4 IR Function ........................................................................................................................................ 46 3.4.5 Noise Reduction ................................................................................................................................ 47 3.4.6 WDR Function ................................................................................................................................... 47 3.4.7 Digital Zoom ..................................................................................................................................... 47 3.4.8 Backlight ........................................................................................................................................... 47 3.4.9 Image Stabilizer ................................................................................................................................ 47 3.4.10 Profile ........................................................................................................................................... 48 3.4.11 TV System ..................................................................................................................................... 48 3.5 PTZ ........................................................................................................................................................ 48 3.5.1 Preset ............................................................................................................................................... 49 3.5.2 Cruise ................................................................................................................................................ 49 3.5.3 Auto Pan ........................................................................................................................................... 50 3.5.4 Sequence .......................................................................................................................................... 50 3.5.5 Home Function ................................................................................................................................. 51 3.5.6 Tilt Range ......................................................................................................................................... 51 3.5.7 Privacy Mask .................................................................................................................................... 51 3.5.8 PTZ Setting ....................................................................................................................................... 53 3.5.9 RS485 ................................................................................................................................................ 53 3.6 LOGOUT .................................................................................................................................................. 53 APPENDIX A: INSTALL UPNP COMPONENTS ................................................................................................... 55 APPENDIX B: ADDRESSES FROM DECIMAL TO BINARY ..........................................…....................................... 57 APPENDIX C: JPG PICTURE PULL AUTHENTICATION ....................................................................….................. 59 APPENDIX D: RTSP VIDEO STREAMS URL ......................…................................................................................ 61 APPENDIX E: NTCIP Protocol Compliance .......................................…............................................................... 63 16.A.21.q Packet Pg. 1060 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 5 C h a p t e r 1 1 About this manual What's in this manual This is version 1 of the user assistance provided for PD900 Series, including PD900, PD910 and PD920 cameras. The manual gives you all the information you need to operate and configure the camera. Where to find more information Find additional manuals and the latest firmware for this product at siqura.com. We advise you to make sure that you have the latest version of this manual. Who this manual is for These instructions are for all users and administrators who will operate and/or configure the PD900 Series including PD900, PD910 and PD920 cameras. What you need to know You will have a better understanding of how the camera works if you are familiar with:  Camera technologies  CCTV systems and components  Ethernet network technologies and Internet Protocol (IP)  Windows environments  Video, audio, data, and contact closure transmissions  Video compression methods Before you continue Before you continue, read and obey all instructions and notes in this manual. Keep this manual with the original bill of sale for future reference and, if necessary, warranty service. When you unpack your product, make sure there are no missing or damaged items. If any item is missing, or if you find damage, do not install or operate this product. Ask your supplier for assistance. Why specifications may change We are committed to delivering high-quality products and services. The information given in this manual was current when published. As we continuously seek to improve our products and user experience, all features and specifications are subject to change without notice. We like to hear from you! Customer satisfaction is our first priority. We welcome and value your opinion about our products and services. Should you detect errors or inaccuracies in this manual, we would be grateful if you would inform us. We invite you to offer your suggestions and comments via t.writing@siqura.com. Your feedback helps us to further improve our documentation. 16.A.21.q Packet Pg. 1061 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 6 16.A.21.q Packet Pg. 1062 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 7 h a p t e r 2 2 Product overview With the latest H.265 encoding technology, Siqura has more innovative on PD900 series for completely new outlook to refresh the our experience on PTZ dome. In PD900 series, the bubble-less mechanical is introduced for the crystal clear images without any distortion. No matter it is at night or in any low or zero lux environments, the camera provides effective illumination to objects 200 meters away. The camera features Servo Feedback technology, which enables the camera to return precisely to the previous position without stalling, and ensures the target-monitoring region is fully secured. The camera is compliant with the IP66 standard, also for outdoor installation. Combining zero downtime power switching(ZDT) technology, the camera ensures smooth streaming without sudden power-loss. 16.A.21.q Packet Pg. 1063 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 8 16.A.21.q Packet Pg. 1064 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 9 3 Web interface The built-in web interface makes it easy to operate and configure the product over the network. This chapter describes the lay-out and features of the web interface. The default web login username is Admin and the password is 1234. In This Chapter Home Page .......................................................................................................... 10 System ................................................................................................................ 13 Streaming ............................................................................................................ 39 Camera ................................................................................................................ 43 PTZ ...................................................................................................................... 48 Logout ................................................................................................................. 53 Use the horizontal menu at the top to navigate the web interface. Clicking a menu entry (i.e. a tab) opens a page:  Home  System  Streaming  Camera  PTZ  Logout Availability of a tab depends on the model at hand. Webpages have a single-page layout or content is organized across a number of categories on the left. A category contains related commands and settings. Home On the Home page, you can monitor the live video of the targeted area in the live view pane. System The administrator can set the host name, system time, root password, network related settings, etc. in the System page. Streaming The administrator can configure video format, video compression, video OCX protocol, video frame rate and audio compression parameters in the Streaming page. Camera The Camera page is only available for the administrator and users who have been given the right of camera control. The Camera page gives access to camera parameters such as Exposure, White Balance, Sharpness, IR Function, Digital Zoom and WDR. PTZ The PTZ page is only available for the administrator and users who have been given the right of camera control. The page gives access to parameters such as Preset Point(s), Cruise Line(s), Auto Pan Path(s) and Sequence Line(s). Logout Select the Logout tab to log out and log in again with another username and password. 16.A.21.q Packet Pg. 1065 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 10 3.1 Home Page Click the Home tab to open the Home page. The Home page includes a number of drop-down menus and function buttons. Sections 3.1.1 and 3.1.2 provide detailed information on these functions and buttons. Home page 3.1.1 Function items on home page Multiple Languages Support Multiple languages are supported, including German, English, Spanish, French, Italian, Japanese, Portuguese, Russian, Simplified Chinese and Traditional Chinese for the viewer window interface. Click on the drop-down menu in the top-right corner of the Home page to select a language. Display Stream Selection Depending on the streaming setting, you can choose a stream to display from the drop-down list in the top-left corner of the Home page. Camera Info Double-click the live view in the live view pane and the camera info window will pop up. The pop-up window will provide basic information on the camera, such as its IP address, network status and video format. Zoom Adjustment Click WIDE or TELE to control zooming in and out. Or select any zoom level from the zoom adjustment drop-down menu. Focus Adjustment  Near / Far Click MANUAL first. Then, adjust the focus manually with the NEAR and FAR buttons.  Auto Focus (Continuous AF) Click AUTO to enable the Auto Focus (AF) mode. In this mode, the camera will automatically and continuously keep in focus, regardless of any zoom or view changes. 16.A.21.q Packet Pg. 1066 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 11  Manual Click MANUAL to manually adjust the focus with the NEAR and FAR buttons.  Zoom (Zoom Triggered AF) Click ZOOM to activate the Auto Focus mode every time zoom is adjusted. Iris Adjustment Click CLOSE or OPEN to control the brightness of the image. Or click RESET to go back to the default value. 3.1.2 Function buttons on Home page Button Meaning Control panel (Open/Close) Control panel: Pan & tilt direction and speed control (left) Preset/Cruise/Sequence buttons (right) Video quality Full screen Talk (On/Off) Listen (On/Off) Snapshot Live view (Pause/Restart) Record (On/Off) Manual trigger (On/Off) Pointer Function buttons Control Panel Click the Control Panel button to open (arrow down) and close (arrow up) the control panel.  Pan & Tilt Direction and Speed Control The Pan & Tilt Direction Control arrows allow you to pan and tilt the camera to the desired direction. You can set a number between 1 and 10 to set the pan/tilt speed of the camera from the drop-down list on the control panel. 1 is the slowest and 10 is the fastest speed.  Run Preset / Cruise / Sequence Go to the PTZ page (see section 3.5) to set the Preset, Cruise and Sequence parameters. Then select a Preset, Cruise and Sequence line from the drop-down list and the camera will start running. Video Quality Click the Video Quality button to show or hide the bitrate and compression of each stream. 16.A.21.q Packet Pg. 1067 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 12 Full Screen Click the Full Screen button to set the image display size to full screen. Alternatively, right-click the live video pane and select Fullscreen to go full screen. To exit full screen mode:  click Esc on the keyboard, or  double-click the live video pane, or  right-click the live video pane and select Normal view. Talk The Talk function enables the local site to talk to the remote site. Click the button to switch the function on and off. Make sure to select the suitable transmission mode (Audio) on the Streaming page to enable this function. Note: This function is only available for users who have been given the right to use it by the administrator. Refer to (section 3.2.2.1) for further details. Listen Click the Listen button to mute or activate audio. Make sure to select the suitable transmission mode (Audio) on the Streaming page to enable this function. Note: This function is only available for users who have been given the right to use it by the administrator. See section 3.2.2.1 for more details. Snapshot Click the Snapshot button to automatically save JPEG snapshots to a designated place. The default storage location for snapshots is: C:\. For more details on changing the default storage location, refer to section 3.2.12. Note: With operating system Windows 7 or higher, you must run Internet Explorer as an administrator to implement the snapshot function. To do so, right-click the Internet Explorer browser icon and select Run As Administrator to launch Internet Explorer. Live View Click the Live View Pause button to disable video streaming. The live video pane will turn black. Click the Live View Restart button to show the live video again. Record Click the Record button to record the live view and store the recording to a specific location on the local hard drive. The default storage location for the live view recording is: C:\. For more details on changing the default storage location, refer to section 3.2.12. Note: With operating system Windows 7 or higher, you must run Internet Explorer as an administrator to implement the snapshot function. To do so, right-click the Internet Explorer browser icon and select Run As Administrator to launch Internet Explorer. Manual Trigger Click the Manual Trigger button to turn the manual trigger on and off. See section 3.2.8.5 for more details. Pan/Tilt Control You can implement pan/tilt control by moving the cursor to the live video pane, then left-click and drag the pan/tilt control pointer in any direction. Optical Zoom Control In Full Screen display mode, you can zoom in and out by scrolling the mouse wheel up and down. 16.A.21.q Packet Pg. 1068 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 13 Set Center Mode Right-click the live video pane and select Set Center Mode. Now you can position the area of interest in the center of the live video pane by clicking on the point of interest. To leave the Set Center Mode, right-click the live video pane again and select Set Emulated Joystick Mode. In this mode you can control the camera direction by left-clicking and dragging the pointer in the live video pane. 3.2 System Select the System tab to open the System page (see below). System page Note: The System page is only available for the administrator. 3.2.1 System Select the System category on the left to set the System parameters. Host Name The Host name is used for camera identification. If the alarm function (see section 3.2.8) is enabled and set to send alarm messages by Mail/FTP, the host name entered here will be displayed in the alarm message. Time Zone Select the appropriate time zone (i.e. the time zone that corresponds with the location of the camera) from the drop-down menu. Enable Daylight Saving Time To enable Daylight Saving Time (DST), activate the check box and then specify the time offset and the DST duration. The format for time offset is [hh:mm:ss]. For instance, if the time offset is one hour, enter “01:00:00” in the field. 16.A.21.q Packet Pg. 1069 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 14 Time format Choose a time format (yyyy/mm/dd or dd/mm/yyyy) from the drop-down menu. The date and time format displayed in the top right corner of the live video pane will be changed accordingly. Sync with Computer Time Select this option to synchronize the video date and time with the date and time of the PC. Note: You must click the Save button to confirm the setting. Otherwise, the time will not be synchronized. Manual The administrator can set the video date and time manually. The format entered should match the format shown next to the entry fields. Sync with NTP Server Select this option to synchronize the camera clock with an NTP server. specify the server that you wish to synchronize with in the entry field. Then select an update interval from the drop-down menu. For more information about NTP, go to www.ntp.org. Note: Synchronizing is done every time the camera boots up. Click the Save button to confirm the setting. 3.2.2 Security The Security category on the left gives access to the security parameters. The Security button has a drop-down menu with the following items:  User  HTTPS  IP Filter  IEEE 802.1X 3.2.2.1 User Admin Password The administrator can reset passwords. Enter the new password in the Admin password field and select Confirm password. The maximum length of a password is 14 characters. The input characters and/or numbers will be displayed as dots for security reasons. Click the Save button to confirm the changes. After the changes have been confirmed, the web browser will ask the administrator to re-login with the new password. Note: The following characters are valid: A-Z, a-z, 0-9, !#$%&’-.@^_~. Add User The administrator can add new users: 1 Enter the new user’s name in the User name field. A username can consist of up to 16 characters. 2 Enter the password in the User password field. A password can consist of up to 14 characters. 3 Check the following boxes to assign the right to:  I/O access: This allows the user to view the live video when accessing the camera.  Camera control: This allows the user to set parameters on the Camera and PTZ page.  Talk/Listen: This allows the user at the local site (PC site) to communicate with, for instance, the administrator at the remote site. 4 Click the Add button to add the new user. The name of the new user will be displayed in the User name drop-down list under Manage User. Up to twenty user accounts can be added. 16.A.21.q Packet Pg. 1070 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 15 Manage user  Delete user Pull down the User name drop-down list and select the user that you wish to delete. Click the Delete button to remove the selected name.  Edit user Pull down the User name drop-down list and select the user you wish to edit. Click the Edit button and a pop-up window will appear. In this window you can enter a new user password and reset the user rights. Click the Save button to confirm the changes. Then click the Close button to complete the editing. HTTP Authentication Setting This parameter allows secured connections between the IP camera and the web browser by enforcing access controls to web resources. When users approach the web browser, they will be asked to provide a username and a password, which protects against snooping of camera settings or live streaming information. The following security modes are available:  Basic This mode can only provide basic protection for the connection security. There will still be a risk of password interception.  Digest Digest mode is a safer option for protection. The password is sent in an encrypted format to prevent it from being stolen. Note: You must click the Save button to apply the setting. Streaming Authentication Setting This setting provides security against unauthorized users from getting streaming via the Real Time Streaming Protocol (RTSP). If the setting is enabled, users will be requested to enter a user name and password before viewing the live streams. The following security modes are available:  Disable If the disable mode is selected, there will be no security provided against unauthorized access. Users will not be asked to enter a user name and password for authentication.  Basic This mode can only provide basic protection for the live streams. There will still be the risk of password interception.  Digest Digest mode is a safer option for protection. The password is sent in an encrypted format to prevent it from being stolen. Note: You must click the Save button to apply the setting. 3.2.2.2 HTTPS HTTPS allows secure connections between the camera and the web browser using Secure Socket Layer (SSL) or Transport Layer Security (TLS), which protect camera settings or username and password information from snooping. To use HTTPS on the camera, an HTTPS certificate must be installed. The HTTPS certificate can be obtained by either creating and sending a certificate request to a Certificate Authority (CA) or by creating a self-signed HTTPS certificate, as described below. Create Self-signed Certificate Before a CA-issued certificate is obtained, you can create and install a self-signed certificate first. Click the Create button under Create self-signed certificate and provide the requested information to install a self-signed certificate for the camera. Refer to Provide the Certificate Information below for more details. Note: The self-signed certificate does not provide the same high level of security as a CA-issued certificate. 16.A.21.q Packet Pg. 1071 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 16 Install Signed Certificate Click the Create Certificate Request button to create and submit a certificate request in order to obtain a signed certificate from a CA. Provide the requested information in the create dialog. Refer to Provide the Certificate Information below for more details. When the request is complete, the subject of the Created Request will be shown in the field. Click the Properties button below the Subject field, copy the PEM-formatted request and send it to the selected CA. When the signed certificate is returned, install it by uploading the signed certificate. Provide the Certificate Information To create a Self-signed HTTPS Certificate or a Certificate Request to a CA, enter the information as requested. Create Self Signed Certificate Create Certificate Request Country V V State or province V V Locality V V Organization V V Organizational unit V V Common name V V Valid days V V  Country Enter a two-letter code to indicate the country the certificate will be used in. For instance, enter US to indicate the United States.  State or province Enter the local administrative region.  Locality Enter other geographical information.  Organization Enter the name of the organization to which the entity identified in Common Name belongs.  Organization Unit Enter the name of the organizational unit to which the entity identified in Common Name belongs.  Common Name Indicate the name of the person or other entity that the certificate identifies (often used to identify the website).  Valid days Enter the period in days (1 to 9999) to indicate the valid period of certificate. Click the OK button to save the Certificate Information after completing the setting. 3.2.2.3 Ip Filter With IP Filter, you can allow or deny specific IP addresses to access the camera.  Enable IP Filter Check the box to enable the IP Filter function. When enabled, the listed IP addresses (IPv4) in the Filtered IP Addresses list box will be allowed/denied access to the camera. Select Allow or Deny from the drop-down list and click the Apply button to define the IP filter behavior.  Add IP Address Enter an IP address in the blank space below the Filtered IP Address list and click the Add button. The newly-added address will be shown in the list. Up to 256 IP address entries can be specified. In addition, to filter a group of IP addresses, enter an address at the blank space, followed by a slash and a number ranging from 1 to 31, e.g. 192.168.2.81/30. The number after the slash denotes how many IP addresses will be filtered. For details, see the following example. 16.A.21.q Packet Pg. 1072 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 17  Example: Filtering a group of consecutive IP addresses The steps below show what will be filtered when 192.168.2.81/30 is entered. Step 1: Convert 192.168.2.81 to binary numbers. The binary numbers are 11000000.10101000.00000010.01010001. Refer to Appendix B: IP Addresses from Decimal to Binary for converting the IP addresses to binary numbers. The number 30 after the slash refers to the first 30 digits of the binary numbers. Step 2: Convert a few IP addresses before and after 192.168.2.81 to binary numbers. Then compare their first 30 digits with the binary numbers of 192.168.2.81. 1. Convert 192.168.2.80 to binary numbers. The binary numbers are 11000000.10101000.00000010.01010000. The first 30 digits are the same as the binary numbers of 192.168.2.81, thus 192.168.2.80 will be filtered. 2. Convert 192.168.2.79 to binary numbers. The binary numbers are 11000000.10101000.00000010.01001111. The first 30 digits are different from the binary numbers of 192.168.2.81, thus 192.168.2.79 will not be filtered. This also means that the IP addresses before 192.168.2.79 will not be filtered. Therefore, you can stop converting the IP addresses before 192.168.2.79 to binary numbers. 3. Repeat the procedure of (1.) with the IP addresses after 192.168.2.81. Stop when the situation in (2.) occurs. The 30th digit of the binary numbers of IP address 192.168.2.84 is different and will not be filtered. As a result, the IP addresses 192.168.2.80 to 192.168.2.83 will be filtered when entering 192.168.2.81/30. The following table clearly shows the 30th digit of the binary numbers of IP addresses 192.168.79 and 192.168.84 are different from the others. Therefore, these two IP addresses will not be filtered. IP addresses Binary numbers 192.168.2.79 11000000.10101000.00000010.01001111 192.168.2.80 11000000.10101000.00000010.01010000 192.168.2.81 11000000.10101000.00000010.01010001 192.168.2.82 11000000.10101000.00000010.01010010 192.168.2.83 11000000.10101000.00000010.01010011 192.168.2.84 11000000.10101000.00000010.01010100  Delete IP Address To remove an IP address from the Filtered IP Address list, select the address and click the Delete button. 3.2.2.4 IEEE 802.1X The camera is allowed to access a network protected by 802.1X/EAPOL (Extensible Authentication Protocol over LAN). Contact the network administrator to request for certificates, user IDs and passwords. CA Certificate The CA certificate is created by the Certification Authority for the purpose of validating itself. Upload the certificate to check the server’s identity. Client Certificate/ Private Key Upload the Client Certificate and Private Key to authenticate the camera itself. Settings  Identity Enter the user identity associated with the certificate. Up to 16 characters can be used.  Private Key Password Enter the password (maximum 16 characters) for user identity. 16.A.21.q Packet Pg. 1073 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 18 Enable IEEE 802.1X Check the box to enable IEEE 802.1X. Click the Save button to save the IEEE 802.1X/EAP-TLS setting. 3.2.3 Network The Network category on the left gives access to the network parameters. The Network button has a drop-down menu with the following items:  Basic  QoS  SNMP  UpnP  Diamond Protocol 3.2.3.1 Basic The Basic page serves to configure a new IP address for the camera, to configure other network-related parameters and to activate an IPv6 address (if the network supports it). General The General menu allows you to configure a new IP address for the camera. To set up an IP address, find out the network type first by contacting the network provider. Then refer to the network type and follow the instructions to set up the IP address. Note: If the network type is Point-to-Point Protocol over Ethernet (PPPoE), make sure to obtain the PPPoE username and password from the network provider.  Get IP address automatically (DHCP): Select this item and click the Save button. A note will appear indicating that the camera system will restart. Click the OK button and the camera system will be restarted. A new IP address will be assigned to the camera. Close the web browser and search the camera using the Siqura Device Manager tool, which can be downloaded at https://siqura.com. Refer to the steps below to connect the camera with the SDM2 software. Note: Before searching the camera with the SDM2 tool, record the camera’s MAC address, which can be found on the label or on the package container of the camera, for later use and identification in the future. 1 Run the SDM2 program. 2 After the SDM2 window has appeared, click the Edit and Manual Scan for Devices menu option to manually search for the camera based on the IP address, if known. All the found IP devices will be listed on the page automatically if the Device auto detection is enabled. 3 Find the camera by looking for its IP address. 4 Double-click or right-click and select Open device web page to access the camera through the web browser (IE Browser or Chrome recommended). 5 A prompt window requesting for a username and password will appear. Enter the username and the password to log in on the camera (default login username: Admin, password: 1234).  Use fixed IP address: Select this item and enter the new IP address, e.g. 192.168.7.123. Note that the entered IP address should be in the same LAN as the PC’s IP address. Then go to the Default gateway (explained later) blank and change the setting, e.g. 192.168.7.254. Click the Save button to confirm the new setting. A note will be displayed indicating that the system will be restarted. Click the OK button and the system will restart. Wait for 15 seconds. The camera’s IP address in the URL bar will be changed, and users have to log in again. If a static IP address is used to connect the camera, you can access the camera by entering the IP address in the URL bar and pressing Enter on the keyboard. Alternatively, you can access the camera using the Siqura Device Manager tool, which can be downloaded at https://siqura.com. Refer to the steps below to connect the camera using the SDM2 software and its static IP address. 16.A.21.q Packet Pg. 1074 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 19 1 Run the SDM2 program. 2 After the SDM2 window has appeared, click the Edit and Manual Scan for Devices menu option to manually search for the camera based on the IP address, if known. All the found IP devices will be listed on the page automatically if the Device auto detection is enabled. 3 Find the camera by looking for its IP address. 4 Double-click or right-click and select Open device web page to access the camera through the web browser. 5 A prompt window requesting for a username and password will appear. Enter the username and the password to log in on the camera (default login username: Admin, password: 1234). Configure the camera Networks settings:  IP address This is necessary for network identification.  Subnet mask This configures the address destination is in the same subnet. The default value is “255.255.255.0”.  Default gateway Denotes the gateway used to forward frames to destinations in a different subnet. An invalid gateway setting will cause the transmission to destinations in a different subnet to fail.  Primary DNS Denotes the primary domain name server that translates hostnames into IP addresses.  Secondary DNS Denotes a secondary domain name server that backs up the primary DNS.  Use PPPoE For the PPPoE users, enter the PPPoE username and password in the relevant entry fields and click the Save button to complete the setting. Advanced Below follows a description of the camera’s Web Server port, RTSP port, MJPEG over HTTP port and HTTPS port.  Web Server port The default web server port is 80. With the default web server port 80, you can simply enter the IP address of the camera in the URL bar of a web browser to connect the camera. If the web server port is changed to a port number other than 80, you have to enter the camera’s IP address followed by a colon and the port number. For instance, a camera with IP address 192.168.0.100 and web server port 8080 can be connected by entering http://192.168.0.100:8080 in the URL bar.  RTSP port The default setting of RTSP port is 554. the RTSP port should be set to 554 or a value in the range of 1024 to 65535.  MJPEG over HTTP port The default setting of MJPEG over HTTP port is 8008. The MJPEG over HTTP port should be set to 8008 or a value in the range of 1024 to 65535.  HTTPS port The default setting of HTTPS port is 443. The HTTPS port should be set to 443 or a value in the range of 1024 to 65535. Note: Make sure the port numbers set above are not the same; otherwise a network conflict may occur. IPv6 Address Configuration If the network supports IPv6, you can activate the Enable IPv6 checkbox and click the Save button. An IPv6 address will appear beside Address, and you can use it to connect to the camera. 3.2.3.2 QoS QoS allows for providing differentiated service levels for different types of traffic packets, which guarantees delivery of priority services, especially in the event of network congestion. By adapting the Differentiated Services (DiffServ) model, traffic flows are classified and marked with DSCP (DiffServ Codepoint) values, and will receive the corresponding forwarding treatment from DiffServ capable routers. 16.A.21.q Packet Pg. 1075 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 20 DSCP Settings The DSCP value lies in the range of 0 to 63. The default DSCP value is 0, which means DSCP is disabled. The camera uses the following QoS Classes:  VideoDSCP The class consists of applications such as MJPEG over HTTP, RTP/RTSP and RTSP/HTTP.  AudioDSCP This setting is only available for cameras that support audio.  ManagementDSCP The class consists of HTTP traffic: web browsing. Note: To enable this function, make sure the switches/routers in the network support QoS. 3.2.3.3 SNMP With Simple Network Management Protocol (SNMP) support, the camera can be monitored and managed remotely by the network management system. SNMP v1/ v2  Enable SNMPv1/ v2 Select the SNMP version to use by checking the relevant box.  Read Community Specify the community name that has read-only access to all supported SNMP objects. The default value is “public”.  Write Community Specify the community name that has read/write access to all supported SNMP objects (except read-only objects). The default value is “private”. Note: To enable the NTCIP Protocol function, make sure the SNMPv1 and SNMPv2 functions are enabled. Also, configure the Read and Write Community names to match the configured NTCIP settings of the VMS. SNMP v3 SNMP v3 supports an enhanced security system that provides protection against unauthorized users and ensures the privacy of the messages. You will be requested to enter a security name, authentication password and encryption password while setting the camera connections in the network management system. With SNMP v3, the messages sent between the cameras and the network management system will be encrypted to ensure privacy.  Enable SNMPv3 Activate the Enable SNMP checkbox.  Security Name The maximum length of the security name is 32 characters. Note: Valid characters are A-Z, a-z, 0-9and!#$%&’-.@^_~.  Authentication Type There are two authentication types available: MD5 and SHA. Select SHA for a higher security level.  Authentication Password The minimum length of the authentication password is 8 characters. The entered characters and/or numbers will be displayed as dots for security reasons. Note: Valid characters are A-Z, a-z, 0-9and!#$%&’-.@^_~.  Encryption Type There are two encryption types available: DES and AES. Select AES for a higher security level.  Encryption Password The minimum length of the encryption password is 8 characters and the maximum length is 512 characters. The entered characters and/or numbers will be displayed as dots for security reasons. The encryption password can also be left blank. However, the messages will not be encrypted to protect privacy. Note: Valid characters are A-Z, a-z, 0-9and!#$%&’-.@^_~. 16.A.21.q Packet Pg. 1076 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 21 Traps for SNMP v1/ v2/ v3 Traps are used by the camera to send massages to a management system for important events or status changes.  Enable Traps Check the box to activate trap reporting.  Trap address Enter the IP address of the management server.  Trap community Enter the community to use when sending a trap message to the management system. Trap Option  Warm Start A Warm Start SNMP trap signifies that the SNMP device, i.e. IP camera, performs a software reload. Click the Save button to confirm the settings. 3.2.3.4 UpnP UPnP Setting  Enable UPnP If UPnP is enabled and whenever the camera is presented to the LAN, the icons of the connected cameras will appear in My Network Places to allow for direct access. Note: To enable this function, make sure the UPnP component is installed on the computer. Refer to Appendix A: Install UPnP Components for the UPnP component installation procedure.  Enable UPnP port forwarding If UPnP port forwarding is enabled, the camera is allowed to automatically open the web server port on the router. Note: To enable this function, make sure that the router supports UPnP and that it is activated.  Friendly name Enter a name for the camera for identity. Click the Save button to confirm the settings. 3.2.3.5 Diamond Protocol To enable the Diamond protocol via IP communication, select the transport option, TCP or UDP, and configure the corresponding listening port number, to which the PTZ commands will be sent to the camera. Before doing so, make sure that Diamond Protocol is selected in the PTZ > RS485 pane. - Enable PTZ commands over TCP: Enables Diamond commands via TCP. o Listening on Port: Port number used to send the PTZ commands via TCP. - Enable PTZ commands over UDP: Enables Diamond command via UDP. o Listening on Port: Port number used to send the PTZ commands via UDP. To enable Diamond protocol via serial RS485, PTZ commands over TCP and UDP should be disabled. 3.2.4 DDNS The DDNS category on the left gives access to the DDNS parameters. Dynamic Domain Name System (DDNS) allows a hostname to be constantly synchronized with a dynamic IP address. In other words, it allows those using a dynamic IP address to be associated with a static domain name so others can connect to it by name. Enable DDNS Check the box to enable DDNS. 16.A.21.q Packet Pg. 1077 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 22 Provider Select a DDNS host from the provider list. Host name Enter the registered domain name in the field. Username/E-Mail Enter the username or E-mail required by the DDNS provider for authentication. Password/Key Enter the password or key required by the DDNS provider for authentication. 3.2.5 Mail The Mail category on the left gives access to the Mail parameters. The administrator can send an E-mail via Simple Mail Transfer Protocol (SMTP) when an alarm is triggered. SMTP is a protocol for sending E-mail messages between servers. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified and the message text is transferred. Two sets of SMTP can be configured. Parameters include SMTP Server, Account Name, Password and E-mail Address. Contact the network service provider for more specific information about the SMTP server. 3.2.6 FTP The FTP category on the left gives access to the FTP parameters. The administrator can configure the camera to send the alarm messages to a specific File Transfer Protocol (FTP) site when an alarm is triggered. Alarm messages can be assigned to up to two FTP sites. Enter the FTP details, including server, server port, username, password and remote folder, in the relevant fields. Click the Save button to confirm the settings. 3.2.7 HTTP The HTTP category on the left gives access to the HTTP parameters. An HTTP Notification server can listen for the notification messages from the cameras by triggered events. Enter the HTTP details, including the server name (for instance, http://192.168.0.1/admin.php), username and password, in the relevant fields. Alarm triggered and Motion Detection notifications can be sent to the specified HTTP server. Click the Save button. Note: Refer to Send HTTP notification for HTTP Notification in section 3.2.8.1. 3.2.8 Events (Alarm Settings) The Event category on the left gives access to the Event parameters. When clicking the Event button, a drop-down menu will appear with the following items:  Application  Motion Detection  Network Failure Detection  Periodical Event  Manual Trigger  Audio Detection 3.2.8.1 Application The camera has four alarm inputs and two relay outputs for connection with the alarm system to catch event images. Refer to the user manual or quick guide for the alarm I/O pin definitions to connect the alarm devices. 16.A.21.q Packet Pg. 1078 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 23 Alarm Switch Select the alarm pin to be configured from the drop-down menu. The default setting for the Alarm Switch function is Off. Select On to enable the function. You can also activate the function in accordance with the schedule previously set in the Schedule setting pane. Select By schedule and click the Please select… button to choose the desired schedule from the drop-down menu. Alarm Type Select the alarm type, i.e. Normal close or Normal open, that corresponds with the alarm application. Triggered Action (Multi-option) The administrator can specify alarm actions to be taken in the event of an alarm. The following options are available:  Enable Alarm Output 1/2 Select these option to enable alarm relay outputs.  Send Message by FTP/E-Mail Select this option to send an alarm message by FTP and/or E-mail when an alarm is triggered.  Upload Image by FTP Select this option to assign an FTP site and configure various parameters. When the alarm is triggered, event images will be uploaded to the assigned FTP site. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what caused the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the alarm input has been triggered. Note: The pre-trigger buffer generally ranges from 1 to 20 frames. However, the range will change accordingly if the frame rate of MJPEG on the Streaming page (Video Configuration) is 6 or smaller. Check the box Continue image upload to upload the triggered images during a certain period of time or continue uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) in the blank space. The images of the duration will be uploaded to FTP when the alarm input is triggered. Select Upload while the trigger is active to continue uploading images to FTP during the trigger active until the alarm is released. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure FTP configuration has been completed. See section 3.2.6 for more details.  Upload Image by E-Mail Select this option to assign an E-mail address and configure various parameters. When the alarm is triggered, event images will be sent to the assigned E-mail address. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what caused the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the alarm input has been triggered. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the box Continue image upload to upload the triggered images during a certain period of time or keep uploading until the trigger is off. Select Upload for __sec and enter the duration in the blank space (1 sec. to 99999 sec.). The images of the duration will be uploaded and sent via E-mail when the alarm input is triggered. Select Upload while the trigger is active to continue uploading images via E-mail during the trigger active until the alarm is released. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure SMTP configuration has been completed. See section 3.2.5 for more details.  Send HTTP Notification Check this option, select the destination HTTP address and specify the parameters for event notifications by “Alarm” triggered. When an alarm is triggered, the notification can be sent to the specified HTTP server. 16.A.21.q Packet Pg. 1079 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD910 Page 24 For instance, if the custom parameter is set to “action=1&group=2”, and the HTTP server name is “http://192.168.0.1/admin.php”, the notification will be sent to the HTTP server as “http://192.168.0.1/admin.php? action=1&group=2” when an alarm is triggered.  Record Video Clip Check this option and select a video recording storage type; SD Card or NAS (Network-Attached Storage). The alarm-triggered recording will be saved to the SD card or the NAS. The pre-trigger buffer recording function allows you to check what happened to cause the trigger. The pre-trigger buffer time range is from 1 sec. to 3 sec. Select Upload for __ sec to set the recording duration (1 sec. to 99999 sec.) after an alarm is triggered. Select Upload while the trigger is active to record the triggered video until the trigger is off. Note: Make sure that local recording (with SD card) or remote recording (with NAS) is activated so that this function can be implemented. See section 3.2.10 for more details.  PTZ Function Assign a camera function: Preset, Sequence, Autopan or Cruise, and specify a Function Line for the camera to perform when an alarm is triggered. Note: See sections 3.5.1 to 3.5.4 for more details on Preset Point, Cruise Line, Autopan Path and Sequence Line set-ups. If the selected function is Preset, you need to enter the dwell time (1 sec. to 256 sec.) in the corresponding field. When the alarm is triggered, the camera will go to the selected Preset Point and stay there for a user-defined period of time. As for other function modes, the camera will keep executing the specified function; to stop it, simply change the camera’s status. Note: The dwell time is only adjustable when Preset is selected. When the dwell time is up, the camera will go back to its trigger position and recheck the alarm pin status. File Name Enter a file name in the File name field, e.g. image.jpg, and select the desired file name format of the uploaded image:  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum value) File name: imageXXXXXXX.jpg X: Sequence Number  Add sequence number suffix up to # and then start over File Name: imageXX.jpg X: Sequence Number The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will start from 00, end at 10, and then start all over again.  Overwrite The original image at the FTP site will be overwritten by the newly uploaded file with a static filename. Save Click the Save button to confirm the settings. 3.2.8.2 Motion detection The Motion Detection function allows the camera to detect suspicious motion and trigger alarms by comparing sampling pixels in the detection area of two consecutive live images. When the motion volume in the detected area reaches or exceeds the set sensitivity threshold value, the alarm will be triggered. The function supports up to 4 sets of Motion Detection settings. Settings can be chosen from the Motion Detection drop-down menu. 16.A.21.q Packet Pg. 1080 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 25 Motion Detection By default, the Motion Detection function for each Motion Detection setting is set to Off. Select On to enable Motion Detection. You can also activate the function in accordance with the schedule previously set in the Schedule setting pane (see section 3.2.11). Select By schedule and click the Please select… button to choose the desired schedule from the drop-down menu. Motion Region Setup (Motion Region Paint) The camera divides the detection area into 1200 (40x30) detection grids. You can draw the motion detection region using the paintbrush. Check the Enable brush box and select the brush size: 1x1, 3x3 or 5x5. Then, left-click and drag the mouse cursor to draw the preferred detection region. To erase the drawn detection region, left-click and drag the mouse cursor on the colored grids. Drawing a motion detection region Motion Detection Setting You can adjust various Motion Detection parameters in this section.  Sampling pixel interval [1-10] This item is used to examine the differences between two frames. You can configure the interval of sampling pixel. The default value is 1. For instance, if you set the interval to 3, the IP camera system will take one sampling pixel from every 3 pixels of each row and each column in the detection area (see the figure below). The alarm will be triggered when differences are detected.  Detection level [1-100] You can configure the detection level for each sampling pixel. The detection level indicates up to what level the camera will accept the differences between two sampling pixels. The smaller the value, the more minor motions it detects. The default level is 10.  Sensitivity level [1-100] The default level is 80, which means that if 20% or more sampling pixels are detected to be different, the camera will detect motion. The higher the value, the more sensitive it is and the lower the red horizontal line in the motion indication window. 16.A.21.q Packet Pg. 1081 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 26  Time interval (sec) [0-7200] Denotes the interval between each detected motion. The default interval is 10. Motion Indication Bar When the Motion Detection function is activated and motion is detected, the signals will be displayed on the motion indication bar. The motion indication bar will turn green or red when motion is detected in the detection region. Green indicates that motion is detected, but the motion does not exceed the threshold of the detection level and sensitivity level. No alarms will be triggered. Red indicates that the motion detected exceeds the threshold of the detection level and the sensitivity level. The alarm will be triggered. Triggered Action (Multi-option) You can specify alarm actions to be taken when motion is detected. Available options are:  Enable Alarm Output ½ (high/low) Check this item and select the predefined type of alarm output to enable alarm relay output when motion is detected.  Send Alarm Message by FTP/E-Mail Select this item to send an alarm message by FTP and/or E-mail when motion is detected.  Upload Image by FTP Select this item to assign an FTP site and configure various parameters. When motion is detected, event images will be uploaded to the assigned FTP site. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what caused the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the motion event has occurred. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the Continue image upload box to upload the triggered images during a certain period of time or keep uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) in the blank space. The triggered images will be uploaded to FTP when the motion event occurs. Select Upload during the trigger active to continue uploading the images to FTP during the trigger active until the event stops. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure FTP configuration has been completed. See section 3.2.6 for more details.  Upload Image by E-Mail Select this option to assign an E-mail address and configure various parameters. When the alarm is triggered, event images will be sent to the assigned E-mail address. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what caused the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the alarm input has been triggered. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the box Continue image upload to upload the triggered images during a certain period of time or keep uploading until the trigger is off. Select Upload for __sec and enter the duration in the blank space (1 sec. to 99999 sec.). The images of the duration will be uploaded and sent via E-mail when the alarm input is triggered. Select Upload while the trigger is active to continue uploading images via E-mail during the trigger active until 16.A.21.q Packet Pg. 1082 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 27 the alarm is released. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure SMTP configuration has been completed. See section 3.2.5 for more details.  Send HTTP Notification Check this option, select the destination HTTP address and specify the parameters for event notifications by “Alarm” triggered. When an alarm is triggered, the notification can be sent to the specified HTTP server. For instance, if the custom parameter is set to “action=1&group=2”, and the HTTP server name is “http://192.168.0.1/admin.php”, the notification will be sent to the HTTP server as “http://192.168.0.1/admin.php? action=1&group=2” when an alarm is triggered.  Record Video Clip Check this option and select a video recording storage type; SD Card or NAS (Network-Attached Storage). The alarm-triggered recording will be saved to the SD card or the NAS. The pre-trigger buffer recording function allows you to check what happened to cause the trigger. The pre-trigger buffer time range is from 1 sec. to 3 sec. Select Upload for __ sec to set the recording duration (1 sec. to 99999 sec.) after an alarm is triggered. Select Upload while the trigger is active to record the triggered video until the trigger is off. Note: Make sure that local recording (with SD card) or remote recording (with NAS) is activated so that this function can be implemented. See section 3.2.10 for more details. File Name Enter a file name in the File name field, e.g. image.jpg, and select the desired file name format of the uploaded image:  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum value) File name: imageXXXXXXX.jpg X: Sequence Number  Add sequence number suffix up to # and then start over File Name: imageXX.jpg X: Sequence Number The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will start from 00, end at 10, and then start all over again.  Overwrite The original image at the FTP site will be overwritten by the newly uploaded file with a static filename. Save Click the Save button to confirm the settings. 3.2.8.3 Network failure detection Network Failure Detection allows the camera to periodically ping another IP device (e.g. NVR, VSS, Video Server) in the network and generates some actions in case a network failure occurs, for instance, a Video Server is somehow disconnected. Since the camera is capable of implementing local recording (through SD card) or remote recording (via NAS) when a network failure occurs, it can serve as a back-up recording device for the surveillance system. Detection Switch The default setting for the Detection Switch function is Off. Select On to enable the function. You can also activate the function in accordance with the schedule time previously set in the Schedule settings page. Select By schedule and click the Please select… button to choose the desired schedule from the drop-down menu. 16.A.21.q Packet Pg. 1083 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 28 Detection Type Enter the IP device address and the period of the ping. The camera will ping the IP device every N minute(s). If it fails up to three times, the alarm will be triggered automatically. Set a value between 1 and 99 (minutes). Triggered Action (Multi-option) You can specify alarm actions to be taken when a network failure is detected. Available options are:  Enable Alarm Output 1 /2 Select this option to enable alarm relay output.  Send Alarm Message by FTP/E-Mail Select this option to send an alarm message by FTP and/or E-mail when an alarm is triggered.  Record Video Clip Check the option and select a video recording storage type: SD Card or NAS (Network-Attached Storage). The alarm-triggered recording will be saved to the SD card. Pre-trigger buffer recording function allows you to check what happened to cause the trigger. The pre-trigger buffer time range is from 1 sec. to 3 sec. Select Upload for __ sec to set the recording duration (1 sec. to 99999 sec.) after the alarm is triggered. Select Upload during the trigger active to record the triggered video until the trigger is off. Note: Make sure that local recording (with SD card) or remote recording (with NAS) is activated so that this function can be implemented. See section 3.2.10 for more details. Save Click the Save button to confirm the settings. 3.2.8.4 Periodical event The Periodical Event settings serve to configure the camera to upload images periodically to an FTP site or an E-mail address. For example, if the time interval is set to 60 seconds, the camera will upload images to the FTP site or the E-mail address every 60 seconds. The images to be uploaded are the images before and after the triggered moment. You can define the number of images to be uploaded in the Triggered Action section. Periodical Event The default setting for the Periodical Event function is Off. Select On to enable the function. Time Interval The default value of the time interval is 60 seconds. You can set a value between 60 and 3600 seconds. Triggered Action  Upload Image by FTP Select this option to assign an FTP site and configure various parameters. Images will be uploaded periodically to the assigned FTP site. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function defines the number of images to be uploaded before the triggered moment. The Post-trigger buffer function defines the number of images to be uploaded after the triggered moment. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if he frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Note: Make sure that FTP configuration has been completed. See section 3.2.6 for more details.  Upload Image by E-Mail Select this option to assign an E-mail address and configure various parameters. Images will be uploaded periodically to the assigned E-mail address. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function defines the number of images to be uploaded before the triggered moment. The Post-trigger buffer function defines the number of images to be uploaded after the triggered moment. 16.A.21.q Packet Pg. 1084 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 29 Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Note: Make sure SMTP configuration has been completed. See section 3.2.5 for more details. File Name Enter a file name in the File name field, e.g. image.jpg, and select the desired file name format of the uploaded image:  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum value) File name: imageXXXXXXX.jpg X: Sequence Number  Add sequence number suffix up to # and then start over File Name: imageXX.jpg X: Sequence Number The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will start from 00, end at 10, and then start all over again.  Overwrite The original image in the FTP site will be overwritten by the newly uploaded file with a static filename. Save Click the Save button to confirm all settings. 3.2.8.5 Manual Trigger With the Manual Trigger settings, the current image(s) or video can be uploaded to the assigned destination, such as an FTP site or an E-mail address. You can specify the triggered actions to be taken when the Manual Trigger button is switched to On. Below follows a description of the available options. Manual Trigger The default setting for the Manual Trigger function is Off. Select On to enable the function. After the Manual Trigger function has been enabled, click the Manual Trigger button on the Home page to start uploading data. Click again to stop uploading. Triggered Action (Multi-option) The administrator can specify alarm actions to be taken when an alarm occurs. Available options are:  Enable Alarm Output 1/2 Select these options to enable alarm relay outputs.  Send Message by FTP/E-Mail Select this option to send an alarm message by FTP and/or E-mail when an alarm is triggered.  Upload Image by FTP Select this option to assign an FTP site and configure various parameters. When the alarm is triggered, event images will be uploaded to the assigned FTP site. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what happened to cause the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the alarm input is triggered. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the Continue image upload box to upload the triggered images during a certain period of time or keep uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) in the 16.A.21.q Packet Pg. 1085 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 30 blank space. The images of the duration will be uploaded to FTP when the alarm input is triggered. Select Upload during the trigger active to continue uploading the image to FTP during the trigger active until the alarm is released. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure that FTP configuration has been completed. See section 3.2.6 for more details.  Upload Image by E-Mail Select this option to assign an E-mail address and configure various parameters. When the alarm is triggered, event images will be sent to the assigned E-mail address. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what happened to cause the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after alarm input is triggered. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the Continue image upload box to upload the triggered images during a certain period of time or keep uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) in the blank space. The images of the duration will be uploaded via E-mail when the alarm input is triggered. Select Upload during the trigger active to continue uploading the via E-mail during the trigger active until the alarm is released. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure that SMTP configuration has been completed. See section 3.2.5 for more details.  PTZ Function Assign a camera function (Preset, Sequence, Autopan or Cruise) and specify a Preset Point / Sequence Line / Autopan Path / Cruise Line for the camera to perform when an alarm occurs. Note: See sections 3.5.1 to 3.5.4 for more details on Preset Point, Cruise Line, Autopan Path and Sequence Line set-ups. If the selected function is Preset, you need to enter the dwell time (1 sec. to 256 sec.) in the corresponding field. When the alarm is triggered, the camera will go to the selected Preset Point and stay there for a user-defined period of time. As for other function modes, the camera will keep executing the specified function. To stop it, simply change the camera’s status. Note: The dwell time is only adjustable when Preset is selected. When the dwell time is up, the camera will go back to its trigger position and recheck the alarm pin status.  Send HTTP notification Check this option, select the destination HTTP address and specify the parameters for event notifications by “Alarm” triggered. When an alarm is triggered, the notification can be sent to the specified HTTP server. For instance, if the custom parameter is set as “action=1&group=2”, and the HTTP server name is “http://192.168.0.1/admin.php”, the notification will be sent to the HTTP server as “http://192.168.0.1/admin.php? action=1&group=2” when an alarm is triggered.  Record Video Clip Check this option and select a video recording storage type: SD Card or NAS (Network-Attached Storage). The alarm-triggered recording will be saved to the SD card or the NAS. The Pre-trigger buffer recording function allows you to check what happened to cause the trigger. The pre-trigger buffer time range is from 1 sec. to 3 sec. Select Upload for __ sec to set the recording duration (1 sec. to 99999 sec.) after an alarm is triggered. Select Upload during the trigger active to record the triggered video until the trigger is off. Note: Make sure that local recording (with SD / SDHC card) or remote recording (with NAS) is activated so that this function can be implemented. See section 3.2.10 for more details. File Name Enter a file name in the File name field, e.g. image.jpg, and select the desired file name format of the uploaded image: 16.A.21.q Packet Pg. 1086 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 31  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum value) File name: imageXXXXXXX.jpg X: Sequence Number  Add sequence number suffix up to# and then start over File Name: imageXX.jpg X: Sequence Number The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will start from 00, end at 10, and then start all over again.  Overwrite The original image in the FTP site will be overwritten by the newly uploaded file with a static filename. Save Click the Save button to confirm all settings. 3.2.8.6 Audio Detection The Audio Detection function allows the camera to detect audio and trigger alarms when audio volume in the detected area reaches or exceeds the determined sensitivity threshold value. Note: The Audio Detection function is only available for models equipped with the Audio I/O function. Audio Detection The default setting for the Audio Detection function is Off. Select On to enable the function. Audio Detection Setting In this section, you can adjust Audio Detection parameters.  Detection level [1-100]: Denotes the detection level for each sampling volume. The smaller the value, the more sensitive it is. The default level is 10.  Time interval (sec) [0-7200]: Denotes the interval between each detected audio. The default interval is 10. Triggered Action (Multi-option) The administrator can specify alarm actions to be taken when audio is detected. Available options are:  Enable Alarm Output 1/2 Select these options to enable alarm relay outputs.  Send Alarm Message by FTP/E-Mail Select this option to send an alarm message by FTP and/or E-mail when audio is detected.  Upload Image by FTP Select this option to assign an FTP site and configure various parameters. When audio is detected, event images will be uploaded to the assigned FTP site. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what happened to cause the trigger. The Pre-trigger buffer frame rate can be pre-determined. ThePost-trigger buffer serves to upload a certain amount of images after an audio event has occurred. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the Continue image upload box to upload the triggered images during a certain period of time or continue uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) 16.A.21.q Packet Pg. 1087 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 32 in the blank space. The images of the duration will be uploaded to FTP when the audio event occurs. Select Upload during the trigger active to continue uploading images to FTP during the trigger active until the event stops. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure FTP configuration has been completed. See section 3.2.6 for more details.  Upload Image by E-Mail Select this option to assign an E-mail address and configure various parameters. When audio is detected, event images will be sent to the assigned E-mail address. Note that to implement this function, one of the streams must be set as MJPEG; otherwise, this function will be grayed out and cannot be accessed. The Pre-trigger buffer function allows you to check what happened to cause the trigger. The Pre-trigger buffer frame rate can be pre-determined. The Post-trigger buffer serves to upload a certain amount of images after the audio event has occurred. Note: The Pre-trigger buffer generally ranges from 1 to 20 frames. However, if the frame rate of MJPEG on the Streaming page (Video Configuration) is set to 6 or smaller, the range will change accordingly. Check the Continue image upload box to upload the triggered images during a certain period of time or continue uploading until the trigger is off. Select Upload for __sec and enter the duration (1 sec. to 99999 sec.) in the blank space. The images of the duration will be uploaded via E-mail when the audio event occurs. Select Upload during the trigger active to continue uploading the images via E-mail during the trigger active until the event stops. Set the Image frequency as the upload frame rate. Enter a value between 1 and 15 (frames per second). Note: Make sure SMTP configuration has been completed. See section 3.2.5 for more details.  Send HTTP Notification Check this option, select the destination HTTP address and specify the parameters for event notifications by Audio Detection triggered. When an alarm is triggered, the notification can be sent to the specified HTTP server. For instance, if the custom parameter is set as “action=1&group=2”, and the HTTP server name is “http://192.168.0.1/admin.php”, the notification will be sent to the HTTP server as “http://192.168.0.1/admin.php? action=1&group=2” when an alarm is triggered.  Record Video Clip Check this item and select a video recording storage type: SD Card or NAS (Network-Attached Storage). The Audio Detection recording will be stored on SD card or the NAS when audio is detected. The Pre-trigger buffer recording function allows you to check what happened to cause the trigger. The pre-trigger buffer time range is from 1 sec. to 3 sec. Select Upload for __ sec to set the recording duration (1 sec. to 99999 sec.) after audio is triggered. Select Upload during the trigger active to record the triggered video until the trigger is off. Note: Make sure that local recording (with SD card) or remote recording (with NAS) is activated so that this function can be implemented. See section 3.2.10 for more details. File Name Enter a file name in the File name field, e.g. image.jpg, and select the desired file name format of the uploaded image:  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum value) File name: imageXXXXXXX.jpg X: Sequence Number  Add sequence number suffix up to# and then start over FileName: imageXX.jpg X: Sequence Number The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will start from 00, end at 10, and then start all over again. 16.A.21.q Packet Pg. 1088 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 33  Overwrite The original image in the FTP site will be overwritten by the newly uploaded file with a static filename. Save Click the Save button to confirm all Audio Detection settings. 3.2.9 Storage Management The Storage management category on the left gives access to the Storage management parameters. The Storage management button has a drop-down menu with the following items:  SD Card  Network Share 3.2.9.1 SD Card You can store local recordings of up to 128 GB to the SD card. This page shows the capacity information of the SD card and a recording list with all the recording files saved to the memory card. You can also format the SD card and implement automatic recording clean up on this page. To implement SD card recording, go to the Recording page (refer to section 3.2.10) for activation. Note: Format the SD card when you use it for the first time. Formatting will also be required when a memory card is being used on one camera and later transferred to another camera with a different software platform. Note: It is not recommended to continuously (24/7) record with the SD card, as it may not be able to support long term continuous data read/write. Contact the manufacturer of the SD card for information about the card’s reliability and life expectancy. Device Information When you insert the SD card, the card information such as the memory capacity and status will be shown in the Device Information section. Recording Source Select a video stream to set as the recording source. The default format of the video stream is H.264-1. Select a preferred stream from the drop-down list. Click the Save button to confirm the settings. Device Setting Click the Format button to format the memory card. Two file systems are provided, vfat (default) and ext4 (recommended). It is recommended to select ext4 as the file system of the memory card for steady and better performance. Disk Clean-up Setting Check Enable automatic disk cleanup and specify the time 1~999 day(s) or 1~142 week(s) and storage limits 1~99% full to configure disk cleanup settings. Click the Save button to confirm the settings. Recording List Each video file on the SD card will be listed in the Recording list. The maximum file size is 60 MB/per file. When the recording mode is set to Always (consecutive recording) and SD card recording is also allowed to be enabled by events triggered, once events occur, the camera will immediately implement event recording to the memory card. After recording of the events, the camera will return to the regular recording mode.  Remove To remove a file, select the file first, and then click the Remove button. 16.A.21.q Packet Pg. 1089 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 34  Sort Click the Sort button, and the files in the Recording list will be listed in name and date order. The capital letter A / M / N / R / V / U at the beginning of the name denotes the type of recording (see below). Initial Recording type Initial Recording type A Alarm R Regular recording M Motion V Manual trigger N Network failure U Audio detection  Download To open/download a video clip, select the file first, and then click the Download button below the Recording list field. The selected file window will pop up. Click the AVI file to immediately play the video in the player or download it to a specific location. 3.2.9.2 Network Share (NAS) You can store the recording videos to a network shared-folder or to the NAS (Network-Attached Storage). A NAS device is used for data storage and data sharing via the network. This page displays the capacity information of the network device and a recording list with all the recording files saved to the network device. You can also format the NAS and implement automatic recording cleanup on this page. Device information If a NAS is successfully installed, the device information such as the memory capacity and status will be shown in this section. Storage setting You can set the camera to send the alarm messages to a specific NAS site when an alarm is triggered. Enter the network device details, including the host (the IP of the NAS), share (the folder name of the NAS), username and password, in the relevant fields. Click the Save button to confirm the settings. Storage Tools Click the Format button to format the NAS. Recording Source Select a video stream as the recording source. The default format of the video stream is Stream 1. Select the desired stream from the drop-down list. Click the Save button to confirm the selection. Disk clean-up setting Check Enable automatic disk cleanup and specify the time 1~99 day(s) or 1~142 week(s) and storage limits 1~99% full. Click the Save button to confirm the settings. Recording List Each video file on the Network Share will be listed in the Recording list. The maximum file size is 60 MB per file. When the recording mode is set to Always (consecutive recording) and the NAS recording is also allowed to be enabled by events triggered, once events occur, the camera will immediately implement event recording to the memory card. After recording of the events, the camera will return to the regular recording mode.  Remove To remove a file, select the file first, and then click the Remove button. 16.A.21.q Packet Pg. 1090 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 35  Sort Click the Sort button, and the files in the Recording list will be listed in name and date order. The capital letter A/M/N / R/ V/ U at the beginning of name denotes the sort of recording as below. Initial Recording type Initial Recording type A Alarm R Regular recording M Motion V Manual trigger N Network failure U Audio detection  Download To open/download a video clip, select the file first, and then click the Download button below the Recording list field. The selected file window will pop up. Click the AVI file to directly play the video in the player or download it to a specific location. 3.2.10 Recording The Recording category on the left gives access to the Recording parameters. In the Recording pane, you can specify the recording schedule that fits the surveillance requirement. Recording pane Recording Storage Select a recording storage type: SD Card or Network Share. Enable Recording Schedule Two schedule modes are available: Always and Only during time frame.  Select Always to activate SD Card or Network Share Recording all the time.  Select Only during time frame and select a schedule set from the time frame blank, check specific week days and set the start time (hour:minute) and time period (hour:minute) to activate recording at certain time frames. The duration time range is from 00:00 to 168:59. Click the Save button to confirm the settings. 16.A.21.q Packet Pg. 1091 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 36 To delete a schedule, select it from the list and click the Delete button. Disable Recording Schedule Select Disable to terminate the recording function. Click the Save button to confirm the selection. 3.2.11 Schedule The schedule category on the left gives access to the Schedule parameters. This schedule function allows you to set up schedules for features including Alarm Switch, Motion Detection and Network Failure Detection. The function supports up to 10 sets of time frames in the time frame list. Schedule pane Setting Schedules 1 Select a time frame from the time frame list. 2 Check the weekday boxes of the desired weekdays. 3 Select a time mode: Day, Night or Time. For the Time mode, specify the start time (hour:minute) and the time duration (hour:minute) to activate the schedule-triggered features. The time duration range is from 00:00 to 168:59. 4 (Optionally) Click the Delete button to delete a chosen period. 5 Click the Save button to save the settings. Time Mode  Day The camera profile will be loaded when IR cut filter is on.  Night The camera profile will be loaded when IR cut filter is off.  Time Denotes the start time and the time duration for the schedule. 16.A.21.q Packet Pg. 1092 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 37 Note: You must select By schedule in the parameter setting page of each feature to enable the schedule function. 3.2.12 File Location (Snapshots and Web Recording) The File Location category on the left gives access to the file location parameters. You can specify a storage location on the PC or the hard drive for the snapshots and the live video recordings. The default location is: C:\. After you have specified the location, click the Save button. All the snapshots and the web recordings will be saved to the designated location. Note: Make sure the selected file path contains valid characters such as letters and numbers. Note: With operating system Windows 7 or higher, you must run Internet Explorer as an administrator to implement the snapshot and web recording function. To do so, right-click the Internet Explorer browser icon and select Run As Administrator to launch Internet Explorer. 3.2.13 View Information The View Information category on the left gives access to the view information parameters. The View Information button has a drop-down menu with the following items:  Log File  User Information  Parameter. 3.2.13.1 Log File Click the Log File tab to view the system log file. The camera keeps a record of the system’s behavior and information related to the camera. These log data can be exported for future use. Click the Generate syslog button. The Save File As dialog window will pop up. The default file name is named after the model name and the MAC address as “Model Name-MAC-log.tgz”. Select the file destination and click the Save button to export the log data. Note: The Save File As dialog window may not show up immediately for the camera needs some time to process the log data. 3.2.13.2 User Information Click this item to view the login information and rights of each user (See section 3.2.2). User: 1:1:0:1 1:1:0:1= I/O access:Camera control:Talk:Listen (see section 3.2.2.1) “1”denotes that the user has access to the function; whereas “0” indicates that no access for this user is allowed. 3.2.13.3 Parameters Click this item to view the parameter settings of the entire camera system, such as Camera Settings, Mask Information and Network Information. 3.2.14 Factory Default Follow the instructions on this page to reset the camera to the factory default settings, if needed. Full Restore Click the Full Restore button to recall the factory default settings. The camera system will restart in 30 seconds. The IP address will be restored to default. After the camera system has been restarted, reconnect the camera using the default IP address. The default IP address is 192.168.0.250. 16.A.21.q Packet Pg. 1093 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 38 Partial Restore Click the Partial Restore button to recall the factory default settings (excluding network settings). The camera system will restart in 30 seconds. Refresh the browser page after the camera system has been restarted. Note: The IP address will not be restored to default. Reboot Click the Reboot button and the camera system will restart without changing the current settings. Refresh the browser page after the camera system has been restarted. Hardware Reset To perform a hardware reset to the factory default settings, press the Default button (see picture) while the camera is on and hold the button during 20 seconds. Once the camera starts spinning around, release the button and wait for the camera to boot before reconnecting. Note: You will need to use the default IP address and login credentials to reconnect to the camera, once the hardware reset and booting process has been completed. 3.2.15 Software Version The software version page displays the current software version and the pan/tilt/zoom mcu version. 3.2.16 Software Upgrade Note: Make sure that the upgrade software file is available before performing a software upgrade. For an easier upgrade process, use the SDM2 tool available for download at https://siqura.com. To perform a software upgrade: 1 Click the Browse button and locate the upgrade file, for example, “ulmage_userland”. Note: Do not change the name of the upgrade file, or the system will fail to find the file. 2 Select a file type from the drop-down list. In this case, select ulmage+userland.img. 3 Click the Upgrade button. The system will prepare to start the software upgrade, after which an upgrade status bar will be displayed to show the upgrade process. After the upgrade process has been completed, the viewer will return to the Home page. 4 Close the video browser. 5 Click the Windows Start button and activate the Control Panel. 6 In the Control Panel window, double-click the Add or Remove Programs button. A window with the currently installed programs will pop up. Select Siqura Viewer in the list and click the Remove button to uninstall the existing Viewer. 7 Open a web browser and re-login to the camera. You will be prompted to download the Siqura Viewer. After the Siqura Viewer has been downloaded and installed, the live video will be available. 3.2.17 Maintenance You can export configuration files to a specific location and retrieve data by uploading the configuration file to the camera. 16.A.21.q Packet Pg. 1094 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 39 Export Files You can save the system settings by exporting a configuration file (.bin) to a specific location for future use. Click the Export button. The File Download window will pop up. Click the Save button and specify a location for saving the configuration file. Upload Files To upload a configuration file to the camera, click the Browse button to select the configuration file and then click the Upload button. 3.3 Streaming The Streaming page includes the following categories on the left:  Video Configuration  Video Rotation  Video Tekst Overlay  Video OCX Protocol  Audio Streaming page On the Streaming page, you can configure parameters such as the video resolution, video compression mode, video protocol and the audio transmission mode. Note: The Streaming page can only be accessed by the administrator. 16.A.21.q Packet Pg. 1095 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 40 3.3.1 Video Configuration (Video Format & Resolution) The Video Configuration category on the left gives access to the video configuration parameters. Encoding Select Yes from the drop-down menu to enable Stream 2~Stream 4 encoding. Or select No to disable the streaming encoding. Encode Type Available video resolution formats include H.265, H.264 and MJPEG. You can select the preferred encode type from the drop-down menu. Resolution Video format and resolution combinations will vary depending on the user configuration. The table below lists the default resolution of different camera models. Megapixels IP camera models Default resolution 4M Linear mode (50/60 fps) H.265/H.264-2688x 1512(30/25fps) + H.265/H.264-800 x 600 (30/25fps) HDR Mode (WDR 2 shutter) 3M Linear mode (50/60 fps) H.265/H.264-2048 x 1536 (30/25fps) + H.265/H.264- 800 x 600 (30/25 fps) HDR mode (WDR 2 shutter) 2M Linear mode (50/60 fps) H.265/H.264-1920x 1080(30/25fps)+ H.265/H.264-1920 x 1080(30/25 fps) HDR mode (WDR 2 shutter) Rate Control There are three kinds of H.265/H.264 bit rate modes: CBR (Constant Bit Rate), VBR (Variable Bit Rate) and LBR (Low Bit Rate).  CBR The sent out video bitrate will be fixed and consistent to maintain the bandwidth.  VBR The video bitrate varies depending on the activity of the monitoring environment to achieve better image quality.  LBR LBR keeps the bitrate low and ensures superior image quality. To implement LBR control, set up the compression level and dynamic GOV for each streaming beforehand.  Compression Based on the current application area and streaming bitrate, select the most suitable compression level: high, mid or low. If you set the level to High, the bitrate will be reduced considerably. However, the image quality may be degraded at the same time. If you set the level to Low, the bitrate will be kept low while the image quality remains high.  Dynamic GOV Depending on the amount of motion in the application area, the GOV length of the video will be adjusted dynamically to reduce more bitrate, especially for scenes with minor changes. The length of Dynamic GOV ranges from GOV Length to Max. GOV (4094). Select Enabled and set Max. GOV. Then, click the Save button. If there is little or zero activity in the scene, set Max. GOV larger. The GOV length will be longer, resulting in a lower bitrate and bandwidth. If there are constant dynamic changes in the scene, it is recommended to just adjust GOV Length and disable Dynamic GOV. Click the Save button to confirm the settings. 16.A.21.q Packet Pg. 1096 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 41 Profile You can set H.265/H.264 Profile to High Profile or Main Profile, depending on the compression needs. With the same bit rate, the higher the compression ratio, the better the image quality. The default setting is Main Profile. Note: Make sure the higher compression ratio is supported by the system before setup. Framerate The framerate parameter serves to set the frames per second (fps), if necessary. The default setting of Stream 1 is 30 fps (NTSC) or 25 fps (PAL). The maximum framerate range of each stream will vary depending on the selected video resolution. Note: A low framerate will decrease the video smoothness. Bitrate The default value of the H.265/H.264 bitrate for Stream 1/Stream 2 is 4096kbit/s; for Stream 3/Stream 4 it is 2048 kbit/s. Enter a value between 512 and 10240 kbps. The total bit rate should not exceed 26624 kbps. GOV Length You can set the GOV length to determine the frame structure (I-frames and P-frames) in a video stream to save bandwidth. Less bandwidth is needed if the GOV length is set to a high value. However, the shorter the GOV length, the better the video quality. The default value for Stream 1/Stream 2 is 50; for Stream 3/Stream 4 this is 30. Enter a value between 1 and 255. Q (Quality) Factor (MJPEG Only) The default value of MJPEG Q factor is 35. Enter a value between 1 and 70. Click the Save button to confirm the entry or click the Reset button to return to the previous values. 3.3.2 Video Rotation Rotate Function This parameter enables you to change the video display type. Available video rotation types include Mirror and 90/180/270 degree clockwise rotation:  Mirror Select Yes from the drop-down menu to flip the image horizontally.  Rotate Type Select 0, 90, 180 or 270 degrees from the drop-down menu to rotate the image accordingly. Click the Save button to confirm the selections. 3.3.3 Video Text Overlay Overlay Type You can select up to three items out of the first four items below to be displayed on the live video pane.  Include date & time Check the box to enable date & time display on the live video pane. You can select the options date, time, or date & time from the drop-down menu and select the string align position (left or right).  Include text string Check the box to enable text string display on the live video pane. Type the text to be displayed in the entry field and select the string align position (left or right). The maximum length of the text string is 15 alphanumeric characters.  Include subtitle Check the box to enable subtitle display on the live video pane. Type the text to be displayed in the entry field and select the string align position (left or right). You can configure up to three subtitles. The maximum length of each subtitle is 54 alphanumeric characters. 16.A.21.q Packet Pg. 1097 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 42  Include Image Check the box to enable image display on the live video pane. Select the alignment position (left or right) for the image from the drop-down list.  Include azimuth Check the box to enable azimuth display on the live video pane and set the azimuth alignment position. Azimuth shows the pan/tilt degree and the shooting position of the camera, such as NE 050/00 (“NE” is the shooting position of the camera; “050” is the pan degree; “00” is the tilt degree.) After you have selected an overlay type item, a video text overlay window will appear. Move the mouse cursor to the center of the window, click and drag the window to change the display position. Then, click the Set button to confirm the settings. Text Overlay Setting You can choose the Text Overlay Color (black, white, yellow, red, green, blue, cyan or magenta) and the Text Overlay Size (small, medium or large) of the date&time, textstring or subtitle display. Click the Set button to confirm the settings. Image Overlay Setting You can upload an image and set its transparency for display on the live video pane. The setting range of image transparency is from 0 to 255. The lower the value, the more transparent the image will be. Save the image as an 8-bit BMP file. The length should be a multiple of 32, and the width should be a multiple of 4. The maximum resolution of the image should not exceed 32768 pixels. Click the Set button and the Upload button to confirm the settings. 3.3.4 Video OCX Protocol The Video OCX Protocol category on the left gives access to the following video OCX protocol parameters:  RTP over UDP, RTP over RTSP(TCP), RTSP over http or MJPEG over http, for streaming media over the network.  Multicast Mode. Enter the required data (Multicast IP address, Multicast H.264-1 / H.264-2 / H.264-3 / H.264-4 Video Port, Multicast MJPEG Video Port, Multicast Audio Port and Multicast TTL) in the relevant fields. Click the Save button to confirm the settings. 3.3.5 Audio (Audio Mode and Bit Rate Settings) The Audio category on the left gives access to the Audio parameters. You can adjust the sound transmission mode, the audio gain levels and the audio bit rate, and enable sound recording to the SD card. Transmission Mode  Full-duplex (Talk and Listen simultaneously) In the full-duplex mode, the local and remote sites can communicate with each other simultaneously, i.e. both sites can speak and listen to the other side at the same time.  Half-duplex (Talk or Listen, not at the same time) In the half-duplex mode, the local and remote site can only talk or listen to the other site one at a time.  Simplex (Talk only) In the talk-only simplex mode, the local and remote site can only talk to the other site.  Simplex (Listen only) In the listen-only simplex mode, the local and remote site can only listen to the other site.  Disable Select Disable to turn off the audio transmission function. Server Gain Setting Set the audio input/output gain levels for the sound amplification. The audio input gain value is adjustable from 1 to 10. The audio output gain value is adjustable from 1 to 6. To turn off the sound, set the audio gain to Mute. 16.A.21.q Packet Pg. 1098 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 43 Bit Rate Selectable audio transmission bit rates include 16 kbps, 24 kbps, 32 kbps, 40 kbps, uLAW (64kbps), ALAW (64kbps), AAC (128 kbps), PCM (128 kbps), PCM (256 kbps), PCM (384 kbps) and PCM (768 kbps). Higher bit rates will offer a higher audio quality and require bigger bandwidth. Click the Save button to confirm the selection. Recording to Storage Select Enable from the drop-down menu to enable storage of audio recording with videos to the SD card or the NAS. Note: If the chosen bit rate is not compatible with the player, there will be noise instead of audio during playback. Click the Save button to confirm the setting. 3.4 Camera The Camera page includes the following categories on the left:  Exposure  White Balance  Picture Adjustment  IR Function  Noise Reduction  WDR Function  Image Stabilizer  Digital Zoom  Backlight  Profile  TV System Camera page 16.A.21.q Packet Pg. 1099 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 44 3.4.1 Exposure In the Exposure page, you can select the Full Auto mode or adjust the parameter of the P-Iris Priority, Iris Priority and Shutter Priority mode for optimized video output in accordance with the operating environment. Auto Mode  Max Gain This parameter serves to set the maximum gain. The Max Gain ranges from 1 to 3. Select Off to disable the function. The default value is 3. Note: A higher max. gain may cause more image noises.  Auto Iris In this mode, the camera will automatically adjust the iris to suit the environment illumination. The minimum shutter speed can be set from 1/30 to 1 sec. (NTSC) or 1/25 to 1/1.5 sec. (PAL). AGC (Auto Gain Control) will function automatically, depending on the light conditions of the object.  P-Iris Priority Mode (Recommended)  Iris Size Setting When you select Auto Detect, the camera will automatically detect the best iris size for the environment. Alternatively, you can manually adjust the iris size by selecting Manual. Click the plus and minus buttons to adjust the iris size.  Minimum Shutter Speed The minimum shutter speed can be set from 1/30 to 1 sec. (NTSC) or 1/25 to 1/1.5 sec. (PAL).  Iris Priority Mode In this mode, the iris has priority in controlling the exposure. The value of iris is adjustable from 0 to 10 (Full Open=10). The minimum shutter speed range is configurable from 1/30 to 1 sec. (NTSC) or 1/25 to 1/1.5 sec. (PAL).  Auto Shutter Mode In this mode, the camera will automatically adjust the shutter speed and the iris size, depending on the light intensity. The minimum shutter speed can be set from 1/500 to 1 sec. (NTSC) or 1/425 to 1/1.5 sec. (PAL).  Shutter Priority Mode In this mode, the shutter speed has priority in controlling the exposure. The range of the shutter speed is from 1/500 sec. to 1/30 sec. (NTSC) or 1/425 sec. to 1/25 sec. (PAL). Manual Mode In this mode, you can manually change the Shutter Speed, Iris Size, and Gain. The shutter speed range is from 1/10000 sec. to 1 sec. (NTSC) or from 1/10000 sec. to 1/1.5 sec. (PAL). The range of the iris size is from 0 to 10 (Full Open=10). The gain value range is from 1dB to 9dB. Select Off to disable the function. 3.4.2 White Balance A camera needs to have a reference color temperature, which is a way of measuring the quality of a light source for calculating all the other colors. The unit for measuring this ratio is in degrees Kelvin (K). You can select one of the White Balance Control modes depending on the operating environment. The table below shows the color temperature of some light sources for reference. Light sources Color temperature in K Cloudy sky 6,000 to 8,000 Noon sun and clear sky 6,500 Household lighting 2,500 to 3,000 75-watt bulb 2,820 Candle light 1,200 to 1,500 Auto Mode The Auto Balance White mode is suitable for environments with a light source having a color temperature in the range of roughly 2700K to 7500K. 16.A.21.q Packet Pg. 1100 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 45 ATW Mode (Auto Tracing White Balance) With the Auto Tracking White Balance function, the white balance in a scene will automatically be adjusted when the temperature color changes. The ATW Mode is suitable for environments with a light source having a color temperature in the range of roughly 2500K to 10000K. One Push With the One Push function, white balance is adjusted and fixed depending on the scene the camera sees at the moment. This function is suitable for light sources with any kind of color temperature and situations with minimal scene changes and continuous lighting. Follow these steps to set the white balance: 1 Point the camera to the monitoring area. 2 Select One Push in the White Balance setting menu. 3 Click the Trigger button to adjust the white balance. Note: In this mode, the value of white balance will not change when the scene or the light source changes. You might have to re-adjust the white balance by clicking the Trigger button again when needed. Manual Mode In this mode, you can adjust the white balance manually by specifying the R gain and B gain. The range of R/B gain is from 0 to 127. The following image displays the general color shifts of the scene when different Rgain / Bgain combinations are applied. Changing white balance in manual mode Click the check box to confirm the setting. 3.4.3 Picture Adjustment Brightness The brightness level of the images can be set to a value between -12 and +13. 16.A.21.q Packet Pg. 1101 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 46 Sharpness The sharpness level of the images can be set to a value between +0 and +15. The edge of the objects is enhanced as the sharpness level increases. Contrast The contrast level of the images can be set to a value between -6 and +19. Saturation The saturation level of the images can be set to a value between -6 to and +19. Hue The hue level of the images can be set to a value between -12 and +13. 3.4.4 IR Function Day/Night Function This item serves to define the modes for the IR cut filter and IR LED lights.  Auto Mode In this mode, the camera will determine the occasion to remove the IR cut filter.  Night Mode Select this mode when the environment light level is low. The IR cut filter will be removed to enable the camera to deliver clear images in black and white.  Day Mode Select this mode to turn on the IR cut filter. The IR cut filter can filter out the IR light and enables the camera to deliver high quality images in color.  Light Sensor Mode IR LED lights will be turned on/off depending on the light sensor.  Light On Mode In this mode, IR LED lights will always be on.  Light Off Mode In this mode, IR LED lights will always be off.  Smart Mode In Smart mode, the camera will determine the occasion to remove the IR cut filter. The Smart mode mechanism can judge whether the main light source is from IR illumination. If the main light source is from IR illumination, the IR cut filter will be kept open (i.e. monochrome/night mode). Day/Night Threshold This item enables you to define when the camera should switch from day mode to night mode or vice versa. The camera will sense the surrounding brightness, and the threshold value represents the light level. If the camera detects that the light level has reached the threshold, it will automatically switch to Day/Night Mode. The level range is from 0 to 10 (darker = 0; brighter = 10).  Night Mode to Day Mode The lower the value, the earlier the camera switches to Day mode. The default value is 7.  Day Mode to Night Mode The higher the value, the earlier the camera switches to Night mode. The default value is 3. Note: This function is only available if the camera is in Auto Mode. IR Light Compensation With the IR Light Compensation function, the camera can prevent the center object close to the camera from being too bright when IR LED lights are turned on. 16.A.21.q Packet Pg. 1102 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 47 3.4.5 Noise Reduction The camera provides multiple Noise Reduction options for delivering optimized image quality, especially in extra low light conditions. 3DNR With the 3D Noise Reduction function, the processor analyzes the differences between successive frames to adjust pixels and improve image quality. 3DNR generates better de-noising effects than 2DNR, but might create motion blur on moving objects in the field of view. Different levels of 3DNR are provided, including Low, Mid and High. A higher level of 3DNR generates relatively enhanced noise reduction. 2DNR With the 2D Noise Reduction function, the processor analyzes individual frames of video to eliminate environmental noise signals so that the highest quality image can be produced even in low light conditions. Select On to turn on the 2DNR function. Select Off to turn off the 2DNR function. ColorNR In a dark environment or an environment with insufficient light and if the camera is in color mode, ColorNR (Color Noise Reduction) can eliminate color noise. Three levels of ColorNR, including Low, Mid and High, are provided. A higher level of ColorNR generates relatively enhanced noise reduction. 3.4.6 WDR Function The Wide Dynamic Range (WDR) function serves to solve high contrast or changing light issues to allow for enhanced video display. Level options for the WDR function include Low, Mid and Hi. The higher the level, the wider the dynamic range. In this way, the camera can catch a greater scale of brightness. 3.4.7 Digital Zoom Select On to enable the Digital Zoom function. Select Off to turn the function off. 3.4.8 Backlight The Backlight function is available when the video format is set to 60fps or 50fps under TV System (see section 3.4.11). Backlight Compensation prevents the center object from being too dark in surroundings where excessive light is behind the center object. Select On to enable the Backlight function. Select Off to turn the function off. 3.4.9 Image Stabilizer The Image Stabilizer function is only available when the video format is set as “WDR 2 Shutter” under TV System (see section 3.4.11). With the Image Stabilizer function, the camera can keep the image steady and suppress vibrating effects on images caused by external vibration. Follow these steps to activate the function: IR Heating With the IR Heating function, the IR LED will be turned on to heat up the camera under 14 degree Celsisus. IR heating and IR function work independently. 16.A.21.q Packet Pg. 1103 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 48 Note: The Digital Zoom function and the Privacy Mask-Zoom Factor function will be disabled when the Image Stabilizer function is activated. 3.4.10 Profile The Camera Profile function allows you to configure the desired image parameters for specific environments with different time schedules. You can configure up to ten sets of camera parameters in the Camera tab. To enable this function, you must set up the schedules in advance. See section 3.2.11 for more details. Then, follow the steps below to set up a camera profile. Camera Profile Setup 1 In the Camera tab, set the camera parameters, such as Exposure, White Balance, etc., excluding TV System. 2 Click Profile and the corresponding menu will be displayed. Select a number from the Num drop-down list. 3 Enter a name for the profile in the Name field. 4 Click the Save button below the Name field. The camera configuration is saved and applied to the profile. 5 Select a saved camera profile from the Num drop-down list. 6 Check the By schedule box. Check the desired schedule(s) from the Schedule drop-down list. Multiple schedules can be applied to one profile. 7 Click the Save button. 8 Repeat the above steps for the rest of the profiles. Now, the camera will automatically switch profiles depending on the schedule. Alternatively, you can manually select a number from the Num drop-down list. Click the Load button and the camera will apply the profile setting. Note: If you wish to set the camera parameters to the factory default, select Normal from the Num drop-down list. The camera will start loading the default values. 3.4.11 TV System Select the video format that matches the present TV system. The table below shows the available video formats of the Network IR PTZ Camera. Video format NTSC 60 fps (Recommended) WDR 2 shutter PAL 50 fps (Recommended) WDR 2 shutter 3.5 PTZ The PTZ page includes the following categories on the left:  Preset  Cruise  Auto Pan  Sequence  Home Function  Tilt Range  Privacy Mask  PTZ Setting  RS485 1 Select On from the Stabilizer drop-down list to enable the Image Stabilizer function. 2 Select On from the Auto Calibration drop-down list to activate the Auto calibration function. 3 Alternatively, you can click the Calibrate button for manual calibration. Be sure to keep the camera stand still for 3 seconds for calibration accuracy. To disable the Image Stabilizer function, select Off from the Stabilizer drop-down list. Note: Do NOT use PTZ functions when activating manual calibration. 16.A.21.q Packet Pg. 1104 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 49 PTZ page 3.5.1 Preset The camera supports up to 256 Preset Points. Preset Setting Follow these steps to set up a Preset Point: 1 Move the cursor to the live view pane. 2 Left-click and drag the red pointer with the PTZ controls to the desired position and adjust the fine zoom / focus ratio. 3 Assign a number for the current position from the drop-down Number List (click the PrePage or NextPage button to go to number 1 to 256) and enter the descriptive name. 4 Click the Set button to save the settings. Preset Go To have the camera move to a specific preset position, select the Preset Point from the drop-down Preset list (click the PrePage or NextPage button to go to preset number 1 to 256). The camera will move to the target position. 3.5.2 Cruise The camera supports up to eight Cruise Paths. Cruise Setting Follow these steps to set up a Cruise Path: 1 Select a path number from the drop-down list. 2 Move the cursor to the live view pane and move the camera to the desired view (PTZ controls) as the start point of a Cruise Path. 3 Click the Set button of Record Start and start configuring the Cruise Path via the PTZ controls. 4 After programming, click the Set button of Record End to complete recording the Cruise Path. 16.A.21.q Packet Pg. 1105 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 50 Cruise Run Select the programmed Cruise Path from the drop-down list and click the Run button. The camera will start touring around as recorded. To view the camera touring in full screen mode, move the cursor to the live view pane, right-click and left-click to select Fullscreen. You can now view the camera navigation in full screen. To stop running a Cruise Path, simply move the cursor to the live view pane and move the camera in any direction. 3.5.3 Auto Pan The camera supports four Auto Pan Paths. Auto Pan Setting Follow these steps to set up an Auto Pan Path: 1 Select a path number from the drop-down list. 2 Select the speed ratio from the Speed drop-down list. The speed ratio ranges from 0 (low) to 3 (fast). 3 Choose to run the Auto Pan Path in the right or left direction from the Direction drop-down list. 4 Move the cursor to the live view pane and move the camera to the desired view as the Start Point for the Auto Pan Path. 5 Click the Set button of Start Point. The current view will be automatically saved as the start point for the Auto Pan Path. 6 Move the camera to another position as the end point of the Auto Pan Path. 7 Click the Set button of End Point to save the setting. Note: The zoom ratio of an Auto Pan’s Start Point remains the same throughout the path. Auto Pan Run Select the configured Auto Pan Path from the drop-down list and click the Run button. The camera will start moving horizontally as recorded. To view the camera panning in full screen mode, move the cursor to the live view pane, right-click and select Fullscreen. You can now view the camera navigation in full screen. To stop running an Auto Pan Path, simply move the cursor to the live view pane and move the camera in any direction. 3.5.4 Sequence The camera supports a total of 8 Sequence Lines. Each Sequence Line consists of up to 64 Preset Points. Note: Before setting this function, you must pre-define at least two Preset Points. Sequence Setting Click the Edit button of Sequence Setting to open the Sequence setting menu.  Sequence Line Select the number of the Sequence Line to be set from the drop-down list at the top of the Sequence setting menu.  Sequential Preset Points Setting Set the Preset Points of the configured Sequence Line one after the other. Select a Preset Point from the Name list for the specified number of the Preset Point and enter the Dwell Time (0 to 127) and the Speed (0 to 14) in the corresponding fields. After setting the sequential Preset Points, click the Save button in the Sequence setting menu. 16.A.21.q Packet Pg. 1106 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 51 Sequence Run Select the configured Sequence Line from the drop-down list and click the Go button. The camera will start moving forward each scene sequentially as programmed. To view the camera executing a Sequence Line in full screen mode, move the cursor to the live view pane, right-click and left-click to select Fullscreen. You can now view the camera navigation in full screen. To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera in any direction. 3.5.5 Home Function You may set an operation mode to ensure constant monitoring. If the camera idles for a period of time, the selected function will be activated automatically. This is the Home function. The Home function allows constant and accurate monitoring to prevent the camera from idling or missing events. Home Setting  Switch Select On or Off to activate or de-activate the Home function. Then click the Set button to apply the setting.  Time The time represents the camera idle time previous to running a Preset Point / Cruise Line / Auto Pan Path / Sequence Line. When the Home function is activated, the camera will start to count down when idle, and will execute the predefined action as the time expires. The time ranges from 1 min. to 128 min. Specify the time and Click the Set button to save the settings.  Type & Line Select a Home action type (Preset Point / Cruise Line / Auto PanPath / Sequence Line) and select the number of the Preset Point / Cruise Line / Auto Pan Path / Sequence Line from the drop-down Type and Line lists. Click the Set button to save the Home settings. 3.5.6 Tilt Range The camera’s tilt angle is adjustable from a minimum of −20° to a maximum of +100°. Enter the desired minimum and maximum tilt angle in the relevant fields. Click the Set button to save the tilt angle settings. 3.5.7 Privacy Mask The Privacy Mask function serves to avoid any intrusive monitoring. When setting a mask, it is recommended to set it twice as large (height and width) as the masked object. The camera will assume the center of the selected view as the starting point. Therefore, keep the target object or region positioned near the center of the scene. Mask Setting  Switch Select On or Off to activate or de-activate the Privacy Mask function. Click the Set button to apply the setting.  Color Select a color from the Color drop-down list for the programmed Privacy Mask. Click the Set button to apply the setting.  Mask Number (1~20) Enter the number of the programmed Privacy Mask in the entry field.  Zoom Factor Normally, a privacy mask is repositioned and resized to cover the masked area whenever the camera is panned/tilted/zoomed. The Zoom Factor allows you to hide the mask when the zoom ratio is set lower than the original ratio. For example, when the privacy mask is set at a certain zoom ratio (e.g. 5x), the privacy mask will be resized when the camera is zoomed in (e.g. from 5x to 20x). However, when the camera zooms out (e.g. from 5x to 2x), the privacy mask will be hidden. Select On or Off to activate or de-activate the Zoom Factor function. Follow the steps below to set up a privacy mask. 16.A.21.q Packet Pg. 1107 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 52 1 Set Switch to On and click the Set button to activate the Privacy Mask function. 2 Select a color for the mask from the Color drop-down list and click the Set button to apply the color setting. 3 Enter the mask number, e.g. 17. If a Zoom Factor is needed, select On to enable it. Then, click the Add button and a privacy mask will be displayed on the live video pane on the right. 4 To shift the mask to the desired location, move the mouse cursor to the center of the mask and click and drag. 5 To change the shape and the size of the mask, click any edge of the mask and draw it outward/inward. 6 If needed, set Zoom, Focus and Iris. 7 Click the Set button to confirm the setting. The Privacy Mask will be displayed in the color set above. If you wish to edit the previously set mask, enter the Mask number in the Mask (1~20) entry field and click the Edit button. The camera will go to the set location and display the mask. Then, follow steps 4 to 6 to edit the mask. To cancel mask editing, just click the Return button. Mask Clearing In this section, you can delete an existing Privacy Mask. Select the Privacy Mask to be removed from the drop-down list, and click the Clear button. The selected Privacy Mask will be removed without warning. 16.A.21.q Packet Pg. 1108 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Web interface Page 53 3.5.8 PTZ Setting Flip You can continuously track an object when it passes under the camera by setting Flip to Mechanical (M.E.) mode. Note: The Flip setting can only be controlled manually. If a Preset Position or a point for another function (e.g. Sequence) is set at a position that can only be reached by FLIP motion, and the Flip function is turned off, the position cannot be reached anymore. Note: To make the camera tilt between a specific range, such as -20° to +100°, go to the Tilt Range setting page to set the tilt angle range. Otherwise, the camera will use 90° as the default tilt value.  M.E. Mode M.E. is a standard mechanical operation. As the camera tilts to the maximum angle, it will pan 180° and continue tilting to keep tracking objects. Speed by Zoom This function allows the camera to adjust the pan/tilt speed automatically by the internal algorithm when the zoom ratio is changed. The rotating speed will become slower as the zoom ratio gets larger. Click the Set button to activate the function. Auto Calibration (Servo Feedback) Integrating Servo Feedback technology, the camera will calibrate and precisely return to the previous position without stalling when deviation of the dome pivot is detected. Select On and click the Set button to activate Auto Calibration. Set Pan Zero Click the Set button to set the camera’s current shooting position as the start point for panning (0 degrees). 3.5.9 RS485 The RS485 page serves to activate the pan/tilt function and select the RS-485 protocol used by the Joystick/Keyboard. RS-485 Protocol Type With the correct RS-485 protocol selected, you can remotely control the PTZ function of the camera using a Joystick/Keyboard. Check the RS-485 protocol type of the Joystick/Keyboard. Then select the RS-485 protocol used by the Joystick/Keyboard from the drop-down list. The available protocols are DSCP, PelcoD, PelcoP and Diamond. After the protocol type has been selected, adjust the parameters from the drop-down lists on the right. Click the Save button to confirm the settings. 3.6 Logout Select the Logout tab at the top of the page to open the Login window. This window enables you to log in with another username. 16.A.21.q Packet Pg. 1109 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 54 16.A.21.q Packet Pg. 1110 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 55 C h a p t e r 3 Appendix A: Install UpnP Components Follow these instructions to install UPnP components on Windows Vista, Windows XP or Windows 7: 1 Open the Window s Control Panel and double-click Add or Remove Programs. 2 Click Add/Remove Windows Components in the Add or Remove Programs window. 3 Select Networking Services from the Components list in the Windows Components Wizard window and then click Details. 4 Select UPnP User Interface in the Networking Services’ subcomponents list and then click OK. 5 Click Next in the Windows Components Wizard window. 6 Click Finish to complete the installation. 16.A.21.q Packet Pg. 1111 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 56 16.A.21.q Packet Pg. 1112 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 57 C h a p t e r 4 Appendix B: Addresses from decimal to binary Follow the example below to convert IP addresses to binary numbers. Use the calculator on your computer (Start> All Programs> Accessories> Calculator) for conversion.  For Windows XP and Windows Vista, click View on the calculator and click Scientific.  For Windows 7 or above, click View on the calculator and click Programmer. Then follow the steps in the following example to convert the IP addresses. The example below shows how to convert 192.168.2.81 to binary numbers. 1 On the left of the calculator, select Dec. Then enter the first decimal number of the IP address, “192”. Select Bin and the number will be converted to a binary number. Repeat the same procedure for the rest of the decimal numbers. Remember to select Dec before entering the next decimal number. If you don’t, a decimal number cannot be entered. The table below shows the binary number of each decimal number. Decimal numbers Binary numbers 192 11000000 168 10101000 2 10 81 1010001 2 Each binary number should have eight digits. If a binary number does not have eight digits, add one or more 0’s in front of it until it does. The binary number of each decimal number should be as follows. Decimal numbers Binary numbers 192 11000000 168 10101000 2 00000010 81 01010001 The binary numbers of IP address 192.168.2.81 are therefore 11000000.10101000.00000010.01010001. 16.A.21.q Packet Pg. 1113 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 58 16.A.21.q Packet Pg. 1114 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 59 C h a p t e r 5 Appendix C: JPG Picture Pull Authentication Follow these instructions to enable/disable the required authentication for the JPG pictures pull function: Configure one of the video stream to MJPEG in the camera and then use the Google Chrome browser to enter the below API command to enable or disable the required JPG picture pull authentication:  API Command to Enable Required Authentication: http://username:password@ip_address/cgi-bin/admin/param.cgi?action=update&Network.Authentication.Sna pshot=enable  Sample API command to Pull JPG picture with enabled authentication: http://username:password@ip_address/video.jpg  API Command to Disable Required Authentication: http://username:password@ip_address/cgi-bin/admin/param.cgi?action=update&Network.Authentication.Sna pshot=disable  Sample API command to Pull JPG picture with disabled authentication: http://ip_address/video.jpg 16.A.21.q Packet Pg. 1115 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 60 16.A.21.q Packet Pg. 1116 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Page 61 C h a p t e r 6 Appendix D: RTSP Video Streams URL Use the following command to establish an RTSP video stream connection to each of the available video transmissions in the PD900 Series camera: rtsp://ip_address:port_number/streamx, where x corresponds to each stream channel 1 to 4.  Example: Video stream 1 rtsp://10.1.55.180:554/stream1  Example: Video stream 2 rtsp://10.1.55.180:554/stream2  Example: Video stream 3 rtsp://10.1.55.180:554/stream3  Example: Video stream 4 rtsp://10.1.55.180:554/stream4 16.A.21.q Packet Pg. 1117 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series Page 62 16.A.21.q Packet Pg. 1118 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Appendix E: NTCIP Protocol Compliance The National Transportation Communications for ITS Protocol (NTCIP) provides a communications standard that ensures the interoperability and interchangeability of traffic control and Intelligent Transportation Systems (ITS) devices. This appendix provides information about the conformance groups which are supported by the PD9x0 series cameras. In This Chapter Supported conformance groups ........................................... 63 SNMP MIB ......................................................................... 64 Supported conformance groups The PD9x0 series cameras firmware supports all the mandatory parts and some of the optional parts (see table below) of the NTCIP CCTV specification as laid down in the NTCIP 1205:2001 v01.08 document. This means that - in terms of section 4 of this document - the following conformance groups are supported. Conformance group Reference Conformance requirement Configuration NTCIP 1201:1996 mandatory CCTV Configuration NTCIP 1205 mandatory Motion Control NTCIP 1205 optional Conformance statement table Configuration Most of the Configuration conformance group objects listed below contain static device information.  Global Set ID parameter  Maximum modules parameter  Module table  Module number  Module device node  Module make  Module model  Model version  Module type  Base standards parameter Page 63 16.A.21.q Packet Pg. 1119 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) PD900 Series CCTV configuration The CCTV Configuration conformance group consist of objects that specify the configuration parameters of a CCTV. For details, refer to NTCIP 1205. Conformance requirement within the group is mandatory.  rangeMaximumPreset  rangePanLeftLimit  rangePanRightLimit  rangePanHomePosition  trueNorthOffset  rangeTiltUpLimit  rangeTiltDownLimit  rangeZoomLimit  rangeFocusLimit  rangeIrisLimit  rangeMinimumPanStepAngle  rangeMinimumTiltStepAngle  timeoutPan  timeoutTilt  timeoutZoom  timeoutFocus  timeoutIris  labelTable ▪ labelEntry ▪ labelIndex ▪ labelText ▪ labelFontType ▪ labelHeight ▪ labelColor ▪ labelStartRow ▪ labelStartColumn ▪ labelStatus ▪ labelLocationLabel ▪ labelEnableTextDisplay Motion control The Motion Control group defines the variables that provide PTZ control. For details, refer to NTCIP 1205. Conformance requirement within the group is mandatory.  presetGotoPosition  presetStorePosition  positionPan  positionTilt  positionZoomLens  positionFocusLens  positionIrisLens Note: Camera control through NTCIP on Siqura multichannel products is limited to video channel 1. SNMP MIB NTCIP has its own SNMP MIB. This database is used to store information, which is used to control cameras and other devices in the transportation management system. An electronic version of the MIB is available from a NEMA FTP site. To get access to the FTP site, send your name, organization name, and email address to ntcip@nema.org, and request access. Page 64 16.A.21.q Packet Pg. 1120 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SIQURA PD900 3MP PTZ dome camera with 30x zoom DESCRIPTION The PD900 is a 3MP IP outdoor PTZ camera with 30x optical zoom lens. Utilizing the latest Technology, PD900 efficiently ensures the low bandwidth by real-time H.264/H.265 streams. Its IP66 waterproof and IK10 vandal resistant housing make it suitable for outdoor usage. FEATURES 1/2.8 inch Progressive scan CMOS imager Quad stream H.264, H.265 and MJPEG 3MP @ 30 fps HDR 30x optical zoom, 10x digital zoom 120 dB WDR (HDR) Support EIS PT servo feedback IP66, IK10 vandal proof ONVIF Profile S, G and Q SIQURA.COM 1/7 16.A.21.q Packet Pg. 1121 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Description Preliminary Specification Multi-stream high definition The integrated camera has a multi-stream capability for simultaneous streaming of H.265, H.264 or MJPEG. Up to 4 combinations of resolutions and frame rates can be configured to satisfy different live viewing and recording scenarios. Open standards Multiple options are available to easily integrate the PD900 to a video management system. In support of open standards, the PD900 is compliant with a range of VMS’s, it supports ONVIF (Profiles S, G, and Q) and the Siqura API. PT Servo feedback The PD910 pan and tilt motors are controlled by servo feedback, keeping track of the PTZ position at all times. No more drifting PTZ head due to shocks, vibration or vandalism. When the head is forced from its position, it will return immediately. Power source choices The PD900 can be powered with 12Vdc, 24 Vac or over the network with PoE+ sources. SIQURA.COM 2/7 16.A.21.q Packet Pg. 1122 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Camera Image sensor 1/2.8" Progressive scan CMOS Effective pixels 2065x1553 Min. illumination 0.04 lux Color, 0.002 lux B/W (F/1.6) Shutter speed 1 to 1/10,000 sec Day/Night IR-cut filter Lens 30x zoom Iris P-iris and auto-iris Focal length 4.3mm to 129 mm (F/1.6) Horizontal field of view 62° (W) to 2.0° (T) Lens material High-grade optical glass PTZ Pan range 360° Continuous rotation Tilt range -20° to +100° Number of presets 256 Preset speed 280°/s Manual speed 0.1°/s to 90°/s Pan; 0.1°/s to 55°/s Tilt Preset accuracy 0.16° Features Speed by zoom Sequence Scan 8 Cruise Scan 8 Autopan 4 Body material Aluminum alloy, ABS Internal demister/heater Standard Image control Dynamic range (WDR)120 dB, dual exposure HDR White balance Auto, ATW, Manual, One push Image settings Contrast Brightness Saturation Hue Sharpness SNR Better than 54dB Noise reduction 3DNR, 2DNR, Color Low, mid, high (w/ Motion Compensation) Image Stabilization Yes (Digital) Digital zoom 10x Text and picture overlay Compass, date & time, 4x line (40 characters each), preset title, image, image transparency Privacy masks 16 Image rotation 90°, 180°, 270° rotation Video Video compression H.265, H.264 (main or high profile); MJPEG Number of compression instances Any combination of H.265 or H.264 streams with possibly one MJPEG stream. Supported resolutions 2065x1553 (3MP); 1920x1080;1280x1024; 1280x720; 1024x768; 800x600; SIQURA.COM 3/7 16.A.21.q Packet Pg. 1123 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Specs Video 720x567(D1); 640x480 (VGA); 352x288 (CIF) Max streaming (H264/H265/MJPEG) 60fps 2048x1536 1280x720 60fps 2048x1536 800x600 720x480 352x240 30fps 2048x1536 1920x1080 1280x1024 1280x1024 30fps (dual shutter WDR)2048x1536 1920x1080 1280x1024 720x480 Compression bit rate control Constant bit rate (CBR), variable bit rate (VBR), Low bit rate (LBR) Number of video output streams Up to 20 (RTSP) Total output data rate (max)60 Mb/s Video frame rate 1 to 60 fps, 1 to 50 fps Analog video output PAL/NTSC (BNC) Audio Audio compression G.711, G.726, AAC, LPCM Audio Input Line in Audio Output Line out Analytics Event detection Motion Detection; Audio detection Event Triggers External Input, Analytics, Network Failure Detection, Periodical Event, Manual Trigger Network Local storage Micro SD/SDHC/SDXC up to 128 GB; Network storage NAS (Support NFS, SMB/CIFS) Protocols IPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, DHCP, PPPoE, Diamond*, NTCIP*. Security User authentication, IP filtering, Digest authentication (RTSP, HTTP) HTTPS encryption (TLS1.2); IEEE 802.1x port-based network access control Standard ONVIF (Profile S, Profile G, Profile Q), Siqura API Web browser IE 9, 10 and 11; limited support for Edge, Chrome, Firefox Network interface 10/100 Mb (RJ45) Environmental Ingress protection level IP66 Ambient temperature -40 °C to +50 °C (-40 °F to +122 °F) Relative humidity 5 to 100% Power supply 12Vdc, 24 Vac, 802.3at, class 4 Power consumption Max. 25.4 W Mechanical Interfaces - Ethernet RJ45 SIQURA.COM 4/7 16.A.21.q Packet Pg. 1124 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Specs Mechanical - Alarm in / out 4x / 2x Terminal Block - 12Vdc Terminal Block - 24Vac Terminal Block - Audio in / out terminal Block - Video out BNC Connector - RS485 Terminal Block Dimensions diameter 210 x 279 mm with Sunshield Weight 2.9 kg Impact Rating IK10 Color RAL 9003 (signal white) Ordering information PD900 3 Mp intelligent IP outdoor PTZ camera 30x zoom SIQURA.COM 5/7 16.A.21.q Packet Pg. 1125 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) DIMENSION IN MM SIQURA.COM 6/7 16.A.21.q Packet Pg. 1126 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) RELATED Siqura PTZ dome accessoires PTZ dome mounting accessories Powered by TCPDF (www.tcpdf.org) SIQURA.COM 7/7 16.A.21.q Packet Pg. 1127 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) SIQURA PD910 3MP bubbleless PTZ dome camera with 40x zoom DESCRIPTION The PD910 is a 3-megapixel IP outdoor PTZ dome camera without a bubble. A powerful high-grade 40x optical zoom lens ensures sharp and clear images over a wide range. Built-in IR for zero lux operation. The high-speed pan, tilt, and zoom mechanism and auto-focus give instantaneous and stable focused images. Due to its unique servo feedback control the camera will always maintain its original (PT) position. When forced away from its original position the camera will return immediately. FEATURES 1/2.8 inch Progressive scan CMOS imager 3MP @ 30 fps HDR 40x optical zoom, 10x digital zoom 20° tilt above horizon without optical distortion 120 dB WDR (HDR) Supports EIS, Defog, BLC, and HLC Built-in IR illumination up to 200 m PT servo feedback ONVIF Profile S, G and Q SIQURA.COM 1/6 16.A.21.q Packet Pg. 1128 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Description The PD910 is a 3MP intelligent IP outdoor high-speed PTZ dome camera with built-in IR- illumination and 40x optical zoom. No more problems like optical distortion when looking at the horizon or IR scattering due to dirt or water on the bubble due to its unique bubble- less design. PT Servo feedback The PD910 pan and tilt motors are controlled by servo feed back, keeping track of the PTZ position at all times. No more drifting PTZ head due to shocks, vibration or vandalism. When the head is forced from its position, it will return immediately. Multi-stream high definition The integrated camera has multi-stream capability for simultaneous streaming of H.265, H.264 or MJPEG. Up to 4 combinations of resolutions and frame rates can be configured to satisfy different live viewing and recording scenarios. Open standards Multiple options are available to easily integrate the PD910 to a video management system. In support of open standards, the PD910 is compliant with a range of VMS’s, it supports ONVIF (Profiles S, G, and Q) and the Siqura API. Power source choices The PD910 can be powered with 12Vdc, 24 Vac or over the network with Hi-PoE sources. (802.3bt Type 3: max 60 W) Image enhancement A wide variety of features can be used to increase image quality and fluency such as high dynamic range (120 dB WDR), defog, BLC and HLC. With low bandwidth. SIQURA.COM 2/6 16.A.21.q Packet Pg. 1129 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Camera Image sensor 1/2.8" Progressive scan CMOS Effective pixels 2065x1553 Min. illumination 0.04 lux Color, 0.002 lux B/W (F/1.6) Shutter speed 1 to 1/10,000 sec Day/Night IR-cut filter Lens 40x zoom IR Illumination 850 nm IR illumination distance 200m Iris P-iris and auto-iris Focal length 4.3mm to 170 mm (F/1.6) Horizontal field of view 62° (W) to 2.0° (T) Lens material High-grade optical glass PTZ Pan range 360° Continuous rotation Tilt range -20° to +100° Number of presets 256 Preset speed 280°/s Manual speed 0.1°/s to 90°/s Pan; 0.1°/s to 55°/s Tilt Preset accuracy 0.16° Features Speed by zoom Sequence Scan 8 Cruise Scan 8 Autopan 4 Body material Aluminum alloy, ABS Internal demister/heater Standard Image control Dynamic range (WDR)120 dB, dual exposure HDR White balance Auto, ATW, Manual, One push Image settings Contrast Brightness Saturation Hue Sharpness SNR Better than 50dB Noise reduction 3DNR, 2DNR, Color Low, mid, high (w/ Motion Compensation) Image Stabilization Yes (Digital) Image enhancement HLC/BLC/Defog Digital zoom 10x Text and picture overlay Compass, date & time, 4x line (40 characters each), preset title, image, image transparency Privacy masks 16 Image rotation 90°, 180°, 270° rotation Video Video compression H.265, H.264 (main or high profile); MJPEG SIQURA.COM 3/6 16.A.21.q Packet Pg. 1130 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Specs Video Number of compression instances Any combination of H.265 or H.264 streams with possibly one MJPEG stream. Supported resolutions 2065x1553 (3MP); 1080p30,1280x1024; 720p30; 1024x768; 800x600; 720x567(D1); 640x480 (VGA); 352x288 (CIF) Compression capabilities H.265 (HEVC), in MP and HP H.264/MPEG-4 AVC (H.264) in MP and HP MJPEG (for resolutions lower than or equal to 1920x1080) Max streaming (H264/H265/MJPEG) 60fps 2048x1536 1280x720 60fps 2048x1536 800x600 720x480 352x240 30fps 2048x1536 1920x1080 1280x1024 1280x1024 30fps (dual shutter WDR)2048x1536 1920x1080 1280x1024 720x480 Compression bit rate control Constant bit rate (CBR), variable bit rate (VBR), Low bit rate (LBR) Number of video output streams Up to 20 (RTSP) Total output data rate (max)60 Mb/s Video frame rate 1 to 60 fps, 1 to 50 fps Analog video output PAL/NTSC (BNC) Audio Audio compression G.711, G.726, AAC, LPCM Audio Input Line in Audio Output Line out Analytics Event detection Motion Detection; Audio detection Event Triggers External Input, Analytics, Network Failure Detection, Periodical Event, Manual Trigger Network Local storage Micro SD/SDHC/SDXC up to 128 GB; Network storage NAS (Support NFS, SMB/CIFS) Protocols IPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, DHCP, PPPoE, Diamond*, NTCIP*. Security User authentication, IP filtering, Digest authentication (RTSP, HTTP) HTTPS encryption (TLS1.2); IEEE 802.1x port-based network access control Standard ONVIF (Profile S, Profile G, Profile Q), Siqura API Web browser IE 9, 10 and 11; limited support for Edge, Chrome, Firefox Environmental Ingress protection level IP66 Ambient temperature (NEMA TS-2)-40 °C to +74 °C (-40 °F to +165 °F) Relative humidity 5 to 100% Power supply 12Vdc, 24 Vac, 802.3bt Type 3 (Hi-PoE, 50 W) SIQURA.COM 4/6 16.A.21.q Packet Pg. 1131 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Specs Environmental Power consumption Max. 39 W Mechanical Interfaces - Ethernet RJ45 - Alarm in / out 4x / 2x Terminal Block - 12Vdc Terminal Block - 24Vac Terminal Block - Audio in / out terminal Block - Video out BNC Connector - RS485 Terminal Block Dimensions diameter 207.4 x 300.4 mm with Sunshield Weight 3.8 kg Color RAL 9003 (signal white) Ordering information PD910 3 Mp intelligent IP outdoor PTZ camera 40x zoom SIQURA.COM 5/6 16.A.21.q Packet Pg. 1132 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) DIMENSIONS IN MM Powered by TCPDF (www.tcpdf.org) SIQURA.COM 6/6 16.A.21.q Packet Pg. 1133 Attachment: 19-7607 Temple Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 11/05/2019 Valent Group, LLC 1425 6th Avenue S.E. Decatur AL 35601 Carrie Williams (256) 260-1202 (256) 350-5318 cwilliams@valentgroup.com Temple, Inc. P.O. Box 2066 317 Bank Street Decatur AL 35602 Travelers Property Casualty Co. of America 25674 Phoenix Insurance Company 25623 Alabama Self-Insured W/C Fund Midwest Employers Casualty 23612 Sentry Insurance 24988 Master 2019/20 A Y Y630999K9226 04/01/2019 04/01/2020 1,000,000 100,000 5,000 1,000,000 2,000,000 2,000,000 B Comp Collision 810-8M955708-19-14-G 04/01/2019 04/01/2020 1,000,000 A CUP 3J12005A-19-14 04/01/2019 04/01/2020 1,000,000 1,000,000 C/D 311000/POAL129001 01/01/2019 01/01/2020 1,000,000 1,000,000 1,000,000 E Workers Compensation-FL, GA, NC 90-53092-01 01/01/2019 01/01/2020 Each Acc/Each Empl 1,000,000 Policy Limit 1,000,000 Project #19-7607 "Traffic Operations Signal Components & Hardware. Collier County Board of County Commissioners are included as an additional insured under the captioned Commercial General Liability and Automobile Liability Policies on a primary and non-contributory basis if and to the extent required by written contract. Collier County Board of County Commissioners 3295 Tamiami Trail E. Naples FL 34112 SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 16.A.21.r Packet Pg. 1134 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1135 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1136 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1137 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1138 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1139 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1140 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1141 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1142 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.r Packet Pg. 1143 Attachment: 19-7607 Temple_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1144 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1145 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1146 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1147 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1148 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1149 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1150 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 16.A.21.s Packet Pg. 1151 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LED Countdown Pedestrian Signals 16 x 18 inch Excellent Appearance & Visibility • Robust LED system design enables high luminous intensity over product life cycle • Efficient optical system minimizes power consumption while providing excellent uniformity and viewing angles • Single piece transparent front window with internal masking to prevent: - countdown and icons display from being readily visible when not in operation - scratches and abrasions compared with external silk screen technology • Bright and clear icons • Fully uniform look • Lower profile* • Improved luminous intensity uniformity Outstanding Reliability & Robust Operation • Internal conflict monitor preventing walk and don’t walk indications to light up at the same time • Individual power supply drives each display to ensure proper indication • Reduced overall power consumption* * Compared to PS7-CFF1-27A Meets Rigorous Certification & Testing Standards • Intertek ETL Verified compliant • DOE compliant • Using MIL-STD-810F and NEMA 250-1991 Type 4 for environmental robustness, passed reliability and qualification testing including high temperature, high humidity cycling (HTHH for 1,000 hours) • Compliant (for Full Hand/Full Person) with the ITE PTCSI LED Signal Modules - version dated August 2010 The Greatest Signals Stand the Test of Time.TM GE Lighting 16.A.21.s Packet Pg. 1152 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) LED Countdown Pedestrian Signals • 16 x 18 inch module Mechanical Outline Dimensions in inches. (mm) indicates metric equivalent 17.7" (449) 16.0" (406) 13.9" (354) 17.7" (449) 16.0" (406) 17.7" (449) 16.0" (406) 13.9" (354) 17.7" (449) 16.0" (406) 17.7" (449) 16.0" (406) 13.9" (354) 17.7" (449) 16.0" (406) Operating Specifications Parameter Rating Operating Temperature Range* -40 to +74°C (-40 to +165°F) Operating Voltage Range 80 to 135 V (60Hz AC) Power Factor (PF) > 90 % Total Harmonic Distortion (THD) < 20 % Voltage Turn-Off (VTO) 35 V Start-up Time < 75msec Lens & Shell Material UV Stabilized Polycarbonate Wiring 16 AWG, Color Coded with Strain Relief LED Color Hand: Portland Orange Person: Lunar White Countdown: Portland Orange Default Mode Hand only * Performed in compliance with ITE test method described in the technical notes Design Compliance Test type Compliance Luminous intensity, ITE PTCSI LED Signal Modules Uniformity & Viewing Angles version of August 2010 Chromaticity ITE PTCSI LED Signal Modules version of August 2010 MIL-STD-810F Moisture Resistance Procedure 1, Rain & Blowing Rain Mechanical Vibration MIL-STD-883 Test Method 2007 Electronic Noise FCC Title 47 Sec 15 Sub. B1 Sec. 2.1.6 NEMA TS 2-2003 Transient Voltage Protection Sec. 2.1.8 NEMA TS 2-2003 Controller Compatibility NEMA TS-2-2003 Sec. 8.2 IEC 1000-4-5 & Sec. 6.1.2 ANSI/IEEE Transient C62.41.2 - 2002, 3KV, 2 Ω Suppression Sec. 8.0 IEC 1000-4-12 & Sec. 6.1.1 ANSI/IEEE C62.41.2 - 2002, 6KV, 30 Ω Wiring NFPA 70, National Electric Code Digits MUTCD 2003, Section 4E.07, Countdown Numbers Minimum 9’’ Height & 7’’ Width 1 Class A Product Information Minimum Luminous Dimensions Symbol AC Voltage Power (W) Intensity Cd/m2 Model Number Dimensions Layout Hand Person Nominal Hand Person Countdown Hand/Digit Person PS7-CFF1-VLA 16 x 18 in Overlay Full Full 120V - 60Hz 6 6 8 1400 2200 Countdown 1 Class A. 2 Full MUTCD Compliance Test Condition : Ta = 25˚C. All values are design or typical values when measured under laboratory conditions. GE Lighting • 1-888-MY-GE-LED • www.gelighting.com 1 - 8 8 8 - 6 9 - 4 3 - 5 3 3 for North America · or · +1.216.266.2419 GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. “The Greatest Signals Stand the Test of Time” are trademarks of GE Lighting, LLC. The GE brand and logo are trademarks of the General Electric Company. © 2014 GE Lighting, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. TRAF289-R012615 16.A.21.s Packet Pg. 1153 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) www.mccain-inc.com ® shown in Federal yellow shown in black 16 inch housing 12 inch housing Cabinets Controllers Signals Signs Software Specialty Overview Benefits Product Description McCain’s Pedestrian Signal Housings are designed to be used in conjunction with standard or LED pedestrian signal modules to promote pedestrian safety at intersections. McCain housings exceed the Institute of Transportation Engineers (ITE) standards, offering a low maintenance and durable housing in either die cast aluminum or injection molded polycarbonate resin. They are available in 12” or 16” styles, and the 12” housings are available in 1-section or 2-section varieties. The 12” polycarbonate housings are reinforced with a 10 percent fiberglass fill for superior strength and durability unmatched by standard polycarbonate resins. The fiberglass fill is optional on the 16” polycarbonate housings. 12” or 16” styles• Rugged aluminum or polycarbonate construction• Designed for standard symbol or word pedestrian • signal modules including LED Door-hinge hardware can be removable and • reversible or permanently attached Highly customizable including a variety of • fabrication, mounting, and visor options 16” available with • Vantage Visor™ for increased visibility and impact protection The McCain Pedestrian Signal Housing is available in 12” and 16” styles and a variety of configurations including aluminum or polycarbonate construction, with a number of options (see Options for details). The door is attached with stainless steel detent-type clevis or roll pins and eye bolt/wing nut assemblies. Two equally spaced mounting lugs, integrally cast into the top and bottom of the 16” and the sides of the 12”, allow the doors to hinge from either direction. When clevis pins are used, the door and eye bolt assemblies can be removed and rotated without the use of any tools, facilitating maintenance. All interior mounting locations on the 16” housing are symmetrically positioned, allowing the rotation of components when using the bi-directional McCain Clamshell Mount to mount to the right or left side. Pedestrian Signal Housing 12” Housing 16” Housing Aluminum Polycarbonate 16.A.21.s Packet Pg. 1154 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) © 2009 McCain Inc. Updated 02/12/09. McCain reserves the right to change product specifications without notice. For the most up-to-date information, please contact McCain. To learn more about McCain’s Integrated Traffic Solutions, please contact info@mccain-inc.com or call (760) 727-8100 2365 OAK RIDGE WAY // VISTA, CALIFORNIA 92081 // USA // WWW.MCCAIN-INC.COM® Top Side Front Dimensions rounded to the nearest 0.1” 12” housing 16” housing 16” Clamshell mount (sold separately) 16” Tunnel visor (sold separately) 16” Vantage Visor (sold separately) 16” with Vantage Visor12” 2-section with tunnel visors Hand/Man modules (sold separately) Standard Features Stainless steel hardware includes hinge pins (detent-type clevis or • roll) and eye bolt/wing nuts (latch) Terminal block with quick-disconnect fittings on one side of each • terminal position and screw clamps on the other side General Specifications Dimensions*:12” Housing 16” Housing Housing:13.2” H x 13.2” W x 5.7” D 15.8” H x 17.4” W x 7.3” D Door (incl. tabs): 13.5” H x 15.0” W x 5.6” D 18.7” H x 18.5” W x 1.8” D Overall:14.0” H x 15.0” W x 11.3” D 18.7” H x 18.5” W x 9.1” D Material:Polycarbonate: Ultraviolet and heat stabilized, flame retardant, permanently colored, 10% fiberglass rein- forcement (12” standard, 16” optional) Aluminum: Type 360, reduced corrosion, increased powder coat adhesion Finish(es):Polycarbonate: Colored resins integral to housing Aluminum: Powder coated Color(s):Federal yellow, signal green, black, or custom colors Access:Front door (1), 16”: hinged top or bottom 12”: hinged left or right Latching System:Eye bolt assemblies Mounting:Standard signal hardware Environmental:Operating temperature: -37o C to +74o C Humidity: 0 to 95% (non-condensing) Shipping Weight:12”: Poly 5 lbs, Al 9 lbs 16”: Poly 9 lbs, Al 10 lbs Options Polycarbonate 10% fiberglass fill for added durability (optional on • 16”, standard on 12”) Modules: LED or incandescent; international Hand/Man symbol, • “WALK”/”DON’T WALK” words Visors: • Vantage Visor (16” only), tunnel, or cap (12” only) Clamshell mount (16” only - housing available pre-drilled for mount)• Custom terminal blocks• Door hardware permanent (roll pins) or removable (clevis pins)• Pedestrian Signal Housing * Dimensions are approximate and vary based on material used 16.A.21.s Packet Pg. 1155 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) THE E-VERIFY MEMORANDUM OF UNDERSTANDING FOR EMPLOYERS USING AN E-VERIFY EMPLOYER AGENT ARTICLE I PURPOSE AND AUTHORITY The parties to this agreement are the Department of Homeland Security (DHS), the Transportation Control Systems Inc (Employer), and the E-Verify Employer Agent. The purpose of this agreement is to set forth terms and conditions which the Employer and the E-Verify Employer Agent will follow while participating in E-Verify. E-Verify is a program that electronically confirms an employee’s eligibility to work in the United States after completion of Form I-9, Employment Eligibility Verification (Form I-9). This Memorandum of Understanding (MOU) explains certain features of the E-Verify program and describes specific responsibilities of the Employer, the E-Verify Employer Agent, the Social Security Administration (SSA), and DHS. Authority for the E-Verify program is found in Title IV, Subtitle A, of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996 (IIRIRA), Pub. L. 104-208, 110 Stat. 3009, as amended (8 U.S.C. § 1324a note). The Federal Acquisition Regulation (FAR) Subpart 22.18, “Employment Eligibility Verification” and Executive Order 12989, as amended, provide authority for Federal contractors and subcontractors (Federal contractor) to use E- Verify to verify the employment eligibility of certain employees working on Federal contracts. ARTICLE II RESPONSIBILITIES A. RESPONSIBILITIES OF THE EMPLOYER 1. The Employer agrees to display the following notices supplied by DHS in a prominent place that is clearly visible to prospective employees and all employees who are to be verified through the system: A. Notice of E-Verify Participation B. Notice of Right to Work 2. The Employer agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the Employer representatives to be contacted about E-Verify. The Employer also agrees to keep such information current by providing updated information to SSA and DHS whenever the representatives’ contact information changes. 3. The Employer shall become familiar with and comply with the most recent version of the E-Verify User Manual. The Employer will obtain the E-Verify User Manual from the E-Verify Employer Agent. 4. The Employer agrees to comply with current Form I-9 procedures, with two exceptions: A. If an employee presents a "List B" identity document, the Employer agrees to only accept "List B" documents that contain a photo. (List B documents identified in 8 C.F.R. 274a.2(b)(1)(B)) can be presented during the Form I-9 process to establish identity.) If an employee objects to the photo requirement for religious reasons, the Employer should contact E-Verify at 1-888-464-4218. B. If an employee presents a DHS Form I-551 (Permanent Resident Card), Form I-766 (Employment Authorization Document), or U.S. Passport or Passport Card to complete I-Form I-9, the Employer agrees to make a photocopy of the document and to retain the photocopy with the employee’s Form I-9. The Employer will use the photocopy to verify the photo and to assist DHS with its review of photo mismatches that employees contest. DHS may in the future designate other documents that activate the photo screening tool. Note: Subject only to the exceptions noted previously in this paragraph, employees still retain the right to present any List A, or List B and List C, document(s) to complete the Form I-9. 5. The Employer agrees to record the case verification number on the employee's Form I-9 or to print the screen containing the case verification number and attach it to the employee's Form I-9. Company ID Number:571783 Client Company ID Number:1263530 Page 1 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1156 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) 6. The Employer agrees that, although it participates in E-Verify, the Employer has a responsibility to complete, retain, and make available for inspection Forms I-9 that relate to its employees, or from other requirements of applicable regulations or laws, including the obligation to comply with the antidiscrimination requirements of section 274B of the INA with respect to Form I-9 procedures. A. The following modified requirements are the only exceptions to an Employer’s obligation to not employ unauthorized workers and comply with the anti-discrimination provision of the INA: (1) List B identity documents must have photos, as described in paragraph 5 above; (2) When an Employer confirms the identity and employment eligibility of newly hired employee using E-Verify procedures, the Employer establishes a rebuttable presumption that it has not violated section 274A(a)(1)(A) of the Immigration and Nationality Act (INA) with respect to the hiring of that employee; (3) If the Employer receives a final nonconfirmation for an employee, but continues to employ that person, the Employer must notify DHS and the Employer is subject to a civil money penalty between $550 and $1,100 for each failure to notify DHS of continued employment following a final nonconfirmation; (4) If the Employer continues to employ an employee after receiving a final nonconfirmation, then the Employer is subject to a rebuttable presumption that it has knowingly employed an unauthorized alien in violation of section 274A(a)(1)(A); and (5) no E-Verify participant is civilly or criminally liable under any law for any action taken in good faith based on information provided through the E-Verify. B. DHS reserves the right to conduct Form I-9 compliance inspections, as well as any other enforcement or compliance activity authorized by law, including site visits, to ensure proper use of E-Verify. 7. The Employer is strictly prohibited from creating an E-Verify case before the employee has been hired, meaning that a firm offer of employment was extended and accepted and Form I-9 was completed. The Employer agrees to create an E-Verify case for new employees within three Employer business days after each employee has been hired (after both Sections 1 and 2 of Form I-9 have been completed), and to complete as many steps of the E-Verify process as are necessary according to the E-Verify User Manual. If E- Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the Employer's attempting, in good faith, to make inquiries during the period of unavailability. 8. The Employer agrees not to use E-Verify for pre-employment screening of job applicants, in support of any unlawful employment practice, or for any other use that this MOU or the E-Verify User Manual does not authorize. 9. The Employer must use E-Verify (through its E-Verify Employer Agent) for all new employees. The Employer will not verify selectively and will not verify employees hired before the effective date of this MOU. Employers who are Federal contractors may qualify for exceptions to this requirement as described in Article II.B of this MOU. 10. The Employer agrees to follow appropriate procedures (see Article III below) regarding tentative nonconfirmations. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. Further, when employees contest a tentative nonconfirmation based upon a photo mismatch, the Employer must take additional steps (see Article III.B below) to contact DHS with information necessary to resolve the challenge. 11. The Employer agrees not to take any adverse action against an employee based upon the employee's perceived employment eligibility status while SSA or DHS is processing the verification request unless the Employer obtains knowledge (as defined in 8 C.F.R. § 274a.1(l)) that the employee is not work authorized. The Employer understands that an initial inability of the SSA or DHS automated verification system to verify work authorization, a tentative nonconfirmation, a case in continuance (indicating the need for additional time for the government to resolve a case), or the finding of a photo mismatch, does not establish, and should not be interpreted as, evidence that the employee is not work authorized. In any of such cases, the employee must be provided a full and fair opportunity to contest the finding, and if he or she does so, the employee may not be terminated or suffer any adverse employment consequences based upon the employee’s perceived employment eligibility status (including denying, reducing, or extending work hours, delaying or preventing training, requiring an employee to work in poorer conditions, withholding pay, refusing to assign the employee to a Federal contract or other assignment, or otherwise assuming that he or she is unauthorized to work) until and unless secondary verification by SSA or DHS has been completed and a final nonconfirmation has been issued. If the employee does not choose to contest a tentative nonconfirmation or a photo mismatch or if a secondary verification is completed and a final nonconfirmation is issued, then the Employer can find the employee is not work authorized and terminate the employee’s Company ID Number:571783 Client Company ID Number:1263530 Page 2 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1157 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) employment. Employers or employees with questions about a final nonconfirmation may call E-Verify at 1- 888-464-4218 (customer service) or 1-888-897-7781 (worker hotline). 12. The Employer agrees to comply with Title VII of the Civil Rights Act of 1964 and section 274B of the INA as applicable by not discriminating unlawfully against any individual in hiring, firing, employment eligibility verification, or recruitment or referral practices because of his or her national origin or citizenship status, or by committing discriminatory documentary practices. The Employer understands that such illegal practices can include selective verification or use of E-Verify except as provided in part D below, or discharging or refusing to hire employees because they appear or sound “foreign” or have received tentative nonconfirmations. The Employer further understands that any violation of the immigration-related unfair employment practices provisions in section 274B of the INA could subject the Employer to civil penalties, back pay awards, and other sanctions, and violations of Title VII could subject the Employer to back pay awards, compensatory and punitive damages. Violations of either section 274B of the INA or Title VII may also lead to the termination of its participation in E-Verify. If the Employer has any questions relating to the anti-discrimination provision, it should contact OSC at 1-800-255-8155 or 1-800-237-2515 (TDD). 13. The Employer agrees that it will use the information it receives from E-Verify (through its E-Verify Employer Agent) only to confirm the employment eligibility of employees as authorized by this MOU. The Employer agrees that it will safeguard this information, and means of access to it (such as PINS and passwords), to ensure that it is not used for any other purpose and as necessary to protect its confidentiality, including ensuring that it is not disseminated to any person other than employees of the Employer who are authorized to perform the Employer's responsibilities under this MOU, except for such dissemination as may be authorized in advance by SSA or DHS for legitimate purposes. 14. The Employer agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email a E-Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 15. The Employer acknowledges that the information it receives through the E-Verify Employer Agent from SSA is governed by the Privacy Act (5 U.S.C. § 552a(i)(1) and (3)) and the Social Security Act (42 U.S.C. 1306(a)). Any person who obtains this information under false pretenses or uses it for any purpose other than as provided for in this MOU may be subject to criminal penalties. 16. The Employer agrees to cooperate with DHS and SSA in their compliance monitoring and evaluation of E- Verify (whether directly or through their E-Verify Employer Agent), which includes permitting DHS, SSA, their contractors and other agents, upon reasonable notice, to review Forms I-9 and other employment records and to interview it and its employees regarding the Employer’s use of E-Verify, and to respond in a prompt and accurate manner to DHS requests for information relating to their participation in E-Verify. 17. The Employer shall not make any false or unauthorized claims or references about its participation in E- Verify on its website, in advertising materials, or other media. The Employer shall not describe its services as federally-approved, federally-certified, or federally-recognized, or use language with a similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify services and any claim to that effect is false. 18. The Employer shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the prior written consent of DHS. 19. The Employer agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see M-795 (Web)) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the Employer’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 20. The Employer understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the Employer may be subject to appropriate legal action and termination of its participation in E- Verify according to this MOU. 21. The Employer agrees that it will notify its E-Verify Employer Agent immediately if it is awarded a federal contract with the FAR clause. Your E-Verify Employer Agent needs this information so that it can update your company’s E-Verify profile within 30 days of the contract award date. B. RESPONSIBILITIES OF E-VERIFY EMPLOYER AGENT 1. The E-Verify Employer Agent agrees to provide to the SSA and DHS the names, titles, addresses, and telephone numbers of the E-Verify Employer Agent representatives who will be accessing information under E-Verify and shall update them as needed to keep them current. 2. The E-Verify Employer Agent agrees to become familiar with and comply with the E-Verify User Manual and provide a copy of the most current version of the E-Verify User Manual to the Employer so that the Employer Company ID Number:571783 Client Company ID Number:1263530 Page 3 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1158 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) can become familiar with and comply with E-Verify policy and procedures. The E-Verify Employer Agent agrees to obtain a revised E-Verify User Manual as it becomes available and to provide a copy of the revised version to the Employer no later than 30 days after the manual becomes available. 3. The E-Verify Employer Agent agrees that any person accessing E-Verify on its behalf is trained on the most recent E-Verify policy and procedures. 4. The E-Verify Employer Agent agrees that any E-Verify Employer Agent Representative who will perform employment verification cases will complete the E-Verify Tutorial before that individual initiates any cases. A. The E-Verify Employer Agent agrees that all E-Verify Employer Agent representatives will take the refresher tutorials initiated by the E-Verify program as a condition of continued use of E-Verify, including any tutorials for Federal contractors, if any of the Employers represented by the E-Verify Employer Agent is a Federal contractor. B. Failure to complete a refresher tutorial will prevent the E-Verify Employer Agent and Employer from continued use of E-Verify. 5. The E-Verify Employer Agent agrees to grant E-Verify access only to current employees who need E-Verify access. The E-Verify Employer Agent must promptly terminate an employee’s E-Verify access if the employee is separated from the company or no longer needs access to E-Verify. 6. The E-Verify Employer Agent agrees to obtain the necessary equipment to use E- Verify as required by the E-Verify rules and regulations as modified from time to time. 7. The E-Verify Employer Agent agrees to, consistent with applicable laws, regulations, and policies, commit sufficient personnel and resources to meet the requirements of this MOU. 8. The E-Verify Employer Agent agrees to provide its clients with training on E-Verify processes, policies, and procedures. The E-Verify Employer Agent also agrees to provide its clients with ongoing E-Verify training as needed. E-Verify is not responsible for providing training to clients of E-Verify Employer Agents. 9. The E-Verify Employer Agent agrees to provide the Employer with the notices described in Article II.B.1 below. 10. The E-Verify Employer Agent agrees to create E-Verify cases for the Employer it represents in accordance with the E-Verify Manual, the E-Verify Web-Based Tutorial and all other published E-Verify rules and procedures. The E-Verify Employer Agent will create E-Verify cases using information provided by the Employer and will immediately communicate the response back to the Employer. If E-Verify is temporarily unavailable, the three-day time period will be extended until it is again operational in order to accommodate the E-Verify Employer Agent’s attempting, in good faith, to make inquiries on behalf of the Employer during the period of unavailability 11. When the E-Verify Employer Agent receives notice from a client company that it has received a contract with the FAR clause, then the E-Verify Employer Agent must update the company’s E-Verify profile within 30 days of the contract award date. 12. If data is transmitted between the E-Verify Employer Agent and its client, then the E-Verify Employer Agent agrees to protect personally identifiable information during transmission to and from the E-Verify Employer Agent. 13. The E-Verify Employer Agent agrees to notify DHS immediately in the event of a breach of personal information. Breaches are defined as loss of control or unauthorized access to E-Verify personal data. All suspected or confirmed breaches should be reported by calling 1-888-464-4218 or via email at E- Verify@dhs.gov. Please use “Privacy Incident – Password” in the subject line of your email when sending a breach report to E-Verify. 14. The E-Verify Employer Agent agrees to fully cooperate with DHS and SSA in their compliance monitoring and evaluation of E-Verify, including permitting DHS, SSA, their contractors and other agents, upon reasonable notice, to review Forms I-9, employment records, and all records pertaining to the E-Verify Employer Agent’s use of E-Verify, and to interview it and its employees regarding the use of E-Verify, and to respond in a timely and accurate manner to DHS requests for information relating to their participation in E- Verify. 15. The E-Verify Employer Agent shall not make any false or unauthorized claims or references about its participation in E-Verify on its website, in advertising materials, or other media. The E-Verify Employer Agent shall not describe its services as federally-approved, federally-certified, or federally-recognized, or use language with a similar intent on its website or other materials provided to the public. Entering into this MOU does not mean that E-Verify endorses or authorizes your E-Verify Employer Agent services and any claim to that effect is false. 16. The E-Verify Employer Agent shall not state in its website or other public documents that any language used therein has been provided or approved by DHS, USCIS or the Verification Division, without first obtaining the Company ID Number:571783 Client Company ID Number:1263530 Page 4 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1159 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) prior written consent of DHS. 17. The E-Verify Employer Agent agrees that E-Verify trademarks and logos may be used only under license by DHS/USCIS (see ) and, other than pursuant to the specific terms of such license, may not be used in any manner that might imply that the E-Verify Employer Agent’s services, products, websites, or publications are sponsored by, endorsed by, licensed by, or affiliated with DHS, USCIS, or E-Verify. 18. The E-Verify Employer Agent understands that if it uses E-Verify procedures for any purpose other than as authorized by this MOU, the E-Verify Employer Agent may be subject to appropriate legal action and termination of its participation in E-Verify according to this MOU. C. RESPONSIBILITIES OF FEDERAL CONTRACTORS The E-Verify Employer Agent shall ensure that the E-Verify Employer Agent and the Employers represented by the E- Verify Employer Agent carry out the following responsibilities if the Employer is a Federal contractor or becomes a federal contractor. The E-Verify Employer Agent should instruct the client to keep the E-Verify Employer Agent informed about any changes or updates related to federal contracts. It is the E-Verify Employer Agent’s responsibility to ensure that its clients are in compliance with all E-Verify policies and procedures. 1. If the Employer is a Federal contractor with the FAR E-Verify clause subject to the employment verification terms in Subpart 22.18 of the FAR, it will become familiar with and comply with the most current version of the E-Verify User Manual for Federal Contractors as well as the E-Verify Supplemental Guide for Federal Contractors. 2. In addition to the responsibilities of every employer outlined in this MOU, the Employer understands that if it is a Federal contractor subject to the employment verification terms in Subpart 22.18 of the FAR it must verify the employment eligibility of any “employee assigned to the contract” (as defined in FAR 22.1801). Once an employee has been verified through E-Verify by the Employer, the Employer may not reverify the employee through E-Verify. A. An Employer that is not enrolled in E-Verify as a Federal contractor at the time of a contract award must enroll as a Federal contractor in the E-Verify program within 30 calendar days of contract award and, within 90 days of enrollment, begin to verify employment eligibility of new hires using E- Verify. The Employer must verify those employees who are working in the United States, whether or not they are assigned to the contract. Once the Employer begins verifying new hires, such verification of new hires must be initiated within three business days after the hire date. Once enrolled in E-Verify as a Federal contractor, the Employer must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. B. Employers enrolled in E-Verify as a Federal contractor for 90 days or more at the time of a contract award must use E-Verify to begin verification of employment eligibility for new hires of the Employer who are working in the United States, whether or not assigned to the contract, within three business days after the date of hire. If the Employer is enrolled in E-Verify as a Federal contractor for 90 calendar days or less at the time of contract award, the Employer must, within 90 days of enrollment, begin to use E-Verify to initiate verification of new hires of the contractor who are working in the United States, whether or not assigned to the contract. Such verification of new hires must be initiated within three business days after the date of hire. An Employer enrolled as a Federal contractor in E-Verify must begin verification of each employee assigned to the contract within 90 calendar days after date of contract award or within 30 days after assignment to the contract, whichever is later. C. Federal contractors that are institutions of higher education (as defined at 20 U.S.C. 1001(a)), state or local governments, governments of Federally recognized Indian tribes, or sureties performing under a takeover agreement entered into with a Federal agency under a performance bond may choose to only verify new and existing employees assigned to the Federal contract. Such Federal contractors may, however, elect to verify all new hires, and/or all existing employees hired after November 6, 1986. Employers in this category must begin verification of employees assigned to the contract within 90 calendar days after the date of enrollment or within 30 days of an employee’s assignment to the contract, whichever date is later. D. Upon enrollment, Employers who are Federal contractors may elect to verify employment eligibility of all existing employees working in the United States who were hired after November 6, 1986, instead of verifying only those employees assigned to a covered Federal contract. After enrollment, Employers must elect to verify existing staff following DHS procedures and begin E-Verify verification of all existing employees within 180 days after the election. E. The Employer may use a previously completed Form I-9 as the basis for creating anE-Verify case for an employee assigned to a contract as long as: i. That Form I-9 is complete (including the SSN) and complies with Article II.A.6, Company ID Number:571783 Client Company ID Number:1263530 Page 5 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1160 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) ii. The employee’s work authorization has not expired, and iii. The Employer has reviewed the information reflected in the Form I-9 either in person or in communications with the employee to ensure that the employee’s Section 1, Form I-9 attestation has not changed (including, but not limited to, a lawful permanent resident alien having become a naturalized U.S. citizen). F. The Employer shall complete a new Form I-9 consistent with Article II.A.6 or update the previous Form I-9 to provide the necessary information if: i. The Employer cannot determine that Form I-9 complies with Article II.A.6, ii. The employee’s basis for work authorization as attested in Section 1 has expired or changed, or iii. The Form I-9 contains no SSN or is otherwise incomplete. Note: If Section 1 of Form I-9 is otherwise valid and up-to-date and the form otherwise complies with Article II.C.5, but reflects documentation (such as a U.S. passport or Form I-551) that expired after completing Form I-9, the Employer shall not require the production of additional documentation, or use the photo screening tool described in Article II.A.5, subject to any additional or superseding instructions that may be provided on this subject in the E-Verify User Manual. G. The Employer agrees not to require a second verification using E-Verify of any assigned employee who has previously been verified as a newly hired employee under this MOU or to authorize verification of any existing employee by any Employer that is not a Federal contractor based on this Article. 3. The Employer understands that if it is a Federal contractor, its compliance with this MOU is a performance requirement under the terms of the Federal contract or subcontract, and the Employer consents to the release of information relating to compliance with its verification responsibilities under this MOU to contracting officers or other officials authorized to review the Employer’s compliance with Federal contracting requirements. D. RESPONSIBILITIES OF SSA 1. SSA agrees to allow DHS to compare data provided by the Employer (through the E-Verify Employer Agent) against SSA’s database. SSA sends DHS confirmation that the data sent either matches or does not match the information in SSA’s database. 2. SSA agrees to safeguard the information the Employer provides (through the E-Verify Employer Agent) through E-Verify procedures. SSA also agrees to limit access to such information, as is appropriate by law, to individuals responsible for the verification of Social Security numbers or responsible for evaluation of E- Verify or such other persons or entities who may be authorized by SSA as governed by the Privacy Act (5 U.S.C. § 552a), the Social Security Act (42 U.S.C. 1306(a)), and SSA regulations (20 CFR Part 401). 3. SSA agrees to provide case results from its database within three Federal Government work days of the initial inquiry. E-Verify provides the information to the E-Verify Employer Agent. 4. SSA agrees to update SSA records as necessary if the employee who contests the SSA tentative nonconfirmation visits an SSA field office and provides the required evidence. If the employee visits an SSA field office within the eight Federal Government work days from the date of referral to SSA, SSA agrees to update SSA records, if appropriate, within the eight-day period unless SSA determines that more than eight days may be necessary. In such cases, SSA will provide additional instructions to the employee. If the employee does not visit SSA in the time allowed, E-Verify may provide a final nonconfirmation to the E-Verify Employer Agent. Note: If an Employer experiences technical problems, or has a policy question, the employer should contact E-Verify at 1-888-464-4218. E. RESPONSIBILITIES OF DHS 1. DHS agrees to provide the Employer with selected data from DHS databases to enable the Employer (through the E-Verify Employer Agent) to conduct, to the extent authorized by this MOU: A. Automated verification checks on alien employees by electronic means, and B. Photo verification checks (when available) on employees. 2. DHS agrees to assist the E-Verify Employer Agent with operational problems associated with its participation in E-Verify. DHS agrees to provide the E-Verify Employer Agent names, titles, addresses, and telephone numbers of DHS representatives to be contacted during the E-Verify process. 3. DHS agrees to provide to the E-Verify Employer Agent with access to E-Verify training materials as well as Company ID Number:571783 Client Company ID Number:1263530 Page 6 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1161 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) an E-Verify User Manual that contain instructions on E-Verify policies, procedures, and requirements for both SSA and DHS, including restrictions on the use of E-Verify. 4. DHS agrees to train E-Verify Employer Agents on all important changes made to E-Verify through the use of mandatory refresher tutorials and updates to the E-Verify User Manual. Even without changes to E-Verify, DHS reserves the right to require E-Verify Employer Agents to take mandatory refresher tutorials. 5. DHS agrees to provide to the Employer (through the E-Verify Employer Agent) a notice, which indicates the Employer's participation in E-Verify. DHS also agrees to provide to the Employer anti-discrimination notices issued by the Office of Special Counsel for Immigration-Related Unfair Employment Practices (OSC), Civil Rights Division, U.S. Department of Justice. 6. DHS agrees to issue each of the E-Verify Employer Agent’s E-Verify users a unique user identification number and password that permits them to log in to E-Verify. 7. HS agrees to safeguard the information the Employer provides (through the E-Verify Employer Agent), and to limit access to such information to individuals responsible for the verification process, for evaluation of E- Verify, or to such other persons or entities as may be authorized by applicable law. Information will be used only to verify the accuracy of Social Security numbers and employment eligibility, to enforce the INA and Federal criminal laws, and to administer Federal contracting requirements. 8. DHS agrees to provide a means of automated verification that provides (in conjunction with SSA verification procedures) confirmation or tentative nonconfirmation of employees' employment eligibility within three Federal Government work days of the initial inquiry. 9. DHS agrees to provide a means of secondary verification (including updating DHS records) for employees who contest DHS tentative nonconfirmations and photo mismatch tentative nonconfirmations. This provides final confirmation or nonconfirmation of the employees' employment eligibility within 10 Federal Government work days of the date of referral to DHS, unless DHS determines that more than 10 days may be necessary. In such cases, DHS will provide additional verification instructions. ARTICLE III REFERRAL OF INDIVIDUALS TO SSA AND DHS A. REFERRAL TO SSA 1. If the Employer receives a tentative nonconfirmation issued by SSA, the Employer must print the notice as directed by E-Verify. The Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer agrees to provide written referral instructions to employees and instruct affected employees to bring the English copy of the letter to the SSA. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. After a tentative nonconfirmation, the Employer will refer employees to SSA field offices only as directed by E-Verify. The Employer must record the case verification number, review the employee information submitted to E-Verify to identify any errors, and find out whether the employee contests the tentative nonconfirmation. The Employer will transmit the Social Security number, or any other corrected employee information that SSA requests, to SSA for verification again if this review indicates a need to do so. 4. The Employer will instruct the employee to visit an SSA office within eight Federal Government work days. SSA will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 5. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. 6. The Employer agrees not to ask the employee to obtain a printout from the Social Security Administration number database (the Numident) or other written verification of the SSN from the SSA. B. REFERRAL TO DHS 1. If the Employer receives a tentative nonconfirmation issued by DHS, the Employer must promptly notify employees in private of the finding and provide them with the notice and letter containing information specific to the employee’s E-Verify case. The Employer also agrees to provide both the English and the translated notice and letter for employees with limited English proficiency to employees. The Employer must allow employees to contest the finding, and not take adverse action against employees if they choose to Company ID Number:571783 Client Company ID Number:1263530 Page 7 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1162 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) contest the finding, while their case is still pending. 2. The Employer agrees to obtain the employee’s response about whether he or she will contest the tentative nonconfirmation as soon as possible after the Employer receives the tentative nonconfirmation. Only the employee may determine whether he or she will contest the tentative nonconfirmation. 3. The Employer agrees to refer individuals to DHS only when the employee chooses to contest a tentative nonconfirmation. 4. If the employee contests a tentative nonconfirmation issued by DHS, the Employer will instruct the employee to contact DHS through its toll-free hotline (as found on the referral letter) within eight Federal Government work days. 5. If the Employer finds a photo mismatch, the Employer must provide the photo mismatch tentative nonconfirmation notice and follow the instructions outlined in paragraph 1 of this section for tentative nonconfirmations, generally. 6. The Employer agrees that if an employee contests a tentative nonconfirmation based upon a photo mismatch, the Employer will send a copy of the employee’s Form I-551, Form I-766, U.S. Passport, or passport card to DHS for review by: A. Scanning and uploading the document, or B. Sending a photocopy of the document by express mail (furnished and paid for by the employer). 7. The Employer understands that if it cannot determine whether there is a photo match/mismatch, the Employer must forward the employee’s documentation to DHS as described in the preceding paragraph. The Employer agrees to resolve the case as specified by the DHS representative who will determine the photo match or mismatch. 8. DHS will electronically transmit the result of the referral to the Employer within 10 Federal Government work days of the referral unless it determines that more than 10 days is necessary. 9. While waiting for case results, the Employer agrees to check the E-Verify system regularly for case updates. ARTICLE IV SERVICE PROVISIONS A. NO SERVICE FEES 1. SSA and DHS will not charge the Employer for verification services performed under this MOU. The Employer is responsible for providing equipment needed to make inquiries. To access E-Verify, an Employer will need a personal computer with Internet access. ARTICLE V MODIFICATION AND TERMINATION A. MODIFICATION 1. This MOU is effective upon the signature of all parties and shall continue in effect for as long as the SSA and DHS operates the E-Verify program unless modified in writing by the mutual consent of all parties. 2. Any and all E-Verify system enhancements by DHS or SSA, including but not limited to E-Verify checking against additional data sources and instituting new verification policies or procedures, will be covered under this MOU and will not cause the need for a supplemental MOU that outlines these changes. B. TERMINATION 1. The Employer may terminate this MOU and its participation in E-Verify at any time upon 30 days prior written notice to the other parties. In addition, any Employer represented by the E-Verify Employer Agent may voluntarily terminate this MOU upon giving DHS 30 days’ written notice. 2. Notwithstanding Article V, part A of this MOU, DHS may terminate this MOU, and thereby the Employer’s participation in E-Verify, with or without notice at any time if deemed necessary because of the requirements of law or policy, or upon a determination by SSA or DHS that there has been a breach of system integrity or security by the Employer, or a failure on the part of the Employer to comply with established E-Verify procedures and/or legal requirements. The Employer understands that if it is a Federal contractor, termination of this MOU by any party for any reason may negatively affect the performance of its contractual responsibilities. Similarly, the Employer understands that if it is in a state where E-Verify is mandatory, termination of this by any party MOU may negatively affect the Employer’s business. 3. An Employer that is a Federal contractor may terminate this MOU when the Federal contract that requires its Company ID Number:571783 Client Company ID Number:1263530 Page 8 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1163 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) participation in E-Verify is terminated or completed. In such cases, the Federal contractor must provide written notice to DHS. If an Employer that is a Federal contractor fails to provide such notice, then that Employer will remain an E-Verify participant, will remain bound by the terms of this MOU that apply to non- Federal contractor participants, and will be required to use the E-Verify procedures to verify the employment eligibility of all newly hired employees. 4. The Employer agrees that E-Verify is not liable for any losses, financial or otherwise, if the Employer is terminated from E-Verify. 5. Upon termination of the relationship between an Employer and their E-Verify Employer Agent, E-Verify cannot provide the Employer with its records. The Employer agrees to seek its records from the E-Verify Employer Agent. ARTICLE VI PARTIES A. Some or all SSA and DHS responsibilities under this MOU may be performed by contractor(s), and SSA and DHS may adjust verification responsibilities between each other as necessary. By separate agreement with DHS, SSA has agreed to perform its responsibilities as described in this MOU. B. Nothing in this MOU is intended, or should be construed, to create any right or benefit, substantive or procedural, enforceable at law by any third party against the United States, its agencies, officers, or employees, or against the Employer, its agents, officers, or employees. C. The Employer may not assign, directly or indirectly, whether by operation of law, change of control or merger, all or any part of its rights or obligations under this MOU without the prior written consent of DHS, which consent shall not be unreasonably withheld or delayed. Any attempt to sublicense, assign, or transfer any of the rights, duties, or obligations herein is void. D. Each party shall be solely responsible for defending any claim or action against it arising out of or related to E-Verify or this MOU, whether civil or criminal, and for any liability wherefrom, including (but not limited to) any dispute between the Employer and any other person or entity regarding the applicability of Section 403(d) of IIRIRA to any action taken or allegedly taken by the Employer. E. The Employer understands that its participation in E-Verify is not confidential information and may be disclosed as authorized or required by law and DHS or SSA policy, including but not limited to, Congressional oversight, E-Verify publicity and media inquiries, determinations of compliance with Federal contractual requirements, and responses to inquiries under the Freedom of Information Act (FOIA). F. The individuals whose signatures appear below represent that they are authorized to enter into this MOU on behalf of the Employer, the E-Verify Employer Agent, and DHS respectively. The Employer understands that any inaccurate statement, representation, data or other information provided to DHS may subject the Employer, its subcontractors, its employees, or its representatives to: (1) prosecution for false statements pursuant to 18 U.S.C. 1001 and/or; (2) immediate termination of its MOU and/or; (3) possible debarment or suspension. G. The foregoing constitutes the full agreement on this subject between DHS, the Employer, and the E-Verify Employer Agent. Transportation Control Systems Inc (Employer) hereby designates and appoints Daniel Martinez (E- Verify Employer Agent), including its officers and employees, as the E-Verify Employer Agent for the purpose of carrying out (Employer) responsibilities under the MOU between the Employer, the E-Verify Employer Agent, and DHS. Company ID Number:571783 Client Company ID Number:1263530 Page 9 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1164 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) If you have any questions, contact E-Verify at 1-888-464-4218. Approved by: Employer Transportation Control Systems Inc Name (Please Type or Print) Michele Zucco Title Signature Electronically Signed Date January 21, 2018 E-Verify Employer Agent Paylocity Corporation Name (Please Type or Print) Daniel Martinez Title Signature Electronically Signed Date January 21, 2018 Department of Homeland Security – Verification Division Name USCIS Verification Division Title Signature Electronically Signed Date January 21, 2018 Company ID Number:571783 Client Company ID Number:1263530 Page 10 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1165 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Information Required for the E-Verify Program Information relating to your Company: Company Name Transportation Control Systems Inc Company Facility Address 1030 South 86th Street Tampa, FL 33619 Company Alternate Address 1030 South 86th Street Tampa, FL 33619 County or Parish Hillsborough Employer Identification Number 59-1673144 North American Industry Classification Systems Code Merchant Wholesalers, Durable Goods (423) Parent Company Number of Employees 20 to 99 Number of Sites Verified for 1 Company ID Number:571783 Client Company ID Number:1263530 Page 11 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1166 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Are you verifying for more than 1 site? If yes, please provide the number of sites verified for in each State: Florida 1 Company ID Number:571783 Client Company ID Number:1263530 Page 12 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1167 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Information relating to the Program Administrator(s) for your Company on policy questions or operational problems: Name Michele Zucco Phone Number (813) 486-6348 Fax Number Email Address michele@livinghr.com Company ID Number:571783 Client Company ID Number:1263530 Page 13 of 13 | E-Verify MOU for Employers Using an E-Verify Employer Agent | Revision Date 06/01/13 16.A.21.s Packet Pg. 1168 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Department of State /Division of Corporations /Search Records /Detail By Document Number / Document Number FEI/EIN Number Date Filed State Status Last Event Event Date Filed Event Effective Date Detail by FEI/EIN Number Florida Profit Corporation TRANSPORTATION CONTROL SYSTEMS INC. Filing Information 503739 59-1673144 05/20/1976 FL ACTIVE CORPORATE MERGER 11/25/2009 11/30/2009 Principal Address 1030 S 86TH STREET TAMPA, FL 33619 Changed: 05/28/2002 Mailing Address 1030 S 86TH STREET TAMPA, FL 33619 Changed: 05/28/2002 Registered Agent Name & Address Jenkins, Andrew Bush Ross 1801 N. Highland Ave TAMPA, FL 33602 Name Changed: 03/09/2019 Address Changed: 03/09/2019 Officer/Director Detail Name & Address Title ST GILLIS, PATRICIA A 908 RIVIERA DUNES WAY PALMETTO, FL 34221 DIVISION OF CORPORATIONSFlorida Department of State Page 1 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.s Packet Pg. 1169 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Title D GILLIS, PATRICIA A 908 RIVIERA DUNES WAY PALMETTO, FL 34221 Title PD GILLIS, STEVE TYLER 2918 W. TAMBAY TAMPA, FL 33611 Annual Reports Report Year Filed Date 2017 02/20/2017 2018 02/26/2018 2019 03/09/2019 Document Images 03/09/2019 -- ANNUAL REPORT View image in PDF format 02/26/2018 -- ANNUAL REPORT View image in PDF format 02/20/2017 -- ANNUAL REPORT View image in PDF format 02/01/2016 -- ANNUAL REPORT View image in PDF format 01/12/2015 -- ANNUAL REPORT View image in PDF format 01/08/2014 -- ANNUAL REPORT View image in PDF format 03/13/2013 -- ANNUAL REPORT View image in PDF format 01/04/2012 -- ANNUAL REPORT View image in PDF format 01/17/2011 -- ANNUAL REPORT View image in PDF format 02/17/2010 -- ANNUAL REPORT View image in PDF format 11/25/2009 -- Merger View image in PDF format 03/04/2009 -- ANNUAL REPORT View image in PDF format 04/14/2008 -- ANNUAL REPORT View image in PDF format 03/12/2007 -- ANNUAL REPORT View image in PDF format 04/17/2006 -- ANNUAL REPORT View image in PDF format 02/11/2005 -- ANNUAL REPORT View image in PDF format 02/07/2004 -- ANNUAL REPORT View image in PDF format 05/01/2003 -- ANNUAL REPORT View image in PDF format 05/28/2002 -- ANNUAL REPORT View image in PDF format 04/10/2001 -- ANNUAL REPORT View image in PDF format 01/02/2001 -- Amendment View image in PDF format 04/17/2000 -- ANNUAL REPORT View image in PDF format 04/29/1999 -- ANNUAL REPORT View image in PDF format 05/05/1998 -- ANNUAL REPORT View image in PDF format 04/18/1997 -- ANNUAL REPORT View image in PDF format 05/01/1996 -- ANNUAL REPORT View image in PDF format 04/25/1995 -- ANNUAL REPORT View image in PDF format Page 2 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.s Packet Pg. 1170 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Florida Department of State, Division of Corporations Page 3 of 3Detail by FEI/EIN Number 9/24/2019http://search.sunbiz.org/Inquiry/corporationsearch/SearchResultDetail?inquirytype=FeiNu... 16.A.21.s Packet Pg. 1171 Attachment: 19-7607 Transportation Control Proposal (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) See below RE:BID # 19-7607 "TRAFFIC OPERATIONS SIGNAL COMPONENTS & HARDWARE" Collier County Board of County Commissioners included as an additional insured under the captioned Commercial General Liability and Automobile Liability Automobile Liability Policies on a primary and non-con-contributory basis if and to the extent required by written contract. BID # 19-7607 "TRAFFIC OPERATIONS SIGNAL COMPONENTS & HARDWARE" TRANSCON5 11/6/2019 Certificate Dept Commercial Lines - (813) 639-3000 813 639 3000 855.299.7117 USI Insurance Services LLC clw_.certrequest@usi.com 2502 N. Rocky Point Drive, Suite 400 Tampa, FL 33607 Federal Insurance Company 20281 Great Northern Insurance Company 20303 Transportation Control Systems, Inc.Great American Insurance Company 16691 1030 South 86th Street Lloyd's of London QBE Specialty Insurance Company 11515 Tampa FL 33619 14656619 XA X 36024575 1,000,00001/16/2019 01/16/2020 X 1,000,000 10,000 1,000,000 2,000,000 X 2,000,000 B X 735604575 01/16/2019 01/16/2020 1,000,000 X X X X XC SBU409445404 01/16/2019 01/16/2020 2,000,000 2,000,000 A 71765334 01/16/2019 01/16/2020 X 500,000 500,000 500,000 A Employee Benefits Liability 36024575 01/16/201901/16/2019 01/16/2020 $1,000,000 Each Claim $1,000,000 Aggregate $1,000 Deductible (This certificate replaces certificate# 14656290 issued on 11/6/2019) COLLIER COUNTY BOARD OF COUNTY COMMISSIONERS 3295 TAMIAMI TRAIL EAST NAPLES, FL 34112 16.A.21.t Packet Pg. 1172 Attachment: 19-7607 TransportationControl_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware) Certificate of Insurance (Con't) Certificate Of lnsurance-Con't Client Code: TRANSCON5 SID: 14656619 OTHER Coverage INSR LTR TYPE OF INSURANCE ADDL INSR WVD SUBR POLICY NUMBER EFFECTIVE DATE (MM/DD/YY) EXPIRATION DATE (MM/DD/YY) LIMIT D Contractrors Equipment AMR-41860-04 01/01/2019 01/01/2020 $1,884,753 contractors equipment $5,000 aop ded. NS W&H ded 3% w $25K min. AO W&H ded $10K E Network Security Liability AMR4186003 01/16/2019 01/16/2020 $100,000Annual Aggregate $10,000 Per Occurrence Ded 3rd Party Business Information - Incl 16.A.21.t Packet Pg. 1173 Attachment: 19-7607 TransportationControl_Insurance (11066 : Bid (ITB) No. 19-7607, "Traffic Operations Signal Components and Hardware)