#11-5782 Amendment #3 (AECOM Technical Services, Inc.) AEECOM AECOM Technical Services,Inc. 213.593.8100 tel
300 South Grand Avenue 213.593.8730 fax
9'h Floor
Los Angeles,CA 90071
www.aecom.com
SECRETARY'S CERTIFICATE
AECOM TECHNICAL SERVICES, INC.
a California corporation
I, Charles F. Szurgot, DO HEREBY CERTIFY that I am the duly elected and acting
Secretary of AECOM Technical Services, Inc., a corporation organized under the laws of the
State of California("ATS"or"Corporation"), and the keeper of its records and corporate
seal.
I FURTHER CERTIFY that ATS's full legal address is do CT Corporation System,
818 West 7th Street, Los Angeles, CA 90017-0000 and that the Corporation's principal place
of business is 300 South Grand Avenue, 9th Floor, Los Angeles, California 90071.
I FURTHER CERTIFY that pursuant to the Written Consent of the Board of
Directors of ATS, adopted on October 8, 2018, and attached hereto as Exhibit A, C. Scott
Lee has signatory authority for ATS and is authorized to execute contracts and other
documents on behalf of the Corporation.
IN WITNESS WHEREOF, I have subscribed my name and affixed the seal of the
Corporation, this 18th day of December, 2018.
Charles F. Szurgot
Secretary
UNANIMOUS ACTION OF THE BOARD OF DIRECTORS
OF
AECOM TECHNICAL SERVICES, INC.
The undersigned, being all the members of the Board of Directors of AECOM TECHNICAL SERVICES, INC. (the
"Corporation"), a California corporation, hereby take the following action:
RESOLVED: That the previous elections of Signatories and Supplemental Signatories of the Corporation dated
August 23, 2018, be superseded in its entirety; and
RESOLVED: That, in addition to all Senior Vice Presidents and above as set forth in Article IX, Section 16 of the
Restated By-Laws as amended, the following U.S. based persons are designated with authority by the Board of
Directors to execute contracts and other legal documents on behalf of the Corporation within the boundaries of
specific Regions and Business Lines as noted and effective as of the dates set forth below:
Effective October 8, 2018:
7 4 1. a -r T-4424-
z ® Ali' fi,�- "e i ce,€ t v t A44, 4;44 . tc„
Lee C.Scott Southeast I Miami Metro Water
THIRD AMENDMENT TO AGREEMENT# 11-5782
FOR
WASTEWATER BASIN ANALYSIS (BASIN 3)
THIS AMENDMENT,made and entered into on this '` day ofx-0\of County by and between AECOM Technical Services, Inc., (the "Consultant") and the Boar ounty
Commissioners for Collier County, Florida, a political subdivision of the State of Florida, (the
"County" or"Owner"):
WHEREAS, on September 11, 2012 (Agenda Item 11.E), the County entered into an
Agreement with Consultant to perform professional engineering services for three design contracts for
the "Wastewater Basin Analysis"program in the amount of$1,870,468; and
WHEREAS, on January 9, 2013, the County temporarily suspended the project, which
resulted in extending the project by twenty-eight(28)days; and
WHEREAS, on October 14, 2014 (Agenda Item 11.D), the County approved the First
Amendment to the Agreement to increase the contract time for an additional three years to include
services associated with the bidding phase, post design, and additional design services through
construction in the amount of$1,476,040; and
WHEREAS, on October 13, 2018 (Agenda Item 11.D), the County approved the Second
Amendment to the Agreement to increase the contract time for an additional three years for Contract
Administration(Post Design Services)during construction; and
WHEREAS, the parties desire to further amend the Agreement to include the Construction
Phase Services, MPS 306 PLC and HMI Programming; two additional positions and to increase all
personnel rates.
NOW, THEREFORE, in consideration of the mutual promises and covenants herein
contained, it is agreed by the parties as follows:
1. County and the Consultant agree to adopt and incorporate the foregoing recitals,
sometimes referred to as "whereas clauses"by reference into this Third Amendment to Agreement# 11-
5782.
2. The additional services shall be provided in accordance with the attached Schedule A-3
Scope of Services for Agreement# 11-5782 "Wastewater Basin Analyses (MPS 306)," which is hereby
incorporated into the Agreement.
3. The fees for the additional services stated in Schedule A-3 shall be in accordance with
Schedule B-3, attached hereto and incorporated into the Agreement, and Attachment 1 Schedule B-3 is
replaced in its entirety for services rendered in Amendment 3.
Words k Through are deleted; Words Underlined are added
Page 1 of 13
Amendment#3-AECOM#11-5782
4. Schedule F-3 Key Personnel, Subconsultants and Subcontractors is attached hereto and
incorporated into the Agreement for services outlined in Schedule A-3.
IN WITNESS WHEREOF, the parties hereto, have each executed this Amendment by an
authorized person or agent on the date and year first written above .
ATTEST:
Crystal K. Kinzel, Clerk of Courts& BOARD OF COUNTY COMMISSIONERS
Comptroller COLLIER CO /• TY, FLORIDA
/P/' .
By. — B IA
f• • Solis, Chairman
Dated: ' "\
(SEAL), -
Attest as to Chairmap1s
signature only
Consultant's Witnesses: CONSULTANT:
Cr. .4' GMAJAQ:A/C AECOM Technical Services, Inc.
By: C 5—co
le....--
First Witness Signature
R(3(1\Aket eaVai(e_IN1 \7lLL? PILL'51DLw7
TType/print witness name?' tType/print signature and titleT
`atIAA:t €. -64)10. 1A /�
Second Witness 12 V 1 0/j 0
Date
Cherie C. Wolfe ie.
TType/print witness nameT
A, .rov-. . . to / an)Leg;
ity:
P- • ty County Attorney
SeA )1 02 - ettL
Print Name
h0 e
Page 2 of 13
Amendment#3-AECOM#11-5782
SCHEDULE A-3
SCOPE OF SERVICES
Bayshore-MPS 306 Wastewater Basin Analyses
Scope of Services
The COUNTY has requested CONSULTANT to provide additional construction phase services
including,PLC and HMI Programming for MPS 306. Task numbers follow the tasks defined in contract
amendment#1 as noted below:
• Task 4: MPS 306
Construction Phase services will be provided for MPS 306. There are additional work tasks included in
the scope of services for the Construction Phase Services provided for MPS 306, since it is a more
complex construction project. The Construction Phase Services subtask will be identified as:
• Subtask 4b: Construction Phase Services
***
The scope of work for Subtask 4b is described below.
Subtask 4b - Construction Phase Services—MPS 306
During construction of the projects, CONSULTANT will provide construction phase services.
The construction phase services will include the following:
1. Attend pre-construction meeting and assist the COUNTY with the preparation of the meeting
minutes.
2. Prepare conformed set of original signed and sealed construction documents. Furnish 5 copies
of conformed documents to the COUNTY.
3. Attend biweekly construction progress meetings and assist the COUNTY with the preparation of
the meeting minutes. The construction schedule will be reviewed during the progress meetings,
and recommendations required to maintain/improve the schedule will be made to the Contractor.
Biweekly progress meetings will be attended by the Project Manager and Project Engineer.
Technical leaders for supporting disciplines (i.e. electrical, structural, I&C, building mechanical
and architectural)will also participate in project meetings via conference call as needed.
4. Visit the site of the proposed improvements periodically to observe the construction areas
designated on the construction plans in cooperation with the COUNTY's staff. Site visits will be
conducted in conjunction with progress meetings, or as requested by the COUNTY.
5. CONSULTANT will review and take appropriate action in respect to Shop Drawings and
Samples defined in specifications and the Contractor's Schedule but only for conformance with
the information given in the Contract Documents and compatibility with the design concept of
the completed Project as a functioning whole as indicated by the Contract Documents. Such
Page 3 of 13
e
Amendment#3-AECOM#11-5782
reviews will not extend to means,methods,techniques, sequences, or procedures of construction
or to safety precautions and programs incidental thereto. CONSULTANT will prepare and
maintain a log of submittals to include submittal number, subject, and date received, reviewer,
action taken,and date returned. Shop Drawings re-submitted more than two times will be deemed
Additional Services.
6. Prepare responses to Contractor's Requests-for-Information (RFIs). Issue necessary
clarifications and interpretations of the Contract Documents as appropriate to the orderly
completion of the Work. Such clarifications and interpretations are to be consistent with the intent
of and reasonably inferable from the Contract Documents.Prepare sketches as required to support
responses to RFIs. CONSULTANT will also prepare and maintain a log of all such received
requests, noting the date received, subject, resolution and date response was returned to the
Contractor. If RFIs are resubmitted more than two times, they will be deemed to be Additional
Services.
7. Assist COUNTY with management of proposed Changes to the Work by preparing Requests-
for-Proposed-Change (RPCs) Quotation, evaluating RPC quotes, evaluating and responding to
Contractor claims for time extension or additional compensation, and preparing contract change
orders for approval by COUNTY.
8. Provide consultation and advice to the COUNTY's Project Manager during construction and
coordinate project activities including Subconsultant services. SUBCONSULTANT will assist
CONSULTANT with post design services, which will include: attendance at preconstruction
meetings, responses to civil/site design RFIs, review of shop drawings related to site design,
periodic site visits,preparation of record drawings,attendance at substantial and final completion
inspections, and preparation of closeout documents (including certifications) for SFWMD and
Collier County Growth Management. Permit closeout will be completed to meet regulatory
requirements and to obtain a certificate of occupancy.
9. Assist the COUNTY with review of progress payments for duration of the contract. After receipt
and review of each application for payment from the Contractor, provide written notice to the
COUNTY recommending payment to the Contractor, or return the request to the Contractor
providing written notice of CONSULTANT's reason for disapproval.
10. Assist COUNTY with the following services related to Contract Closeout:
a. Perform a Substantial Completion walk through and develop final punch list in
conjunction with COUNTY's staff.
b. Prepare a"Certification of Substantial Completion."
c. Subsequent to the completion of all punch list items, CONSULTANT will perform a
Final Completion walk through in conjunction with COUNTY's staff.
d. Assist with review of final pay request. Upon receipt of the Contractor's request for final
payment, CONSULTANT will inspect and, if acceptable, submit to the COUNTY its
recommendation as to acceptance of the work and as to the final payment request of the
Contractor.
e. Prepare "As-Constructed" (record) drawings from information provided by the
Contractor required for project certifications. CONSULTANT will submit record
drawings to the appropriate regulatory agencies and provide the COUNTY with an
electronic copy of the record drawings.
e
Page 4 of 13
Amendment#3-AECOM#11-5782
11. CONSULTANT will coordinate Start-up Services
a. CONSULTANT will coordinate with equipment manufacturers for training and startup
services that will be provided by Contractor to the COUNTY's staff.
i. Start-up services will be attended by members of the design team (Project
Manager/Project Engineer and the HVAC or electrical engineer as required) to
ensure that items of equipment operate in accordance with specified design
parameters.
ii. Contractor will prepare a start-up plan and will submit the information to the
CONSULTANT and COUNTY for review and modification prior to actual
startup.
iii. Startup Testing for ancillary support systems will be documented.
b. CONSULTANT will provide additional start-up services associated with pumps and
control systems.
i. CONSULTANT will monitor pump station operational conditions including
pump station pressure and flows over 60-day period as required, a field program
will be developed to obtain pressures and flows in the wastewater conveyance
system to provide further information to evaluate pump station operation. A
subconsultant will be retained to place pressure transducers at ARV locations for
a one-week duration to verify system pressures. A subconsultant will complete
indirect flow monitoring at the COUNTY owned duplex pump stations by
monitoring water surface elevations in the wet wells and pump run times over the
same one-week period that pressure is being monitored.
ii. CONSULTANT will fine tune pressure settings for anticipated flow ranges
associated with pumps running. Field reports will be generated to document
system conditions.
iii. CONSULTANT will work with Collections staff and provide three days of
training on pump system settings and operational controls. CONSULTANT will
use field reports and O&M document to assist with this training.
iv. Additional Engineering Services will be provided to evaluate alternative pump
station configurations and needed improvements to improve the pump station
operations. As required additional hydraulic modeling will be completed to
simulate various wastewater conveyance system conditions.
12. CONSULTANT will assemble/prepare O&M Manuals.
a. CONSULTANT will assemble equipment O&M manuals from the Contractor into one
binder and submit to the COUNTY. The manual will be prepared in sufficient time to
accommodate staff training to be done by equipment vendors prior to equipment startup.
O&M Manual will include:
i. Original manufacturer's literature and prints of shop drawings in each copy of the
manual.Manufacturer's literature and shop drawings are to be organized and filed
by equipment identification number. Each piece of equipment discussed in the
manual will have a reference section that will include,at a minimum,reference to
the project specifications by specification number and drawing by number.
ii. The O&M manual will also include preventative maintenance requirements,spare
part lists, and startup/shut down requirements from the manufacturer.
iii. CONSULTANT will maintain an O&M Submittal log. CONSULTANT will
submit an electronic copy of the draft manual to the COUNTY for review. After
addressing comments from the COUNTY,five copies of the final manual and one
electronic copy will be delivered to the COUNTY.
rAo
Page 5of13
Amendment#3-AECOM#11-5782
b. CONSULTANT will prepare Site Specific O&M Manual for MPS 306.
i. Alternative Pump Stations Discharge Locations will be documented with Process
Flow Diagrams and MOV schematics.
ii. Pump Control Strategy will be documented with final pressure settings and
anticipated flow ranges for various pumps running.
iii. Design Pump Curves and Startup Pump Curves will be documented.
iv. COUNTY recommendations to improve pump station operations will be
evaluated and implemented in the Manual.
v. A draft Site Specific O&M Manual will be furnished to the COUNTY for review
in electronic format. Five copies of the final manual and one electronic copy will
be delivered to the COUNTY.
13. CONSULTANT will assist the COUNTY with preparing asset management spreadsheets for new
process equipment provided at the Master Pump Station. COUNTY will provide format and
required data.
14. MPS 306 PLC and HMI Programming.
CONSULTANT will complete the PLC/HMI programming associated with the construction of
the Proposed MPS 306 in accordance with the following technical specifications and drawings
issued as part of the bidding documents for Collier County Proposed Master Pump Station 306
dated April 9, 2018 and amended by bid addendum#8:
• Technical Specification 40 93 00 Instrumentation and Control
• Technical Specification 40 93 00 A Control Description
• Technical Specification 40 93 01 IO Table
• Instrumentation Drawings I-001 through I-111.
a. Project Coordination, Management and Meetings
CONSULTANT will conduct a programming kick-off meeting. The meeting will include
discussions of project scope, client objectives and expectations, programming schedule,
and will focus on a review of the COUNTY standards for programming and DFS SCADA
integration. This meeting will be attended by Project Manager and local I&C Engineer.
The CONSULTANT's Programmer will be attending via conference call. Meeting
minutes will be prepared and will document the key issues discussed at this meeting.
Project coordination and management will be completed for the duration of programming
services.
b. Programming
CONSULTANT will develop the PLC and HMI programming for the MPS 360 Pump
Station, in accordance with the Control Description noted in Section 40 93 00 A Control
Description. The PLC is an Allen-Bradley ControlLogix, and the HMI is Allen-Bradley
PanelView Plus. Based upon the technical specifications and drawings issued as part of
the bidding documents for Collier County Proposed Master Pump Station 306 dated April
9, 2018 and amended by bid addendum#8, programming of no more than 275 IO points
will be completed herein.
PLC programs will be documented with labels and comments explaining logical functions
Page 6 of 13 0
Amendment#3-AECOM#11-5782
and operation.
The HMI graphics will be developed in close coordination with COUNTY staff. HMI
graphics will be developed to match the DFS graphics as programmed and provided by
the COUNTY. HMI displays will be submitted to the COUNTY for review and feedback
prior to completion of the HMI application and subsequent testing.
If the Optional Task for a Graphics Workshop is included by COUNTY in the scope of
work, CONSULTANT will work with the COUNTY to apply existing COUNTY
graphics standards to both the DFS and HMI graphics as described in Optional Task G.
CONSULTANT will thoroughly test the PLC, HMI and with assistance from COUNTY
the DFS SCADA applications together by simulating control functions,alarms,status and
instrument displays to verify that all components of the system function as expected.
c. Commissioning
Software commissioning will be conducted following completion of field installation and
demonstration of all monitored and controlled hardware. The PLC and HMI programs
will be installed in the PLC and HMI units, and basic monitoring and control interfaces
will be thoroughly tested with the process equipment. Instrument calibrations and input
scaling will be tested,verified,and/or updated as necessary.Control outputs will be tested
to demonstrate expected responses from process equipment and updated as necessary.
Each control algorithm will be implemented and tested to verify operation. Initial control
loop tuning will be conducted to achieve effective performance. Close cooperation
between the Contractor and Contractor's integrator will be required to successfully
complete this activity.
d. Site Acceptance Testing
Following successful completion of commissioning activities, a Final Site Acceptance
Test (SAT) will be performed. This test will be scheduled and coordinated by the
CONSULTANT and will require participation by the Contractor and Contractor's
integrator. All monitoring and control loops will be tested for performance and
documented.
e. DFS SCADA O&M Manual
A DFS SCADA O&M Manual will be provided, to document the use of the HMI and
SCADA displays. The DFS SCADA O&M Manual will include screen captures of the
displays, with explanation of how to navigate and use the HMI and DFS SCADA
Operator Interfaces. A draft DFS SCADA O&M Manual will be submitted to COUNTY
in electronic format for review and comment. CONSULTANT will address COUNTY
comments and issue a Final DFS SCADA O&M Manual in electronic format.
f. Training
CONSULTANT will prepare for and provide training in two phases. Training sessions in
each phase will include a minimum of three (3) days of training instruction to the
COUNTY's personnel.
The first phase of training will include one day of Operator training,based on the Control
Description and the DFS SCADA O&M Manual, to train Operations staff on the it
Page 7 of 13
Amendment#3-AECOM#11-5782
functionality of the facility, and the use of the HMI and DFS SCADA. In addition, two
days will be PCP and Controls system maintenance training, to train Maintenance staff
about the control system and the PLC/HMI software applications.
The second phase of training will include one day for review of Phase 1 Training,
including basic operator training, PCP, Controls system maintenance, and software
maintenance. Days two and three of Phase 2 training will include control system
operational details, instrumentation and control equipment maintenance instruction, and
training on additional details as requested by the COUNTY's personnel. Phase 2 training
will occur a minimum of four (4) weeks following completion of Phase 1 training, and
prior to Final Acceptance.
g. Graphics Workshop—DFS/HMI Coordination—OPTIONAL PROGRAMMING TASK
At the option of the COUNTY, Graphic Design Workshops will be held with COUNTY
staff to facilitate the design and development of graphic screens, and associated operator
interface functionality,to allow local and remote monitoring and control of Master Pump
Station 306. Work includes the following:
Conduct two half-day workshops with COUNTY. The intent of the first workshop is to
review the Control Strategies for MPS 306 and identify a preliminary list of graphics
needed for control and monitoring of MPS 306, which is anticipated to include: electric
pumps, generators, diesel pumps, motor actuated valve positions at MPS 302, motor
actuated valve positions at MPS 306, and fuel oil system. In addition, a review will be
completed of existing MPS graphics in the DFS system,and a determination will be made
of preferred approach for graphic depiction and interface to MPS 306. The intent will be
to follow existing COUNTY standards and conventions as much as possible, and also
maintain similarity in appearance and function between the DFS graphics and HMI
graphics. CONSULTANT will prepare initial diagrams of HMI graphic screens based
upon Workshop 1. A maximum of 10 graphic screens will be developed. A second
workshop will be conducted to review the draft HMI graphics and make necessary
revisions.
Deliverables:
• Draft and Final Graphic Screen diagrams (electronic format)
• HMI functional descriptions (electronic format)
h. Software Factory Acceptance Testing—OPTIONAL PROGRAMMING TASK
At the option of the COUNTY, a Software Factory Acceptance Test (SFAT) will be
scheduled and conducted to demonstrate performance of the completed PLC and HMI
software programming. The SFAT is intended to demonstrate complete software
functionality in an off-line environment. Process simulation routines will be used to
simulate process conditions and responses to control functions performed by the PLC
logic. Process control functions as described in the control strategy narratives will be
demonstrated to confirm control intentions as designed and verify that the software will
interface with the process monitoring and control devices in a realistic manner.
The test will be conducted at the CONSULTANT's facilities.
Since this is an off-line demonstration, actual process feedback cannot be included, but
Page 8 of 13
Amendment 43-AECOM#11-5782
will be simulated as effectively as practical.
i. Assistance over the First Year of Operation—OPTIONAL PROGRAMMING TASK
At the option of the COUNTY, CONSULTANT will assist COUNTY with
troubleshooting programming issues over a one-year period.
Certain assumptions have been made in developing the fee for services. To the extent
possible, they are stated in this proposal. If changes to the work result in changes in the
level of effort presented in this proposal the scope of services and fee budget will be
revised by mutual agreement.
DELIVERABLES
All deliverables shall be furnished in MSWord or AutoCAD and Adobe pdf format. The following
deliverables are anticipated:
1. Five (5)hard copy sets of conformed construction documents (Tasks 4b(2)).
2. Certifications of substantial completion(Tasks 4b(10)).
3. Final certifications for permitting agencies (Task 4b(8)).
4. One (1) set of record drawings in electronic format(Tasks 4b(10)).
5. Draft and Final equipment O&M Manuals. Draft equipment O&M Manual will be submitted in
electronic format. Final O&M Manuals will be submitted in electronic format and five hard
copies will be provided. (Tasks 4b(12a)).
6. Draft and Final site specific O&M Manuals.Draft equipment O&M Manual will be submitted in
electronic format. Final O&M Manuals will be submitted in electronic format and five hard
copies will be provided.(Task 4b(12b).
7. Draft and Final List of assets in form of Collier County asset management hierarchy (Tasks
4b(13)).
8. Field Reports (electronic copies) documenting pump station conditions and control settings
during 60 days of startup services. (Task 4b(11)).
9. At Option of COUNTY, Draft and Final DFS SCADA O&M Manual (electronic format) (Task
4b(14e).
10. At Option of COUNTY, Draft and Final Graphic Screen diagrams (electronic format) (Task
4b(14g).
11. At Option of COUNTY, HMI functional descriptions (electronic format) (Task 4b(14g).
SUBCONSULTANTS
Q Grady Minor will be retained as a subconsultant to assist with the Construction Phase Services of MPS
306.Johnson Engineering will be retained for pressure monitoring and indirect flow monitoring services.
SCHEDULE
The services described herein will commence upon receipt by the CONSULTANT of a Notice- to-
Proceed and executed Work Order from the COUNTY and run concurrently with the original contract.
COUNTY RESPONSIBILITIES
1. COUNTY will designate a Project Representative, as COUNTY's representative and primary
contact for CONSULTANT. CONSULTANT will rely on COUNTY's designated Project it
•
Page 9 of 13
Amendment#3-AECOM#11-5782
Representative for instructions and approval of CONSULTANT's services.
2. COUNTY will attend all required meetings and provide feedback in a timely manner.
3. COUNTY will provide CONSULTANT access to the project area.
4. COUNTY will provide CONSULTANT remote access to PLCs/HMIs and DFS system as
needed.
5. COUNTY will provide an inspector for on-site inspection of the work. Inspector will be
responsible for reviewing the materials and workmanship of the Contractor and report to the
CONSULTANT any deviations from the contract documents. Inspector will prepare daily
inspection reports, maintain field notes and field construction photographs and maintain
appropriate field records.
6. COUNTY agrees that in accordance with generally accepted construction practices, any
Contractor employed by COUNTY to perform work in connection with the Project, will be
required to assume sole and complete responsibility for job site conditions during the course of
construction of the Project,including safety of all persons and property,and that this requirement
shall be made to apply continuously and not be limited to normal working hours.CONSULTANT
shall not have control over or charge of, and shall not be responsible for, construction means,
methods, techniques, sequences or procedures, as these are solely the responsibility of the
Contractor. CONSULTANT will represent COUNTY in accordance with the responsibilities of
the CONSULTANT described in and Standard General Conditions of the Construction Contract
and any mutually agreeable Special Conditions specific to the Project.
CONSTRUCTION CONTRACTOR RESPONSIBILITIES
CONSULTANT will be the Programmer for the PLC, HMI software applications. The Contractor will
be responsible for all other scope as defined in the contract documents. This includes, but is not limited
to,the following:
1. Design/build the PLC panel with HMI.
2. Provide all hardware and software licenses.
3. Conduct the PLC panel FAT. Provide test documentation.
4. Procure, install, configure and commission instrumentation, communication hardware, etc.
5. Install and configure all PLC,HMI, and SCADA software, and demonstrate functionality.
6. Demonstrate communications.
7. Pre-test all I/O wiring prior to the UO verification.
8. Lead the I/O verification(after pre-testing),to be witnessed by CONSULTANT.
9. Commission the facility and conduct SAT, with CONSULTANT providing the software
application support.
***
0
Page 10 of 13
Amendment#3-AECOM#11-5782
SCHEDULE B-3
BASIS OF COMPENSATION
***
2. COMPENSATION TO CONSULTANT
B.2.1. For the Basic Services provided for in this Agreement, the OWNER agrees to make monthly
payments to CONSULTANT based upon CONSULTANT'S Direct Labor Costs and Reimbursable
Expenses in accordance with the terms stated below. Provided, however, in no event shall such
compensation exceed the amounts set forth in the table below.
Tasks PHASE II NOT TO EXCEED AMOUNT
Subtask 4b (1-14): Construction Phase $923,344
Basic Services Time& Materials
Not-To-Exceed
***
Page 11 of 13
Amendment#3-AECOM#11-5782
ATTACHMENT 1 TO SCHEDULE B-3
INDEX TITLE COST PER HOUR
1 Principal $225.00
2 Senior Project Manager $188.00
3 Project Manager $160.00
4 Senior Engineer $171.00
5 Engineer $134.00
6 Senior Inspector $105.00
7 Inspector $83.00
8 Senior Planner $152.00
9 Planner $120.00
10 Senior Designer $124.00
11 Designer $103.00
12 Environmental Specialist $119.00
13 Senior Environmental Specialist $146.00
14 Scientist/Geologist $101.00
15 Senior Scientist/Geologist $129.00
16 Marine Biologist/Hydrogeologist $120.00
17 Senior Marine Biologist/Hydrogeologist $150.00
18 Senior GIS Specialist $152.00
19 GIS Specialist $111.00
20 Clerical/Administrative $68.00
21 Senior Technician $93.00
22 Technician $78.00
23 Surveyor and Mapper $131.00
24 CADD Technician $88.00
25 Survey Crew-2 man $142.00
26 Survey Crew-3 man $176.00
27 Survey Crew-4 man $206.00
28 Senior Architect $168.00
29 Architect $132.00
30 Senior Programmer $113.00
31 Programmer $103.00
C
Page 12 of 13
Amendment#3-AECOM#11-5782
SCHEDULE F-3
KEY PERSONNEL
KEY PERSONNEL POSITION COMPANY %TIME
ALLOCATION
Ronald Cavalieri Principal AECOM 1
Dawn Jakiela Principal AECOM 3_2
William Overbeek Senior Project Manager AECOM 15.8
John Rector Project Manager AECOM 4_5
Ira Brandell Senior Engineer AECOM 14.8
Jordan Moulton Engineer AECOM 29.5
Amy Walker Senior Designer AECOM 4
Cherie Wolter Clerical/Administrative AECOM 11.1
Marguerite Boivin CADD Technician AECOM 0_3
Alex Cheung Programmer AECOM 15.8
ft
Page 13 of 13
Amendment#3-AECOM#11-5782