Exhibit YY Gateway MXD StdsB. Dimensional and Design Standards for the GTMUD.
1. Mixed Use Subdistrict (GTMUD-MXD).
a. Specific District Provisions:
i. Maximum Density: 12 units per acre comprised of density allowed by the underlying zoning district and
available density bonuses.
ii. Lot and Building Dimensional Requirements: Lot and building dimensional requirements for new
development are provided below. These requirements shall be based on the building type of the principal
structure(s) as described in section 4.02.16 D., Building Types and Architectural Standards.
Table 7. Dimensional Requirements in the GTMUD-MXD
House1 Rowhouse2 Apartment Mixed-Use Commercial Civic &
Institutional
Min. Lot Width (ft) 50 253 100 100 1005 100
Min. Front Yard (ft) 10 10 10 6.56 6.56 10
Min. Side Yard (ft) 7.5 5 7.5 10 10 10
Min. Rear Yard (ft) 15 15 20 5 5 15
Min. Waterfront Setback
(ft)
25 25 25 25 25 25
Min. Floor Area (sq ft) 1,100 1,000 750 per
unit
700 per
unit
700 per unit n/a
Min. Building Separation n/a n/a 10 10 10 10
Max. Building Height (ft)4 42 42 42 567 567 42
Notes:
1 See 4.02.16.B.3 regarding Duplexes.
2 See 4.02.16.B.3 regarding Two-Family Dwellings.
3 Applies to individual unit.
4 Zoned Height of Building.
5 Property zoned C-3 shall have a minimum lot width of 75 feet.
6 Development in the Mini-Triangle Area of the GTMUD-MXD subdistrict shall have a maximum setback of
20 feet.
7 MUPs in the Mini-Triangle Area of the GTMUD-MXD subdistrict shall have a maximum zoned building
height of 112 feet.
2. Residential Subdistrict (GTMUD R).
a. Specific District Provisions:
i. Maximum Density is based on maximum density allowed by the underlying zoning district and any available
density bonuses.
ii. Lot and Building Dimensional Requirements: Lot and building dimensional requirements for new
development are provided below. These requirements shall be based on the building type of the principal
structure(s) as described in section 4.02.16 D, Building Types and Architectural Standards.